[Openstack] Network setup with floating IP
Cristian Falcas
cristi.falcas at gmail.com
Tue Aug 6 07:44:22 UTC 2013
external gateway is supposed to be down, I think: I have floating IP
working and the external network is down.
Cristi Falcas
On Tue, Aug 6, 2013 at 9:03 AM, Batsayan Das <batsayan.das at tcs.com> wrote:
>
> Hello,
>
> I am trying to deploy devstack in Dell R910 with Ubuntu 12.04 as host OS. I
> installed devstack in the scripted manner as mentioned in
> http://docs.openstack.org/trunk/openstack-compute/install/apt/content/scripted-dev-installation.html
>
>
> My intention is to create CentOS VMs with following property.
> 1. VMs should be able to ping each other
> 2. VMs are accessible by ssh from any host in 10.135.0.XX network
> 3. VMs should be connected to open internet.
>
> To do this I am following the All-In-One: Dedicated Hardware method
> mentioned in http://devstack.org/guides/single-machine.html
>
> My localrc contains the following
> condor at r910:~/devstack$ cat localrc
> disable_service n-net
> enable_service q-svc
> enable_service q-agt
> enable_service q-dhcp
> enable_service q-l3
> enable_service q-meta
> enable_service quantum
> # Optional, to enable tempest configuration as part of devstack
> enable_service tempest
> DATABASE_PASSWORD=condor
> RABBIT_PASSWORD=condor
> SERVICE_TOKEN=condor
> SERVICE_PASSWORD=condor
> ADMIN_PASSWORD=condor
>
> HOST_IP=192.168.161.138
> FLOATING_RANGE=192.168.161.224/28
> FLAT_INTERFACE=eth0
>
> Route information of the host
> condor at r910:~/devstack$ route -n
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use
> Iface
> 0.0.0.0 10.135.0.5 0.0.0.0 UG 100 0 0 eth1
> 10.0.0.0 192.168.161.225 255.255.255.0 UG 0 0 0 eth0
> 10.135.0.0 0.0.0.0 255.255.255.192 U 0 0 0 eth1
> 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0
> 172.24.4.224 0.0.0.0 255.255.255.240 U 0 0 0
> br-ex
> 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0
> virbr0
> 192.168.161.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
>
> Devstack External Gateway interface of the router is in DOWN state. Pls
> fined the attached screen shot.
>
> How can I make it ACTIVE state? What is the wrong I am making?
>
> Thanks for any help.
>
> Regards,
>
> Batsayan Das
> Tata Consultancy Services
> Mailto: batsayan.das at tcs.com
> Website: http://www.tcs.com
> ____________________________________________
> Experience certainty. IT Services
> Business Solutions
> Consulting
> ____________________________________________
>
> =====-----=====-----=====
> Notice: The information contained in this e-mail
> message and/or attachments to it may contain
> confidential or privileged information. If you are
> not the intended recipient, any dissemination, use,
> review, distribution, printing or copying of the
> information contained in this e-mail message
> and/or attachments to it are strictly prohibited. If
> you have received this communication in error,
> please notify us by reply e-mail or telephone and
> immediately and permanently delete the message
> and any attachments. Thank you
>
>
> _______________________________________________
> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to : openstack at lists.openstack.org
> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>
More information about the Openstack
mailing list