Open Stack

Oops... I was using from another example with same problem:

%s/bank2-disk0_vorigin/raring-disk0_vorigin/

:-)


On 7 April 2013 05:21, Martinx - ジェームズ <thiagocmartinsc at gmail.com> wrote:

> BTW, I used to add Ubuntu Cloud Archives (Folsom sub dir) to my regular
> hypervisors (only with KVM - no Nova, no OpenStack), to get new versions of
> libvirt and use it with virt-manager.
>
> But, now, with UCA for Grizzly, there a libvirt version 1.0.2 and, when I
> tried to create a LVM LV trough virt-manager (details -> storage -> lvm ->
> new volume), I'm getting this:
>
> ----
>   --- Logical volume ---
>   LV Name                /dev/vg01/raring-disk0
>   VG Name                vg01
>   LV UUID                XXXXXXXXXXXXXXXX
>   LV Write Access        read/write
>   *LV snapshot status     active destination for
> /dev/vg01/raring-disk0_vorigin ???*
>   LV Status              available
>   # open                 0
>   LV Size                X.XX GiB
>   Current LE             2500
>   COW-table size         4.00 MiB
>   COW-table LE           1
>   Allocated to snapshot  0.20%
>   Snapshot chunk size    4.00 KiB
>   Segments               1
>   Allocation             inherit
>   Read ahead sectors     auto
>   - currently set to     256
>   Block device           252:8
> ----
>
> Instead of this (previous libvirt):
>
> ----
>   --- Logical volume ---
>   LV Name                /dev/vg01/raring1-disk0
>   VG Name                vg01
>   LV UUID                XXXXXXXXXXXXXXXXX
>   LV Write Access        read/write
>   LV Status              available
>   # open                 0
>   LV Size                X.XX GiB
>   Current LE             1250
>   Segments               1
>   Allocation             inherit
>   Read ahead sectors     auto
>   - currently set to     256
>   Block device           252:7
> ----
>
>  The main problem is, after a system reboot and lots of failures, I'm
> getting this:
>
> ----
>   --- Logical volume ---
>   LV Name                /dev/vg01/raring-disk0
>   VG Name                vg01
>   LV UUID                XXXXXXXXXXXXXX
>   LV Write Access        read/write
>   *LV snapshot status     INACTIVE destination for
> /dev/vg01/bank2-disk0_vorigin ??????*
>   LV Status              NOT available
>   LV Size                5.86 GiB
>   Current LE             1500
>   COW-table size         4.00 MiB
>   COW-table LE           1
>   Snapshot chunk size    4.00 KiB
>   Segments               1
>   Allocation             inherit
>   Read ahead sectors     auto
> ----
>
>  LOGICAL VOLUME GONE!! VM CONTENTS LOST AFTER REBOOT!
>
>  Maybe this is a problem only when using new libvirt 1.0.2 with
> virt-manager 0.9.3 from Ubuntu LTS, and it does not affect Grizzly... Don't
> know yet...
>
>  Anyway, I'm just reporting it here to spread this info.
>
>  Someone here knows how to fix this? I mean, probably the new libvirt is
> creating the LV as a broken snapshots instead of regular LV? If so, maybe I
> should ask on libvirt-users instead...
>
>  I'm downgrading all my regular hypervisors to UCA Folsom (previous
> libvirt).
>
>  Sorry about the buzz (or a bit off-topic)...
>
> Best,
> Thiago
>
>
> On 7 April 2013 05:06, Sam Stoelinga <sammiestoel at gmail.com> wrote:
>
>> Checked this monning and there is no official 2013.1 out yet. Latest
>> version is a built of 2013.1RC1.
>>
>> See http://ubuntu-cloud.archive.canonical.com/ubuntu/pool/main/n/nova/
>>
>> Taken from packages file:
>>
>> Package: glance
>> Version: 1:2013.1~rc1-0ubuntu2~cloud0
>>
>>
>>
>> On Sun, Apr 7, 2013 at 12:34 PM, Martinx - ジェームズ <
>> thiagocmartinsc at gmail.com> wrote:
>>
>>> I just figured this out too... I think that Ubuntu Cloud Archive for
>>> Grizzly isn't ready for production yet...
>>>
>>>
>>> On 6 April 2013 23:28, Jason Ford <jason at chatinara.com> wrote:
>>>
>>>> Dave,
>>>>
>>>> Can you point to where the cloud archive has updated 2013.1 Grizzly
>>>> packages for 12.04? I don't see it when I look at the packages listed here:
>>>>
>>>> http://ubuntu-cloud.archive.canonical.com
>>>>
>>>> Is there somewhere else we should be pointing to get the 2013.1 release
>>>> instead of seeing the RC packages? If they are indeed not out yet, when
>>>> will they be?
>>>>
>>>> Thanks!
>>>>
>>>> jason
>>>>
>>>> ----- Original Message -----
>>>> From: "Daviey Walker" <dave.walker at canonical.com>
>>>> To: "Filipe Manco" <filipe.manco at gmail.com>
>>>> Cc: openstack at lists.launchpad.net
>>>> Sent: Saturday, April 6, 2013 4:16:42 PM
>>>> Subject: Re: [Openstack] Grizzly official packages
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On 6 April 2013 19:56, Filipe Manco < filipe.manco at gmail.com > wrote:
>>>>
>>>>
>>>>
>>>> Is there any way to use OpenStack Grizzly in Ubuntu 12.10?
>>>> Can we use the cloud archive repos?
>>>>
>>>>
>>>>
>>>> Filipe Manco
>>>>
>>>> http://about.me/fmanco
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Hi Filipe,
>>>>
>>>>
>>>> We have made Grizzly available in both the current Ubuntu development
>>>> series, which is 13.04 (Raring Ringtail), and also made it available to the
>>>> most recent LTS (Long Term Support) version which is 12.04 (Precise
>>>> Pangolin), via the Ubuntu Cloud Archive. At this current time, there are
>>>> not packages available for 12.10.
>>>>
>>>>
>>>> Our focus is currently on the current development version, and the most
>>>> recent LTS. May I ask what makes 12.10 interesting to you, for Grizzly?
>>>>
>>>>
>>>> Thanks.
>>>>
>>>> --
>>>> Kind Regards,
>>>>
>>>> Dave Walker < Dave.Walker at canonical.com >
>>>> Engineering Manager,
>>>> Ubuntu Server
>>>> _______________________________________________
>>>> Mailing list: https://launchpad.net/~openstack
>>>> Post to     : openstack at lists.launchpad.net
>>>> Unsubscribe : https://launchpad.net/~openstack
>>>> More help   : https://help.launchpad.net/ListHelp
>>>>
>>>> _______________________________________________
>>>> Mailing list: https://launchpad.net/~openstack
>>>> Post to     : openstack at lists.launchpad.net
>>>> Unsubscribe : https://launchpad.net/~openstack
>>>> More help   : https://help.launchpad.net/ListHelp
>>>>
>>>
>>>
>>> _______________________________________________
>>> Mailing list: https://launchpad.net/~openstack
>>> Post to     : openstack at lists.launchpad.net
>>> Unsubscribe : https://launchpad.net/~openstack
>>> More help   : https://help.launchpad.net/ListHelp
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20130407/690a8cfc/attachment.html>