[Openstack] [Folsom] First Guide to try Folsom Packages into Ubuntu 12.04

Emilien Macchi emilien.macchi at stackops.com
Sat Sep 8 07:44:34 UTC 2012


Hi Shake,

On Sat, Sep 8, 2012 at 6:08 AM, Shake Chen <shake.chen at gmail.com> wrote:

> Thanks for the greate document and script.
>
> I have read the document and have some question,
>
> queston 1
>
>
> If eth1 is connected to a Switch, it should be in tagged mode.
>
> my question is
> If the eth1 not connected to Switch,  it wolud work?
>

You need at least one physical network, let's say phynet1 which correspond
to a virtual bridge br-eth1.

You should connect at least one interface (eth1) on this bridge to be sure
that your virtual TAP will be able to communicate with the network.

Robert Kukura has written an excellent documentation [1] about how to
implement Open-vSwitch into Quantum.


> queston 2
>
> Enable IP forwarding :
>
> my question is
> In Essex, seem no need Enable IP forwarding ,
>
>  just because we use quantum, so we need setting Enable IP forwarding,
> right?
>
>
In Essex, you should enable IP forwarding where you run nova-network with
the goal that VMs can ping outside.

In Folsom, you will find a L3 agent [2].


[1] http://wiki.openstack.org/ConfigureOpenvswitch
[2] http://wiki.openstack.org/quantum-l3


Regards,
-- 
Emilien Macchi
*System Engineer*
*www.stackops.com

| *emilien.macchi at stackops.com**  *|* skype:emilien.macchi*
* <http://www.stackops.com>
*

*

******************** ADVERTENCIA LEGAL ********************
Le informamos, como destinatario de este mensaje, que el correo electrónico
y las comunicaciones por medio de Internet no permiten asegurar ni
garantizar la confidencialidad de los mensajes transmitidos, así como
tampoco su integridad o su correcta recepción, por lo que STACKOPS
TECHNOLOGIES S.L. no asume responsabilidad alguna por tales circunstancias.
Si no consintiese en la utilización del correo electrónico o de las
comunicaciones vía Internet le rogamos nos lo comunique y ponga en nuestro
conocimiento de manera inmediata. Este mensaje va dirigido, de manera
exclusiva, a su destinatario y contiene información confidencial y sujeta
al secreto profesional, cuya divulgación no está permitida por la ley. En
caso de haber recibido este mensaje por error, le rogamos que, de forma
inmediata, nos lo comunique mediante correo electrónico remitido a nuestra
atención y proceda a su eliminación, así como a la de cualquier documento
adjunto al mismo. Asimismo, le comunicamos que la distribución, copia o
utilización de este mensaje, o de cualquier documento adjunto al mismo,
cualquiera que fuera su finalidad, están prohibidas por la ley.

***************** PRIVILEGED AND CONFIDENTIAL ****************
We hereby inform you, as addressee of this message, that e-mail and
Internet do not guarantee the confidentiality, nor the completeness or
proper reception of the messages sent and, thus, STACKOPS TECHNOLOGIES S.L.
does not assume any liability for those circumstances. Should you not agree
to the use of e-mail or to communications via Internet, you are kindly
requested to notify us immediately. This message is intended exclusively
for the person to whom it is addressed and contains privileged and
confidential information protected from disclosure by law. If you are not
the addressee indicated in this message, you should immediately delete it
and any attachments and notify the sender by reply e-mail. In such case,
you are hereby notified that any dissemination, distribution, copying or
use of this message or any attachments, for any purpose, is strictly
prohibited by law.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20120908/77ef5e85/attachment.html>


More information about the Openstack mailing list