[Openstack] Enabling logging in keystone.

Ahmed Al-Mehdi ahmed at coraid.com
Wed Oct 3 00:10:10 UTC 2012


Hello,

I have gone through the document numerous times trying to configure keystone - mistyping keys, wrong key value, missing steps, etc (error prone). I was looking forward to using the script, as it would save a lot of typing/pain for a newcomer. However, if there are no plans to document the script (including adding a name / email to the Readme file to contact for issues in the script), test, and keep it updated (synced) with each new release of OpenStack (keystone), then I feel it is best to remove mention of it from the document.

While at it, the document also mentions a bash script to configure keystone, which I have not tried. If the bash script suffers from the same issue, maybe worth considering removing it from the document also.

The above are just my opinions.

Regards,
Ahmed.

________________________________
From: Dolph Mathews [dolph.mathews at gmail.com]
Sent: Tuesday, October 02, 2012 4:50 PM
To: openstack at lists.launchpad.net
Cc: heckj; Ahmed Al-Mehdi; Anne Gentle
Subject: Re: [Openstack] Enabling logging in keystone.

I find it odd that the document describes two approaches for configuring keystone -- one being a relatively undocumented, scripted approach not managed or distributed by OpenStack. Surely these two approaches will continue to evolve seperately and we'll experience more issues such as this one.

Anyone have any objections to removing this "scripted configuration" section in favor of focusing on the existing "manual" approach?

http://docs.openstack.org/trunk/openstack-compute/install/apt/content/setting-up-tenants-users-and-roles.html

-Dolph


On Tue, Oct 2, 2012 at 6:42 PM, Ahmed Al-Mehdi <ahmed at coraid.com<mailto:ahmed at coraid.com>> wrote:
Hi Dolph,

I am now getting the same output as the "curl" command, basically "Invalid Tenant". At this point

root at ubuntu1<mailto:root at ubuntu1>:~# keystone --os-username=adminUser --os-password=secretword --os-tenant-name=service --os-auth-url=http://10.0.
2.15:35357/v2.0 token-get

No handlers could be found for logger "keystoneclient.client"
Invalid tenant (HTTP 401)

Without the "os-tenant-name" parameter, I seem to get "good' response.

root at ubuntu1<mailto:root at ubuntu1>:~# keystone --os-username=adminUser --os-password=secretword --os-auth-url=http://10.0.2.15:35357/v2.0 token-get
No handlers could be found for logger "keystoneclient.v2_0.client"
+----------+----------------------------------+
| Property | Value |
+----------+----------------------------------+
| expires | 2012-10-03T23:31:17Z |
| id | 31078072aae94f5aab5c8e46ff5f6373 |
| user_id | 3e674f7f64ba452cb20781b8d5e26b7f |
+----------+----------------------------------+
At this point, I feel like I am running into issues with/in the python / PyYAML script (https://github.com/nimbis/keystone-init.git) which must not be populating info into keystone "accurately" and most probably not equivalent to manual steps mentioned in "Deploy and Install OpenStack - Red Hat Ubuntu". I will look into the script.

Regards,
Ahmed.

________________________________
From: Dolph Mathews [dolph.mathews at gmail.com<mailto:dolph.mathews at gmail.com>]
Sent: Tuesday, October 02, 2012 2:19 PM

To: Ahmed Al-Mehdi
Cc: heckj; openstack at lists.launchpad.net<mailto:openstack at lists.launchpad.net>
Subject: Re: [Openstack] Enabling logging in keystone.

No worries, that's what a second set of eyes is for!

By specifying a token and endpoint, you're bypassing the authentication process that your curl command is performing.

You can test authentication with the keystone client using:

$ keystone --os-username=adminUser --os-password=secretword --os-tenant-name=adminTenant --os-authurl=http://10.0.2.15:35357/v2.0<http://10.0.2.15:35357/v2.0/tokens> token-get

But as Anne pointed out, you don't have a tenant named "adminTenant". You'll also need to make sure you've granted a role to your user on the specified tenant for authorization to succeed. You can remove the tenant name argument from the token-get call to test authentication without authorization (therefore without requiring anything but a valid user in your keystone install).

-Dolph

On Tuesday, October 2, 2012, Ahmed Al-Mehdi wrote:
Hi Dolph,

Very sorry about that.  With the correct token, calling keystone from the cli is working.    However, the curl command is failing.  Will this cause an issue down the line as I start to install glance and nova?


#> keystone --token 012345SECRET99TOKEN012345 --endpoint http://10.0.2.15:35357/v2.0 tenant-list
+----------------------------------+---------------+---------+
|                id                |      name     | enabled |
+----------------------------------+---------------+---------+
| 07a44f9d55694d638f41bc160c14b42e | openstackDemo |   True  |
| 0e4cc20586ae42329db51e0c6f807731 |    service    |   True  |
+----------------------------------+---------------+---------+
#> curl -d '{"auth": {"tenantName": "adminTenant", "passwordCredentials": {"username": "adminUser", "password": "secretword"}}}' -H "Content-type: application/json" http://10.0.2.15:35357/v2.0/tokens | python -mjson.tool
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100   231    0   116  100   115   2771   2747 --:--:-- --:--:-- --:--:--  3052
{
    "error": {
        "code": 401,
        "message": "The request you have made requires authentication.",
        "title": "Not Authorized"
    }
}

Regards,
Ahmed.


________________________________
From: Dolph Mathews [dolph.mathews at gmail.com<https://exg5.exghost.com/owa/UrlBlockedError.aspx>]
Sent: Tuesday, October 02, 2012 12:12 PM
To: Ahmed Al-Mehdi
Cc: heckj; openstack at lists.launchpad.net<https://exg5.exghost.com/owa/UrlBlockedError.aspx>
Subject: Re: [Openstack] Enabling logging in keystone.

You're missing a "5" on the admin_token you've specified on the command line.

012345SECRET99TOKEN01234 (your CLI arg)
012345SECRET99TOKEN012345 (keystone.conf)

-Dolph


On Tue, Oct 2, 2012 at 1:08 PM, Ahmed Al-Mehdi <ahmed at coraid.com> wrote:
Hi Joe,

I have put the conf file (renamed to ahmed_keystone.conf)  into gist.

git://gist.github.com/3821846.git<http://gist.github.com/3821846.git>

Please let me know if you have any issues accessing the file.

Thank you very much for helping me out.  I have a feeling the issue might be in the python script to populate keystone. When I previously input the data manually, I got keystone configured properly.

Regards,
Ahmed.


________________________________________
From: heckj [heckj at mac.com]
Sent: Tuesday, October 02, 2012 10:56 AM
To: Ahmed Al-Mehdi
Cc: openstack at lists.launchpad.net
Subject: Re: [Openstack] Enabling logging in keystone.

Ahmed - can you put your keystone.conf into a paste or gist and share it with me? I'd be happy to help you debug this.

I'm assuming you're running keystone on the system with the IP address 10.0.2.15, correct?

-joe

On Oct 2, 2012, at 10:45 AM, Ahmed Al-Mehdi <ahmed at coraid.com> wrote:

> Hi Joe,
>
> I noticed I did not put the port number in the URL, now I am getting a more meaningful error:
>
> #> keystone --token 012345SECRET99TOKEN01234 --endpoint http://10.0.2.15:35357/v2.0  tenant-list
> No handlers could be found for logger "keystoneclient.client"
> Unable to authorize user
>
> Regards,
> Ahmed.
>
> ________________________________________
> From: openstack-bounces+ahmed=coraid.com at lists.launchpad.net [openstack-bounces+ahmed=coraid.com at lists.launchpad.net] On Behalf Of Ahmed Al-Mehdi [ahmed at coraid.com]
> Sent: Tuesday, October 02, 2012 10:30 AM
> To: heckj
> Cc: openstack at lists.launchpad.net
> Subject: Re: [Openstack] Enabling logging in keystone.
>
> Hi Joe,
>
> Unfortunately before I read your response I re-installed my Ubuntu server.  I repeated the same steps mentioned in the OpenStack document "Deploy and Install OpenStack - RedHat Ubuntu" and also used the script mentioned in it  (https://github.com/nimbis/keystone-init/blob/master/keystone-init.py) to populate keystone.  I reboot the server prior to running your suggested command and now running into a different issue, which I feel maybe due to not starting some service.  Btw, my host OS is Ubuntu 12.04 (32 bit) running inVirtualBox.
>
> Currently I am getting the following error:
>
> #> keystone --token 012345SECRET99TOKEN01234 --endpoint http://10.0.2.15/v2.0 tenant-lis


--

-Dolph

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20121002/5b769e74/attachment.html>


More information about the Openstack mailing list