[Openstack] OpenStack Folsom Install Guide

Skible OpenStack skible.openstack at gmail.com
Tue Nov 6 18:02:17 UTC 2012


Hi Yi Sun,

We are facing the same problem. I guess my networking architecture was 
not as correct as i thought.
Although, i have just received a contribution from a friend that filled 
up the missing pieces and got it to work properly ! If you can bare with 
me, i will test it out tomorrow and publish it on the guide.

Best regards.
Le 06/11/2012 04:55, Yi Sun a écrit :
> Skible,
> Followed your guide, everything went through fine until I started my
> VM. The VM image I used is a ubuntu cloud image
> (http://cloud-images.ubuntu.com/precise/current/precise-server-cloudimg-amd64-disk1.img).
> After boot up, the VM can not access meta server. It complains about
> "not route found".
> I run a tcpdump on the VM tap interface, I'm seeing ARP requests to
> the router for the VM network (10.5.5.1) from the VM but no arp reply.
> quantum router-list and port-list give something below:
> root at controller/# quantum router-list
>
> | cc5e1de4-e59e-441d-92ea-da2f803f2903 | demo_net_router | null
>            |
>
> root at controller/# quantum port-list
> | 1af24487-4a48-45a7-939f-486e5d7996b3 |      | fa:16:3e:fd:da:ab |
> {"subnet_id": "cf894ab0-32e7-44e1-9467-cdeeb01597f9", "ip_address":
> "10.5.5.2"}  |
> | 61c2bef9-1bd9-4c2d-ad73-28740b4d0759 |      | fa:16:3e:cf:f4:09 |
> {"subnet_id": "cf894ab0-32e7-44e1-9467-cdeeb01597f9", "ip_address":
> "10.5.5.3"}  |
> | 63bea17f-af30-4d75-9aa5-052a426768d6 |      | fa:16:3e:f0:7a:16 |
> {"subnet_id": "cf894ab0-32e7-44e1-9467-cdeeb01597f9", "ip_address":
> "10.5.5.1"}  |
>
> But ifconfig on controller does not show interface for router at all
>
> Have you seen the same issue before?
> Thanks
> Yi
>
> On Fri, Nov 2, 2012 at 2:36 AM, Skible OpenStack
> <skible.openstack at gmail.com> wrote:
>> Hi Ian,
>>
>> Many thanks for the remark. i fixed it :)
>>
>> Le 02/11/2012 10:22, DarkSinclair a écrit :
>>
>>> Greetings Skible.
>>>
>>> Great work to you and the rest on the guide.  A minor change is required
>>> in nova.conf configuration for file VNC.  The parameter for
>>> vncserver_proxyclient_address must be eth0's IP address, otherwise the
>>> console reports 'failed to connect to server'.
>>>
>>> vncserver_proxyclient_address=172.16.2.250
>>> #vncserver_proxyclient_address=127.0.0.1
>>>
>>> Regards,
>>>
>>> Ian Sinclair
>>>
>>> On 2012-11-01, at 7:18 AM, Skible OpenStack <skible.openstack at gmail.com>
>>> wrote:
>>>
>>> hi Tomokazu,
>>>
>>> oups ! i forget to add that in the guide ! thanks ! i will fix it right
>>> away !
>>>
>>> As for the noVNC problem ! i think because you haven't installed noVNC on
>>> the compute node !
>>>
>>>
>>> Le 01/11/2012 11:31, Tomokazu Hirai a écrit :
>>>> Hi Skible,
>>>>
>>>> I installed openstack folsom with your guide and I noticed that
>>>> compute node's quantum can not access to controller node's
>>>> rabbitmq-server.
>>>>
>>>> so I added computeNode:/etc/quantum/quantum.conf with :
>>>>
>>>>       rabbit_host = <compute node's IP addr>
>>>>
>>>> now I can access to both node's VMs and VM can access to the
>>>> Internet. :D
>>>>
>>>> But I still have a problem.
>>>>
>>>> I can not access to VM's noVNC on compute node. I can
>>>> access to the VM's noVNC on controller node.
>>>>
>>>> Best regards,
>>>>
>>>> -- Tomokazu Hirai @jedipunkz
>>>>
>>>> From: Skible OpenStack <skible.openstack at gmail.com>
>>>> Subject: [Openstack] OpenStack Folsom Install Guide
>>>> Date: Wed, 31 Oct 2012 13:46:31 +0100
>>>>
>>>>> Hi Stackers,
>>>>>
>>>>> i am currently seeing a lot of people having trouble deploying
>>>>> OpenStack Folsom si i humbly present this guide for those who are
>>>>> experimented and even those who are still taking their first steps
>>>>> into the cloud world.
>>>>>
>>>>> The guide has been updated from the last version to support:
>>>>>
>>>>> * Multi Node install
>>>>> * ubuntu server 12.10
>>>>> * Quatum Configuration
>>>>> * No Quantum is you are not interrested
>>>>>
>>>>> Test it to see for yourself how simple and fun has OpenStack
>>>>> deployment has became !
>>>>>
>>>>> OpenStack Folsom Install Guide
>>>>>
>>>>> <https://github.com/mseknibilel/OpenStack-Folsom-Install-guide/blob/master/OpenStack_Folsom_Install_Guide_WebVersion.rst>
>>>>>
>>>>> Cheers
>>>> _______________________________________________
>>>> Mailing list: https://launchpad.net/~openstack
>>>> Post to     : openstack at lists.launchpad.net
>>>> Unsubscribe : https://launchpad.net/~openstack
>>>> More help   : https://help.launchpad.net/ListHelp
>>>
>>> _______________________________________________
>>> Mailing list: https://launchpad.net/~openstack
>>> Post to     : openstack at lists.launchpad.net
>>> Unsubscribe : https://launchpad.net/~openstack
>>> More help   : https://help.launchpad.net/ListHelp
>>>
>>
>> _______________________________________________
>> Mailing list: https://launchpad.net/~openstack
>> Post to     : openstack at lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~openstack
>> More help   : https://help.launchpad.net/ListHelp
>
>





More information about the Openstack mailing list