[Openstack] Using VMWare ESXi with openstack

John Garbutt John.Garbutt at citrix.com
Wed Apr 25 14:53:58 UTC 2012


The VMWare and XenServer OpenStack support have very similar architectures. Every hypervisor has a VM that runs the nova-compute code. You don’t as such install it into the hypervisor. In the case of XenServer, there are certainly some plugins that are installed, but nova, at the moment, still runs in a VM on top of the hypervisor.

I don’t think OpenStack requires vCenter at all.

The email linked below looks like what is in the manual (and was previously on the wiki). I guess the format of the nova conf should be updated, but it looks mostly accurate from what I remember.

I hope that helps a little.

Thanks,
John

From: openstack-bounces+john.garbutt=eu.citrix.com at lists.launchpad.net [mailto:openstack-bounces+john.garbutt=eu.citrix.com at lists.launchpad.net] On Behalf Of Jorge de la Cruz
Sent: 25 April 2012 14:33
To: Atul Gosain
Cc: openstack at lists.launchpad.net
Subject: Re: [Openstack] Using VMWare ESXi with openstack

Hi,
I worked with Cloudstack too, Cloudstack use the vCenter for launch the VM's, destroy, etc. That is a good idea but you depend, always, for the good funcionality of vCenter.

The Information for Openstack is so short:
http://docs.openstack.org/trunk/openstack-compute/admin/content/VMWare_configuration_options.html

But i readed a good message before, this:
https://lists.launchpad.net/openstack/msg09607.html


Cheers
--

Jorge de la Cruz
Cloud Architect
www.stackops.com<http://www.stackops.com/> |  jorge.delacruz at stackops.com<login.jsp?at=a467f3be-21c0-4b31-9a1c-beee62395a4e&mailto=jorge.delacruz at stackops.com> | +34 91 309 48 77 | skype:jorge.delacruz.stackops
<http://www.stackops.com/>

[cid:~WRD000.jpg]

******************** ADVERTENCIA LEGAL ********************
Le informamos, como destinatario de este mensaje, que el correo electrónico y las comunicaciones por medio de Internet no permiten asegurar ni garantizar la confidencialidad de los mensajes transmitidos, así como tampoco su integridad o su correcta recepción, por lo que STACKOPS TECHNOLOGIES S.L. no asume responsabilidad alguna por tales circunstancias. Si no consintiese en la utilización del correo electrónico o de las comunicaciones vía Internet le rogamos nos lo comunique y ponga en nuestro conocimiento de manera inmediata. Este mensaje va dirigido, de manera exclusiva, a su destinatario y contiene información confidencial y sujeta al secreto profesional, cuya divulgación no está permitida por la ley. En caso de haber recibido este mensaje por error, le rogamos que, de forma inmediata, nos lo comunique mediante correo electrónico remitido a nuestra atención y proceda a su eliminación, así como a la de cualquier documento adjunto al mismo. Asimismo, le comunicamos que la distribución, copia o utilización de este mensaje, o de cualquier documento adjunto al mismo, cualquiera que fuera su finalidad, están prohibidas por la ley.

***************** PRIVILEGED AND CONFIDENTIAL ****************
We hereby inform you, as addressee of this message, that e-mail and Internet do not guarantee the confidentiality, nor the completeness or proper reception of the messages sent and, thus, STACKOPS TECHNOLOGIES S.L. does not assume any liability for those circumstances. Should you not agree to the use of e-mail or to communications via Internet, you are kindly requested to notify us immediately. This message is intended exclusively for the person to whom it is addressed and contains privileged and confidential information protected from disclosure by law. If you are not the addressee indicated in this message, you should immediately delete it and any attachments and notify the sender by reply e-mail. In such case, you are hereby notified that any dissemination, distribution, copying or use of this message or any attachments, for any purpose, is strictly prohibited by law.

________________________________
De: "Atul Gosain" <atul.gosain at gmail.com>
Para: openstack at lists.launchpad.net
Enviados: Miércoles, 25 de Abril 2012 15:18:35
Asunto: [Openstack] Using VMWare ESXi with openstack

Hi

 I tried to see how we can control any existing infrastructure of VMWare/XenServer etc from openstack.
What i understood is that nova compute needs to be installed on the hypervisors(compute hosts) which can be Ubuntu Servers for KVM etc.
Also for XenServer, we can build a package on Ubuntu and then will have to install on XenServer so that it can be controlled by cloud controller.

Basically openstack compute should be installed on hypervisor and accepts the instructions from controller to create VM's, assign IP addresses, destroy, attaching volumes etc.
Please confirm this understanding.

Based on this, i did not find anything on VMWare ESXi. How does the compute gets installed on ESXi server ?

Also, i have seen cloudstack working which seems to be little different than how openstack works. Cloudstack can control existing VMWare/XenServer/KVM etc using their respective API's.
It doesnt require any installation on the hypervisor itself. If my understanding is correct, then this seems to be a better model.
What is the reason that openstack cannot operate the hypervisors without installing compute on them ?

Thanks
Atul

_______________________________________________
Mailing list: https://launchpad.net/~openstack
Post to     : openstack at lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20120425/d78098b5/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ~WRD000.jpg
Type: image/x-citrix-jpeg
Size: 823 bytes
Desc: ~WRD000.jpg
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20120425/d78098b5/attachment.bin>


More information about the Openstack mailing list