[Openstack-operators] OSA Newton Release Deployment in test environment

Amit Kumar ebiibe82 at gmail.com
Mon Feb 6 07:39:29 UTC 2017


Thanks Salman. But in my case MTU sizes are same.

Anybody having any other opinion on this?

Regards,
Amit

On Sun, Feb 5, 2017 at 2:13 AM, Salman Toor <salman.toor at it.uu.se> wrote:

>
> <https://mail.uu.se/owa/?ae=PreFormAction&a=ReplyAll&t=IPM.Note&id=RgAAAAAYgm11jTMZSqDNQIKZhLPSBwCZtICTEb9DQLldDzcg6sC7AAAADML5AACZtICTEb9DQLldDzcg6sC7AABJX%2fCxAAAJ&pspid=_1486240160008_300721368#>
> Hi,
>
> I am not an expert but I had similar problem and that was because of
> different MTU at host interface and container's interface.
>
> My suggestion will be to check the MTU, if that helps.
>
> Regards..
> Salman.
>
>
> PhD, Scientific Computing
> Researcher, IT Department,
> Uppsala University.
> Senior Cloud Architect,
> SNIC.
> Cloud Application Expert,
> UPPMAX.
> salman.toor at it.uu.se
> <https://mail.uu.se/owa/redir.aspx?REF=m0Eyh6bAe3V0K5jcrZeIkUVJw4_716jYUS9Yd1fJMFOsyyE71yXTCAFtYWlsdG86c2FsbWFuLnRvb3JAaXQudXUuc2U.>
> http://www.it.uu.se/katalog/salto690
> ------------------------------
> *From:* Amit Kumar [ebiibe82 at gmail.com]
> *Sent:* Saturday, February 04, 2017 7:22 PM
> *To:* openstack-operators at lists.openstack.org
> *Subject:* [Openstack-operators] OSA Newton Release Deployment in test
> environment
>
> Hi All,
>
> I am trying to prepare test environment as mentioned in the following
> link. I am using two VMs created in Virtualbox. One will be Infra Node and
> other will be Compute Node. "Block Storage Host" is not present in my
> deployment.
> http://docs.openstack.org/project-deploy-guide/
> openstack-ansible/newton/app-config-test.html#test-environment-config
>
> While following instructions in Newton deployment guide (
> http://docs.openstack.org/project-deploy-guide/openstack-ansible/newton/),
> at "Run Playbooks" step, "openstack-ansible setup-hosts.yml" is successful
> but "openstack-ansible setup-infrastructure.yml" is failing.
>
> It is failing for " infra1_repo_container-" and is failing at "TASK
> [pip_install : Install apt packages] ******************************
> ********"
> Here is the failure text:
> failed: [infra1_repo_container-f9649c00] (item=[u'build-essential',
> u'python-setuptools', u'libffi-dev', u'libssl-dev', u'python-dev',
> u'python-openssl', u'python-pyasn1']) => {"cache_update_time": 0,
> "cache_updated": false, "failed": true, "invocation": {"module_args":
> {"allow_unauthenticated": false, "autoremove": false, "cache_valid_time":
> null, "deb": null, "default_release": null, "dpkg_options":
> "force-confdef,force-confold", "force": false, "install_recommends": null,
> "name": ["build-essential", "python-setuptools", "libffi-dev",
> "libssl-dev", "python-dev", "python-openssl", "python-pyasn1"],
> "only_upgrade": false, "package": ["build-essential", "python-setuptools",
> "libffi-dev", "libssl-dev", "python-dev", "python-openssl",
> "python-pyasn1"], "purge": false, "state": "latest", "update_cache": false,
> "upgrade": null}, "module_name": "apt"}, "item": ["build-essential",
> "python-setuptools", "libffi-dev", "libssl-dev", "python-dev",
> "python-openssl", "python-pyasn1"], "msg": "'/usr/bin/apt-get -y -o
> \"Dpkg::Options::=--force-confdef\" -o \"Dpkg::Options::=--force-confold\"
> install 'python-setuptools' 'python-openssl' 'python-pyasn1'' failed: E:
> There are problems and -y was used without --force-yes\n", "stderr": "E:
> There are problems and -y was used without --force-yes\n", "stdout":
> "Reading package lists...\nBuilding dependency tree...\nReading state
> information...\nThe following extra packages will be installed:\n
> python-pkg-resources\nSuggested packages:\n python-openssl-doc
> python-openssl-dbg python-distribute\n python-distribute-doc doc-base\nThe
> following NEW packages will be installed:\n python-openssl
> python-pkg-resources python-pyasn1 python-setuptools\n0 upgraded, 4 newly
> installed, 0 to remove and 4 not upgraded.\nNeed to get 418 kB of
> archives.\nAfter this operation, 1801 kB of additional disk space will be
> used.\nWARNING: The following packages cannot be authenticated!\n
> python-pkg-resources python-setuptools\n", "stdout_lines": ["Reading
> package lists...", "Building dependency tree...", "Reading state
> information...", "The following extra packages will be installed:", "
> python-pkg-resources", "Suggested packages:", " python-openssl-doc
> python-openssl-dbg python-distribute", " python-distribute-doc doc-base",
> "The following NEW packages will be installed:", " python-openssl
> python-pkg-resources python-pyasn1 python-setuptools", "0 upgraded, 4 newly
> installed, 0 to remove and 4 not upgraded.", "Need to get 418 kB of
> archives.", "After this operation, 1801 kB of additional disk space will be
> used.", "WARNING: The following packages cannot be authenticated!", "
> python-pkg-resources python-setuptools"]}
>
> On looking around, it seems that it is happening because LXC are lacking
> connectivity to internet. So, as per the link: http://docs.openstack.org/
> developer/openstack-ansible/developer-docs/installation-
> hosts-limited-connectivity.html
> I tried the step mentioned at this page under heading "Install pip
> through deployment host" but it is giving following error.
>
> "fatal: [infra1]: FAILED! => {"changed": true, "cmd": "python
> /opt/get-pip.py --isolated --no-index --find-links=/tmp/pip_install
>  pip==8.1.2 setuptools==28.6.0 wheel==0.29.0", "delta": "0:00:00.740516",
> "end": "2017-02-04 22:58:12.985852", "failed": true, "invocation":
> {"module_args": {"_raw_params": "python /opt/get-pip.py --isolated
> --no-index --find-links=/tmp/pip_install  pip==8.1.2 setuptools==28.6.0
> wheel==0.29.0", "_uses_shell": true, "chdir": null, "creates": null,
> "executable": null, "removes": null, "warn": true}, "module_name":
> "command"}, "rc": 1, "start": "2017-02-04 22:58:12.245336", "stderr": "Url
> '/tmp/pip_install' is ignored. It is either a non-existing path or lacks a
> specific scheme.\n  Url '/tmp/pip_install' is ignored. It is either a
> non-existing path or lacks a specific scheme.\n  Could not find a version
> that satisfies the requirement setuptools==28.6.0 (from versions: )\nNo
> matching distribution found for setuptools==28.6.0", "stdout": "Requirement
> already up-to-date: pip==8.1.2 in /usr/local/lib/python2.7/dist-packages\nCollecting
> setuptools==28.6.0", "stdout_lines": ["Requirement already up-to-date:
> pip==8.1.2 in /usr/local/lib/python2.7/dist-packages", "Collecting
> setuptools==28.6.0"], "warnings": []}"
>
> Please guide if you are aware of any solution to this problem.
>
> Thanks.
>
> Regards,
> Amit
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-operators/attachments/20170206/8acc7b5d/attachment.html>


More information about the OpenStack-operators mailing list