Open Stack

Hi all,

It was a problem with the host machine, now seems to work fine.

Thanks.

2016-05-21 0:31 GMT+02:00 Kevin Benton <kevin at benton.pub>:

> Why is the virtual router not matching the gateway IP of the subnet?
>
> On Fri, May 20, 2016 at 11:33 AM, Fran Barrera <franbarrera6 at gmail.com>
> wrote:
>
>> Hi all,
>>
>> I'm installin openstack Liberty AIO following the official
>> doc. Everything seems to work fine, but I have this problem:
>>
>> Neutron with LinuxBridge
>>
>> Virtual-Router - 192.168.1.231
>> Instance - 192.168.1.232
>> Host-Machine - 192.168.1.100
>> Gateway - 192.168.1.1
>>
>> I created an instance, from there I can only ping the virtual-router and
>> host machine, but nothing more.
>>
>> root at trusty:~# ip netns exec
>> qrouter-4a8fa6f3-0d6f-4a6b-9108-2070889e8450 ip a
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
>> default
>>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>     inet 127.0.0.1/8 scope host lo
>>        valid_lft forever preferred_lft forever
>>     inet6 ::1/128 scope host
>>        valid_lft forever preferred_lft forever
>> 2: qr-23d84177-1b at if13: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>> pfifo_fast state UP group default qlen 1000
>>     link/ether fa:16:3e:30:40:4f brd ff:ff:ff:ff:ff:ff
>>     inet 10.0.0.1/24 brd 10.0.0.255 scope global qr-23d84177-1b
>>        valid_lft forever preferred_lft forever
>>     inet6 fe80::f816:3eff:fe30:404f/64 scope link
>>        valid_lft forever preferred_lft forever
>> 3: qg-266fc339-b8 at if14: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>> pfifo_fast state UP group default qlen 1000
>>     link/ether fa:16:3e:82:9d:bf brd ff:ff:ff:ff:ff:ff
>>     inet 192.168.1.231/24 brd 192.168.1.255 scope global qg-266fc339-b8
>>        valid_lft forever preferred_lft forever
>>     inet 192.168.1.232/32 brd 192.168.1.232 scope global qg-266fc339-b8
>>        valid_lft forever preferred_lft forever
>>     inet6 fe80::f816:3eff:fe82:9dbf/64 scope link
>>        valid_lft forever preferred_lft forever
>>
>> root at trusty:~# ssh cirros at 192.168.1.232
>> cirros at 192.168.1.232's password:
>> $ ip a
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
>>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>     inet 127.0.0.1/8 scope host lo
>>     inet6 ::1/128 scope host
>>        valid_lft forever preferred_lft forever
>> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc pfifo_fast qlen
>> 1000
>>     link/ether fa:16:3e:2b:62:da brd ff:ff:ff:ff:ff:ff
>>     inet 10.0.0.3/24 brd 10.0.0.255 scope global eth0
>>     inet6 fe80::f816:3eff:fe2b:62da/64 scope link
>>        valid_lft forever preferred_lft forever
>> $ ping 192.168.1.231
>> PING 192.168.1.231 (192.168.1.231): 56 data bytes
>> 64 bytes from 192.168.1.231: seq=0 ttl=64 time=0.569 ms
>>
>> $ ping 192.168.1.100
>> PING 192.168.1.100 (192.168.1.100): 56 data bytes
>> 64 bytes from 192.168.1.100: seq=0 ttl=63 time=0.685 ms
>> ^C
>> --- 192.168.1.100 ping statistics ---
>> 1 packets transmitted, 1 packets received, 0% packet loss
>> round-trip min/avg/max = 0.685/0.685/0.685 ms
>>
>> $ ping 192.168.1.1
>> PING 192.168.1.1 (192.168.1.1): 56 data bytes
>> ^C
>> --- 192.168.1.1 ping statistics ---
>> 5 packets transmitted, 0 packets received, 100% packet loss
>>
>> Any suggestions?
>>
>> Regards,
>> Fran.
>>
>> _______________________________________________
>> OpenStack-operators mailing list
>> OpenStack-operators at lists.openstack.org
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-operators
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-operators/attachments/20160521/3c31bac5/attachment.html>