Open Stack

Hi,

I have done all the configuration in ml2 plugin here is my  ml2_conf.ini
config file


http://paste.ubuntu.com/14567407/

On Sat, Jan 16, 2016 at 8:29 PM, Joseph Bajin <josephbajin at gmail.com> wrote:

> Your entire configuration for VLAN, VXLAN, etc should be done within the
> ml2 configuration and not really through ovs.  All OVS needs to know about
> are the bridges that you setup and what they are called and going to be
> used for.  Any specific configurations will happen on the system side and
> not the ovs side of things.
>
> On Fri, Jan 15, 2016 at 4:52 PM, raju <raju.roks at gmail.com> wrote:
>
>> Hi,
>>
>> I have done 3 node deployment of openstack liberty on cent os 7 and
>> configured neutron with ml2 and ovs. when am trying to spin up instances
>> getting neutron error unable to bind port to  host am pasting logs files
>> and ml2 conf file below
>>
>> These are the steps followed to create ovs bridges
>>
>> I have 2 physical interface eth0 is management and eth1 is trunk for all
>> public/vlan/vxlan traffic
>>  ovs-vsctl add-br br-uplink
>> ovs-vsctl add-br br-vlan
>>  ovs-vsctl add-br br-int
>>  ovs-vsctl add-port br-uplink eth1 -- set port eth1 vlan_mode=trunk
>> trunk=100,101,200,201,4000
>>  ovs-vsctl add-port br-vlan patch-to-uplink -- set Interface
>> patch-to-uplink type=patch options:peer=patch-to-vlan
>>  ovs-vsctl add-port br-uplink patch-to-vlan -- set Interface
>> patch-to-vlan type=patch options:peer=patch-to-uplink
>>  #
>> vs-vsctl add-port br-uplink l3vxlan tag=4000 -- set Interface l3vxlan
>> type=internal
>>  ip addr add 10.255.255.XXX/24 dev l3vxlan
>> ip link set dev l3vxlan up
>>  ip link set dev l3vxlan mtu 1600
>>
>> Neutron log: http://paste.ubuntu.com/14508309/
>>
>> OVS log network node:  http://paste.ubuntu.com/14508422/
>>
>> ovs-vsctl show output: http://paste.ubuntu.com/14508685/
>>
>>
>> Thanks
>>
>>
>>
>> _______________________________________________
>> OpenStack-operators mailing list
>> OpenStack-operators at lists.openstack.org
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-operators
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-operators/attachments/20160118/6b984e56/attachment.html>