Open Stack

Hi Mark, I forgot another question for you: do you know when nsx with mh
support will be released ?
Regards
Ignazio

Il 18/Feb/2016 08:28 AM, "Ignazio Cassano" <ignaziocassano at gmail.com> ha
scritto:
>
> Many thanks, Mark.
> We are going to test this solution following your instructions and if we
find problems some problems we will contact you.
> Regards
> Ignazio
>
> 2016-02-17 20:45 GMT+01:00 Mark Voelker <mvoelker at vmware.com>:
>>
>> Hi Ignazio,
>>
>> Sure, NSXv 6.2.1 is usable for a VMware region [1].  Source for the
driver is here [2]:
>>
>> http://git.openstack.org/cgit/openstack/vmware-nsx/tree/?h=stable/liberty
>>
>> The blogs I pointed to earlier should give you a good feel for the basic
architecture and services.  Configuration-wise, you’ll want to set
“core_plugin" to “vmware_nsx.neutron.plugins.vmware.plugin.NsxVPlugin” and
“service_plugins” should include
“neutron_lbaas.services.loadbalancer.plugin.LoadBalancerPlugin,vmware_nsx.neutron.services.l2gateway.plugin.NSxL2GatewayPlugin”.
in your neutron.conf file and then configure the plugin options.  Most of
what you’ll need is found here:
>>
>>
http://git.openstack.org/cgit/openstack/vmware-nsx/tree/etc/nsx.ini?h=stable/liberty
>>
>> You’ll want to set “nsx_l2gw_driver" to
"vmware_nsx.neutron.services.l2gateway/nsx_v_driver.NsxvL2GatewayDriver" in
line 49 since you’re using NSXv.  Then fill in the NSXv plugin
configuration options in the [nsxv] section in lines 61-181, and you may
optionally want to tinker with the [nsx_sync] section in lines 239-276. You
can ignore most of the rest as it mostly pertains to the NSX-mh and DVS
plugins.  If it’s useful I can send you some sample configs from one of my
lab setups; just let me know!
>>
>> [1] For a bit more info on the various plugins available for NSX-mh,
NSXv, and DVS see https://wiki.openstack.org/wiki/Neutron/VMware_NSX_plugins
>>
>> [2] More specifically for you since you’re using NSXv, the NSXv plugin
code is in:
http://git.openstack.org/cgit/openstack/vmware-nsx/tree/vmware_nsx/plugins/nsx_v?h=stable/liberty
>>
>> At Your Service,
>>
>> Mark T. Voelker
>>
>>
>>
>> > On Feb 17, 2016, at 10:30 AM, Ignazio Cassano <ignaziocassano at gmail.com>
wrote:
>> >
>> > Hi Mark, many thanks for your help.
>> > We are not using vmware VIO, but we are using openstack liberty
community edition with a Region for vmware nsx.
>> > If you read the following link:
>> >
>> >
http://docs.openstack.org/admin-guide-cloud/networking_config-agents.html
>> >
>> > you can see the following instructions:
>> >       • Use the NSX Administrator Guide to add the node as a
Hypervisor by using the NSX Manager GUI. Even if your forwarding node has
no VMs and is only used for services agents like neutron-dhcp-agent or
neutron-lbaas-agent, it should still be added to NSX as a Hypervisor.
>> > On  nsx 6.2.1 GUI there isn't any section to add the node as a
Hypervisor, probably because this document is related to a NSX multi
hypervisor version.
>> >
>> > So the question is: must we wait for a new nsx multi hypervisor
version or we can use the current nsx version ?
>> >
>> > Best Regards
>> >
>> > Ignazio
>> >
>> >
>> >
>> >
>> > 2016-02-17 14:51 GMT+01:00 Mark Voelker <mvoelker at vmware.com>:
>> > Hi Ignazio,
>> >
>> > I have. =)  Drop me a note and let me know what you need; we’ll be
happy to help.  For a general background, this is a good place to start:
>> >
>> >
http://blogs.vmware.com/openstack/openstack-networking-with-vmware-nsx-part-1/
>> >
>> >
http://blogs.vmware.com/openstack/openstack-networking-with-vmware-nsx-part-2/
>> >
>> >
http://blogs.vmware.com/openstack/openstack-networking-with-vmware-nsx-part-3/
>> >
>> > There’s also useful information in the config guides:
>> >
>> >
http://docs.openstack.org/kilo/config-reference/content/networking-plugin-nsx.html
>> >
>> > At Your Service,
>> >
>> > Mark T. Voelker
>> >
>> >
>> >
>> > > On Feb 17, 2016, at 2:43 AM, Ignazio Cassano <
ignaziocassano at gmail.com> wrote:
>> > >
>> > > Hi all,
>> > > I would like to know if someone have configured openstack neutron
with vmware
>> > > nsx 6. I found old documentation about it.
>> > > Regards
>> > > Ignazio
>> > > _______________________________________________
>> > > OpenStack-operators mailing list
>> > > OpenStack-operators at lists.openstack.org
>> > >
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-operators
>> >
>> >
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-operators/attachments/20160218/1ed6524a/attachment.html>