Open Stack

Do you want registry as well or just API?

On Wed, 3 Feb 2016 at 13:02 Abel Lopez <alopgeek at gmail.com> wrote:

> Can you paste your glance config?
>
> On Tuesday, February 2, 2016, Liam Haworth <liam.haworth at bluereef.com.au>
> wrote:
>
>> After searching my configs nothing is out of place and I have even tried
>> setting the permissions on the images folder to 777 to see if that helps
>> but nothing has helped and glance api keeps throwing this:
>> http://paste.openstack.org/show/485794/
>>
>> On Wed, 3 Feb 2016 at 11:51 Liam Haworth <liam.haworth at bluereef.com.au>
>> wrote:
>>
>>> Sooooo, just tired uploading the image via CLI with this command:
>>>
>>> glance --os-image-api-version 1 image-create --progress --file
>>> ./polygraph-dns-services.qcow2 --min-disk 5 --container-format bare
>>> --disk-format qcow2 --name polygraph-dns-services
>>>
>>> Got this error:
>>>
>>> 410 Gone: Error in store configuration. Adding images to store is
>>> disabled. (HTTP N/A)
>>>
>>> So I mustn't have something configured properly so I shall go digging in
>>> my config. What *is* annoying though is that the dashboard said the
>>> upload went fine where as the CLI tool tells you the hard truth, errrrg.
>>>
>>> Thanks for all the help guys! I shall respond with a reply to this
>>> thread once I have found the afflicting configuration options.
>>>
>>> On Wed, 3 Feb 2016 at 10:40 Liam Haworth <liam.haworth at bluereef.com.au>
>>> wrote:
>>>
>>>> In response to Kris,
>>>>
>>>> On ctrl1: glance:x:112:120::/var/lib/glance:/bin/false
>>>> On ctrl2: glance:x:112:119::/var/lib/glance:/bin/false
>>>>
>>>> 120 on ctrl2 is nova, so on ctrl1 the perms would be glance:glance and
>>>> on ctrl2 it would glance:nova. I would suspect this as the issue if the
>>>> issue has happening on ctrl2 but it is happening on ctrl1
>>>>
>>>> On Wed, 3 Feb 2016 at 10:34 Kris G. Lindgren <klindgren at godaddy.com>
>>>> wrote:
>>>>
>>>>> Not related to your issue, but something to keep an eye out for, is
>>>>> that you need to keep the uid for glance synced across your glances servers
>>>>> when using an nfsv3 store.  Since nfsv3 stores the uid & gid for the file
>>>>> perms.  You can run into weird issues if glance is uid/gid 501 on one
>>>>> glance server and 502 on another.  We had that problem crop up in
>>>>> production when packages were doing "useradd" without specifying a
>>>>> uid/gid.  So you could end up with systems with different id's and
>>>>> permissions that are all screwed up between multiple servers.
>>>>>
>>>>> So related to your question .. If I remember correctly you need
>>>>> read/execute permissions to list the contents/enter a directory under linux.
>>>>>
>>>>> ___________________________________________________________________
>>>>> Kris Lindgren
>>>>> Senior Linux Systems Engineer
>>>>> GoDaddy
>>>>>
>>>>> From: Liam Haworth <liam.haworth at bluereef.com.au>
>>>>> Date: Tuesday, February 2, 2016 at 4:25 PM
>>>>> To: Abel Lopez <alopgeek at gmail.com>
>>>>> Cc: "openstack-operators at lists.openstack.org" <
>>>>> openstack-operators at lists.openstack.org>
>>>>> Subject: Re: [Openstack-operators] [glance] Image enters "killed"
>>>>> state on upload
>>>>>
>>>>> Here is a output from my system instead of my blabbering in a long
>>>>> winded email
>>>>>
>>>>> root at ctrl1:~# uname -a
>>>>> Linux ctrl1 3.19.0-43-generic #49~14.04.1-Ubuntu SMP Thu Dec 31
>>>>> 15:44:49 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
>>>>>
>>>>> root at ctrl1:~# df -h
>>>>> Filesystem                                  Size        Used
>>>>> Avail     Use%         Mounted on
>>>>> udev                                           7.9G       4.0K
>>>>> 7.9G         1%          /dev
>>>>> tmpfs                                          1.6G       724K
>>>>> 1.6G         1%          /run
>>>>> /dev/mapper/ctrl1--vg-root        396G      6.4G        370G
>>>>> 2%         /
>>>>> none                                           4.0K
>>>>> 0               4.0K         0%         /sys/fs/cgroup
>>>>> none                                           5.0M       0
>>>>>               5.0M         0%        /run/lock
>>>>> none                                           7.9G
>>>>> 0              7.9G          0%        /run/shm
>>>>> none                                           100M
>>>>> 0              100M         0%        /run/user
>>>>> /dev/sdc1                                   236M      38M
>>>>> 186M       17%        /boot
>>>>> 10.16.16.30:/srv/glance              739G     97G
>>>>> 604G        14%        /var/lib/glance/images
>>>>>
>>>>> And to save from massed output from a LS, ever file in
>>>>> /var/lib/glance/images is: -rw-r----- 1 glance glance
>>>>>
>>>>> No apparmour installed or configured
>>>>>
>>>>> On Wed, 3 Feb 2016 at 10:17 Abel Lopez <alopgeek at gmail.com> wrote:
>>>>>
>>>>>> Ok, with file store, some of the silly things that crop up are around
>>>>>> directory permissions, disk space, SELinux/apparmour.
>>>>>>
>>>>>> Make sure the glance user and group have ownership (recursively) of
>>>>>> the /var/lib/glance directory, make sure you're not low on space, if you
>>>>>> have SELinux set to enforcing, test setting it to permissive (if that is
>>>>>> the issue, resolve the contexts)
>>>>>>
>>>>>> On Feb 2, 2016, at 3:13 PM, Liam Haworth <
>>>>>> liam.haworth at bluereef.com.au> wrote:
>>>>>>
>>>>>> Glance is configured to use file store to /var/lib/glance/images
>>>>>>
>>>>>> On Wed, 3 Feb 2016 at 10:12 Abel Lopez <alopgeek at gmail.com> wrote:
>>>>>>
>>>>>>> I ran into a similar issue in Havana, but that was because we were
>>>>>>> doing some 'behind-the-scenes' modification of the image (format
>>>>>>> conversion)
>>>>>>> Once we stopped that, the issue went away.
>>>>>>>
>>>>>>> What is your glance store configured as?
>>>>>>>
>>>>>>> On Feb 2, 2016, at 3:05 PM, Liam Haworth <
>>>>>>> liam.haworth at bluereef.com.au> wrote:
>>>>>>>
>>>>>>> Hey All,
>>>>>>>
>>>>>>> This sounds like an old bug after trying to google it but everything
>>>>>>> I found doesn't really seem to help. I'm trying to upload a 2.5GB QCOW2
>>>>>>> image to glance to be used by users, the upload goes fine and in the glance
>>>>>>> registry logs I can see that it has successfully saved the image but then
>>>>>>> it does this
>>>>>>>
>>>>>>> 2016-02-03 09:51:49.607 2826 DEBUG glance.registry.api.v1.images
>>>>>>> [req-5ba18ea3-5777-4023-9f85-040aca48dfa7 --trunced-- - - -] Updating image
>>>>>>> 03a920ce-7979-4439-ab71-bc3dd34df3d3 with metadata: {u'status': u'killed'}
>>>>>>> update /usr/lib/python2.7/dist-packages/glance/registry/api/v1/images.py:470
>>>>>>>
>>>>>>> What reasons are their for it to do this to an image that just
>>>>>>> successfully uploaded?
>>>>>>>
>>>>>>> Thanks,
>>>>>>>
>>>>>>> Liam Haworth.
>>>>>>> --
>>>>>>> *Liam Haworth* | Junior Software Engineer | www.bluereef.com.au
>>>>>>> *_________________________________________________________________*
>>>>>>> *T*: +61 3 9898 8000 | *F*: +61 3 9898 8055
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> OpenStack-operators mailing list
>>>>>>> OpenStack-operators at lists.openstack.org
>>>>>>>
>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-operators
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>> *Liam Haworth* | Junior Software Engineer | www.bluereef.com.au
>>>>>> *_________________________________________________________________*
>>>>>> *T*: +61 3 9898 8000 | *F*: +61 3 9898 8055
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>> *Liam Haworth* | Junior Software Engineer | www.bluereef.com.au
>>>>> *_________________________________________________________________*
>>>>> *T*: +61 3 9898 8000 | *F*: +61 3 9898 8055
>>>>>
>>>>>
>>>>> --
>>>> *Liam Haworth* | Junior Software Engineer | www.bluereef.com.au
>>>> *_________________________________________________________________*
>>>> *T*: +61 3 9898 8000 | *F*: +61 3 9898 8055
>>>>
>>>>
>>>> --
>>> *Liam Haworth* | Junior Software Engineer | www.bluereef.com.au
>>> *_________________________________________________________________*
>>> *T*: +61 3 9898 8000 | *F*: +61 3 9898 8055
>>>
>>>
>>> --
>> *Liam Haworth* | Junior Software Engineer | www.bluereef.com.au
>> *_________________________________________________________________*
>> *T*: +61 3 9898 8000 | *F*: +61 3 9898 8055
>>
>>
>> --
*Liam Haworth* | Junior Software Engineer | www.bluereef.com.au
*_________________________________________________________________*
*T*: +61 3 9898 8000 | *F*: +61 3 9898 8055
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-operators/attachments/20160203/bc7bfd7f/attachment.html>