[Openstack-operators] While adding external bridge connection lost to the network node
Britt Houser (bhouser)
bhouser at cisco.com
Mon Nov 24 16:35:47 UTC 2014
If you created the br-ex bridge after restarting networking, that might be the source of your error. Might try restarting networking or rebooting the VM. You can tell its working if you see br-ex with and IP address in the output of ifconfig, and if you can ping that address.
Thx,
britt
From: Geo Varghese <gvarghese at aqorn.com<mailto:gvarghese at aqorn.com>>
Date: Monday, November 24, 2014 at 8:32 AM
To: Britt Houser <bhouser at cisco.com<mailto:bhouser at cisco.com>>
Cc: "openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>" <openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>>, "openstack-operators at lists.openstack.org<mailto:openstack-operators at lists.openstack.org>" <openstack-operators at lists.openstack.org<mailto:openstack-operators at lists.openstack.org>>
Subject: Re: [Openstack-operators] While adding external bridge connection lost to the network node
Britt,
Its okay. Thanks a lot your time.
I just added br-ex successfully. How can we verify its working. Please check below ovs-vsctl show
=============
root at controller:/home/geo# ovs-vsctl show
b97bd565-6196-40f2-8f3e-c8f21c04c98f
Bridge br-ex
Port "eth0"
Interface "eth0"
Port br-ex
Interface br-ex
type: internal
Bridge br-tun
Port br-tun
Interface br-tun
type: internal
Port "gre-c0a87bb3"
Interface "gre-c0a87bb3"
type: gre
options: {in_key=flow, local_ip="192.168.123.54", out_key=flow, remote_ip="192.168.123.179"}
Port "gre-c0a87a36"
Interface "gre-c0a87a36"
type: gre
options: {in_key=flow, local_ip="192.168.123.54", out_key=flow, remote_ip="192.168.122.54"}
Port "gre-7f000001"
Interface "gre-7f000001"
type: gre
options: {in_key=flow, local_ip="192.168.123.54", out_key=flow, remote_ip="127.0.0.1"}
Port patch-int
Interface patch-int
type: patch
options: {peer=patch-tun}
Bridge br-int
fail_mode: secure
Port "qvof64e7b35-cb"
tag: 1
Interface "qvof64e7b35-cb"
Port "tapbb0d455b-79"
tag: 1
Interface "tapbb0d455b-79"
type: internal
Port patch-tun
Interface patch-tun
type: patch
options: {peer=patch-int}
Port "qvo887bf763-8d"
tag: 1
Interface "qvo887bf763-8d"
Port br-int
Interface br-int
type: internal
Port "int-br-eth1"
Interface "int-br-eth1"
Port "tapa72fb9d6-4a"
tag: 2
Interface "tapa72fb9d6-4a"
type: internal
ovs_version: "2.0.2
=============
On Mon, Nov 24, 2014 at 6:22 PM, Britt Houser (bhouser) <bhouser at cisco.com<mailto:bhouser at cisco.com>> wrote:
Geo,
Sorry for not getting back sooner. Was out sick. Can you post the output of 'ovs-vsctl show'? I didn’t see a br-ex interface in your ifconfig output.
Thx,
britt
From: Geo Varghese <gvarghese at aqorn.com<mailto:gvarghese at aqorn.com>>
Date: Friday, November 21, 2014 at 1:39 PM
To: Britt Houser <bhouser at cisco.com<mailto:bhouser at cisco.com>>
Cc: "openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>" <openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>>, "openstack-operators at lists.openstack.org<mailto:openstack-operators at lists.openstack.org>" <openstack-operators at lists.openstack.org<mailto:openstack-operators at lists.openstack.org>>
Subject: Re: [Openstack-operators] While adding external bridge connection lost to the network node
Britt,
Just tried it but network restart failed if I add these lines. Also IP not assigned to bridge when controller restarted.
When try to do following command after this change
ifdown eth0
Show error in following line in /etc/network/interfaces
iface br-ex inet static
Thanks again for your support.
On Fri, Nov 21, 2014 at 6:05 PM, Britt Houser (bhouser) <bhouser at cisco.com<mailto:bhouser at cisco.com>> wrote:
The br-ex config looks right, but you don't want eth0 to DHCP for an
address anymore. Once its attached to br-ex, its an L2-only interface
(similar to switchport on cisco switch). I think you want something like
this for eth0:
auto eth0
iface eth0 inet manual
pre-up ifconfig $IFACE up
post-down ifconfig $IFACE down
Thx,
britt
From: Geo Varghese <gvarghese at aqorn.com<mailto:gvarghese at aqorn.com>>
Date: Friday, November 21, 2014 at 7:22 AM
To: Britt Houser <bhouser at cisco.com<mailto:bhouser at cisco.com>>
Cc: "openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>" <openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>>,
"openstack-operators at lists.openstack.org<mailto:openstack-operators at lists.openstack.org>"
<openstack-operators at lists.openstack.org<mailto:openstack-operators at lists.openstack.org>>
Subject: Re: [Openstack-operators] While adding external bridge
connection lost to the network node
Thanks Britt.
You mean like this right?
cat /etc/network/interfaces
=========================
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet dhcp
# The external network interface
auto br-ex
iface br-ex inet static
address 192.168.122.54
netmask 255.255.255.0
gateway 192.168.122.1
dns-nameservers 8.8.8.8 8.8.4.4
==========================================================
On Fri, Nov 21, 2014 at 5:48 PM, Britt Houser (bhouser)
<bhouser at cisco.com<mailto:bhouser at cisco.com>> wrote:
Correct. You need to updated your /etc/interfaces file so that the
192.168.122.54/24<http://192.168.122.54/24> <http://192.168.122.54/24> address gets assigned to
br-ex instead of eth0.
From: Geo Varghese <gvarghese at aqorn.com<mailto:gvarghese at aqorn.com>>
Date: Friday, November 21, 2014 at 7:16 AM
To: Britt Houser <bhouser at cisco.com<mailto:bhouser at cisco.com>>
Cc: "openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>" <openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>>,
"openstack-operators at lists.openstack.org<mailto:openstack-operators at lists.openstack.org>"
<openstack-operators at lists.openstack.org<mailto:openstack-operators at lists.openstack.org>>
Subject: Re: [Openstack-operators] While adding external bridge connection
lost to the network node
Hi Britt,
Thanks for the answer.
I am using Virtual machine(KVM) for openstack installation. Its a single
node installation.
Now i can create instance from openstack dahboard and and can login in to
the instance from dashboard konsole.
But i couln't connect to instance from controller node.
Also i couldn't have connection between instances.
Ifconfig output from openstack installation node
=======================
root at ubuntu:/home/geo# ifconfig
br-int Link encap:Ethernet HWaddr 26:73:95:7a:c5:4e
inet6 addr: fe80::ec9d:9aff:fe2f:66ab/64 Scope:Link
UP BROADCAST RUNNING MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:648 (648.0 B)
br-tun Link encap:Ethernet HWaddr 0e:af:b2:8e:89:44
inet6 addr: fe80::c89f:cfff:fe74:712/64 Scope:Link
UP BROADCAST RUNNING MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:648 (648.0 B)
eth0 Link encap:Ethernet HWaddr 52:54:00:d6:4c:4f
inet addr:192.168.122.54 Bcast:192.168.122.255
Mask:255.255.255.0
inet6 addr: fe80::5054:ff:fed6:4c4f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:162 errors:0 dropped:3 overruns:0 frame:0
TX packets:100 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16187 (16.1 KB) TX bytes:13445 (13.4 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:737 errors:0 dropped:0 overruns:0 frame:0
TX packets:737 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:104803 (104.8 KB) TX bytes:104803 (104.8 KB)
tap561bdedf-3e Link encap:Ethernet HWaddr 42:c5:72:1c:3b:99
inet6 addr: fe80::40c5:72ff:fe1c:3b99/64 Scope:Link
UP BROADCAST RUNNING MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:648 (648.0 B)
tapde436ec7-3b Link encap:Ethernet HWaddr b6:09:88:dc:f7:5a
inet6 addr: fe80::b409:88ff:fedc:f75a/64 Scope:Link
UP BROADCAST RUNNING MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:648 (648.0 B)
======================================
Same eth0 i have used to add br-ex, you mean thats the issue right?
On Fri, Nov 21, 2014 at 5:31 PM, Britt Houser (bhouser)
<bhouser at cisco.com<mailto:bhouser at cisco.com>> wrote:
Was the interface you added to br-ex the same interface to which you
connected to the box? If so, this is expected. When you add an interface
to the bridge you lose IP connectivity to that interface. The IP address
which which was assigned to the interface
now needs to be assigned to the br-ex bridge, and then you'll have
connectivity once again.
Thx,
britt
From: Geo Varghese <gvarghese at aqorn.com<mailto:gvarghese at aqorn.com>>
Date: Friday, November 21, 2014 at 1:39 AM
To: "openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>" <openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>>,
"openstack-operators at lists.openstack.org<mailto:openstack-operators at lists.openstack.org>"
<openstack-operators at lists.openstack.org<mailto:openstack-operators at lists.openstack.org>>
Subject: [Openstack-operators] While adding external bridge connection
lost to the network node
Hi Team,
While adding external bridge connection lost to the network node from
other nodes. we couldn't ssh to network node after creating bridge.
If we do below steps of following link
http://docs.openstack.org/icehouse/install-guide/install/apt/content/neutro
n-ml2-network-node.html<http://docs.openstack.org/icehouse/install-guide/install/apt/content/neutron-ml2-network-node.html>
===========================================
3) Add the external bridge:
# ovs-vsctl add-br br-ex
4) Add a port to the external bridge that connects to the physical
external network interface:
Replace INTERFACE_NAME with the actual interface name. For example, eth2
or ens256.
# ovs-vsctl add-port br-ex INTERFACE_NAME
=============================================
External connection to network node fails. Then we couldn't connect to
network node from other machines.
Any one faced this issue?
Please help us to fix this issue.
--
Regards,
Geo Varghese
--
--
Regards,
Geo Varghese
--
--
Regards,
Geo Varghese
--
--
Regards,
Geo Varghese
--
--
Regards,
Geo Varghese
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-operators/attachments/20141124/a6bc06d8/attachment.html>
More information about the OpenStack-operators
mailing list