Open Stack

Hi Nhan, 
I guess more information is required to help you out there. 

It would be helpful to know which setup you're using, e.g. a singlenode
or multinode setup, openvswitch for network virtualiation or something
else? Are you using nova network or neutron networking?

If I got it right you created a tenant network in openstack (in your
case vm network). In addition your host (hypervisor) has a an eth
interface into the physical network, right? 

You also mentioned that your physical network is a vlan network. Is your
hypervisor aware of this vlan tagging or is this done by a access port
config in your switch?


And what you want to achieve is to connect a vm attached to the
openstack vm network to your physical vlan network. Did I get you right?

Basically you would create a so called "provider network" that
represents your physical network and connect this provider network via a
virtual router to your vm network.

More information you can find here:
http://docs.openstack.org/admin-guide-cloud/content/under_the_hood_openvswitch.html#under_the_hood_openvswitch_scenario1


Regards,
Andreas



On Fri, 2014-08-15 at 00:00 +0700, Nhan Cao wrote:
> Hi 
> I have to network:
> vm network: 10.2.21.0/24 
> exist VLAN network: 192.168.1.0/24
> I want to connect from my VM network to physic VLAN network. 
> 
> How i config to connect?
> 
> 
> 
> Thanks :)
> 
> 
> _______________________________________________
> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to     : openstack at lists.openstack.org
> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack