[TripleO] Support of PTP in Openstack Train

Takashi Kajinami tkajinam at redhat.com
Mon May 16 14:47:13 UTC 2022 

If my observations are correct, there are two bugs causing the error and
there is no feasible workaround.

1. puppet-tripleo is not parsing output of the os-net-config command
properly.
2. os-net-config it is not formatting the dict value properly and the
output can't be parsed by json decoder.

I've reported the 2nd bug here.
 https://bugs.launchpad.net/os-net-config/+bug/1973566

Once the 2nd bug is fixed in master and stable branches back to train, then
we'd be able to consider
how we can implement a proper parsing but I can't guarantee any timeline
atm.

The puppet implementation was replaced by ansible and is no longer used in
recent versions like
wallaby and the above problems do not exist.  It might be an option to try
ptp deployment in Wallaby.

On Mon, May 16, 2022 at 9:18 PM Anirudh Gupta <anyrude10 at gmail.com> wrote:

> Hi Takashi
>
> Could you infer anything from the output and the issue being faced?
>
> Is it because the output has keys and values as string? Any workaround to
> resolve this issue?
>
> Regards
> Anirudh
>
> On Fri, 13 May, 2022, 11:15 Anirudh Gupta, <anyrude10 at gmail.com> wrote:
>
>> Hi Takashi,
>>
>> Thanks for your reply.
>>
>> I tried executing the suggested command and below is the output
>>
>> [heat-admin at overcloud-controller-1 ~]$ /bin/os-net-config -i eno1
>> {'eno1': 'eno1'}
>>
>> Regards
>> Anirudh Gupta
>>
>> On Thu, May 12, 2022 at 11:03 AM Takashi Kajinami <tkajinam at redhat.com>
>> wrote:
>>
>>> The puppy implementation executes the following command to get the
>>> interface information.
>>>   /bin/os-net-config -i <interface name>
>>> I'd recommend you check the command output in *all overcloud nodes *.
>>>
>>> If you need to use different interfaces for different roles then you
>>> need to define the parameter
>>> as role specific one, defined under <role>Parameters.
>>>
>>> On Wed, May 11, 2022 at 4:26 PM Anirudh Gupta <anyrude10 at gmail.com>
>>> wrote:
>>>
>>>> Hi Takashi,
>>>>
>>>> Thanks for clarifying my issues regarding the support of PTP in Wallaby
>>>> Release.
>>>>
>>>> In Train, I have also tried passing the exact interface name and took 2
>>>> runs with and without quotes like below:
>>>>
>>>>
>>>> *PtpInterface: eno1*
>>>>
>>>> *PtpInterface: 'eno1'*
>>>>
>>>> But in both the cases, the issue observed was similar
>>>>
>>>> 2022-05-11 10:33:20.189107 | 5254001f-9952-934d-e901-0000000030be |
>>>>  FATAL | Wait for puppet host configuration to finish |
>>>> overcloud-controller-2 | error={"ansible_job_id": "526310775819.36650",
>>>> "attempts": 3, "changed": true, "cmd": "set -o pipefail; puppet apply
>>>>  --modulepath=/etc/puppet/modules:/opt/stack/puppet-modules:/usr/share/openstack-puppet/modules
>>>> --detailed-exitcodes --summarize --color=false
>>>> /var/lib/tripleo-config/puppet_step_config.pp 2>&1 | logger -s -t
>>>> puppet-user", "delta": "0:00:04.289208", "end": "2022-05-11
>>>> 10:33:08.195052", "failed_when_result": true, "finished": 1, "msg":
>>>> "non-zero return code", "rc": 1, "start": "2022-05-11 10:33:03.905844",
>>>> "stderr": "<13>May 11 10:33:03 puppet-user: Warning: The function 'hiera'
>>>> is deprecated in favor of using 'lookup'. See
>>>> https://puppet.com/docs/puppet/5.5/deprecated_language.html\\n   (file
>>>> & line not available)\n<13>May 11 10:33:03 puppet-user: Warning:
>>>> /etc/puppet/hiera.yaml: Use of 'hiera.yaml' version 3 is deprecated. It
>>>> should be converted to version 5\n<13>May 11 10:33:03 puppet-user:
>>>>  (file: /etc/puppet/hiera.yaml)\n<13>May 11 10:33:03 puppet-user: Warning:
>>>> Undefined variable '::deploy_config_name'; \\n   (file & line not
>>>> available)\n<13>May 11 10:33:03 puppet-user: Warning: ModuleLoader: module
>>>> 'tripleo' has unresolved dependencies - it will only see those that are
>>>> resolved. Use 'puppet module list --tree' to see information about
>>>> modules\\n   (file & line not available)\n<13>May 11 10:33:03 puppet-user:
>>>> Error: Evaluation Error: A substring operation does not accept a String as
>>>> a character index. Expected an Integer (file:
>>>> /etc/puppet/modules/tripleo/manifests/profile/base/time/ptp.pp, line: 41,
>>>> column: 46) on node overcloud-controller-2.localdomain", "stderr_lines":
>>>> ["<13>May 11 10:33:03 puppet-user: Warning: The function 'hiera' is
>>>> deprecated in favor of using 'lookup'. See
>>>> https://puppet.com/docs/puppet/5.5/deprecated_language.html\\n   (file
>>>> & line not available)", "<13>May 11 10:33:03 puppet-user: Warning:
>>>> /etc/puppet/hiera.yaml: Use of 'hiera.yaml' version 3 is deprecated. It
>>>> should be converted to version 5", "<13>May 11 10:33:03 puppet-user:
>>>>  (file: /etc/puppet/hiera.yaml)", "<13>May 11 10:33:03 puppet-user:
>>>> Warning: Undefined variable '::deploy_config_name'; \\n   (file & line not
>>>> available)", "<13>May 11 10:33:03 puppet-user: Warning: ModuleLoader:
>>>> module 'tripleo' has unresolved dependencies - it will only see those that
>>>> are resolved. Use 'puppet module list --tree' to see information about
>>>> modules\\n   (file & line not available)", "<13>May 11 10:33:03
>>>> puppet-user: *Error: Evaluation Error: A substring operation does not
>>>> accept a String as a character index. Expected an Integer (file:
>>>> /etc/puppet/modules/tripleo/manifests/profile/base/time/ptp.pp, line: 41,
>>>> column: 46) on node overcloud-controller-2.localdomain"], "stdout": "",
>>>> "stdout_lines": []}*
>>>> 2022-05-11 10:33:20.190263 | 5254001f-9952-934d-e901-0000000030be |
>>>> TIMING | Wait for puppet host configuration to finish |
>>>> overcloud-controller-2 | 0:12:41.268734 | 7.01s
>>>>
>>>> I'll be highly grateful if you could further extend your support to
>>>> resolve the issue.
>>>>
>>>> Regards
>>>> Anirudh Gupta
>>>>
>>>> On Tue, May 10, 2022 at 9:15 PM Takashi Kajinami <tkajinam at redhat.com>
>>>> wrote:
>>>>
>>>>>
>>>>>
>>>>> On Wed, May 11, 2022 at 12:19 AM Anirudh Gupta <anyrude10 at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hi Takashi,
>>>>>>
>>>>>> Thanks for your suggestion.
>>>>>>
>>>>>> I downloaded the updated Train Images and they had the ptp.pp file
>>>>>> available on the overcloud and undercloud machines
>>>>>>
>>>>>> [root at overcloud-controller-1 /]# find . -name "ptp.pp"
>>>>>>
>>>>>> *./usr/share/openstack-puppet/modules/tripleo/manifests/profile/base/time/ptp.pp*
>>>>>>
>>>>>> With this, I re-executed the deployment and got the below error on
>>>>>> the machines
>>>>>>
>>>>>> 2022-05-10 20:05:53.133423 | 5254001f-9952-0364-51a1-0000000030ce |
>>>>>>    FATAL | Wait for puppet host configuration to finish |
>>>>>> overcloud-controller-1 | error={"ansible_job_id": "321785316135.36755",
>>>>>> "attempts": 3, "changed": true, "cmd": "set -o pipefail; puppet apply
>>>>>>  --modulepath=/etc/puppet/modules:/opt/stack/puppet-modules:/usr/share/openstack-puppet/modules
>>>>>> --detailed-exitcodes --summarize --color=false
>>>>>> /var/lib/tripleo-config/puppet_step_config.pp 2>&1 | logger -s -t
>>>>>> puppet-user", "delta": "0:00:04.279435", "end": "2022-05-10
>>>>>> 20:05:41.355328", "failed_when_result": true, "finished": 1, "msg":
>>>>>> "non-zero return code", "rc": 1, "start": "2022-05-10 20:05:37.075893",
>>>>>> "stderr": "<13>May 10 20:05:37 puppet-user: Warning: The function 'hiera'
>>>>>> is deprecated in favor of using 'lookup'. See
>>>>>> https://puppet.com/docs/puppet/5.5/deprecated_language.html\\n
>>>>>> (file & line not available)\n<13>May 10 20:05:37 puppet-user: Warning:
>>>>>> /etc/puppet/hiera.yaml: Use of 'hiera.yaml' version 3 is deprecated. It
>>>>>> should be converted to version 5\n<13>May 10 20:05:37 puppet-user:
>>>>>>  (file: /etc/puppet/hiera.yaml)\n<13>May 10 20:05:37 puppet-user: Warning:
>>>>>> Undefined variable '::deploy_config_name'; \\n   (file & line not
>>>>>> available)\n<13>May 10 20:05:37 puppet-user: Warning: ModuleLoader: module
>>>>>> 'tripleo' has unresolved dependencies - it will only see those that are
>>>>>> resolved. Use 'puppet module list --tree' to see information about
>>>>>> modules\\n   (file & line not available)\n<13>May 10 20:05:37 puppet-user:
>>>>>> Error: Evaluation Error: A substring operation does not accept a String as
>>>>>> a character index. Expected an Integer (file:
>>>>>> /etc/puppet/modules/tripleo/manifests/profile/base/time/ptp.pp, line: 41,
>>>>>> column: 46) on node overcloud-controller-1.localdomain", "stderr_lines":
>>>>>> ["<13>May 10 20:05:37 puppet-user: Warning: The function 'hiera' is
>>>>>> deprecated in favor of using 'lookup'. See
>>>>>> https://puppet.com/docs/puppet/5.5/deprecated_language.html\\n
>>>>>> (file & line not available)", "<13>May 10 20:05:37 puppet-user: Warning:
>>>>>> /etc/puppet/hiera.yaml: Use of 'hiera.yaml' version 3 is deprecated. It
>>>>>> should be converted to version 5", "<13>May 10 20:05:37 puppet-user:
>>>>>>  (file: /etc/puppet/hiera.yaml)", "<13>May 10 20:05:37 puppet-user:
>>>>>> Warning: Undefined variable '::deploy_config_name'; \\n   (file & line not
>>>>>> available)", "<13>May 10 20:05:37 puppet-user: Warning: ModuleLoader:
>>>>>> module 'tripleo' has unresolved dependencies - it will only see those that
>>>>>> are resolved. Use 'puppet module list --tree' to see information about
>>>>>> modules\\n   (file & line not available)", "<13>May 10 20:05:37
>>>>>> puppet-user: *Error: Evaluation Error: A substring operation does
>>>>>> not accept a String as a character index. Expected an Integer (file:
>>>>>> /etc/puppet/modules/tripleo/manifests/profile/base/time/ptp.pp, line: 41,
>>>>>> column: 46) *on node overcloud-controller-1.localdomain"], "stdout":
>>>>>> "", "stdout_lines": []}
>>>>>>
>>>>>> The file */etc/puppet/modules/tripleo/manifests/profile/base/time/ptp.pp,
>>>>>> line: 41, column: 46 *had the following code:
>>>>>>  34 class tripleo::profile::base::time::ptp (
>>>>>>      35   $ptp4l_interface                = 'eth0',
>>>>>>      36   $ptp4l_conf_slaveonly           = 1,
>>>>>>      37   $ptp4l_conf_network_transport   = 'UDPv4',
>>>>>>      38 ) {
>>>>>>      39
>>>>>>      40   $interface_mapping = generate('/bin/os-net-config', '-i',
>>>>>> $ptp4l_interface)
>>>>>>      41   *$ptp4l_interface_name =
>>>>>> $interface_mapping[$ptp4l_interface]*
>>>>>>
>>>>>>
>>>>>> *"/usr/share/openstack-tripleo-heat-templates/environments/services/ptp.yaml"* file
>>>>>> is as below:
>>>>>>
>>>>>> resource_registry:
>>>>>>   # FIXME(bogdando): switch it, once it is containerized
>>>>>>   OS::TripleO::Services::Ptp:
>>>>>> ../../deployment/time/ptp-baremetal-puppet.yaml
>>>>>>   OS::TripleO::Services::Timesync: OS::TripleO::Services::Ptp
>>>>>>
>>>>>> parameter_defaults:
>>>>>>   # PTP hardware interface name
>>>>>>   *PtpInterface: 'nic1'*
>>>>>>
>>>>>>   # Configure PTP clock in slave mode
>>>>>>   PtpSlaveMode: 1
>>>>>>
>>>>>>   # Configure PTP message transport protocol
>>>>>>   PtpMessageTransport: 'UDPv4'
>>>>>>
>>>>>> I have also tried modifying the entry as below:
>>>>>>  *PtpInterface: 'nic1' #*(i.e. without quotes), but the error
>>>>>> remains the same.
>>>>>>
>>>>>> Queries:
>>>>>>
>>>>>>    1. Any pointers to resolve this?
>>>>>>
>>>>>> I'm not familiar with ptp but you'd need to use the actual interface
>>>>> name
>>>>> if you are not using the alias name.
>>>>>
>>>>>
>>>>>
>>>>>>
>>>>>>    1. You were mentioning something about the support of PTP not
>>>>>>    there in the wallaby release. Can you please confirm?
>>>>>>
>>>>>> IIUC PTP is still supported even in master. What we removed is the
>>>>> implementation using Puppet
>>>>> which was replaced by ansible.
>>>>>
>>>>> The warning regarding OS::TripleO::Services::Ptp was added when we
>>>>> decided to merge
>>>>> all time sync services to the single service resource which is
>>>>> OS::TripleO::Services::Timesync[1].
>>>>> It's related to how resources are defined in Heat and doesn't affect
>>>>> configuration support itself.
>>>>>
>>>>> [1]
>>>>> https://review.opendev.org/c/openstack/tripleo-heat-templates/+/586679
>>>>>
>>>>>
>>>>>
>>>>>> It would be a great help if you could extend a little more support to
>>>>>> resolve the issues.
>>>>>>
>>>>>> Regards
>>>>>> Anirudh Gupta
>>>>>>
>>>>>>
>>>>>> On Tue, May 10, 2022 at 6:07 PM Anirudh Gupta <anyrude10 at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> I'll check that well.
>>>>>>> By the way, I downloaded the images from the below link
>>>>>>>
>>>>>>>
>>>>>>> https://images.rdoproject.org/centos8/train/rdo_trunk/current-tripleo/
>>>>>>>
>>>>>>> They seem to be updated yesterday, I'll download and try the
>>>>>>> deployment with the latest images.
>>>>>>>
>>>>>>> Also are you pointing that the support for PTP would not be there in
>>>>>>> Wallaby Release?
>>>>>>>
>>>>>>> Regards
>>>>>>> Anirudh Gupta
>>>>>>>
>>>>>>> On Tue, May 10, 2022 at 5:44 PM Takashi Kajinami <
>>>>>>> tkajinam at redhat.com> wrote:
>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, May 10, 2022 at 8:57 PM Anirudh Gupta <anyrude10 at gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Hi Takashi
>>>>>>>>>
>>>>>>>>> I have checked this in undercloud only.
>>>>>>>>> I don't find any such file in overcloud. Could this be a concern?
>>>>>>>>>
>>>>>>>>
>>>>>>>> The manifest should exist in overcloud nodes and the missing file
>>>>>>>> is the exact cause
>>>>>>>> of that puppet failure during deployment.
>>>>>>>>
>>>>>>>> Please check your overcloud images used to install overcloud nodes
>>>>>>>> and ensure that
>>>>>>>> you're using the right one. You might be using the image for a
>>>>>>>> different release.
>>>>>>>> We removed the manifest file during the Wallaby cycle.
>>>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>> Regards
>>>>>>>>> Anirudh Gupta
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, May 10, 2022 at 5:08 PM Takashi Kajinami <
>>>>>>>>> tkajinam at redhat.com> wrote:
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Tue, May 10, 2022 at 8:33 PM Takashi Kajinami <
>>>>>>>>>> tkajinam at redhat.com> wrote:
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Tue, May 10, 2022 at 6:58 PM Anirudh Gupta <
>>>>>>>>>>> anyrude10 at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi Takashi,
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks for your reply.
>>>>>>>>>>>>
>>>>>>>>>>>> I have checked on my machine and the file "ptp.pp" do exist at
>>>>>>>>>>>> path "
>>>>>>>>>>>> *./usr/share/openstack-puppet/modules/tripleo/manifests/profile/base/time/ptp.pp*
>>>>>>>>>>>> "
>>>>>>>>>>>>
>>>>>>>>>>> Did you check this in your undercloud or overcloud ?
>>>>>>>>>>> During the deployment all configuration files are generated
>>>>>>>>>>> using puppet modules
>>>>>>>>>>> installed in overcloud nodes, so you should check this in
>>>>>>>>>>> overcloud nodes.
>>>>>>>>>>>
>>>>>>>>>>> Also, the deprecation warning is not implemented
>>>>>>>>>>>
>>>>>>>>>> Ignore this incomplete line. I was looking for the implementation
>>>>>>>>>> which shows the warning
>>>>>>>>>> but I found it in tripleoclient and it looks reasonable according
>>>>>>>>>> to what we have in
>>>>>>>>>> environments/services/ptp.yaml .
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> I tried putting OS::TripleO::Services::Ptp in my roles_data "*ServicesDefault"
>>>>>>>>>>>> for controller and compute *before rendering the templates,
>>>>>>>>>>>> but still I am getting the same issue on all the 3 Controllers and 1 Compute
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> IIUC you don't need this because OS::TripleO::Services::Timesync
>>>>>>>>>>> becomes an alias
>>>>>>>>>>> to the Ptp service resource when you use the ptp environment
>>>>>>>>>>> file.
>>>>>>>>>>>
>>>>>>>>>>> https://github.com/openstack/tripleo-heat-templates/blob/stable/train/environments/services/ptp.yaml#L5-L6
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> *Error: Evaluation Error: Error while evaluating a Function
>>>>>>>>>>>> Call, Could not find class ::tripleo::profile::base::time::ptp for
>>>>>>>>>>>> overcloud-controller-0.localdomain (file:
>>>>>>>>>>>> /var/lib/tripleo-config/puppet_step_config.pp, line: 41, column: 1) on node* overcloud-controller-0.localdomain"],
>>>>>>>>>>>> "stdout": "", "stdout_lines": []}
>>>>>>>>>>>>
>>>>>>>>>>>> Can you suggest any workarounds or any pointers to look further
>>>>>>>>>>>> in order to resolve this issue?
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> Regards
>>>>>>>>>>>> Anirudh Gupta
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Tue, May 10, 2022 at 2:18 PM Takashi Kajinami <
>>>>>>>>>>>> tkajinam at redhat.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> I'm not familiar with PTP, but the error you pasted indicates
>>>>>>>>>>>>> that the required puppet manifest does not exist in your overcloud
>>>>>>>>>>>>> node/image.
>>>>>>>>>>>>>
>>>>>>>>>>>>> https://github.com/openstack/puppet-tripleo/blob/stable/train/manifests/profile/base/time/ptp.pp
>>>>>>>>>>>>>
>>>>>>>>>>>>> This should not happen and the class should exist as long as
>>>>>>>>>>>>> you have puppet-tripleo from stable/train installed.
>>>>>>>>>>>>>
>>>>>>>>>>>>> I'd recommend you check installed tripleo/puppet packages and
>>>>>>>>>>>>> ensure everything is in the consistent release.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Tue, May 10, 2022 at 5:28 AM Anirudh Gupta <
>>>>>>>>>>>>> anyrude10 at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi All
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Any update on this?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Regards
>>>>>>>>>>>>>> Anirudh Gupta
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Mon, 9 May, 2022, 17:21 Anirudh Gupta, <
>>>>>>>>>>>>>> anyrude10 at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi Team,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Is there any Support for PTP in Openstack TripleO ?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> When I was executing the Overcloud deployment script,
>>>>>>>>>>>>>>> passing the PTP yaml, it gave the following option at the starting
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> *service OS::TripleO::Services::Ptp is enabled in
>>>>>>>>>>>>>>> /usr/share/openstack-tripleo-heat-templates/environments/services/ptp.yaml.
>>>>>>>>>>>>>>> Deprecated in favour of OS::TripleO::Services::TimesyncDo you still wish to
>>>>>>>>>>>>>>> continue with deployment [y/N]*
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> even if passing Y, it starts executing for sometime and the
>>>>>>>>>>>>>>> gives the following error
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> *Error: Evaluation Error: Error while evaluating a Function
>>>>>>>>>>>>>>> Call, Could not find class ::tripleo::profile::base::time::ptp for
>>>>>>>>>>>>>>> overcloud-controller-0.localdomain (file:
>>>>>>>>>>>>>>> /var/lib/tripleo-config/puppet_step_config.pp, line: 41, column: 1) on node* overcloud-controller-0.localdomain"],
>>>>>>>>>>>>>>> "stdout": "", "stdout_lines": []}
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Can someone suggest some pointers in order to resolve this
>>>>>>>>>>>>>>> issue and move forward?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Regards
>>>>>>>>>>>>>>> Anirudh Gupta
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Fri, May 6, 2022 at 3:50 PM Anirudh Gupta <
>>>>>>>>>>>>>>> anyrude10 at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi Team,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I have installed Undercloud with Openstack Train Release
>>>>>>>>>>>>>>>> successfully.
>>>>>>>>>>>>>>>> I need to enable PTP service while deploying the overcloud
>>>>>>>>>>>>>>>> for which I have included the service in my deployment
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> openstack overcloud deploy --templates \
>>>>>>>>>>>>>>>>     -n /home/stack/templates/network_data.yaml \
>>>>>>>>>>>>>>>>     -r /home/stack/templates/roles_data.yaml \
>>>>>>>>>>>>>>>>     -e /home/stack/templates/environment.yaml \
>>>>>>>>>>>>>>>>     -e
>>>>>>>>>>>>>>>> /home/stack/templates/environments/network-isolation.yaml \
>>>>>>>>>>>>>>>>     -e
>>>>>>>>>>>>>>>> /home/stack/templates/environments/network-environment.yaml \
>>>>>>>>>>>>>>>>     -e
>>>>>>>>>>>>>>>> /usr/share/openstack-tripleo-heat-templates/environments/services/ironic-conductor.yaml
>>>>>>>>>>>>>>>> \
>>>>>>>>>>>>>>>>     -e
>>>>>>>>>>>>>>>> /usr/share/openstack-tripleo-heat-templates/environments/services/ironic-inspector.yaml
>>>>>>>>>>>>>>>> \
>>>>>>>>>>>>>>>>     -e
>>>>>>>>>>>>>>>> /usr/share/openstack-tripleo-heat-templates/environments/services/ironic-overcloud.yaml
>>>>>>>>>>>>>>>> \
>>>>>>>>>>>>>>>>    * -e
>>>>>>>>>>>>>>>> /usr/share/openstack-tripleo-heat-templates/environments/services/ptp.yaml
>>>>>>>>>>>>>>>> \*
>>>>>>>>>>>>>>>>     -e /home/stack/templates/ironic-config.yaml \
>>>>>>>>>>>>>>>>     -e
>>>>>>>>>>>>>>>> /usr/share/openstack-tripleo-heat-templates/environments/docker-ha.yaml \
>>>>>>>>>>>>>>>>     -e
>>>>>>>>>>>>>>>> /usr/share/openstack-tripleo-heat-templates/environments/podman.yaml \
>>>>>>>>>>>>>>>>     -e /home/stack/containers-prepare-parameter.yaml
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> But it gives the following error
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> 2022-05-06 11:30:10.707655 |
>>>>>>>>>>>>>>>> 5254001f-9952-7fed-4a6d-000000002fde | FATAL | Wait for puppet host
>>>>>>>>>>>>>>>> configuration to finish | overcloud-controller-0 | error={"ansible_job_id":
>>>>>>>>>>>>>>>> "5188783868.37685", "attempts": 3, "changed": true, "cmd": "set -o
>>>>>>>>>>>>>>>> pipefail; puppet apply
>>>>>>>>>>>>>>>> --modulepath=/etc/puppet/modules:/opt/stack/puppet-modules:/usr/share/openstack-puppet/modules
>>>>>>>>>>>>>>>> --detailed-exitcodes --summarize --color=false
>>>>>>>>>>>>>>>> /var/lib/tripleo-config/puppet_step_config.pp 2>&1 | logger -s -t
>>>>>>>>>>>>>>>> puppet-user", "delta": "0:00:04.440700", "end": "2022-05-06
>>>>>>>>>>>>>>>> 11:30:12.685508", "failed_when_result": true, "finished": 1, "msg":
>>>>>>>>>>>>>>>> "non-zero return code", "rc": 1, "start": "2022-05-06 11:30:08.244808",
>>>>>>>>>>>>>>>> "stderr": "<13>May 6 11:30:08 puppet-user: Warning: The function 'hiera' is
>>>>>>>>>>>>>>>> deprecated in favor of using 'lookup'. See
>>>>>>>>>>>>>>>> https://puppet.com/docs/puppet/6.14/deprecated_language.html\n<13>May
>>>>>>>>>>>>>>>> 6 11:30:08 puppet-user: (file & line not available)\n<13>May 6 11:30:08
>>>>>>>>>>>>>>>> puppet-user: Warning: /etc/puppet/hiera.yaml: Use of 'hiera.yaml' version 3
>>>>>>>>>>>>>>>> is deprecated. It should be converted to version 5\n<13>May 6 11:30:08
>>>>>>>>>>>>>>>> puppet-user: (file: /etc/puppet/hiera.yaml)\n<13>May 6 11:30:08
>>>>>>>>>>>>>>>> puppet-user: Warning: Undefined variable '::deploy_config_name'; \n<13>May
>>>>>>>>>>>>>>>> 6 11:30:08 puppet-user: (file & line not available)\n<13>May 6 11:30:08
>>>>>>>>>>>>>>>> puppet-user: Warning: Unknown variable: '::deployment_type'. (file:
>>>>>>>>>>>>>>>> /etc/puppet/modules/tripleo/manifests/profile/base/database/mysql/client.pp,
>>>>>>>>>>>>>>>> line: 89, column: 8)\n<13>May 6 11:30:08 puppet-user: error: Could not
>>>>>>>>>>>>>>>> connect to controller: Connection refused\n<13>May 6 11:30:08 puppet-user:
>>>>>>>>>>>>>>>> Error: Evaluation Error: Error while evaluating a Function Call, Could not
>>>>>>>>>>>>>>>> find class ::tripleo::profile::base::time::ptp for
>>>>>>>>>>>>>>>> overcloud-controller-0.localdomain (file:
>>>>>>>>>>>>>>>> /var/lib/tripleo-config/puppet_step_config.pp, line: 41, column: 1) on node
>>>>>>>>>>>>>>>> overcloud-controller-0.localdomain", "stderr_lines": ["<13>May 6 11:30:08
>>>>>>>>>>>>>>>> puppet-user: Warning: The function 'hiera' is deprecated in favor of using
>>>>>>>>>>>>>>>> 'lookup'. See
>>>>>>>>>>>>>>>> https://puppet.com/docs/puppet/6.14/deprecated_language.html",
>>>>>>>>>>>>>>>> "<13>May 6 11:30:08 puppet-user: (file & line not available)", "<13>May 6
>>>>>>>>>>>>>>>> 11:30:08 puppet-user: Warning: /etc/puppet/hiera.yaml: Use of 'hiera.yaml'
>>>>>>>>>>>>>>>> version 3 is deprecated. It should be converted to version 5", "<13>May 6
>>>>>>>>>>>>>>>> 11:30:08 puppet-user: (file: /etc/puppet/hiera.yaml)", "<13>May 6 11:30:08
>>>>>>>>>>>>>>>> puppet-user: Warning: Undefined variable '::deploy_config_name'; ",
>>>>>>>>>>>>>>>> "<13>May 6 11:30:08 puppet-user: (file & line not available)", "<13>May 6
>>>>>>>>>>>>>>>> 11:30:08 puppet-user: Warning: Unknown variable: '::deployment_type'.
>>>>>>>>>>>>>>>> (file:
>>>>>>>>>>>>>>>> /etc/puppet/modules/tripleo/manifests/profile/base/database/mysql/client.pp,
>>>>>>>>>>>>>>>> line: 89, column: 8)", "<13>May 6 11:30:08 puppet-user: error: Could not
>>>>>>>>>>>>>>>> connect to controller: Connection refused", "<13>May 6 11:30:08
>>>>>>>>>>>>>>>> puppet-user: *Error: Evaluation Error: Error while
>>>>>>>>>>>>>>>> evaluating a Function Call, Could not find class
>>>>>>>>>>>>>>>> ::tripleo::profile::base::time::ptp for overcloud-controller-0.localdomain
>>>>>>>>>>>>>>>> (file: /var/lib/tripleo-config/puppet_step_config.pp, line: 41, column: 1)
>>>>>>>>>>>>>>>> on node* overcloud-controller-0.localdomain"], "stdout":
>>>>>>>>>>>>>>>> "", "stdout_lines": []}
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Can someone please help in resolving this issue?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Regards
>>>>>>>>>>>>>>>> Anirudh Gupta
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20220516/00af762b/attachment-0001.htm>

More information about the openstack-discuss mailing list