Open Stack

Hi Team ,
Any support w.r.t the ipv6 based node provisioning for overcloud deployment.

We tried but is getting failed with said error.

-Lokendra

On Thu, 16 Jun 2022, 14:51 Brendan Shephard, <bshephar at redhat.com> wrote:

> Hey,
>
> Looks like your server is booting in Legacy BIOS mode but the PXE file
> Ironic is offering is for UEFI. Did you try booting in UEFI mode instead of
> Legacy BIOS?
>
> Brendan Shephard
>
> Software Engineer
>
> Red Hat APAC <https://www.redhat.com>
>
> 193 N Quay
>
> Brisbane City QLD 4000
> @RedHat <https://twitter.com/redhat>   Red Hat
> <https://www.linkedin.com/company/red-hat>  Red Hat
> <https://www.facebook.com/RedHatInc>
> <https://red.ht/sig>
> <https://redhat.com/summit>
>
>
> On Thu, Jun 16, 2022 at 5:05 PM Lokendra Rathour <
> lokendrarathour at gmail.com> wrote:
>
>> Hi Shephard,
>> Thanks, after changing the details as mentioned, Undercloud got installed
>> successfully.
>> Now as a part to test the introspection we added a single node and
>> initiated the introspection on which we are getting errors.
>> IP as per the inspector range is getting allocated, but soon after the IP
>> allocation the introspection ILO gives the below error:
>> [image: image.png]
>> it says, Downloading NBP file....
>> PXE-E99: Unexpected network error.
>>
>> Underlcoud.conf:
>>
>> undercloud_debug = true
>> clean_nodes = true
>> cleanup = false
>> container_cli = podman
>> container_healthcheck_disabled = true
>> container_images_file = /home/stack/containers-prepare-parameter.yaml
>> deployment_user = stack
>> enable_heat = true
>> enable_ironic = true
>> enable_ironic_inspector = true
>> enable_neutron = true
>> generate_service_certificate = false
>> enable_routed_networks = false
>> ipv6_address_mode = dhcpv6-stateful
>> ipxe_enabled = true
>> ironic_default_network_interface = neutron
>> ironic_enabled_network_interfaces = neutron,flat
>> local_interface = enp8s0
>> local_ip = aaaa:aaaa:aaaa::1/64
>> subnets = ctlplane-subnet
>> undercloud_admin_host = aaaa:aaaa:aaaa::1
>> undercloud_public_host = aaaa:aaaa:aaaa::1
>> undercloud_hostname = undercloud.com
>> undercloud_ntp_servers = 30.30.30.3
>> undercloud_timezone = UTC
>> [ctlplane-subnet]
>> cidr = aaaa:aaaa:aaaa::/64
>> dhcp_end = aaaa:aaaa:aaaa::19
>> dhcp_start = aaaa:aaaa:aaaa::5
>> gateway = aaaa:aaaa:aaaa::1
>> inspection_iprange = aaaa:aaaa:aaaa::20,aaaa:aaaa:aaaa::40
>>
>>
>> the ironic config in the container:
>>
>> [root at undercloud /]# vi /etc/ironic-inspector/dnsmasq.conf
>> port=0
>> interface=br-ctlplane
>>
>>
>> dhcp-range=set:ctlplane-subnet,aaaa:aaaa:aaaa::20,aaaa:aaaa:aaaa::40,64,10m
>> dhcp-option-force=tag:ctlplane-subnet,option:mtu,1500
>> dhcp-sequential-ip
>> dhcp-match=ipxe,175
>> dhcp-match=set:efi,option:client-arch,7
>> dhcp-match=set:efi,option:client-arch,9
>> dhcp-match=set:efi,option:client-arch,11
>> # dhcpv6s for Client System Architecture Type (61)
>> dhcp-match=set:efi6,option6:61,0007
>> dhcp-match=set:efi6,option6:61,0009
>> dhcp-match=set:efi6,option6:61,0011
>> dhcp-userclass=set:ipxe6,iPXE
>> # Client is already running iPXE; move to next stage of chainloading
>> dhcp-boot=tag:ipxe,http://[aaaa:aaaa:aaaa::1]:8088/inspector.ipxe
>> dhcp-option=tag:ipxe6,option6:bootfile-url,http://
>> [aaaa:aaaa:aaaa::1]:8088/inspector.ipxe
>> # Client is PXE booting over EFI without iPXE ROM; send EFI version of
>> iPXE chainloader
>> dhcp-boot=tag:efi,tag:!ipxe,snponly.efi
>>
>> dhcp-option=tag:efi6,tag:!ipxe6,option6:bootfile-url,tftp://[aaaa:aaaa:aaaa::1]/snponly.efi
>> # Client is running PXE over BIOS; send BIOS version of iPXE chainloader
>> dhcp-boot=undionly.kpxe,localhost.localdomain,aaaa:aaaa:aaaa::1
>>
>> dhcp-hostsdir=/var/lib/ironic-inspector/dhcp-hostsdir
>>
>>
>> Please check and help me with the possible error and resolution.
>>
>> Best Regards,
>> Lokendra
>>
>>
>>
>>
>> On Thu, Jun 16, 2022 at 5:15 AM Brendan Shephard <bshephar at redhat.com>
>> wrote:
>>
>>> Hey,
>>>
>>> Looks like that is the problem. The [ ] around the IP address are
>>> causing the issue. If I try to run dnsmasq using exactly the output you
>>> get, it gives me the same error:
>>> [root at tripleo-director ~]# /usr/sbin/dnsmasq --keep-in-foreground
>>> --log-facility=/var/log/ironic/dnsmasq.log --user=root
>>> --conf-file=/dev/null --listen-address=[aaaa:aaaa:aaaa::1] --port=0
>>> --enable-tftp --tftp-root=/var/lib/ironic/tftpboot
>>>
>>> dnsmasq: bad command line options: try --help
>>>
>>> VS without the [ ] I can see it starts up normally.
>>>
>>> The settings in your undercloud.conf file look to be correct I believe.
>>> So I think there might be a bug here. I don't think we should be saving
>>> that value with the square brackets, or we would need to filter them out
>>> when we gather the value in that variable.
>>>
>>> I raised a bug for it here so that we can dig into this and find what
>>> needs fixing:
>>> https://bugs.launchpad.net/tripleo/+bug/1978892
>>>
>>> In the meantime, if you edit that hieradata value, are you able to get
>>> that container started?
>>>
>>> Change this:
>>> [root at tripleo-director ~]# egrep -r 'tftp_bind_host'
>>> /etc/puppet/hieradata/
>>> /etc/puppet/hieradata/service_configs.json:
>>>  "ironic::pxe::tftp_bind_host": "%{lookup('ctlplane_uri')}",
>>>
>>> To this:
>>>  "ironic::pxe::tftp_bind_host": "aaaa:aaaa:aaaa::1"
>>>
>>> Then restart the service:
>>> sudo systemctl restart tripleo_ironic_pxe_http.service
>>> tripleo_ironic_pxe_tftp.service
>>>
>>> Does that get the container running without the error? I did the same in
>>> my environment and can see that dnsmasq is running properly like that:
>>> [root at tripleo-director ~]# ps -ef | grep aaaa
>>> root       71180   52675  0 19:24 pts/4    00:00:00 /usr/sbin/dnsmasq
>>> --keep-in-foreground --log-facility=/var/log/ironic/dnsmasq.log --user=root
>>> --conf-file=/dev/null --listen-address=aaaa:aaaa:aaaa::1 --port=0
>>> --enable-tftp --tftp-root=/var/lib/ironic/tftpboot
>>>
>>> Brendan Shephard
>>>
>>> Software Engineer
>>>
>>> Red Hat APAC <https://www.redhat.com>
>>>
>>> 193 N Quay
>>>
>>> Brisbane City QLD 4000
>>> @RedHat <https://twitter.com/redhat>   Red Hat
>>> <https://www.linkedin.com/company/red-hat>  Red Hat
>>> <https://www.facebook.com/RedHatInc>
>>> <https://red.ht/sig>
>>> <https://redhat.com/summit>
>>>
>>>
>>> On Thu, Jun 16, 2022 at 12:12 AM Lokendra Rathour <
>>> lokendrarathour at gmail.com> wrote:
>>>
>>>> Hi Shephard,
>>>> I am getting the local_ip (ipv6) of the undercloud :
>>>>
>>>> [root at undercloud stack]# sudo hiera ironic::pxe::tftp_bind_host -c
>>>> /etc/puppet/hiera.yaml
>>>> [aaaa:aaaa:aaaa::1]
>>>>
>>>> is this because of some ipv6 reasons?
>>>>
>>>>
>>>> On Wed, Jun 15, 2022 at 6:08 PM Brendan Shephard <bshephar at redhat.com>
>>>> wrote:
>>>>
>>>>> Hey,
>>>>>
>>>>> Ok, that command looks fine. What about that variable there? Do you
>>>>> get anything back when you run:
>>>>> sudo hiera ironic::pxe::tftp_bind_host -c /etc/puppet/hiera.yaml
>>>>>
>>>>> Mine returns:
>>>>> sudo hiera ironic::pxe::tftp_bind_host -c /etc/puppet/hiera.yaml
>>>>> 192.168.24.115
>>>>>
>>>>> Brendan Shephard
>>>>>
>>>>> Software Engineer
>>>>>
>>>>> Red Hat APAC <https://www.redhat.com>
>>>>>
>>>>> 193 N Quay
>>>>>
>>>>> Brisbane City QLD 4000
>>>>> @RedHat <https://twitter.com/redhat>   Red Hat
>>>>> <https://www.linkedin.com/company/red-hat>  Red Hat
>>>>> <https://www.facebook.com/RedHatInc>
>>>>> <https://red.ht/sig>
>>>>> <https://redhat.com/summit>
>>>>>
>>>>>
>>>>> On Wed, Jun 15, 2022 at 8:20 PM Lokendra Rathour <
>>>>> lokendrarathour at gmail.com> wrote:
>>>>>
>>>>>> Hi Shephard,
>>>>>>
>>>>>> this is the command from my wallaby:
>>>>>> [root at undercloud ~]# sudo cat
>>>>>> /var/lib/tripleo-config/container-startup-config/step_4/ironic_pxe_tftp.json
>>>>>> {
>>>>>>   "cap_add": [
>>>>>>     "NET_ADMIN",
>>>>>>     "NET_RAW",
>>>>>>     "SETUID"
>>>>>>   ],
>>>>>>   "command": [
>>>>>>     "/bin/bash",
>>>>>>     "-c",
>>>>>>     "BIND_HOST=$(hiera ironic::pxe::tftp_bind_host -c
>>>>>> /etc/puppet/hiera.yaml); /usr/sbin/dnsmasq --keep-in-foreground
>>>>>> --log-facility=/var/log/ironic/dnsmasq.log --user=root
>>>>>> --conf-file=/dev/null --listen-address=$BIND_HOST --port=0 --enable-tftp
>>>>>> --tftp-root=/var/lib/ironic/tftpboot"
>>>>>>   ],
>>>>>>   "environment": {
>>>>>>     "KOLLA_CONFIG_STRATEGY": "COPY_ALWAYS",
>>>>>>     "TRIPLEO_CONFIG_HASH": "9fb3e4e0e35ee35fdf74cfccb16a7543"
>>>>>>   },
>>>>>>   "healthcheck": {
>>>>>>     "test": "/openstack/healthcheck"
>>>>>>   },
>>>>>>   "image":
>>>>>> "undercloud.ctlplane.localdomain:8787/tripleowallaby/openstack-ironic-pxe:current-tripleo",
>>>>>>   "net": "host",
>>>>>>   "privileged": false,
>>>>>>   "restart": "always",
>>>>>>   "start_order": 90,
>>>>>>   "volumes": [
>>>>>>     "/etc/hosts:/etc/hosts:ro",
>>>>>>     "/etc/localtime:/etc/localtime:ro",
>>>>>>     "/etc/pki/ca-trust/extracted:/etc/pki/ca-trust/extracted:ro",
>>>>>>
>>>>>> "/etc/pki/ca-trust/source/anchors:/etc/pki/ca-trust/source/anchors:ro",
>>>>>>
>>>>>> "/etc/pki/tls/certs/ca-bundle.crt:/etc/pki/tls/certs/ca-bundle.crt:ro",
>>>>>>
>>>>>> "/etc/pki/tls/certs/ca-bundle.trust.crt:/etc/pki/tls/certs/ca-bundle.trust.crt:ro",
>>>>>>     "/etc/pki/tls/cert.pem:/etc/pki/tls/cert.pem:ro",
>>>>>>     "/dev/log:/dev/log",
>>>>>>     "/etc/puppet:/etc/puppet:ro",
>>>>>>
>>>>>> "/var/lib/kolla/config_files/ironic_pxe_tftp.json:/var/lib/kolla/config_files/config.json:ro",
>>>>>>
>>>>>> "/var/lib/config-data/puppet-generated/ironic:/var/lib/kolla/config_files/src:ro",
>>>>>>     "/var/lib/ironic:/var/lib/ironic:shared,z",
>>>>>>     "/var/log/containers/ironic:/var/log/ironic:z",
>>>>>>     "/var/log/containers/httpd/ironic-pxe:/var/log/httpd:z"
>>>>>>   ]
>>>>>> }[root at undercloud ~]#
>>>>>>
>>>>>> Comparing both, they look alike.
>>>>>> please check once.
>>>>>>
>>>>>> On Wed, Jun 15, 2022 at 3:30 PM Brendan Shephard <bshephar at redhat.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> Looks like the command was in a different file in Wallaby, can you
>>>>>>> check:
>>>>>>> sudo cat
>>>>>>> /var/lib/tripleo-config/container-startup-config/step_4/ironic_pxe_tftp.json
>>>>>>>
>>>>>>> That one should have the dnsmasq command it's trying to run. For
>>>>>>> example, here it is from my Wallaby environment:
>>>>>>> [stack at undercloud-0 ~]$ sudo cat
>>>>>>> /var/lib/tripleo-config/container-startup-config/step_4/ironic_pxe_tftp.json
>>>>>>> | jq .command
>>>>>>> [
>>>>>>>   "/bin/bash",
>>>>>>>   "-c",
>>>>>>>   "BIND_HOST=$(hiera ironic::pxe::tftp_bind_host -c
>>>>>>> /etc/puppet/hiera.yaml); /usr/sbin/dnsmasq --keep-in-foreground
>>>>>>> --log-facility=/var/log/ironic/dnsmasq.log --user=root
>>>>>>> --conf-file=/dev/null --listen-address=$BIND_HOST --port=0 --enable-tftp
>>>>>>> --tftp-root=/var/lib/ironic/tftpboot"
>>>>>>> ]
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Brendan Shephard
>>>>>>>
>>>>>>> Software Engineer
>>>>>>>
>>>>>>> Red Hat APAC <https://www.redhat.com>
>>>>>>>
>>>>>>> 193 N Quay
>>>>>>>
>>>>>>> Brisbane City QLD 4000
>>>>>>> @RedHat <https://twitter.com/redhat>   Red Hat
>>>>>>> <https://www.linkedin.com/company/red-hat>  Red Hat
>>>>>>> <https://www.facebook.com/RedHatInc>
>>>>>>> <https://red.ht/sig>
>>>>>>> <https://redhat.com/summit>
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Jun 15, 2022 at 7:19 PM Lokendra Rathour <
>>>>>>> lokendrarathour at gmail.com> wrote:
>>>>>>>
>>>>>>>> Hi Shephard,
>>>>>>>> Here is the o/p of the file:
>>>>>>>>
>>>>>>>> [root at undercloud ~]# sudo cat
>>>>>>>> /var/lib/kolla/config_files/ironic_pxe_tftp.json
>>>>>>>> {
>>>>>>>>   "config_files": [
>>>>>>>>     {
>>>>>>>>       "dest": "/",
>>>>>>>>       "merge": true,
>>>>>>>>       "preserve_properties": true,
>>>>>>>>       "source": "/var/lib/kolla/config_files/src/*"
>>>>>>>>     }
>>>>>>>>   ],
>>>>>>>>   "permissions": [
>>>>>>>>     {
>>>>>>>>       "owner": "ironic:ironic",
>>>>>>>>       "path": "/var/log/ironic",
>>>>>>>>       "recurse": true
>>>>>>>>     },
>>>>>>>>     {
>>>>>>>>       "owner": "ironic:ironic",
>>>>>>>>       "path": "/var/lib/ironic",
>>>>>>>>       "recurse": true
>>>>>>>>     }
>>>>>>>>   ]
>>>>>>>> }[root at undercloud ~]#
>>>>>>>>
>>>>>>>>
>>>>>>>> Thanks once agan.
>>>>>>>>
>>>>>>>> -Lokendra
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Jun 15, 2022 at 2:38 PM Brendan Shephard <
>>>>>>>> bshephar at redhat.com> wrote:
>>>>>>>>
>>>>>>>>> Looks like something wrong with the dnsmasq command the container
>>>>>>>>> is being launched with. What command is it trying to run?
>>>>>>>>>
>>>>>>>>> sudo cat /var/lib/kolla/config_files/ironic_pxe_tftp.json
>>>>>>>>>
>>>>>>>>> Brendan Shephard
>>>>>>>>>
>>>>>>>>> Software Engineer
>>>>>>>>>
>>>>>>>>> Red Hat APAC <https://www.redhat.com>
>>>>>>>>>
>>>>>>>>> 193 N Quay
>>>>>>>>>
>>>>>>>>> Brisbane City QLD 4000
>>>>>>>>> @RedHat <https://twitter.com/redhat>   Red Hat
>>>>>>>>> <https://www.linkedin.com/company/red-hat>  Red Hat
>>>>>>>>> <https://www.facebook.com/RedHatInc>
>>>>>>>>> <https://red.ht/sig>
>>>>>>>>> <https://redhat.com/summit>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Jun 15, 2022 at 6:22 PM Anirudh Gupta <anyrude10 at gmail.com>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> Hi Brendan,
>>>>>>>>>>
>>>>>>>>>> Thanks for your response.
>>>>>>>>>>
>>>>>>>>>> Please find the log below.
>>>>>>>>>>
>>>>>>>>>> [stack at undercloud t2u2v2w]$ sudo podman logs ironic_pxe_tftp
>>>>>>>>>>
>>>>>>>>>> dnsmasq: bad command line options: try --help
>>>>>>>>>> dnsmasq: bad command line options: try --help
>>>>>>>>>> dnsmasq: bad command line options: try --help
>>>>>>>>>> dnsmasq: bad command line options: try --help
>>>>>>>>>> dnsmasq: bad command line options: try --help
>>>>>>>>>> dnsmasq: bad command line options: try --help
>>>>>>>>>>
>>>>>>>>>> [stack at undercloud t2u2v2w]$  sudo podman ps --filter
>>>>>>>>>> name=ironic_pxe -a
>>>>>>>>>> CONTAINER ID  IMAGE
>>>>>>>>>>                                       COMMAND               CREATED
>>>>>>>>>>  STATUS                              PORTS       NAMES
>>>>>>>>>> 02dacbc74cec
>>>>>>>>>>  undercloud.ctlplane.localdomain:8787/tripleowallaby/openstack-ironic-pxe:current-tripleo
>>>>>>>>>>  /bin/bash -c BIND...  3 hours ago  Exited (1) 3 hours ago (unhealthy)
>>>>>>>>>>          ironic_pxe_tftp
>>>>>>>>>> 1f8ca39fba32
>>>>>>>>>>  undercloud.ctlplane.localdomain:8787/tripleowallaby/openstack-ironic-pxe:current-tripleo
>>>>>>>>>>  kolla_start           3 hours ago  Up 3 hours ago (healthy)
>>>>>>>>>>          ironic_pxe_http
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Regards
>>>>>>>>>>
>>>>>>>>>> Anirudh Gupta
>>>>>>>>>>
>>>>>>>>>> On Wed, Jun 15, 2022 at 11:30 AM Brendan Shephard <
>>>>>>>>>> bshephar at redhat.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hey Anirudh,
>>>>>>>>>>>
>>>>>>>>>>> You would need to look at the logs for the ironic_pxe_tftp container
>>>>>>>>>>> to see why it's failing.
>>>>>>>>>>>
>>>>>>>>>>> I assume the tftp container is not Up when you run this command?
>>>>>>>>>>> [stack at tripleo-director overcloud_playbooks]$ sudo podman ps
>>>>>>>>>>> --filter name=ironic_pxe -a
>>>>>>>>>>> CONTAINER ID  IMAGE
>>>>>>>>>>>                                           COMMAND      CREATED      STATUS
>>>>>>>>>>>                     PORTS       NAMES
>>>>>>>>>>> 0170be36e291
>>>>>>>>>>> registry.okd4.bne-shift.net:8443/tripleomastercentos9/openstack-ironic-pxe:current-tripleo
>>>>>>>>>>>  kolla_start  12 days ago  Up 30 hours ago (healthy)
>>>>>>>>>>>  ironic_pxe_tftp
>>>>>>>>>>> e507f722bdf0
>>>>>>>>>>> registry.okd4.bne-shift.net:8443/tripleomastercentos9/openstack-ironic-pxe:current-tripleo
>>>>>>>>>>>  kolla_start  12 days ago  Up 30 hours ago (healthy)
>>>>>>>>>>>  ironic_pxe_http
>>>>>>>>>>>
>>>>>>>>>>> Then check the logs to see what the error is:
>>>>>>>>>>> [stack at tripleo-director overcloud_playbooks]$ sudo podman logs
>>>>>>>>>>> ironic_pxe_tftp
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Brendan Shephard
>>>>>>>>>>>
>>>>>>>>>>> Software Engineer
>>>>>>>>>>>
>>>>>>>>>>> Red Hat APAC <https://www.redhat.com>
>>>>>>>>>>>
>>>>>>>>>>> 193 N Quay
>>>>>>>>>>>
>>>>>>>>>>> Brisbane City QLD 4000
>>>>>>>>>>> @RedHat <https://twitter.com/redhat>   Red Hat
>>>>>>>>>>> <https://www.linkedin.com/company/red-hat>  Red Hat
>>>>>>>>>>> <https://www.facebook.com/RedHatInc>
>>>>>>>>>>> <https://red.ht/sig>
>>>>>>>>>>> <https://redhat.com/summit>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Jun 15, 2022 at 7:53 AM Anirudh Gupta <
>>>>>>>>>>> anyrude10 at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi Team,
>>>>>>>>>>>>
>>>>>>>>>>>> I am trying to deploy Openstack Wallaby Undercloud on IPv6, but
>>>>>>>>>>>> facing the below error:
>>>>>>>>>>>>
>>>>>>>>>>>> 2022-06-14 05:01:23.213708 |
>>>>>>>>>>>> 52540083-cfa2-3f20-e9dc-00000000286f | TASK | Manage container systemd
>>>>>>>>>>>> services and cleanup old systemd healthchecks for
>>>>>>>>>>>> /var/lib/tripleo-config/container-startup-config/step_4
>>>>>>>>>>>> 2022-06-14 05:03:22.912816 |
>>>>>>>>>>>> 52540083-cfa2-3f20-e9dc-00000000286f | FATAL | Manage container systemd
>>>>>>>>>>>> services and cleanup old systemd healthchecks for
>>>>>>>>>>>> /var/lib/tripleo-config/container-startup-config/step_4 | undercloud |
>>>>>>>>>>>> error={"changed": false, "msg": "Service ironic_pxe_tftp has not started
>>>>>>>>>>>> yet"}
>>>>>>>>>>>> 2022-06-14 05:03:22.914400 |
>>>>>>>>>>>> 52540083-cfa2-3f20-e9dc-00000000286f | TIMING | tripleo_container_manage :
>>>>>>>>>>>> Manage container systemd
>>>>>>>>>>>>
>>>>>>>>>>>> Sample Undercloud.conf is as follows:
>>>>>>>>>>>>
>>>>>>>>>>>> [DEFAULT]
>>>>>>>>>>>> clean_nodes = true
>>>>>>>>>>>> cleanup = false
>>>>>>>>>>>> container_cli = podman
>>>>>>>>>>>> container_healthcheck_disabled = true
>>>>>>>>>>>> container_images_file =
>>>>>>>>>>>> /home/stack/containers-prepare-parameter.yaml
>>>>>>>>>>>> deployment_user = stack
>>>>>>>>>>>> enable_ironic = true
>>>>>>>>>>>> enable_ironic_inspector = true
>>>>>>>>>>>> enable_neutron = true
>>>>>>>>>>>> enable_routed_networks = false
>>>>>>>>>>>> generate_service_certificate = false
>>>>>>>>>>>> ipv6_address_mode = dhcpv6-stateful
>>>>>>>>>>>> ipxe_enabled = true
>>>>>>>>>>>> local_interface = enp8s0
>>>>>>>>>>>> local_ip = aaaa:aaaa:aaaa::1/64
>>>>>>>>>>>> subnets = ctlplane-subnet
>>>>>>>>>>>> undercloud_admin_host = aaaa:aaaa:aaaa::1
>>>>>>>>>>>> undercloud_hostname = undercloud.com
>>>>>>>>>>>> undercloud_ntp_servers = 30.30.30.3
>>>>>>>>>>>> undercloud_public_host = aaaa:aaaa:aaaa::1
>>>>>>>>>>>> undercloud_timezone = UTC
>>>>>>>>>>>>
>>>>>>>>>>>> [ctlplane-subnet]
>>>>>>>>>>>> cidr = aaaa:aaaa:aaaa::/64
>>>>>>>>>>>> dhcp_end = aaaa:aaaa:aaaa::f
>>>>>>>>>>>> dhcp_start = aaaa:aaaa:aaaa::a
>>>>>>>>>>>> gateway = aaaa:aaaa:aaaa::1
>>>>>>>>>>>> inspection_iprange = aaaa:aaaa:aaaa::3,aaaa:aaaa:aaaa::9
>>>>>>>>>>>>
>>>>>>>>>>>> Can someone please help in this regard.
>>>>>>>>>>>>
>>>>>>>>>>>> Anirudh Gupta
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> ~ Lokendra
>>>>>>>> www.inertiaspeaks.com
>>>>>>>> www.inertiagroups.com
>>>>>>>> skype: lokendrarathour
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>
>>>>>> --
>>>>>> ~ Lokendra
>>>>>> www.inertiaspeaks.com
>>>>>> www.inertiagroups.com
>>>>>> skype: lokendrarathour
>>>>>>
>>>>>>
>>>>>>
>>>>
>>>> --
>>>> ~ Lokendra
>>>> www.inertiaspeaks.com
>>>> www.inertiagroups.com
>>>> skype: lokendrarathour
>>>>
>>>>
>>>>
>>
>> --
>> ~ Lokendra
>> www.inertiaspeaks.com
>> www.inertiagroups.com
>> skype: lokendrarathour
>>
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20220616/de59835e/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 201716 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20220616/de59835e/attachment-0001.png>