Open Stack

   - What was the starting value for MTU?
   - What was the starting value changed to for MTU?
   - Can ping between all your controllers?
   - Do you just have two controllers running mariadb?
   - How did you change MTU?
   - Was the change reverted at the network level as well (switches need to
   be configured higher or at the same MTU value then the servers)

4567 seems to be the port for galera (clustering for mariadb)

On Fri, Feb 4, 2022 at 11:52 AM Franck VEDEL <
franck.vedel at univ-grenoble-alpes.fr> wrote:

> Hello,
> I am in an emergency situation, quite catastrophic situation because I do
> not know what to do.
>
> I have an Openstack cluster with 3 servers (serv1, serv2, serv3). He was
> doing so well…
>
>
> A network admin came to me and told me to change an MTU on the cards. I
> knew it shouldn't be done...I shouldn't have done it.
> I did it.
> Of course, it didn't work as expected. I went back to my starting
> configuration and there I have a big problem with mariadb which is set up
> on serv1 and serv2.
>
> Here are my errors:
>
>
> 2022-02-04 17:40:36 0 [ERROR] WSREP: failed to open gcomm backend
> connection: 110: failed to reach primary view: 110 (Connection timed out)
>  at gcomm/src/pc.cpp:connect():160
> 2022-02-04 17:40:36 0 [ERROR] WSREP:
> gcs/src/gcs_core.cpp:gcs_core_open():209: Failed to open backend
> connection: -110 (Connection timed out)
> 2022-02-04 17:40:36 0 [ERROR] WSREP: gcs/src/gcs.cpp:gcs_open():1475:
> Failed to open channel 'openstack' at '
> gcomm://10.0.5.109:4567,10.0.5.110:4567': -110 (Connection timed out)
> 2022-02-04 17:40:36 0 [ERROR] WSREP: gcs connect failed: Connection timed
> out
> 2022-02-04 17:40:36 0 [ERROR] WSREP: wsrep::connect(
> gcomm://10.0.5.109:4567,10.0.5.110:4567) failed: 7
> 2022-02-04 17:40:36 0 [ERROR] Aborting
>
>
>
>
> I do not know what to do. My installation is done with kolla-ansible,
> mariadb docker restarts every 30 seconds.
>
> Can the "kolla-ansible reconfigure mariadb" command be a solution?
> Could the command "kolla-ansible mariadb recovery" be a solution?
>
> Thanks in advance if you can help me.
>
>
>
> Franck
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20220204/914d16dd/attachment.htm>