Open Stack

You can see here that kubelet container is not started. You need to check
kubelet logs.

Can you confirm which fcos version you are using?

Ammad
On Wed, Sep 8, 2021 at 9:17 PM Karera Tony <tonykarera at gmail.com> wrote:

> Hello Team,
>
> I  tried to create another cluster with tls enabled and below are the
> results for podman ps . I have also attached the heat logs
>
>  podman ps
> CONTAINER ID  IMAGE
>      COMMAND               CREATED         STATUS             PORTS
> NAMES
> e9c028723166
> docker.io/openstackmagnum/heat-container-agent:wallaby-stable-1
>  /usr/bin/start-he...  34 minutes ago  Up 34 minutes ago
>  heat-container-agent
> 4128a9e951de  k8s.gcr.io/hyperkube:v1.18.16
>      kube-apiserver --...  30 minutes ago  Up 30 minutes ago
>  kube-apiserver
> 5430aa72e7f0  k8s.gcr.io/hyperkube:v1.18.16
>      kube-controller-m...  30 minutes ago  Up 30 minutes ago
>  kube-controller-manager
> 8f2c76272916  k8s.gcr.io/hyperkube:v1.18.16
>      kube-scheduler --...  30 minutes ago  Up 30 minutes ago
>  kube-scheduler
> af5f1a661c65  quay.io/coreos/etcd:v3.4.6
>       /usr/local/bin/et...  30 minutes ago  Up 30 minutes ago
>  etcd
>
> Regards
>
> Tony Karera
>
>
>
>
> On Wed, Sep 8, 2021 at 5:37 PM Ammad Syed <syedammad83 at gmail.com> wrote:
>
>> Hi karera,
>>
>> I don’t think your the error is related to network side. Its because
>> kublet is not installed properly in your kubernetes master node. You need
>> to check logs that why hyperkube services are not started.
>>
>> You can check it in heat logs on mater node and you can check the status
>> of kubelet container via podman ps commad.
>>
>> Ammad
>> On Wed, Sep 8, 2021 at 8:28 PM Karera Tony <tonykarera at gmail.com> wrote:
>>
>>> Hello Slawek,
>>>
>>> Unfortunately I am not sure because all I did is configure the cluster.
>>> Nothing else.
>>>
>>>
>>> Regards
>>>
>>> Tony Karera
>>>
>>>
>>>
>>>
>>> On Wed, Sep 8, 2021 at 3:31 PM Slawek Kaplonski <skaplons at redhat.com>
>>> wrote:
>>>
>>>> Hi,
>>>>
>>>> On środa, 8 września 2021 15:16:57 CEST Karera Tony wrote:
>>>> > Hello Slawek,
>>>> >
>>>> > I really need your help.
>>>> >
>>>> > I have tried all I can but still the k8s-cluster gets stuck with this
>>>> log
>>>> > here
>>>> >
>>>> > root at k8s-cluster-1-vo5s5jvtjoa7-master-0 core]# cd
>>>> > /var/log/heat-config/heat-config-script/
>>>> > [root at k8s-cluster-1-vo5s5jvtjoa7-master-0 heat-config-script]# ls
>>>> > a70c65af-34e2-4071-be18-2e4d66f85cf6-k8s-cluster-1-vo5s5jvtjoa7-
>>>> kube_cluster_c
>>>> > onfig-asfqq352zosg.log
>>>> > c42dcbf1-7812-49a2-b312-96c24225b407-k8s-cluster-1-vo5s5jvtjoa7-
>>>> kube_masters-
>>>> > waugw6vksw5p-0-vrt2gkfugedg-master_config-xv3vlmr27r46.log
>>>> > [root at k8s-cluster-1-vo5s5jvtjoa7-master-0 heat-config-script]# cat
>>>> > a70c65af-34e2-4071-be18-2e4d66f85cf6-k8s-cluster-1-vo5s5jvtjoa7-
>>>> kube_cluster_c
>>>> > onfig-asfqq352zosg.log [root at k8s-cluster-1-vo5s5jvtjoa7-master-0
>>>> > heat-config-script]# cat
>>>> > a70c65af-34e2-4071-be18-2e4d66f85cf6-k8s-cluster-1-vo5s5jvtjoa7-
>>>> kube_cluster_c
>>>> > onfig-asfqq352zosg.log [root at k8s-cluster-1-vo5s5jvtjoa7-master-0
>>>> > heat-config-script]# cat
>>>> > a70c65af-34e2-4071-be18-2e4d66f85cf6-k8s-cluster-1-vo5s5jvtjoa7-
>>>> kube_cluster_c
>>>> > onfig-asfqq352zosg.log Starting to run kube-apiserver-to-kubelet-role
>>>> > + echo 'Waiting for Kubernetes API...'
>>>> > Waiting for Kubernetes API...
>>>> > ++ kubectl get --raw=/healthz
>>>> > The connection to the server localhost:8080 was refused - did you
>>>> specify
>>>> > the right host or port?
>>>> > + '[' ok = '' ']'
>>>> > + sleep 5
>>>> > ++ kubectl get --raw=/healthz
>>>> > The connection to the server localhost:8080 was refused - did you
>>>> specify
>>>> > the right host or port?
>>>>
>>>> But why Your script is trying to connect to localhost? It's not the VM
>>>> address
>>>> I guess :)
>>>>
>>>> > + '[' ok = '' ']'
>>>> > + sleep 5
>>>> >
>>>> >
>>>> > Regards
>>>> >
>>>> > Tony Karera
>>>> >
>>>> >
>>>> >
>>>> >
>>>> > On Mon, Aug 30, 2021 at 8:50 AM Slawek Kaplonski <skaplons at redhat.com
>>>> >
>>>> >
>>>> > wrote:
>>>> > > Hi,
>>>> > >
>>>> > > You can use vlan as tenant network too. But You have to remember
>>>> that vlan
>>>> > > is
>>>> > > provider network, which means that You need to have configured
>>>> vlans on
>>>> > > Your
>>>> > > network infrastructure too. And in case of tenant network, Neutron
>>>> will
>>>> > > automatically allocate one of the vlan ids to the network as user
>>>> don't
>>>> > > have
>>>> > > possibility to choose vlan id for network (at least that's default
>>>> policy
>>>> > > in
>>>> > > Neutron).
>>>> > > So, You should check what vlan id is used by such tenant network,
>>>> check if
>>>> > > this vlan is properly confiugred on Your switches and then, if all
>>>> is
>>>> > > good,
>>>> > > check where exactly such dhcp requests are dropped (are they going
>>>> from
>>>> > > compute node? are packets comming to the node with dhcp agent?).
>>>> Base on
>>>> > > that
>>>> > > You can narrow down where the issue can be.
>>>> > >
>>>> > > On sobota, 28 sierpnia 2021 18:07:07 CEST Karera Tony wrote:
>>>> > > > How can i make them both vxlan and vlan
>>>> > > >
>>>> > > > On Sat, 28 Aug 2021, 17:43 Mohammed Naser, <mnaser at vexxhost.com>
>>>> wrote:
>>>> > > > > Your issue is that tenant_network_types should be vxlan.
>>>> > > > >
>>>> > > > > On Sat, Aug 28, 2021 at 4:29 AM Karera Tony <
>>>> tonykarera at gmail.com>
>>>> > >
>>>> > > wrote:
>>>> > > > >> Hello Team,
>>>> > > > >>
>>>> > > > >> Whenever I create an internal network  with type vlan.
>>>> > > > >>
>>>> > > > >> The Instances don't get IPs but for external Network it's fine.
>>>> > > > >>
>>>> > > > >>
>>>> > > > >> Below is the etc/kolla/config/neutron/ml2_conf.ini file
>>>> > > > >>
>>>> > > > >>
>>>> > > > >> [ml2]
>>>> > > > >> type_drivers = flat,vlan,vxlan
>>>> > > > >> tenant_network_types = vlan,flat
>>>> > > > >> mechanism_drivers = openvswitch,l2population
>>>> > > > >>
>>>> > > > >> [ml2_type_vlan]
>>>> > > > >> network_vlan_ranges = physnet1
>>>> > > > >> [ml2_type_flat]
>>>> > > > >> flat_networks = physnet1
>>>> > > > >>
>>>> > > > >> Is there something I need to change or I need to configure the
>>>> > >
>>>> > > interface
>>>> > >
>>>> > > > >> differently
>>>> > > > >> Regards
>>>> > > > >>
>>>> > > > >> Tony Karera
>>>> > > > >>
>>>> > > > >>
>>>> > > > >> --
>>>> > > > >
>>>> > > > > Mohammed Naser
>>>> > > > > VEXXHOST, Inc.
>>>> > >
>>>> > > --
>>>> > > Slawek Kaplonski
>>>> > > Principal Software Engineer
>>>> > > Red Hat
>>>>
>>>>
>>>> --
>>>> Slawek Kaplonski
>>>> Principal Software Engineer
>>>> Red Hat
>>>
>>> --
>> Regards,
>>
>>
>> Syed Ammad Ali
>>
> --
Regards,


Syed Ammad Ali
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20210908/1ac86ec5/attachment-0001.html>