Wallaby Magnum Issue
Bharat Kunwar
bharat at stackhpc.com
Wed Aug 25 20:55:19 UTC 2021
I’d check the logs under /var/log/heat-config.
Sent from my iPhone
> On 25 Aug 2021, at 19:39, Karera Tony <tonykarera at gmail.com> wrote:
>
>
> DeaR Ammad,
>
> I was able to make the communication work and the Worker nodes were created as well but the cluster failed.
>
> I logged in to the master node and there was no error but below are the error when I run systemctl status heat-container-agent on the worker noed.
>
> Aug 25 17:52:24 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
> Aug 25 17:52:55 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
> Aug 25 17:53:26 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
> Aug 25 17:53:57 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
> Aug 25 17:54:28 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
> Aug 25 17:54:59 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
> Aug 25 17:55:29 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
> Aug 25 17:56:00 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
> Aug 25 17:56:31 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
> Aug 25 17:57:02 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
> Regards
>
> Tony Karera
>
>
>
>
>> On Wed, Aug 25, 2021 at 10:38 AM Ammad Syed <syedammad83 at gmail.com> wrote:
>> Yes, keystone, Heat, Barbicane and magnum public endpoints must be reachable from master and worker nodes.
>>
>> You can use below guide for the reference as well.
>>
>> https://www.server-world.info/en/note?os=Ubuntu_20.04&p=openstack_victoria4&f=11
>>
>> Ammad
>>
>>> On Wed, Aug 25, 2021 at 12:08 PM Karera Tony <tonykarera at gmail.com> wrote:
>>> Hello Ammad,
>>>
>>> I have deployed using the given image but I think there is an issue with keystone as per the screen shot below when I checked the master node's heat-container-agent status
>>>
>>> <image.png>
>>>
>>> Regards
>>>
>>> Tony Karera
>>>
>>>
>>>
>>>
>>>> On Wed, Aug 25, 2021 at 8:28 AM Karera Tony <tonykarera at gmail.com> wrote:
>>>> Hello Ammad,
>>>>
>>>> I actually first used that one and it was also getting stuck.
>>>>
>>>> I will try this one again and update you with the Logs though.
>>>>
>>>>
>>>> Regards
>>>>
>>>> Tony Karera
>>>>
>>>>
>>>>
>>>>
>>>>> On Wed, Aug 25, 2021 at 8:25 AM Ammad Syed <syedammad83 at gmail.com> wrote:
>>>>> It seems from the logs that you are using fedora atomic. Can you try with FCOS 32 image.
>>>>>
>>>>> https://builds.coreos.fedoraproject.org/prod/streams/stable/builds/32.20201004.3.0/x86_64/fedora-coreos-32.20201004.3.0-openstack.x86_64.qcow2.xz
>>>>>
>>>>> Ammad
>>>>>
>>>>>> On Wed, Aug 25, 2021 at 11:20 AM Karera Tony <tonykarera at gmail.com> wrote:
>>>>>> Hello Sir,
>>>>>>
>>>>>> Attached is the Log file
>>>>>>
>>>>>> Regards
>>>>>>
>>>>>> Tony Karera
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> On Wed, Aug 25, 2021 at 7:31 AM Ammad Syed <syedammad83 at gmail.com> wrote:
>>>>>>> Hi Karera,
>>>>>>>
>>>>>>> Can you share us the full log file.
>>>>>>>
>>>>>>> Ammad
>>>>>>>
>>>>>>>> On Wed, Aug 25, 2021 at 9:42 AM Karera Tony <tonykarera at gmail.com> wrote:
>>>>>>>> Hello Guys,
>>>>>>>>
>>>>>>>> Thanks a lot for the help but unfortunately I dont see much information in the log file indicating a failure apart from the log that keeps appearing.
>>>>>>>>
>>>>>>>> <image.png>
>>>>>>>>
>>>>>>>>
>>>>>>>> Regards
>>>>>>>>
>>>>>>>> Tony Karera
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> On Tue, Aug 24, 2021 at 8:12 PM Mohammed Naser <mnaser at vexxhost.com> wrote:
>>>>>>>>> Also check out /var/log/cloud-init.log :)
>>>>>>>>>
>>>>>>>>> On Tue, Aug 24, 2021 at 1:39 PM Ammad Syed <syedammad83 at gmail.com> wrote:
>>>>>>>>> >
>>>>>>>>> > Then check journalctl -xe or status of heat agent service status.
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > Ammad
>>>>>>>>> > On Tue, Aug 24, 2021 at 10:36 PM Karera Tony <tonykarera at gmail.com> wrote:
>>>>>>>>> >>
>>>>>>>>> >> Hello Ammad,
>>>>>>>>> >>
>>>>>>>>> >> There is no directory or log relevant to heat in the /var/log directory
>>>>>>>>> >>
>>>>>>>>> >> Regards
>>>>>>>>> >>
>>>>>>>>> >> Tony Karera
>>>>>>>>> >>
>>>>>>>>> >>
>>>>>>>>> >>
>>>>>>>>> >>
>>>>>>>>> >> On Tue, Aug 24, 2021 at 12:43 PM Ammad Syed <syedammad83 at gmail.com> wrote:
>>>>>>>>> >>>
>>>>>>>>> >>> Hi Karera,
>>>>>>>>> >>>
>>>>>>>>> >>> Login to master node and check the logs of heat agent in var log. There must be something the cluster is stucking somewhere in creating.
>>>>>>>>> >>>
>>>>>>>>> >>> Ammad
>>>>>>>>> >>>
>>>>>>>>> >>> On Tue, Aug 24, 2021 at 3:41 PM Karera Tony <tonykarera at gmail.com> wrote:
>>>>>>>>> >>>>
>>>>>>>>> >>>> Hello Ammad,
>>>>>>>>> >>>>
>>>>>>>>> >>>> I had done as explained and it worked upto a certain point. The master node was created but the cluster remained in Creation in progress for over an hour and failed with error below
>>>>>>>>> >>>>
>>>>>>>>> >>>> Stack Faults
>>>>>>>>> >>>> as follows:
>>>>>>>>> >>>> default-master
>>>>>>>>> >>>> Timed out
>>>>>>>>> >>>> default-worker
>>>>>>>>> >>>> Timed out
>>>>>>>>> >>>>
>>>>>>>>> >>>>
>>>>>>>>> >>>> Regards
>>>>>>>>> >>>>
>>>>>>>>> >>>> Tony Karera
>>>>>>>>> >>>>
>>>>>>>>> >>>>
>>>>>>>>> >>>>
>>>>>>>>> >>>>
>>>>>>>>> >>>> On Tue, Aug 24, 2021 at 9:25 AM Ammad Syed <syedammad83 at gmail.com> wrote:
>>>>>>>>> >>>>>
>>>>>>>>> >>>>> Hi Tony,
>>>>>>>>> >>>>>
>>>>>>>>> >>>>> You can try by creating your private vxlan network prior to deployment of cluster and explicitly create your cluster in vxlan network.
>>>>>>>>> >>>>>
>>>>>>>>> >>>>> --fixed-network private --fixed-subnet private-subnet
>>>>>>>>> >>>>>
>>>>>>>>> >>>>> You can specify above while creating a cluster.
>>>>>>>>> >>>>>
>>>>>>>>> >>>>> Ammad
>>>>>>>>> >>>>>
>>>>>>>>> >>>>> On Tue, Aug 24, 2021 at 11:59 AM Karera Tony <tonykarera at gmail.com> wrote:
>>>>>>>>> >>>>>>
>>>>>>>>> >>>>>> Hello MOhamed,
>>>>>>>>> >>>>>>
>>>>>>>>> >>>>>> I think the Kubernetes cluster is ok but it when I deploy it, It creates a fixed network using vlan which I am not using for internal networks.
>>>>>>>>> >>>>>>
>>>>>>>>> >>>>>> When I create a a vxlan Network and use it in the cluster creation, It fails. Is there a trick around this ?
>>>>>>>>> >>>>>> Regards
>>>>>>>>> >>>>>>
>>>>>>>>> >>>>>> Tony Karera
>>>>>>>>> >>>>>>
>>>>>>>>> >>>>>>
>>>>>>>>> >>>>>>
>>>>>>>>> >>>>>>
>>>>>>>>> >>>>>> On Fri, Aug 20, 2021 at 9:00 AM feilong <feilong at catalyst.net.nz> wrote:
>>>>>>>>> >>>>>>>
>>>>>>>>> >>>>>>> Oooh, are you using Swarm? I don't think that driver is well maintained. I didn't see any interest in the last 4 years since I involved in the Magnum project. If there is no specific reason, I would suggest go for k8s.
>>>>>>>>> >>>>>>>
>>>>>>>>> >>>>>>>
>>>>>>>>> >>>>>>> On 20/08/21 5:08 pm, Mohammed Naser wrote:
>>>>>>>>> >>>>>>>
>>>>>>>>> >>>>>>> Please keep replies on list so others can help too.
>>>>>>>>> >>>>>>>
>>>>>>>>> >>>>>>> I don’t know how well tested the Swarm driver is at this point. I believe most Magnum users are using it for Kubernetes only.
>>>>>>>>> >>>>>>>
>>>>>>>>> >>>>>>> On Fri, Aug 20, 2021 at 1:05 AM Karera Tony <tonykarera at gmail.com> wrote:
>>>>>>>>> >>>>>>>>
>>>>>>>>> >>>>>>>> Hello Naser,
>>>>>>>>> >>>>>>>>
>>>>>>>>> >>>>>>>> Please check below.
>>>>>>>>> >>>>>>>>
>>>>>>>>> >>>>>>>> openstack coe cluster template create swarm-cluster-template1 \
>>>>>>>>> >>>>>>>> --image fedora-atomic-latest \
>>>>>>>>> >>>>>>>> --external-network External_1700\
>>>>>>>>> >>>>>>>> --dns-nameserver 8.8.8.8 \
>>>>>>>>> >>>>>>>> --master-flavor m1.small \
>>>>>>>>> >>>>>>>> --flavor m1.small \
>>>>>>>>> >>>>>>>> --coe swarm
>>>>>>>>> >>>>>>>> openstack coe cluster create swarm-cluster \
>>>>>>>>> >>>>>>>> --cluster-template swarm-cluster-template \
>>>>>>>>> >>>>>>>> --master-count 1 \
>>>>>>>>> >>>>>>>> --node-count 2 \
>>>>>>>>> >>>>>>>> --keypair Newkey
>>>>>>>>> >>>>>>>>
>>>>>>>>> >>>>>>>> Regards
>>>>>>>>> >>>>>>>>
>>>>>>>>> >>>>>>>> Tony Karera
>>>>>>>>> >>>>>>>>
>>>>>>>>> >>>>>>>>
>>>>>>>>> >>>>>>>>
>>>>>>>>> >>>>>>>>
>>>>>>>>> >>>>>>>> On Fri, Aug 20, 2021 at 7:03 AM Mohammed Naser <mnaser at vexxhost.com> wrote:
>>>>>>>>> >>>>>>>>>
>>>>>>>>> >>>>>>>>> What does your cluster template and cluster create command look like?
>>>>>>>>> >>>>>>>>>
>>>>>>>>> >>>>>>>>> On Fri, Aug 20, 2021 at 12:59 AM Karera Tony <tonykarera at gmail.com> wrote:
>>>>>>>>> >>>>>>>>>>
>>>>>>>>> >>>>>>>>>> Hello Wang,
>>>>>>>>> >>>>>>>>>>
>>>>>>>>> >>>>>>>>>> Thanks for the feedback.
>>>>>>>>> >>>>>>>>>>
>>>>>>>>> >>>>>>>>>> Unfortunately Octavia is not deployed in my environment (at least not yet) and LB is not enabled on either the cluster template or the cluster itself.
>>>>>>>>> >>>>>>>>>>
>>>>>>>>> >>>>>>>>>> Regards
>>>>>>>>> >>>>>>>>>>
>>>>>>>>> >>>>>>>>>> Tony Karera
>>>>>>>>> >>>>>>>>>>
>>>>>>>>> >>>>>>>>>>
>>>>>>>>> >>>>>>>>>>
>>>>>>>>> >>>>>>>>>>
>>>>>>>>> >>>>>>>>>> On Fri, Aug 20, 2021 at 6:52 AM feilong <feilong at catalyst.net.nz> wrote:
>>>>>>>>> >>>>>>>>>>>
>>>>>>>>> >>>>>>>>>>> Hi Karera,
>>>>>>>>> >>>>>>>>>>>
>>>>>>>>> >>>>>>>>>>> It's probably a bug. If you do have Octavia deployed, can you try to not disable the LB and see how it goes?
>>>>>>>>> >>>>>>>>>>>
>>>>>>>>> >>>>>>>>>>>
>>>>>>>>> >>>>>>>>>>> On 20/08/21 4:18 pm, Karera Tony wrote:
>>>>>>>>> >>>>>>>>>>>
>>>>>>>>> >>>>>>>>>>> Hello Team,
>>>>>>>>> >>>>>>>>>>>
>>>>>>>>> >>>>>>>>>>> I deployed Openstack Wallby on Ubuntu20 and enabled Magum, however when I create a cluster I get the error below.
>>>>>>>>> >>>>>>>>>>>
>>>>>>>>> >>>>>>>>>>> Status Reason
>>>>>>>>> >>>>>>>>>>> ERROR: Property error: : resources.api_lb.properties: : Property allowed_cidrs not assigned
>>>>>>>>> >>>>>>>>>>> Can someone advise on where I could be wrong. Btw, I disabled load balancer while creating the cluster.
>>>>>>>>> >>>>>>>>>>>
>>>>>>>>> >>>>>>>>>>> Regards
>>>>>>>>> >>>>>>>>>>>
>>>>>>>>> >>>>>>>>>>> Tony Karera
>>>>>>>>> >>>>>>>>>>>
>>>>>>>>> >>>>>>>>>>>
>>>>>>>>> >>>>>>>>>>> --
>>>>>>>>> >>>>>>>>>>> Cheers & Best regards,
>>>>>>>>> >>>>>>>>>>> ------------------------------------------------------------------------------
>>>>>>>>> >>>>>>>>>>> Feilong Wang (王飞龙) (he/him)
>>>>>>>>> >>>>>>>>>>> Head of Research & Development
>>>>>>>>> >>>>>>>>>>>
>>>>>>>>> >>>>>>>>>>> Catalyst Cloud
>>>>>>>>> >>>>>>>>>>> Aotearoa's own
>>>>>>>>> >>>>>>>>>>>
>>>>>>>>> >>>>>>>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
>>>>>>>>> >>>>>>>>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand
>>>>>>>>> >>>>>>>>>>>
>>>>>>>>> >>>>>>>>>>> CONFIDENTIALITY NOTICE: This email is intended for the named recipients only.
>>>>>>>>> >>>>>>>>>>> It may contain privileged, confidential or copyright information. If you are
>>>>>>>>> >>>>>>>>>>> not the named recipient, any use, reliance upon, disclosure or copying of this
>>>>>>>>> >>>>>>>>>>> email or its attachments is unauthorised. If you have received this email in
>>>>>>>>> >>>>>>>>>>> error, please reply via email or call +64 21 0832 6348.
>>>>>>>>> >>>>>>>>>>> ------------------------------------------------------------------------------
>>>>>>>>> >>>>>>>>>
>>>>>>>>> >>>>>>>>> --
>>>>>>>>> >>>>>>>>> Mohammed Naser
>>>>>>>>> >>>>>>>>> VEXXHOST, Inc.
>>>>>>>>> >>>>>>>
>>>>>>>>> >>>>>>> --
>>>>>>>>> >>>>>>> Mohammed Naser
>>>>>>>>> >>>>>>> VEXXHOST, Inc.
>>>>>>>>> >>>>>>>
>>>>>>>>> >>>>>>> --
>>>>>>>>> >>>>>>> Cheers & Best regards,
>>>>>>>>> >>>>>>> ------------------------------------------------------------------------------
>>>>>>>>> >>>>>>> Feilong Wang (王飞龙) (he/him)
>>>>>>>>> >>>>>>> Head of Research & Development
>>>>>>>>> >>>>>>>
>>>>>>>>> >>>>>>> Catalyst Cloud
>>>>>>>>> >>>>>>> Aotearoa's own
>>>>>>>>> >>>>>>>
>>>>>>>>> >>>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
>>>>>>>>> >>>>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand
>>>>>>>>> >>>>>>>
>>>>>>>>> >>>>>>> CONFIDENTIALITY NOTICE: This email is intended for the named recipients only.
>>>>>>>>> >>>>>>> It may contain privileged, confidential or copyright information. If you are
>>>>>>>>> >>>>>>> not the named recipient, any use, reliance upon, disclosure or copying of this
>>>>>>>>> >>>>>>> email or its attachments is unauthorised. If you have received this email in
>>>>>>>>> >>>>>>> error, please reply via email or call +64 21 0832 6348.
>>>>>>>>> >>>>>>> ------------------------------------------------------------------------------
>>>>>>>>> >>>>>
>>>>>>>>> >>>>>
>>>>>>>>> >>>>>
>>>>>>>>> >>>>> --
>>>>>>>>> >>>>> Regards,
>>>>>>>>> >>>>>
>>>>>>>>> >>>>>
>>>>>>>>> >>>>> Syed Ammad Ali
>>>>>>>>> >>>
>>>>>>>>> >>>
>>>>>>>>> >>>
>>>>>>>>> >>> --
>>>>>>>>> >>> Regards,
>>>>>>>>> >>>
>>>>>>>>> >>>
>>>>>>>>> >>> Syed Ammad Ali
>>>>>>>>> >
>>>>>>>>> > --
>>>>>>>>> > Regards,
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > Syed Ammad Ali
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Mohammed Naser
>>>>>>>>> VEXXHOST, Inc.
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Regards,
>>>>>>>
>>>>>>>
>>>>>>> Syed Ammad Ali
>>>>>
>>>>>
>>>>> --
>>>>> Regards,
>>>>>
>>>>>
>>>>> Syed Ammad Ali
>>
>>
>> --
>> Regards,
>>
>>
>> Syed Ammad Ali
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20210825/c59b1c32/attachment-0001.html>
More information about the openstack-discuss
mailing list