Open Stack

Yes, keystone, Heat, Barbicane and magnum public endpoints must be
reachable from master and worker nodes.

You can use below guide for the reference as well.

https://www.server-world.info/en/note?os=Ubuntu_20.04&p=openstack_victoria4&f=11

Ammad

On Wed, Aug 25, 2021 at 12:08 PM Karera Tony <tonykarera at gmail.com> wrote:

> Hello Ammad,
>
> I have deployed using the given image but I think there is an issue with
> keystone as per the screen shot below when I checked the master node's
> heat-container-agent status
>
> [image: image.png]
> Regards
>
> Tony Karera
>
>
>
>
> On Wed, Aug 25, 2021 at 8:28 AM Karera Tony <tonykarera at gmail.com> wrote:
>
>> Hello Ammad,
>>
>> I actually first used that one and it was also getting stuck.
>>
>> I will try this one again and update you with the Logs though.
>>
>>
>> Regards
>>
>> Tony Karera
>>
>>
>>
>>
>> On Wed, Aug 25, 2021 at 8:25 AM Ammad Syed <syedammad83 at gmail.com> wrote:
>>
>>> It seems from the logs that you are using fedora atomic. Can you try
>>> with FCOS 32 image.
>>>
>>>
>>> https://builds.coreos.fedoraproject.org/prod/streams/stable/builds/32.20201004.3.0/x86_64/fedora-coreos-32.20201004.3.0-openstack.x86_64.qcow2.xz
>>>
>>> Ammad
>>>
>>> On Wed, Aug 25, 2021 at 11:20 AM Karera Tony <tonykarera at gmail.com>
>>> wrote:
>>>
>>>> Hello Sir,
>>>>
>>>> Attached is the Log file
>>>>
>>>> Regards
>>>>
>>>> Tony Karera
>>>>
>>>>
>>>>
>>>>
>>>> On Wed, Aug 25, 2021 at 7:31 AM Ammad Syed <syedammad83 at gmail.com>
>>>> wrote:
>>>>
>>>>> Hi Karera,
>>>>>
>>>>> Can you share us the full log file.
>>>>>
>>>>> Ammad
>>>>>
>>>>> On Wed, Aug 25, 2021 at 9:42 AM Karera Tony <tonykarera at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hello Guys,
>>>>>>
>>>>>> Thanks a lot for the help but unfortunately I dont see much
>>>>>> information in the log file indicating a failure apart from the log that
>>>>>> keeps appearing.
>>>>>>
>>>>>> [image: image.png]
>>>>>>
>>>>>> Regards
>>>>>>
>>>>>> Tony Karera
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Tue, Aug 24, 2021 at 8:12 PM Mohammed Naser <mnaser at vexxhost.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Also check out /var/log/cloud-init.log :)
>>>>>>>
>>>>>>> On Tue, Aug 24, 2021 at 1:39 PM Ammad Syed <syedammad83 at gmail.com>
>>>>>>> wrote:
>>>>>>> >
>>>>>>> > Then check journalctl -xe or status of heat agent service status.
>>>>>>> >
>>>>>>> >
>>>>>>> > Ammad
>>>>>>> > On Tue, Aug 24, 2021 at 10:36 PM Karera Tony <tonykarera at gmail.com>
>>>>>>> wrote:
>>>>>>> >>
>>>>>>> >> Hello Ammad,
>>>>>>> >>
>>>>>>> >> There is no directory or log relevant to heat in the /var/log
>>>>>>> directory
>>>>>>> >>
>>>>>>> >> Regards
>>>>>>> >>
>>>>>>> >> Tony Karera
>>>>>>> >>
>>>>>>> >>
>>>>>>> >>
>>>>>>> >>
>>>>>>> >> On Tue, Aug 24, 2021 at 12:43 PM Ammad Syed <
>>>>>>> syedammad83 at gmail.com> wrote:
>>>>>>> >>>
>>>>>>> >>> Hi Karera,
>>>>>>> >>>
>>>>>>> >>> Login to master node and check the logs of heat agent in var
>>>>>>> log. There must be something the cluster is stucking somewhere in creating.
>>>>>>> >>>
>>>>>>> >>> Ammad
>>>>>>> >>>
>>>>>>> >>> On Tue, Aug 24, 2021 at 3:41 PM Karera Tony <
>>>>>>> tonykarera at gmail.com> wrote:
>>>>>>> >>>>
>>>>>>> >>>> Hello Ammad,
>>>>>>> >>>>
>>>>>>> >>>> I had done as explained and it worked upto a certain point. The
>>>>>>> master node was created but the cluster remained in Creation in progress
>>>>>>> for over an hour and failed with error below
>>>>>>> >>>>
>>>>>>> >>>> Stack Faults
>>>>>>> >>>> as follows:
>>>>>>> >>>> default-master
>>>>>>> >>>> Timed out
>>>>>>> >>>> default-worker
>>>>>>> >>>> Timed out
>>>>>>> >>>>
>>>>>>> >>>>
>>>>>>> >>>> Regards
>>>>>>> >>>>
>>>>>>> >>>> Tony Karera
>>>>>>> >>>>
>>>>>>> >>>>
>>>>>>> >>>>
>>>>>>> >>>>
>>>>>>> >>>> On Tue, Aug 24, 2021 at 9:25 AM Ammad Syed <
>>>>>>> syedammad83 at gmail.com> wrote:
>>>>>>> >>>>>
>>>>>>> >>>>> Hi Tony,
>>>>>>> >>>>>
>>>>>>> >>>>> You can try by creating your private vxlan network prior to
>>>>>>> deployment of cluster and explicitly create your cluster in vxlan network.
>>>>>>> >>>>>
>>>>>>> >>>>> --fixed-network private --fixed-subnet private-subnet
>>>>>>> >>>>>
>>>>>>> >>>>> You can specify above while creating a cluster.
>>>>>>> >>>>>
>>>>>>> >>>>> Ammad
>>>>>>> >>>>>
>>>>>>> >>>>> On Tue, Aug 24, 2021 at 11:59 AM Karera Tony <
>>>>>>> tonykarera at gmail.com> wrote:
>>>>>>> >>>>>>
>>>>>>> >>>>>> Hello MOhamed,
>>>>>>> >>>>>>
>>>>>>> >>>>>> I think the Kubernetes cluster is ok but it when I deploy it,
>>>>>>> It creates a fixed network using vlan which I am not using for internal
>>>>>>> networks.
>>>>>>> >>>>>>
>>>>>>> >>>>>> When I create a a vxlan Network and use it in the cluster
>>>>>>> creation, It fails. Is there a trick around this ?
>>>>>>> >>>>>> Regards
>>>>>>> >>>>>>
>>>>>>> >>>>>> Tony Karera
>>>>>>> >>>>>>
>>>>>>> >>>>>>
>>>>>>> >>>>>>
>>>>>>> >>>>>>
>>>>>>> >>>>>> On Fri, Aug 20, 2021 at 9:00 AM feilong <
>>>>>>> feilong at catalyst.net.nz> wrote:
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> Oooh, are you using Swarm? I don't think that driver is well
>>>>>>> maintained. I didn't see any interest in the last 4 years since I involved
>>>>>>> in the Magnum project. If there is no specific reason, I would suggest go
>>>>>>> for k8s.
>>>>>>> >>>>>>>
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> On 20/08/21 5:08 pm, Mohammed Naser wrote:
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> Please keep replies on list so others can help too.
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> I don’t know how well tested the Swarm driver is at this
>>>>>>> point. I believe most Magnum users are using it for Kubernetes only.
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> On Fri, Aug 20, 2021 at 1:05 AM Karera Tony <
>>>>>>> tonykarera at gmail.com> wrote:
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>> Hello Naser,
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>> Please check below.
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>> openstack coe cluster template create
>>>>>>> swarm-cluster-template1 \
>>>>>>> >>>>>>>>                      --image fedora-atomic-latest \
>>>>>>> >>>>>>>>                      --external-network External_1700\
>>>>>>> >>>>>>>>                      --dns-nameserver 8.8.8.8 \
>>>>>>> >>>>>>>>                      --master-flavor m1.small \
>>>>>>> >>>>>>>>                      --flavor m1.small \
>>>>>>> >>>>>>>>                      --coe swarm
>>>>>>> >>>>>>>> openstack coe cluster create swarm-cluster \
>>>>>>> >>>>>>>>                         --cluster-template
>>>>>>> swarm-cluster-template \
>>>>>>> >>>>>>>>                         --master-count 1 \
>>>>>>> >>>>>>>>                         --node-count 2 \
>>>>>>> >>>>>>>>                         --keypair Newkey
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>> Regards
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>> Tony Karera
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>> On Fri, Aug 20, 2021 at 7:03 AM Mohammed Naser <
>>>>>>> mnaser at vexxhost.com> wrote:
>>>>>>> >>>>>>>>>
>>>>>>> >>>>>>>>> What does your cluster template and cluster create command
>>>>>>> look like?
>>>>>>> >>>>>>>>>
>>>>>>> >>>>>>>>> On Fri, Aug 20, 2021 at 12:59 AM Karera Tony <
>>>>>>> tonykarera at gmail.com> wrote:
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> Hello Wang,
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> Thanks for the feedback.
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> Unfortunately Octavia is not deployed in my environment
>>>>>>> (at least not yet) and LB is not enabled on either the cluster template or
>>>>>>> the cluster itself.
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> Regards
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> Tony Karera
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> On Fri, Aug 20, 2021 at 6:52 AM feilong <
>>>>>>> feilong at catalyst.net.nz> wrote:
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>> Hi Karera,
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>> It's probably a bug. If you do have Octavia deployed,
>>>>>>> can you try to not disable the LB and see how it goes?
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>> On 20/08/21 4:18 pm, Karera Tony wrote:
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>> Hello Team,
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>> I deployed Openstack Wallby on Ubuntu20 and enabled
>>>>>>> Magum, however when I create a cluster I get the error below.
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>> Status Reason
>>>>>>> >>>>>>>>>>> ERROR: Property error: : resources.api_lb.properties: :
>>>>>>> Property allowed_cidrs not assigned
>>>>>>> >>>>>>>>>>> Can someone advise on where I could be wrong. Btw, I
>>>>>>> disabled load balancer while creating the cluster.
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>> Regards
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>> Tony Karera
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>> --
>>>>>>> >>>>>>>>>>> Cheers & Best regards,
>>>>>>> >>>>>>>>>>>
>>>>>>> ------------------------------------------------------------------------------
>>>>>>> >>>>>>>>>>> Feilong Wang (王飞龙) (he/him)
>>>>>>> >>>>>>>>>>> Head of Research & Development
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>> Catalyst Cloud
>>>>>>> >>>>>>>>>>> Aotearoa's own
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
>>>>>>> >>>>>>>>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand
>>>>>>> >>>>>>>>>>>
>>>>>>> >>>>>>>>>>> CONFIDENTIALITY NOTICE: This email is intended for the
>>>>>>> named recipients only.
>>>>>>> >>>>>>>>>>> It may contain privileged, confidential or copyright
>>>>>>> information. If you are
>>>>>>> >>>>>>>>>>> not the named recipient, any use, reliance upon,
>>>>>>> disclosure or copying of this
>>>>>>> >>>>>>>>>>> email or its attachments is unauthorised. If you have
>>>>>>> received this email in
>>>>>>> >>>>>>>>>>> error, please reply via email or call +64 21 0832 6348.
>>>>>>> >>>>>>>>>>>
>>>>>>> ------------------------------------------------------------------------------
>>>>>>> >>>>>>>>>
>>>>>>> >>>>>>>>> --
>>>>>>> >>>>>>>>> Mohammed Naser
>>>>>>> >>>>>>>>> VEXXHOST, Inc.
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> --
>>>>>>> >>>>>>> Mohammed Naser
>>>>>>> >>>>>>> VEXXHOST, Inc.
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> --
>>>>>>> >>>>>>> Cheers & Best regards,
>>>>>>> >>>>>>>
>>>>>>> ------------------------------------------------------------------------------
>>>>>>> >>>>>>> Feilong Wang (王飞龙) (he/him)
>>>>>>> >>>>>>> Head of Research & Development
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> Catalyst Cloud
>>>>>>> >>>>>>> Aotearoa's own
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
>>>>>>> >>>>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> CONFIDENTIALITY NOTICE: This email is intended for the named
>>>>>>> recipients only.
>>>>>>> >>>>>>> It may contain privileged, confidential or copyright
>>>>>>> information. If you are
>>>>>>> >>>>>>> not the named recipient, any use, reliance upon, disclosure
>>>>>>> or copying of this
>>>>>>> >>>>>>> email or its attachments is unauthorised. If you have
>>>>>>> received this email in
>>>>>>> >>>>>>> error, please reply via email or call +64 21 0832 6348.
>>>>>>> >>>>>>>
>>>>>>> ------------------------------------------------------------------------------
>>>>>>> >>>>>
>>>>>>> >>>>>
>>>>>>> >>>>>
>>>>>>> >>>>> --
>>>>>>> >>>>> Regards,
>>>>>>> >>>>>
>>>>>>> >>>>>
>>>>>>> >>>>> Syed Ammad Ali
>>>>>>> >>>
>>>>>>> >>>
>>>>>>> >>>
>>>>>>> >>> --
>>>>>>> >>> Regards,
>>>>>>> >>>
>>>>>>> >>>
>>>>>>> >>> Syed Ammad Ali
>>>>>>> >
>>>>>>> > --
>>>>>>> > Regards,
>>>>>>> >
>>>>>>> >
>>>>>>> > Syed Ammad Ali
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Mohammed Naser
>>>>>>> VEXXHOST, Inc.
>>>>>>>
>>>>>>
>>>>>
>>>>> --
>>>>> Regards,
>>>>>
>>>>>
>>>>> Syed Ammad Ali
>>>>>
>>>>
>>>
>>> --
>>> Regards,
>>>
>>>
>>> Syed Ammad Ali
>>>
>>

-- 
Regards,


Syed Ammad Ali
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20210825/c582cad6/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 75170 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20210825/c582cad6/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 45483 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20210825/c582cad6/attachment-0003.png>