Open Stack

Hello Sir,

Attached is the Log file

Regards

Tony Karera




On Wed, Aug 25, 2021 at 7:31 AM Ammad Syed <syedammad83 at gmail.com> wrote:

> Hi Karera,
>
> Can you share us the full log file.
>
> Ammad
>
> On Wed, Aug 25, 2021 at 9:42 AM Karera Tony <tonykarera at gmail.com> wrote:
>
>> Hello Guys,
>>
>> Thanks a lot for the help but unfortunately I dont see much information
>> in the log file indicating a failure apart from the log that keeps
>> appearing.
>>
>> [image: image.png]
>>
>> Regards
>>
>> Tony Karera
>>
>>
>>
>>
>> On Tue, Aug 24, 2021 at 8:12 PM Mohammed Naser <mnaser at vexxhost.com>
>> wrote:
>>
>>> Also check out /var/log/cloud-init.log :)
>>>
>>> On Tue, Aug 24, 2021 at 1:39 PM Ammad Syed <syedammad83 at gmail.com>
>>> wrote:
>>> >
>>> > Then check journalctl -xe or status of heat agent service status.
>>> >
>>> >
>>> > Ammad
>>> > On Tue, Aug 24, 2021 at 10:36 PM Karera Tony <tonykarera at gmail.com>
>>> wrote:
>>> >>
>>> >> Hello Ammad,
>>> >>
>>> >> There is no directory or log relevant to heat in the /var/log
>>> directory
>>> >>
>>> >> Regards
>>> >>
>>> >> Tony Karera
>>> >>
>>> >>
>>> >>
>>> >>
>>> >> On Tue, Aug 24, 2021 at 12:43 PM Ammad Syed <syedammad83 at gmail.com>
>>> wrote:
>>> >>>
>>> >>> Hi Karera,
>>> >>>
>>> >>> Login to master node and check the logs of heat agent in var log.
>>> There must be something the cluster is stucking somewhere in creating.
>>> >>>
>>> >>> Ammad
>>> >>>
>>> >>> On Tue, Aug 24, 2021 at 3:41 PM Karera Tony <tonykarera at gmail.com>
>>> wrote:
>>> >>>>
>>> >>>> Hello Ammad,
>>> >>>>
>>> >>>> I had done as explained and it worked upto a certain point. The
>>> master node was created but the cluster remained in Creation in progress
>>> for over an hour and failed with error below
>>> >>>>
>>> >>>> Stack Faults
>>> >>>> as follows:
>>> >>>> default-master
>>> >>>> Timed out
>>> >>>> default-worker
>>> >>>> Timed out
>>> >>>>
>>> >>>>
>>> >>>> Regards
>>> >>>>
>>> >>>> Tony Karera
>>> >>>>
>>> >>>>
>>> >>>>
>>> >>>>
>>> >>>> On Tue, Aug 24, 2021 at 9:25 AM Ammad Syed <syedammad83 at gmail.com>
>>> wrote:
>>> >>>>>
>>> >>>>> Hi Tony,
>>> >>>>>
>>> >>>>> You can try by creating your private vxlan network prior to
>>> deployment of cluster and explicitly create your cluster in vxlan network.
>>> >>>>>
>>> >>>>> --fixed-network private --fixed-subnet private-subnet
>>> >>>>>
>>> >>>>> You can specify above while creating a cluster.
>>> >>>>>
>>> >>>>> Ammad
>>> >>>>>
>>> >>>>> On Tue, Aug 24, 2021 at 11:59 AM Karera Tony <tonykarera at gmail.com>
>>> wrote:
>>> >>>>>>
>>> >>>>>> Hello MOhamed,
>>> >>>>>>
>>> >>>>>> I think the Kubernetes cluster is ok but it when I deploy it, It
>>> creates a fixed network using vlan which I am not using for internal
>>> networks.
>>> >>>>>>
>>> >>>>>> When I create a a vxlan Network and use it in the cluster
>>> creation, It fails. Is there a trick around this ?
>>> >>>>>> Regards
>>> >>>>>>
>>> >>>>>> Tony Karera
>>> >>>>>>
>>> >>>>>>
>>> >>>>>>
>>> >>>>>>
>>> >>>>>> On Fri, Aug 20, 2021 at 9:00 AM feilong <feilong at catalyst.net.nz>
>>> wrote:
>>> >>>>>>>
>>> >>>>>>> Oooh, are you using Swarm? I don't think that driver is well
>>> maintained. I didn't see any interest in the last 4 years since I involved
>>> in the Magnum project. If there is no specific reason, I would suggest go
>>> for k8s.
>>> >>>>>>>
>>> >>>>>>>
>>> >>>>>>> On 20/08/21 5:08 pm, Mohammed Naser wrote:
>>> >>>>>>>
>>> >>>>>>> Please keep replies on list so others can help too.
>>> >>>>>>>
>>> >>>>>>> I don’t know how well tested the Swarm driver is at this point.
>>> I believe most Magnum users are using it for Kubernetes only.
>>> >>>>>>>
>>> >>>>>>> On Fri, Aug 20, 2021 at 1:05 AM Karera Tony <
>>> tonykarera at gmail.com> wrote:
>>> >>>>>>>>
>>> >>>>>>>> Hello Naser,
>>> >>>>>>>>
>>> >>>>>>>> Please check below.
>>> >>>>>>>>
>>> >>>>>>>> openstack coe cluster template create swarm-cluster-template1 \
>>> >>>>>>>>                      --image fedora-atomic-latest \
>>> >>>>>>>>                      --external-network External_1700\
>>> >>>>>>>>                      --dns-nameserver 8.8.8.8 \
>>> >>>>>>>>                      --master-flavor m1.small \
>>> >>>>>>>>                      --flavor m1.small \
>>> >>>>>>>>                      --coe swarm
>>> >>>>>>>> openstack coe cluster create swarm-cluster \
>>> >>>>>>>>                         --cluster-template
>>> swarm-cluster-template \
>>> >>>>>>>>                         --master-count 1 \
>>> >>>>>>>>                         --node-count 2 \
>>> >>>>>>>>                         --keypair Newkey
>>> >>>>>>>>
>>> >>>>>>>> Regards
>>> >>>>>>>>
>>> >>>>>>>> Tony Karera
>>> >>>>>>>>
>>> >>>>>>>>
>>> >>>>>>>>
>>> >>>>>>>>
>>> >>>>>>>> On Fri, Aug 20, 2021 at 7:03 AM Mohammed Naser <
>>> mnaser at vexxhost.com> wrote:
>>> >>>>>>>>>
>>> >>>>>>>>> What does your cluster template and cluster create command
>>> look like?
>>> >>>>>>>>>
>>> >>>>>>>>> On Fri, Aug 20, 2021 at 12:59 AM Karera Tony <
>>> tonykarera at gmail.com> wrote:
>>> >>>>>>>>>>
>>> >>>>>>>>>> Hello Wang,
>>> >>>>>>>>>>
>>> >>>>>>>>>> Thanks for the feedback.
>>> >>>>>>>>>>
>>> >>>>>>>>>> Unfortunately Octavia is not deployed in my environment (at
>>> least not yet) and LB is not enabled on either the cluster template or the
>>> cluster itself.
>>> >>>>>>>>>>
>>> >>>>>>>>>> Regards
>>> >>>>>>>>>>
>>> >>>>>>>>>> Tony Karera
>>> >>>>>>>>>>
>>> >>>>>>>>>>
>>> >>>>>>>>>>
>>> >>>>>>>>>>
>>> >>>>>>>>>> On Fri, Aug 20, 2021 at 6:52 AM feilong <
>>> feilong at catalyst.net.nz> wrote:
>>> >>>>>>>>>>>
>>> >>>>>>>>>>> Hi Karera,
>>> >>>>>>>>>>>
>>> >>>>>>>>>>> It's probably a bug. If you do have Octavia deployed, can
>>> you try to not disable the LB and see how it goes?
>>> >>>>>>>>>>>
>>> >>>>>>>>>>>
>>> >>>>>>>>>>> On 20/08/21 4:18 pm, Karera Tony wrote:
>>> >>>>>>>>>>>
>>> >>>>>>>>>>> Hello Team,
>>> >>>>>>>>>>>
>>> >>>>>>>>>>> I deployed Openstack Wallby on Ubuntu20 and enabled Magum,
>>> however when I create a cluster I get the error below.
>>> >>>>>>>>>>>
>>> >>>>>>>>>>> Status Reason
>>> >>>>>>>>>>> ERROR: Property error: : resources.api_lb.properties: :
>>> Property allowed_cidrs not assigned
>>> >>>>>>>>>>> Can someone advise on where I could be wrong. Btw, I
>>> disabled load balancer while creating the cluster.
>>> >>>>>>>>>>>
>>> >>>>>>>>>>> Regards
>>> >>>>>>>>>>>
>>> >>>>>>>>>>> Tony Karera
>>> >>>>>>>>>>>
>>> >>>>>>>>>>>
>>> >>>>>>>>>>> --
>>> >>>>>>>>>>> Cheers & Best regards,
>>> >>>>>>>>>>>
>>> ------------------------------------------------------------------------------
>>> >>>>>>>>>>> Feilong Wang (王飞龙) (he/him)
>>> >>>>>>>>>>> Head of Research & Development
>>> >>>>>>>>>>>
>>> >>>>>>>>>>> Catalyst Cloud
>>> >>>>>>>>>>> Aotearoa's own
>>> >>>>>>>>>>>
>>> >>>>>>>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
>>> >>>>>>>>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand
>>> >>>>>>>>>>>
>>> >>>>>>>>>>> CONFIDENTIALITY NOTICE: This email is intended for the named
>>> recipients only.
>>> >>>>>>>>>>> It may contain privileged, confidential or copyright
>>> information. If you are
>>> >>>>>>>>>>> not the named recipient, any use, reliance upon, disclosure
>>> or copying of this
>>> >>>>>>>>>>> email or its attachments is unauthorised. If you have
>>> received this email in
>>> >>>>>>>>>>> error, please reply via email or call +64 21 0832 6348.
>>> >>>>>>>>>>>
>>> ------------------------------------------------------------------------------
>>> >>>>>>>>>
>>> >>>>>>>>> --
>>> >>>>>>>>> Mohammed Naser
>>> >>>>>>>>> VEXXHOST, Inc.
>>> >>>>>>>
>>> >>>>>>> --
>>> >>>>>>> Mohammed Naser
>>> >>>>>>> VEXXHOST, Inc.
>>> >>>>>>>
>>> >>>>>>> --
>>> >>>>>>> Cheers & Best regards,
>>> >>>>>>>
>>> ------------------------------------------------------------------------------
>>> >>>>>>> Feilong Wang (王飞龙) (he/him)
>>> >>>>>>> Head of Research & Development
>>> >>>>>>>
>>> >>>>>>> Catalyst Cloud
>>> >>>>>>> Aotearoa's own
>>> >>>>>>>
>>> >>>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
>>> >>>>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand
>>> >>>>>>>
>>> >>>>>>> CONFIDENTIALITY NOTICE: This email is intended for the named
>>> recipients only.
>>> >>>>>>> It may contain privileged, confidential or copyright
>>> information. If you are
>>> >>>>>>> not the named recipient, any use, reliance upon, disclosure or
>>> copying of this
>>> >>>>>>> email or its attachments is unauthorised. If you have received
>>> this email in
>>> >>>>>>> error, please reply via email or call +64 21 0832 6348.
>>> >>>>>>>
>>> ------------------------------------------------------------------------------
>>> >>>>>
>>> >>>>>
>>> >>>>>
>>> >>>>> --
>>> >>>>> Regards,
>>> >>>>>
>>> >>>>>
>>> >>>>> Syed Ammad Ali
>>> >>>
>>> >>>
>>> >>>
>>> >>> --
>>> >>> Regards,
>>> >>>
>>> >>>
>>> >>> Syed Ammad Ali
>>> >
>>> > --
>>> > Regards,
>>> >
>>> >
>>> > Syed Ammad Ali
>>>
>>>
>>>
>>> --
>>> Mohammed Naser
>>> VEXXHOST, Inc.
>>>
>>
>
> --
> Regards,
>
>
> Syed Ammad Ali
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20210825/9efb09ef/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 75170 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20210825/9efb09ef/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cloud-init.log
Type: application/octet-stream
Size: 180110 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20210825/9efb09ef/attachment-0001.obj>