Open Stack

Then check journalctl -xe or status of heat agent service status.


Ammad
On Tue, Aug 24, 2021 at 10:36 PM Karera Tony <tonykarera at gmail.com> wrote:

> Hello Ammad,
>
> There is no directory or log relevant to heat in the /var/log directory
>
> Regards
>
> Tony Karera
>
>
>
>
> On Tue, Aug 24, 2021 at 12:43 PM Ammad Syed <syedammad83 at gmail.com> wrote:
>
>> Hi Karera,
>>
>> Login to master node and check the logs of heat agent in var log. There
>> must be something the cluster is stucking somewhere in creating.
>>
>> Ammad
>>
>> On Tue, Aug 24, 2021 at 3:41 PM Karera Tony <tonykarera at gmail.com> wrote:
>>
>>> Hello Ammad,
>>>
>>> I had done as explained and it worked upto a certain point. The master
>>> node was created but the cluster remained in Creation in progress for over
>>> an hour and failed with error below
>>>
>>> Stack Faults
>>> as follows:
>>> default-master
>>> Timed out
>>> default-worker
>>> Timed out
>>>
>>>
>>> Regards
>>>
>>> Tony Karera
>>>
>>>
>>>
>>>
>>> On Tue, Aug 24, 2021 at 9:25 AM Ammad Syed <syedammad83 at gmail.com>
>>> wrote:
>>>
>>>> Hi Tony,
>>>>
>>>> You can try by creating your private vxlan network prior to
>>>> deployment of cluster and explicitly create your cluster in vxlan network.
>>>>
>>>> --fixed-network private --fixed-subnet private-subnet
>>>>
>>>> You can specify above while creating a cluster.
>>>>
>>>> Ammad
>>>>
>>>> On Tue, Aug 24, 2021 at 11:59 AM Karera Tony <tonykarera at gmail.com>
>>>> wrote:
>>>>
>>>>> Hello MOhamed,
>>>>>
>>>>> I think the Kubernetes cluster is ok but it when I deploy it, It
>>>>> creates a fixed network using vlan which I am not using for internal
>>>>> networks.
>>>>>
>>>>> When I create a a vxlan Network and use it in the cluster creation, It
>>>>> fails. Is there a trick around this ?
>>>>> Regards
>>>>>
>>>>> Tony Karera
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Fri, Aug 20, 2021 at 9:00 AM feilong <feilong at catalyst.net.nz>
>>>>> wrote:
>>>>>
>>>>>> Oooh, are you using Swarm? I don't think that driver is well
>>>>>> maintained. I didn't see any interest in the last 4 years since I involved
>>>>>> in the Magnum project. If there is no specific reason, I would suggest go
>>>>>> for k8s.
>>>>>>
>>>>>>
>>>>>> On 20/08/21 5:08 pm, Mohammed Naser wrote:
>>>>>>
>>>>>> Please keep replies on list so others can help too.
>>>>>>
>>>>>> I don’t know how well tested the Swarm driver is at this point. I
>>>>>> believe most Magnum users are using it for Kubernetes only.
>>>>>>
>>>>>> On Fri, Aug 20, 2021 at 1:05 AM Karera Tony <tonykarera at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hello Naser,
>>>>>>>
>>>>>>> Please check below.
>>>>>>>
>>>>>>> openstack coe cluster template create swarm-cluster-template1 \
>>>>>>>                      --image fedora-atomic-latest \
>>>>>>>                      --external-network External_1700\
>>>>>>>                      --dns-nameserver 8.8.8.8 \
>>>>>>>                      --master-flavor m1.small \
>>>>>>>                      --flavor m1.small \
>>>>>>>                      --coe swarm
>>>>>>> openstack coe cluster create swarm-cluster \
>>>>>>>                         --cluster-template swarm-cluster-template \
>>>>>>>                         --master-count 1 \
>>>>>>>                         --node-count 2 \
>>>>>>>                         --keypair Newkey
>>>>>>>
>>>>>>> Regards
>>>>>>>
>>>>>>> Tony Karera
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Fri, Aug 20, 2021 at 7:03 AM Mohammed Naser <mnaser at vexxhost.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> What does your cluster template and cluster create command look
>>>>>>>> like?
>>>>>>>>
>>>>>>>> On Fri, Aug 20, 2021 at 12:59 AM Karera Tony <tonykarera at gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Hello Wang,
>>>>>>>>>
>>>>>>>>> Thanks for the feedback.
>>>>>>>>>
>>>>>>>>> Unfortunately Octavia is not deployed in my environment (at least
>>>>>>>>> not yet) and LB is not enabled on either the cluster template or the
>>>>>>>>> cluster itself.
>>>>>>>>>
>>>>>>>>> Regards
>>>>>>>>>
>>>>>>>>> Tony Karera
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Fri, Aug 20, 2021 at 6:52 AM feilong <feilong at catalyst.net.nz>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> Hi Karera,
>>>>>>>>>>
>>>>>>>>>> It's probably a bug. If you do have Octavia deployed, can you try
>>>>>>>>>> to not disable the LB and see how it goes?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On 20/08/21 4:18 pm, Karera Tony wrote:
>>>>>>>>>>
>>>>>>>>>> Hello Team,
>>>>>>>>>>
>>>>>>>>>> I deployed Openstack Wallby on Ubuntu20 and enabled Magum,
>>>>>>>>>> however when I create a cluster I get the error below.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> *Status Reason ERROR: Property error: :
>>>>>>>>>> resources.api_lb.properties: : Property allowed_cidrs not assigned*
>>>>>>>>>> Can someone advise on where I could be wrong. Btw, I disabled
>>>>>>>>>> load balancer while creating the cluster.
>>>>>>>>>>
>>>>>>>>>> Regards
>>>>>>>>>>
>>>>>>>>>> Tony Karera
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Cheers & Best regards,
>>>>>>>>>> ------------------------------------------------------------------------------
>>>>>>>>>> Feilong Wang (王飞龙) (he/him)
>>>>>>>>>> Head of Research & Development
>>>>>>>>>>
>>>>>>>>>> Catalyst Cloud
>>>>>>>>>> Aotearoa's own
>>>>>>>>>>
>>>>>>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
>>>>>>>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand <https://www.google.com/maps/search/150+Willis+Street,+Wellington+6011,+New+Zealand?entry=gmail&source=g>
>>>>>>>>>>
>>>>>>>>>> CONFIDENTIALITY NOTICE: This email is intended for the named recipients only.
>>>>>>>>>> It may contain privileged, confidential or copyright information. If you are
>>>>>>>>>> not the named recipient, any use, reliance upon, disclosure or copying of this
>>>>>>>>>> email or its attachments is unauthorised. If you have received this email in
>>>>>>>>>> error, please reply via email or call +64 21 0832 6348.
>>>>>>>>>> ------------------------------------------------------------------------------
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>> Mohammed Naser
>>>>>>>> VEXXHOST, Inc.
>>>>>>>>
>>>>>>> --
>>>>>> Mohammed Naser
>>>>>> VEXXHOST, Inc.
>>>>>>
>>>>>> --
>>>>>> Cheers & Best regards,
>>>>>> ------------------------------------------------------------------------------
>>>>>> Feilong Wang (王飞龙) (he/him)
>>>>>> Head of Research & Development
>>>>>>
>>>>>> Catalyst Cloud
>>>>>> Aotearoa's own
>>>>>>
>>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
>>>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand <https://www.google.com/maps/search/150+Willis+Street,+Wellington+6011,+New+Zealand?entry=gmail&source=g>
>>>>>>
>>>>>> CONFIDENTIALITY NOTICE: This email is intended for the named recipients only.
>>>>>> It may contain privileged, confidential or copyright information. If you are
>>>>>> not the named recipient, any use, reliance upon, disclosure or copying of this
>>>>>> email or its attachments is unauthorised. If you have received this email in
>>>>>> error, please reply via email or call +64 21 0832 6348.
>>>>>> ------------------------------------------------------------------------------
>>>>>>
>>>>>>
>>>>
>>>> --
>>>> Regards,
>>>>
>>>>
>>>> Syed Ammad Ali
>>>>
>>>
>>
>> --
>> Regards,
>>
>>
>> Syed Ammad Ali
>>
> --
Regards,


Syed Ammad Ali
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20210824/7defdfda/attachment-0001.html>