Open Stack

Hello Ammad,

There is no directory or log relevant to heat in the /var/log directory

Regards

Tony Karera




On Tue, Aug 24, 2021 at 12:43 PM Ammad Syed <syedammad83 at gmail.com> wrote:

> Hi Karera,
>
> Login to master node and check the logs of heat agent in var log. There
> must be something the cluster is stucking somewhere in creating.
>
> Ammad
>
> On Tue, Aug 24, 2021 at 3:41 PM Karera Tony <tonykarera at gmail.com> wrote:
>
>> Hello Ammad,
>>
>> I had done as explained and it worked upto a certain point. The master
>> node was created but the cluster remained in Creation in progress for over
>> an hour and failed with error below
>>
>> Stack Faults
>> as follows:
>> default-master
>> Timed out
>> default-worker
>> Timed out
>>
>>
>> Regards
>>
>> Tony Karera
>>
>>
>>
>>
>> On Tue, Aug 24, 2021 at 9:25 AM Ammad Syed <syedammad83 at gmail.com> wrote:
>>
>>> Hi Tony,
>>>
>>> You can try by creating your private vxlan network prior to
>>> deployment of cluster and explicitly create your cluster in vxlan network.
>>>
>>> --fixed-network private --fixed-subnet private-subnet
>>>
>>> You can specify above while creating a cluster.
>>>
>>> Ammad
>>>
>>> On Tue, Aug 24, 2021 at 11:59 AM Karera Tony <tonykarera at gmail.com>
>>> wrote:
>>>
>>>> Hello MOhamed,
>>>>
>>>> I think the Kubernetes cluster is ok but it when I deploy it, It
>>>> creates a fixed network using vlan which I am not using for internal
>>>> networks.
>>>>
>>>> When I create a a vxlan Network and use it in the cluster creation, It
>>>> fails. Is there a trick around this ?
>>>> Regards
>>>>
>>>> Tony Karera
>>>>
>>>>
>>>>
>>>>
>>>> On Fri, Aug 20, 2021 at 9:00 AM feilong <feilong at catalyst.net.nz>
>>>> wrote:
>>>>
>>>>> Oooh, are you using Swarm? I don't think that driver is well
>>>>> maintained. I didn't see any interest in the last 4 years since I involved
>>>>> in the Magnum project. If there is no specific reason, I would suggest go
>>>>> for k8s.
>>>>>
>>>>>
>>>>> On 20/08/21 5:08 pm, Mohammed Naser wrote:
>>>>>
>>>>> Please keep replies on list so others can help too.
>>>>>
>>>>> I don’t know how well tested the Swarm driver is at this point. I
>>>>> believe most Magnum users are using it for Kubernetes only.
>>>>>
>>>>> On Fri, Aug 20, 2021 at 1:05 AM Karera Tony <tonykarera at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hello Naser,
>>>>>>
>>>>>> Please check below.
>>>>>>
>>>>>> openstack coe cluster template create swarm-cluster-template1 \
>>>>>>                      --image fedora-atomic-latest \
>>>>>>                      --external-network External_1700\
>>>>>>                      --dns-nameserver 8.8.8.8 \
>>>>>>                      --master-flavor m1.small \
>>>>>>                      --flavor m1.small \
>>>>>>                      --coe swarm
>>>>>> openstack coe cluster create swarm-cluster \
>>>>>>                         --cluster-template swarm-cluster-template \
>>>>>>                         --master-count 1 \
>>>>>>                         --node-count 2 \
>>>>>>                         --keypair Newkey
>>>>>>
>>>>>> Regards
>>>>>>
>>>>>> Tony Karera
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Fri, Aug 20, 2021 at 7:03 AM Mohammed Naser <mnaser at vexxhost.com>
>>>>>> wrote:
>>>>>>
>>>>>>> What does your cluster template and cluster create command look like?
>>>>>>>
>>>>>>> On Fri, Aug 20, 2021 at 12:59 AM Karera Tony <tonykarera at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hello Wang,
>>>>>>>>
>>>>>>>> Thanks for the feedback.
>>>>>>>>
>>>>>>>> Unfortunately Octavia is not deployed in my environment (at least
>>>>>>>> not yet) and LB is not enabled on either the cluster template or the
>>>>>>>> cluster itself.
>>>>>>>>
>>>>>>>> Regards
>>>>>>>>
>>>>>>>> Tony Karera
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Fri, Aug 20, 2021 at 6:52 AM feilong <feilong at catalyst.net.nz>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Hi Karera,
>>>>>>>>>
>>>>>>>>> It's probably a bug. If you do have Octavia deployed, can you try
>>>>>>>>> to not disable the LB and see how it goes?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 20/08/21 4:18 pm, Karera Tony wrote:
>>>>>>>>>
>>>>>>>>> Hello Team,
>>>>>>>>>
>>>>>>>>> I deployed Openstack Wallby on Ubuntu20 and enabled Magum, however
>>>>>>>>> when I create a cluster I get the error below.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> *Status Reason ERROR: Property error: :
>>>>>>>>> resources.api_lb.properties: : Property allowed_cidrs not assigned*
>>>>>>>>> Can someone advise on where I could be wrong. Btw, I disabled load
>>>>>>>>> balancer while creating the cluster.
>>>>>>>>>
>>>>>>>>> Regards
>>>>>>>>>
>>>>>>>>> Tony Karera
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Cheers & Best regards,
>>>>>>>>> ------------------------------------------------------------------------------
>>>>>>>>> Feilong Wang (王飞龙) (he/him)
>>>>>>>>> Head of Research & Development
>>>>>>>>>
>>>>>>>>> Catalyst Cloud
>>>>>>>>> Aotearoa's own
>>>>>>>>>
>>>>>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
>>>>>>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand <https://www.google.com/maps/search/150+Willis+Street,+Wellington+6011,+New+Zealand?entry=gmail&source=g>
>>>>>>>>>
>>>>>>>>> CONFIDENTIALITY NOTICE: This email is intended for the named recipients only.
>>>>>>>>> It may contain privileged, confidential or copyright information. If you are
>>>>>>>>> not the named recipient, any use, reliance upon, disclosure or copying of this
>>>>>>>>> email or its attachments is unauthorised. If you have received this email in
>>>>>>>>> error, please reply via email or call +64 21 0832 6348.
>>>>>>>>> ------------------------------------------------------------------------------
>>>>>>>>>
>>>>>>>>> --
>>>>>>> Mohammed Naser
>>>>>>> VEXXHOST, Inc.
>>>>>>>
>>>>>> --
>>>>> Mohammed Naser
>>>>> VEXXHOST, Inc.
>>>>>
>>>>> --
>>>>> Cheers & Best regards,
>>>>> ------------------------------------------------------------------------------
>>>>> Feilong Wang (王飞龙) (he/him)
>>>>> Head of Research & Development
>>>>>
>>>>> Catalyst Cloud
>>>>> Aotearoa's own
>>>>>
>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
>>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand
>>>>>
>>>>> CONFIDENTIALITY NOTICE: This email is intended for the named recipients only.
>>>>> It may contain privileged, confidential or copyright information. If you are
>>>>> not the named recipient, any use, reliance upon, disclosure or copying of this
>>>>> email or its attachments is unauthorised. If you have received this email in
>>>>> error, please reply via email or call +64 21 0832 6348.
>>>>> ------------------------------------------------------------------------------
>>>>>
>>>>>
>>>
>>> --
>>> Regards,
>>>
>>>
>>> Syed Ammad Ali
>>>
>>
>
> --
> Regards,
>
>
> Syed Ammad Ali
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20210824/c795b0fc/attachment-0001.html>