device compatibility interface for live migration with assigned devices

Alex Williamson alex.williamson at redhat.com
Mon Sep 14 14:44:49 UTC 2020


On Mon, 14 Sep 2020 13:48:43 +0000
"Zeng, Xin" <xin.zeng at intel.com> wrote:

> On Saturday, September 12, 2020 12:52 AM
> Alex Williamson <alex.williamson at redhat.com> wrote:
> > To: Zhao, Yan Y <yan.y.zhao at intel.com>
> > Cc: Sean Mooney <smooney at redhat.com>; Cornelia Huck
> > <cohuck at redhat.com>; Daniel P.Berrangé <berrange at redhat.com>;
> > kvm at vger.kernel.org; libvir-list at redhat.com; Jason Wang
> > <jasowang at redhat.com>; qemu-devel at nongnu.org;
> > kwankhede at nvidia.com; eauger at redhat.com; Wang, Xin-ran <xin-  
> > ran.wang at intel.com>; corbet at lwn.net; openstack-  
> > discuss at lists.openstack.org; Feng, Shaohe <shaohe.feng at intel.com>; Tian,
> > Kevin <kevin.tian at intel.com>; Parav Pandit <parav at mellanox.com>; Ding,
> > Jian-feng <jian-feng.ding at intel.com>; dgilbert at redhat.com;
> > zhenyuw at linux.intel.com; Xu, Hejie <hejie.xu at intel.com>;
> > bao.yumeng at zte.com.cn; intel-gvt-dev at lists.freedesktop.org;
> > eskultet at redhat.com; Jiri Pirko <jiri at mellanox.com>; dinechin at redhat.com;
> > devel at ovirt.org
> > Subject: Re: device compatibility interface for live migration with assigned
> > devices
> > 
> > On Fri, 11 Sep 2020 08:56:00 +0800
> > Yan Zhao <yan.y.zhao at intel.com> wrote:
> >   
> > > On Thu, Sep 10, 2020 at 12:02:44PM -0600, Alex Williamson wrote:  
> > > > On Thu, 10 Sep 2020 13:50:11 +0100
> > > > Sean Mooney <smooney at redhat.com> wrote:
> > > >  
> > > > > On Thu, 2020-09-10 at 14:38 +0200, Cornelia Huck wrote:  
> > > > > > On Wed, 9 Sep 2020 10:13:09 +0800
> > > > > > Yan Zhao <yan.y.zhao at intel.com> wrote:
> > > > > >  
> > > > > > > > > still, I'd like to put it more explicitly to make ensure it's not  
> > missed:  
> > > > > > > > > the reason we want to specify compatible_type as a trait and  
> > check  
> > > > > > > > > whether target compatible_type is the superset of source
> > > > > > > > > compatible_type is for the consideration of backward  
> > compatibility.  
> > > > > > > > > e.g.
> > > > > > > > > an old generation device may have a mdev type xxx-v4-yyy,  
> > while a newer  
> > > > > > > > > generation  device may be of mdev type xxx-v5-yyy.
> > > > > > > > > with the compatible_type traits, the old generation device is still
> > > > > > > > > able to be regarded as compatible to newer generation device  
> > even their  
> > > > > > > > > mdev types are not equal.  
> > > > > > > >
> > > > > > > > If you want to support migration from v4 to v5, can't the  
> > (presumably  
> > > > > > > > newer) driver that supports v5 simply register the v4 type as well,  
> > so  
> > > > > > > > that the mdev can be created as v4? (Just like QEMU versioned  
> > machine  
> > > > > > > > types work.)  
> > > > > > >
> > > > > > > yes, it should work in some conditions.
> > > > > > > but it may not be that good in some cases when v5 and v4 in the  
> > name string  
> > > > > > > of mdev type identify hardware generation (e.g. v4 for gen8, and v5  
> > for  
> > > > > > > gen9)
> > > > > > >
> > > > > > > e.g.
> > > > > > > (1). when src mdev type is v4 and target mdev type is v5 as
> > > > > > > software does not support it initially, and v4 and v5 identify  
> > hardware  
> > > > > > > differences.  
> > > > > >
> > > > > > My first hunch here is: Don't introduce types that may be compatible
> > > > > > later. Either make them compatible, or make them distinct by design,
> > > > > > and possibly add a different, compatible type later.
> > > > > >  
> > > > > > > then after software upgrade, v5 is now compatible to v4, should the
> > > > > > > software now downgrade mdev type from v5 to v4?
> > > > > > > not sure if moving hardware generation info into a separate  
> > attribute  
> > > > > > > from mdev type name is better. e.g. remove v4, v5 in mdev type,  
> > while use  
> > > > > > > compatible_pci_ids to identify compatibility.  
> > > > > >
> > > > > > If the generations are compatible, don't mention it in the mdev type.
> > > > > > If they aren't, use distinct types, so that management software  
> > doesn't  
> > > > > > have to guess. At least that would be my naive approach here.  
> > > > > yep that is what i would prefer to see too.  
> > > > > >  
> > > > > > >
> > > > > > > (2) name string of mdev type is composed by "driver_name +  
> > type_name".  
> > > > > > > in some devices, e.g. qat, different generations of devices are  
> > binding to  
> > > > > > > drivers of different names, e.g. "qat-v4", "qat-v5".
> > > > > > > then though type_name is equal, mdev type is not equal. e.g.
> > > > > > > "qat-v4-type1", "qat-v5-type1".  
> > > > > >
> > > > > > I guess that shows a shortcoming of that "driver_name + type_name"
> > > > > > approach? Or maybe I'm just confused.  
> > > > > yes i really dont like haveing the version in the mdev-type name
> > > > > i would stongly perfger just qat-type-1 wehere qat is just there as a way  
> > of namespacing.  
> > > > > although symmetric-cryto, asymmetric-cryto and compression woudl  
> > be a better name then type-1, type-2, type-3 if  
> > > > > that is what they would end up mapping too. e.g. qat-compression or  
> > qat-aes is a much better name then type-1  
> > > > > higher layers of software are unlikely to parse the mdev names but as a  
> > human looking at them its much eaiser to  
> > > > > understand if the names are meaningful. the qat prefix i think is  
> > important however to make sure that your mdev-types  
> > > > > dont colide with other vendeors mdev types. so i woudl encurage all  
> > vendors to prefix there mdev types with etiher the  
> > > > > device name or the vendor.  
> > > >
> > > > +1 to all this, the mdev type is meant to indicate a software
> > > > compatible interface, if different hardware versions can be software
> > > > compatible, then don't make the job of finding a compatible device
> > > > harder.  The full type is a combination of the vendor driver name plus
> > > > the vendor provided type name specifically in order to provide a type
> > > > namespace per vendor driver.  That's done at the mdev core level.
> > > > Thanks,  
> > >
> > > hi Alex,
> > > got it. so do you suggest that vendors use consistent driver name over
> > > generations of devices?
> > > for qat, they create different modules for each generation. This
> > > practice is not good if they want to support migration between devices
> > > of different generations, right?
> > >
> > > and can I understand that we don't want support of migration between
> > > different mdev types even in future ?  
> > 
> > You need to balance your requirements here.  If you're creating
> > different drivers per generation, that suggests different device APIs,
> > which is a legitimate use case for different mdev types.  However if
> > you're expecting migration compatibility, that must be seamless to the
> > guest, therefore the device API must be identical.  That suggests that
> > migration between different types doesn't make much sense.  If a new
> > generation device wants to expose a new mdev type with new features or
> > device API, yet also support migration with an older mdev type, why
> > wouldn't it simply expose both the old and the new type?    
> 
> I think all of these make sense, and I am assuming it's also reasonable and 
> common that each generation of  device has a separate device driver module.
> On the other hand, please be aware that, the mdev type is consisted of the
> driver name of the mdev's parent device and the name of a mdev type which
> the device driver specifies. 
> If a new generation device driver wants to expose an old mdev type, it has to
> register  the same driver name as the old one so that the mdev type could 
> be completely same. This doesn't make sense as a) driver name usually is
> unique for a device driver module. b) If a system has both these two 
> generation devices, once one generation device driver is loaded, the other 
> is not allowed to be loaded due to the same driver name.  
> So to allow a new generation device to simply expose the old mdev type for
> compatibility like you proposed, is it possible to create the mdev type by
> another approach, e.g. device driver creates its own namespace for the
> mdev type instead of mdev's parent device driver name being used currently?

TBH, I don't think that it's reasonable or common that different
drivers are used for each generation of hardware.  Drivers typically
evolve to support new generations of hardware, often sharing
significant code between generations.  When we deal with mdev
migration, we have an opaque data stream managed by the driver, our
default assumption is therefore that the driver plays a significant
role in the composition of that data stream.  I'm not ruling out that
we should support some form of compatibility between types, but in the
described scenario it seems the development model of the vendor drivers
is not conducive to the most obvious form of compatibility checking.
Thanks,

Alex




More information about the openstack-discuss mailing list