Open Stack

I'm running on OVS

On Sat, Oct 3, 2020 at 3:56 PM pwm <pwm2012 at gmail.com> wrote:

> On all controller and compute node, run this
> ip link set eth14 up
> brctl addif br-lbaas eth14
>
> On Sat, Oct 3, 2020 at 3:10 AM Satish Patel <satish.txt at gmail.com> wrote:
>
>> Nice, how did you add eth14 to br-lbaas bridge? Are you running OVS?
>>
>> On Fri, Oct 2, 2020 at 10:17 AM pwm <pwm2012 at gmail.com> wrote:
>> >
>> > Tested on 3 nodes and 1 compute node, it is working fine by adding the
>> eth14 to the br-lbaas bridge.
>> > Satish your solution will save 1 physical interface, will try your
>> solution using VLAN later.
>> >
>> > Thanks
>> >
>> >
>> >
>> >
>> > On Thu, Oct 1, 2020 at 10:27 PM pwm <pwm2012 at gmail.com> wrote:
>> >>
>> >> ok, will try to test it on 3 nodes this weekend. I see you are using
>> the Linux bridge, thanks for sharing your solution.
>> >>
>> >>
>> >> On Tue, Sep 29, 2020 at 10:01 PM Satish Patel <satish.txt at gmail.com>
>> wrote:
>> >>>
>> >>> Perfect,
>> >>>
>> >>> Now try same way on 3 nodes and tell me how it goes?
>> >>>
>> >>> Because I was having issue in my environment to make it work so I
>> used different method which is here on my blog
>> https://satishdotpatel.github.io//openstack-ansible-octavia/
>> >>>
>> >>> Sent from my iPhone
>> >>>
>> >>> On Sep 29, 2020, at 8:27 AM, pwm <pwm2012 at gmail.com> wrote:
>> >>>
>> >>> 
>> >>> Hi,
>> >>>  I'm testing on AIO before moving to a 3 nodes controller. Haven't
>> tested on 3 nodes controller yet but I do think it will get the same issue.
>> >>>
>> >>> On Tue, Sep 29, 2020 at 3:43 AM Satish Patel <satish.txt at gmail.com>
>> wrote:
>> >>>>
>> >>>> Hi,
>> >>>>
>> >>>> I was dealing with the same issue a few weeks back so curious are you
>> >>>> having this problem on AIO or 3 node controllers?
>> >>>>
>> >>>> ~S
>> >>>>
>> >>>> On Sun, Sep 27, 2020 at 10:27 AM pwm <pwm2012 at gmail.com> wrote:
>> >>>> >
>> >>>> > Hi,
>> >>>> > I using the following setup for Octavia load balancer on OVS
>> >>>> > Ansible openstack_user_config.yml
>> >>>> >     - network:
>> >>>> >         container_bridge: "br-lbaas"
>> >>>> >         container_type: "veth"
>> >>>> >         container_interface: "eth14"
>> >>>> >         host_bind_override: "eth14"
>> >>>> >         ip_from_q: "octavia"
>> >>>> >         type: "flat"
>> >>>> >         net_name: "octavia"
>> >>>> >         group_binds:
>> >>>> >           - neutron_openvswitch_agent
>> >>>> >           - octavia-worker
>> >>>> >           - octavia-housekeeping
>> >>>> >           - octavia-health-manager
>> >>>> >
>> >>>> > user_variables.yml
>> >>>> > octavia_provider_network_name: "octavia"
>> >>>> > octavia_provider_network_type: flat
>> >>>> > octavia_neutron_management_network_name: lbaas-mgmt
>> >>>> >
>> >>>> > /etc/netplan/50-cloud-init.yaml
>> >>>> >  br-lbaas:
>> >>>> >             dhcp4: no
>> >>>> >             interfaces: [ bond10 ]
>> >>>> >             addresses: []
>> >>>> >             parameters:
>> >>>> >                 stp: false
>> >>>> >                 forward-delay: 0
>> >>>> >  bond10:
>> >>>> >             dhcp4: no
>> >>>> >             addresses: []
>> >>>> >             interfaces: [ens16]
>> >>>> >             parameters:
>> >>>> >                 mode: balance-tlb
>> >>>> >
>> >>>> > brctl show
>> >>>> > bridge name     bridge id                         STP enabled
>>  interfaces
>> >>>> > br-lbaas            8000.d60e4e80f672       no
>>   2ea34552_eth14
>> >>>> >
>>                        bond10
>> >>>> >
>> >>>> > However, I am getting the following error when creating the load
>> balance
>> >>>> > octavia.amphorae.drivers.haproxy.rest_api_driver [-] Could not
>> connect to instance. Retrying.: requests.exceptions.ConnectionError:
>> HTTPSConnectionPool(host='172.29.233.47', port=9443
>> >>>> >
>> >>>> > The Octavia api container unable to connect to the amphora
>> instance.
>> >>>> > Any missing configuration, cause I need to manually add in the
>> eth14 interface to the br-lbaas bridge in order to fix the connection issue
>> >>>> > brctl addif br-lbaas eth14
>> >>>> >
>> >>>> > Thanks
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20201003/1c1db73b/attachment-0001.html>