[tripleo] undercloud installation failed at "waiting for container to start"

Giuseppe Sannino km.giuseppesannino at gmail.com
Tue Apr 14 12:34:53 UTC 2020


Hi Ruslanas, Lucio,
thanks for your answers.
Actually, I double checked and by giving (as per the instruction) "sudo"
podman ps I can see some container running.
So the empty printout in the podman command was due to the missing "sudo".

Eventually, the procedure is only partly able to make the containers
running and stops in between.

I will also try to open a case on the RH portal.

/G

On Sun, 12 Apr 2020 at 20:26, Ruslanas Gžibovskis <ruslanas at lpic.lt> wrote:

> Also, isn't "openstack tripleo container image list" the list of overcloud
> containers? But I do not know, so might be wrong here.
>
> Is rhosp-under.ctlplane.localdomain:8787 host resolvable? And available
> over CLI?
>
>
>
>
> On Sun, 12 Apr 2020 at 15:10, Lucio Seki <lucioseki at gmail.com> wrote:
>
>> Hi Giuseppe,
>>
>> Since you're using RHOSP, you may ask for help at Red Hat Customer Portal
>> [0] as well. You should be able to access it with the same credentials you
>> used for registering your RHEL8 to install RHOSP packages.
>> Their support team usually see open issues at the Customer Portal rather
>> than this mailing list.
>>
>> Regards,
>> Lucio Seki
>>
>> [0] https://access.redhat.com/
>>
>> On Sun, Apr 12, 2020 at 4:26 AM Ruslanas Gžibovskis <ruslanas at lpic.lt>
>> wrote:
>>
>>> Hi Giuseppe,
>>>
>>> Have you tried all the commands that are described here [1]?
>>>
>>> Also, you can add: -a to podman ps command, so it will display all
>>> containers, even powered off ones.
>>>
>>>
>>>
>>> Links:
>>> [1].
>>> https://access.redhat.com/documentation/en-us/red_hat_openstack_platform/13/html-single/director_installation_and_usage/index#Configuring-Registry_Details-Local
>>>
>>>
>>> On Fri, 10 Apr 2020 at 18:53, Giuseppe Sannino <
>>> km.giuseppesannino at gmail.com> wrote:
>>>
>>>> Hi all,
>>>> need a (hopefully) small help from you.
>>>>
>>>> I'm trying to deploy Openstack on RHLE8 using TripleO.
>>>> The "openstack undercloud install" fails at this stage:
>>>>
>>>> 2020-04-10 17:43:35.554 574937 WARNING
>>>> tripleoclient.v1.tripleo_deploy.Deploy [  ] Wait for containers to start
>>>> for step 5 using paunch
>>>> ------------------------------------------------------------------------------------------------------------------------------------------------
>>>> 623.63s
>>>> 2020-04-10 17:43:35.554 574937 WARNING
>>>> tripleoclient.v1.tripleo_deploy.Deploy [  ] Wait for containers to start
>>>> for step 4 using paunch
>>>> ------------------------------------------------------------------------------------------------------------------------------------------------
>>>> 304.39s
>>>>
>>>> Images are fetched from the RedHat registry and pushed on the local
>>>> registry:
>>>>
>>>> *>> containers-prepare-parameter.yaml*
>>>>
>>>>   ContainerImageRegistryCredentials:
>>>>     registry.redhat.io:
>>>>       xxx:yyy
>>>>   ContainerImagePrepare:
>>>>   - push_destination: rhosp-under.ctlplane.localdomain:8787
>>>>
>>>>
>>>> *>> From "/var/log/tripleo-container-image-prepare.log"*
>>>> I can see images are properly pushed into local registry:
>>>> 2020-04-10 17:17:22,339 587093 INFO tripleo_common.image.image_uploader
>>>> [  ] [
>>>> registry.redhat.io/rhosp-rhel8/openstack-nova-compute-ironic:16.0-91]
>>>> Completed upload for image
>>>> 2020-04-10 17:17:22,341 586855 INFO tripleo_common.image.image_uploader
>>>> [  ] result []
>>>> 2020-04-10 17:17:22,370 586855 INFO root [  ]
>>>> ContainerClustercheckConfigImage:
>>>> rhosp-under.ctlplane.localdomain:8787/rhosp-rhel8/openstack-mariadb:16.0-101
>>>> ContainerClustercheckImage:
>>>> rhosp-under.ctlplane.localdomain:8787/rhosp-rhel8/openstack-mariadb:16.0-101
>>>> :
>>>> :
>>>> :
>>>> ContainerZaqarImage:
>>>> rhosp-under.ctlplane.localdomain:8787/rhosp-rhel8/openstack-zaqar-wsgi:16.0-91
>>>> DockerInsecureRegistryAddress:
>>>> - rhosp-under.ctlplane.localdomain:8787
>>>>
>>>>
>>>> >> From "install-undercloud.log"
>>>> I can see a smooth procedure till it gets to the "TASK [Debug output
>>>> for task: Start containers for step XX ]" phase.
>>>> Specifically, at step 5 it ends unsuccesfully.
>>>>
>>>>
>>>> *>> podman image list*
>>>> Empty
>>>>
>>>> *>> podman ps*
>>>> Empty
>>>>
>>>>
>>>> >> openstack tripleo container image list
>>>>
>>>> [stack at rhosp-under ~]$ openstack tripleo container image list
>>>>
>>>> +--------------------------------------------------------------------------------------------------------+
>>>> | Image Name
>>>>                                   |
>>>>
>>>> +--------------------------------------------------------------------------------------------------------+
>>>> |
>>>> docker://rhosp-under.ctlplane.localdomain:8787/rhosp-rhel8/openstack-zaqar-wsgi:16.0-91
>>>>                |
>>>> |
>>>> docker://rhosp-under.ctlplane.localdomain:8787/rhosp-rhel8/openstack-heat-engine:16.0-91
>>>>               |
>>>> :
>>>> :
>>>> :
>>>> |
>>>> docker://rhosp-under.ctlplane.localdomain:8787/rhosp-rhel8/openstack-cron:16.0-96
>>>>                      |
>>>> |
>>>> docker://rhosp-under.ctlplane.localdomain:8787/rhosp-rhel8/openstack-keystone:16.0-93
>>>>                  |
>>>>
>>>> +--------------------------------------------------------------------------------------------------------+
>>>>
>>>>
>>>> Any suggestion would be more than welcome
>>>>
>>>> Many thanks in advance
>>>> /Giuseppe
>>>>
>>>>
>>>
>>> --
>>> Ruslanas Gžibovskis
>>> +370 6030 7030
>>>
>>
>
> --
> Ruslanas Gžibovskis
> +370 6030 7030
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20200414/cb5ba454/attachment-0001.html>


More information about the openstack-discuss mailing list