Open Stack

Hi,
Thanks a lot for your reply, I install pacemaker/corosync, masakari-api,
maskari-engine on controller node, and I run masakari-api with this
command: masakari-api, but I dont know whether the process is running like
that or is it just hang there, here is what it shows when I run the
command, I leave it there for a while but it does not change anything :
[root at controller masakari]# masakari-api
2019-07-08 15:21:09.946 30250 INFO masakari.api.openstack [-] Loaded
extensions: ['extensions', 'notifications', 'os-hosts', 'segments',
'versions']
2019-07-08 15:21:09.955 30250 WARNING keystonemiddleware._common.config [-]
The option "__file__" in conf is not known to auth_token
2019-07-08 15:21:09.955 30250 WARNING keystonemiddleware._common.config [-]
The option "here" in conf is not known to auth_token
2019-07-08 15:21:09.960 30250 WARNING keystonemiddleware.auth_token [-]
AuthToken middleware is set with
keystone_authtoken.service_token_roles_required set to False. This is
backwards compatible but deprecated behaviour. Please set this to True.
2019-07-08 15:21:09.974 30250 INFO masakari.wsgi [-] masakari_api listening
on 127.0.0.1:15868
2019-07-08 15:21:09.975 30250 INFO oslo_service.service [-] Starting 4
workers
2019-07-08 15:21:09.984 30274 INFO masakari.masakari_api.wsgi.server [-]
(30274) wsgi starting up on http://127.0.0.1:15868
2019-07-08 15:21:09.985 30275 INFO masakari.masakari_api.wsgi.server [-]
(30275) wsgi starting up on http://127.0.0.1:15868
2019-07-08 15:21:09.992 30277 INFO masakari.masakari_api.wsgi.server [-]
(30277) wsgi starting up on http://127.0.0.1:15868
2019-07-08 15:21:09.994 30276 INFO masakari.masakari_api.wsgi.server [-]
(30276) wsgi starting up on http://127.0.0.1:15868

On Sun, Jul 7, 2019 at 7:37 PM Gaëtan Trellu <gaetan.trellu at incloudus.com>
wrote:

> Hi Vu Tan,
>
> Masakari documentation doesn't really exist... I had to figured some stuff
> by myself to make it works into Kolla project.
>
> On controller nodes you need:
>
> - pacemaker
> - corosync
> - masakari-api (openstack/masakari repository)
> - masakari- engine (openstack/masakari repository)
>
> On compute nodes you need:
>
> - pacemaker-remote (integrated to pacemaker cluster as a resource)
> - masakari- hostmonitor (openstack/masakari-monitor repository)
> - masakari-instancemonitor (openstack/masakari-monitor repository)
> - masakari-processmonitor (openstack/masakari-monitor repository)
>
> For masakari-hostmonitor, the service needs to have access to systemctl
> command (make sure you are not using sysvinit).
>
> For masakari-monitor, the masakari-monitor.conf is a bit different, you
> will have to configure the [api] section properly.
>
> RabbitMQ needs to be configured (as transport_url) on masakari-api and
> masakari-engine too.
>
> Please check this review[1], you will have masakari.conf and
> masakari-monitor.conf configuration examples.
>
> [1] https://review.opendev.org/#/c/615715
>
> Gaëtan
>
> On Jul 7, 2019 12:08 AM, Vu Tan <vungoctan252 at gmail.com> wrote:
>
>
> Vu Tan <vungoctan252 at gmail.com>
> 10:30 AM (35 minutes ago)
> to openstack-discuss
> Sorry, I resend this email because I realized that I lacked of prefix on
> this email's subject
>
>
> Hi,
>
> I would like to use Masakari and I'm having trouble finding a step by step
> or other documentation to get started with. Which part should be installed
> on controller, which is should be on compute, and what is the prerequisite
> to install masakari, I have installed corosync and pacemaker on compute and
> controller nodes, , what else do I need to do ?  step I have done so far:
> - installed corosync/pacemaker
> - install masakari on compute node on this github repo:
> https://github.com/openstack/masakari
> - add masakari in to mariadb
> here is my configuration file of masakari.conf, do you mind to take a look
> at it, if I have misconfigured anything?
>
> [DEFAULT]
> enabled_apis = masakari_api
>
> # Enable to specify listening IP other than default
> masakari_api_listen = controller
> # Enable to specify port other than default
> masakari_api_listen_port = 15868
> debug = False
> auth_strategy=keystone
>
> [wsgi]
> # The paste configuration file path
> api_paste_config = /etc/masakari/api-paste.ini
>
> [keystone_authtoken]
> www_authenticate_uri = http://controller:5000
> auth_url = http://controller:5000
> auth_type = password
> project_domain_id = default
> user_domain_id = default
> project_name = service
> username = masakari
> password = P at ssword
>
> [database]
> connection = mysql+pymysql://masakari:P@ssword@controller/masakari
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20190708/3843e67f/attachment-0001.html>