Open Stack

Hi,

I would like to exclude a couple of VFs from the neutron SR-IOV configuration...

According to documentation https://docs.openstack.org/neutron/latest/admin/config-sriov#enable-neutron-sriov-nic-agent-compute

exclude_devices = eth1:0000:07:00.2;0000:07:00.3,eth2:0000:05:00.1;0000:05:00.2

This is my configuration

[root at zeus-59 ~]# ibdev2netdev -v
0000:88:00.0 mlx5_0 (MT4117 - MT1611X10113) CX4121A - ConnectX-4 LX SFP28 fw 14.24.1000 port 1 (ACTIVE) ==> bond0 (Up)
0000:88:00.1 mlx5_1 (MT4117 - MT1611X10113) CX4121A - ConnectX-4 LX SFP28 fw 14.24.1000 port 1 (ACTIVE) ==> bond0 (Up)
0000:88:01.2 mlx5_10 (MT4118 - NA)  fw 14.24.1000 port 1 (ACTIVE) ==> enp136s1f2 (Up)
0000:88:01.3 mlx5_11 (MT4118 - NA)  fw 14.24.1000 port 1 (ACTIVE) ==> enp136s1f3 (Up)
0000:88:01.4 mlx5_12 (MT4118 - NA)  fw 14.24.1000 port 1 (ACTIVE) ==> enp136s1f4 (Up)
0000:88:01.5 mlx5_13 (MT4118 - NA)  fw 14.24.1000 port 1 (ACTIVE) ==> enp136s1f5 (Up)
0000:88:01.6 mlx5_14 (MT4118 - NA)  fw 14.24.1000 port 1 (ACTIVE) ==> enp136s1f6 (Up)
0000:88:01.7 mlx5_15 (MT4118 - NA)  fw 14.24.1000 port 1 (ACTIVE) ==> enp136s1f7 (Up)
0000:88:02.0 mlx5_16 (MT4118 - NA)  fw 14.24.1000 port 1 (ACTIVE) ==> enp136s2 (Up)
0000:88:02.1 mlx5_17 (MT4118 - NA)  fw 14.24.1000 port 1 (ACTIVE) ==> enp136s2f1 (Up)
0000:88:00.2 mlx5_2 (MT4118 - NA)  fw 14.24.1000 port 1 (ACTIVE) ==> ens2f2 (Up)
0000:88:00.3 mlx5_3 (MT4118 - NA)  fw 14.24.1000 port 1 (ACTIVE) ==> ens2f3 (Up)
0000:88:00.4 mlx5_4 (MT4118 - NA)  fw 14.24.1000 port 1 (ACTIVE) ==> ens2f4 (Up)
0000:88:00.5 mlx5_5 (MT4118 - NA)  fw 14.24.1000 port 1 (ACTIVE) ==> ens2f5 (Up)
0000:88:00.6 mlx5_6 (MT4118 - NA)  fw 14.24.1000 port 1 (ACTIVE) ==> ens2f6 (Up)
0000:88:00.7 mlx5_7 (MT4118 - NA)  fw 14.24.1000 port 1 (ACTIVE) ==> ens2f7 (Up)
0000:88:01.0 mlx5_8 (MT4118 - NA)  fw 14.24.1000 port 1 (ACTIVE) ==> enp136s1 (Up)
0000:88:01.1 mlx5_9 (MT4118 - NA)  fw 14.24.1000 port 1 (ACTIVE) ==> enp136s1f1 (Up)


ens2f2 (0000:88:00.2) and ens2f3 (0000:88:00.3) are part of bond0 which I want to assign to OVS.

I would like to do something like:
exclude_devices = <ethX>:0000:88:00.2,<ethY>0000:88:00.3

How can I find out ethX and ethY? Are they PFs?


Thank you very much

NOTICE
Please consider the environment before printing this email. This message and any attachments are intended for the addressee named and may contain legally privileged/confidential/copyright information. If you are not the intended recipient, you should not read, use, disclose, copy or distribute this communication. If you have received this message in error please notify us at once by return email and then delete both messages. We accept no liability for the distribution of viruses or similar in electronic communications. This notice should not be removed.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20190221/28836be4/attachment-0001.html>