[openstack-dev] [zun] Failed to create Container
Rania Adouni
raniaadouni at gmail.com
Wed Nov 21 01:55:18 UTC 2018
Hi Hongbin ,
thanks for your advice I did fix it with changing the kuryr-lib to 0.6.0
and my service just work fine and also with lsof -iTCP -sTCP:LISTEN -P
I can see it in the list :
*kuryr-ser 16581 root 5u IPv4 91929 0t0 TCP
localhost:23750 (LISTEN)* ------------> that is great.
+ but I have two questions :
1- How I can change the localhost to my compute address (
192.168.1.10:23750) because it is still the same error when trying to
create container " Docker internal error: 500 Server Error: Internal Server
Error ("legacy plugin: Post http://192.168.1.10:23750/Plugin.Activate: dial
tcp 192.168.1.10:23750: connect: connection refused"). ?
2- my other question is about the log of zun why I can find it under
my directory /var/log ?
Best Regards,
Rania Adouni
Le mer. 21 nov. 2018 à 02:34, Rania Adouni <raniaadouni at gmail.com> a écrit :
> Hi Hongbin,
> Yes the version of kuryr-lib is :0.8.0 , So I think I should remove it !
> I should remove only the kuryr-lib ! if you have some command they can
> help me to unisntall it , it will be nice to provide it .
>
> Best Regards,
> Rania
>
>
> Le mer. 21 nov. 2018 à 02:27, Hongbin Lu <hongbin034 at gmail.com> a écrit :
>
>> Hi Rania,
>>
>> The config option 'driver' was recently renamed, so I guess the problem
>> is the version of kuryr-lib is not right. The Pike release of Zun is
>> matched to kuryr-lib 0.6.0 so you might want to confirm the version of
>> kuryr-lib.
>>
>> $ sudo pip freeze | grep kuryr
>>
>> If the version is not right, uninstall and re-install the kuryr-lib, then
>> restart kuryr-libnetwork. Let me know if it still doesn't work.
>>
>> Best regards,
>> Hongbin
>>
>> On Tue, Nov 20, 2018 at 8:01 PM Rania Adouni <raniaadouni at gmail.com>
>> wrote:
>>
>>> hi ,
>>> Thanks for your reply and yes the problem that kuryr-libnetwork is
>>> failed to start with the error :
>>> ● kuryr-libnetwork.service - Kuryr-libnetwork - Docker network plugin
>>> for Neutron
>>> Loaded: loaded (/etc/systemd/system/kuryr-libnetwork.service;
>>> enabled; vendor preset: enabled)
>>> Active: failed (Result: exit-code) since mer. 2018-11-21 01:48:48
>>> CET; 287ms ago
>>> Process: 13974 ExecStart=/usr/local/bin/kuryr-server --config-file
>>> /etc/kuryr/kuryr.conf (code=exited, status=1/FAILURE)
>>> Main PID: 13974 (code=exited, status=1/FAILURE)
>>>
>>> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542
>>> 13974 ERROR kuryr value = self._do_get(name, group, namespace)
>>> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542
>>> 13974 ERROR kuryr File
>>> "/usr/lib/python2.7/dist-packages/oslo_config/cfg.py", line 2942, in _
>>> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542
>>> 13974 ERROR kuryr info = self._get_opt_info(name, group)
>>> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542
>>> 13974 ERROR kuryr File
>>> "/usr/lib/python2.7/dist-packages/oslo_config/cfg.py", line 3099, in _
>>> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542
>>> 13974 ERROR kuryr raise NoSuchOptError(opt_name, group)
>>> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542
>>> 13974 ERROR kuryr NoSuchOptError: no such option driver in group [binding]
>>> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542
>>> 13974 ERROR kuryr
>>> nov. 21 01:48:48 compute systemd[1]: kuryr-libnetwork.service: Main
>>> process exited, code=exited, status=1/FAILURE
>>> nov. 21 01:48:48 compute systemd[1]: kuryr-libnetwork.service: Unit
>>> entered failed state.
>>> nov. 21 01:48:48 compute systemd[1]: kuryr-libnetwork.service: Failed
>>> with result 'exit-code'.
>>>
>>>
>>> and also the command lsof -iTCP -sTCP:LISTEN -P doesn't show the kuryr
>>> service :
>>> COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
>>> dockerd 1144 root 5u IPv4 20120 0t0 TCP
>>> compute:2375 (LISTEN)
>>> sshd 1288 root 3u IPv4 19532 0t0 TCP *:22
>>> (LISTEN)
>>> sshd 1288 root 4u IPv6 19534 0t0 TCP *:22
>>> (LISTEN)
>>> dnsmasq 1961 nobody 6u IPv4 23450 0t0 TCP
>>> 192.168.122.1:53 (LISTEN)
>>> sshd 4163 adouni 9u IPv6 34950 0t0 TCP
>>> localhost:6010 (LISTEN)
>>> sshd 4163 adouni 10u IPv4 34951 0t0 TCP
>>> localhost:6010 (LISTEN)
>>> qemu-syst 4621 libvirt-qemu 18u IPv4 37121 0t0 TCP *:5900
>>> (LISTEN)
>>>
>>> !!!
>>>
>>>
>>> Le mer. 21 nov. 2018 à 01:45, Jacob Burckhardt <
>>> jburckhardt at pdvwireless.com> a écrit :
>>>
>>>> Your error message says it cannot connect to port 23750. That's the
>>>> kuryr-libnetwork default listen port. On 192.168.1.10, run:
>>>>
>>>>
>>>>
>>>> lsof -iTCP -sTCP:LISTEN -P
>>>>
>>>>
>>>>
>>>> On my compute node, it outputs:
>>>>
>>>>
>>>>
>>>> COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
>>>>
>>>> …
>>>>
>>>> kuryr-ser 1976 root 6u IPv4 30896 0t0 TCP
>>>> localhost:23750 (LISTEN)
>>>>
>>>>
>>>>
>>>> So, you can see that kuryr is listening on 23750. If lsof does not
>>>> list a process listening on 23750, then check if kuryr is up by running:
>>>>
>>>>
>>>>
>>>> systemctl status kuryr-libnetwork
>>>>
>>>>
>>>>
>>>> You can also try restarting it by running:
>>>>
>>>>
>>>>
>>>> systemctl restart kuryr-libnetwork
>>>>
>>>>
>>>>
>>>> I installed that service by following:
>>>>
>>>>
>>>>
>>>>
>>>> https://docs.openstack.org/kuryr-libnetwork/queens/install/compute-install-ubuntu.html
>>>>
>>>>
>>>>
>>>> That is the queens install guide which might help you since zun has no
>>>> install guide in pike.
>>>>
>>>>
>>>>
>>>> If you see it listening, you can try this command:
>>>>
>>>>
>>>>
>>>> telnet 192.168.1.10 23750
>>>>
>>>>
>>>>
>>>> If it fails to connect, then try:
>>>>
>>>>
>>>>
>>>> telnet localhost 23750
>>>>
>>>>
>>>>
>>>> If it works with localhost but not 192.168.1.10, then I think that
>>>> means you need to tell docker to connect to localhost instead of
>>>> 192.168.1.10.
>>>>
>>>>
>>>>
>>>> Can you get the commands at the following web page to succeed?
>>>>
>>>>
>>>>
>>>> https://docs.openstack.org/kuryr-libnetwork/queens/install/verify.html
>>>>
>>>>
>>>>
>>>> *Jacob Burckhardt*
>>>>
>>>> Senior Software Engineer
>>>>
>>>> [image: pdvWireless]
>>>>
>>>>
>>>>
>>>> *From:* Rania Adouni <raniaadouni at gmail.com>
>>>> *Sent:* Tuesday, November 20, 2018 2:02 PM
>>>> *To:* openstack-dev at lists.openstack.org
>>>> *Subject:* [openstack-dev] [zun] Failed to create Container
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Hi ,
>>>>
>>>>
>>>>
>>>> I am starting to use zun on openstack pike , and when I try to lunch
>>>> container with cirros image , I get this reason : Docker internal
>>>> error: 500 Server Error: Internal Server Error ("legacy plugin: Post
>>>> http://192.168.1.10:23750/Plugin.Activate: dial tcp 192.168.1.10:23750:
>>>> connect: connection refused").
>>>>
>>>> you can find here the log on my compute node :
>>>> https://pastebin.com/nZTiTZiV.
>>>>
>>>> some help with this will be great .
>>>>
>>>> Best Regards,
>>>>
>>>> Rania Adouni
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> __________________________________________________________________________
>>>> OpenStack Development Mailing List (not for usage questions)
>>>> Unsubscribe:
>>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>>
>>>
>>> __________________________________________________________________________
>>> OpenStack Development Mailing List (not for usage questions)
>>> Unsubscribe:
>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>
>> __________________________________________________________________________
>> OpenStack Development Mailing List (not for usage questions)
>> Unsubscribe:
>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20181121/03ab6ab6/attachment-0001.html>
-------------- next part --------------
__________________________________________________________________________
OpenStack Development Mailing List (not for usage questions)
Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
More information about the openstack-discuss
mailing list