Open Stack

Well, everything is pretty standard (I am only deploying a POC), I am
following this "documentation"[1]. I did not change much from the default
files.
[1]
https://docs.openstack.org/project-deploy-guide/kolla-ansible/queens/quickstart.html#

Globals:

> ---
> # You can use this file to override _any_ variable throughout Kolla.
> # Additional options can be found in the
> # 'kolla-ansible/ansible/group_vars/all.yml' file. Default value of all the
> # commented parameters are shown here, To override the default value
> uncomment
> # the parameter and change its value.
>
> ###############
> # Kolla options
> ###############
> # Valid options are [ COPY_ONCE, COPY_ALWAYS ]
> #config_strategy: "COPY_ALWAYS"
>
> # Valid options are ['centos', 'debian', 'oraclelinux', 'rhel', 'ubuntu']
> #kolla_base_distro: "centos"
> kolla_base_distro: "ubuntu"
>
> # Valid options are [ binary, source ]
> #kolla_install_type: "binary"
> kolla_install_type: "source"
>
> # Valid option is Docker repository tag
> #openstack_release: ""
> #openstack_release: "master"
> openstack_release: "queens"
>
> # Location of configuration overrides
> #node_custom_config: "/etc/kolla/config"
>
> # This should be a VIP, an unused IP on your network that will float
> between
> # the hosts running keepalived for high-availability. If you want to run an
> # All-In-One without haproxy and keepalived, you can set enable_haproxy to
> no
> # in "OpenStack options" section, and set this value to the IP of your
> # 'network_interface' as set in the Networking section below.
> network_interface: "enp0s8"
> kolla_internal_vip_address: "192.168.56.250"
>
> # This is the DNS name that maps to the kolla_internal_vip_address VIP. By
> # default it is the same as kolla_internal_vip_address.
> #kolla_internal_fqdn: "{{ kolla_internal_vip_address }}"
>
> # This should be a VIP, an unused IP on your network that will float
> between
> # the hosts running keepalived for high-availability. It defaults to the
> # kolla_internal_vip_address, allowing internal and external communication
> to
> # share the same address.  Specify a kolla_external_vip_address to separate
> # internal and external requests between two VIPs.
> #kolla_external_vip_address: "{{ kolla_internal_vip_address }}"
>
> # The Public address used to communicate with OpenStack as set in the
> public_url
> # for the endpoints that will be created. This DNS name should map to
> # kolla_external_vip_address.
> #kolla_external_fqdn: "{{ kolla_external_vip_address }}"
>
> ################
> # Docker options
> ################
> # Below is an example of a private repository with authentication. Note the
> # Docker registry password can also be set in the passwords.yml file.
>
> #docker_registry: "172.16.0.10:4000"
> #docker_namespace: "companyname"
> #docker_registry_username: "sam"
> #docker_registry_password: "correcthorsebatterystaple"
>
> ###################
> # Messaging options
> ###################
> # Below is an example of an separate backend that provides brokerless
> # messaging for oslo.messaging RPC communications
>
> #om_rpc_transport: "amqp"
> #om_rpc_user: "{{ qdrouterd_user }}"
> #om_rpc_password: "{{ qdrouterd_password }}"
> #om_rpc_port: "{{ qdrouterd_port }}"
> #om_rpc_group: "qdrouterd"
>
>
> ##############################
> # Neutron - Networking Options
> ##############################
> # This interface is what all your api services will be bound to by default.
> # Additionally, all vxlan/tunnel and storage network traffic will go over
> this
> # interface by default. This interface must contain an IPv4 address.
> # It is possible for hosts to have non-matching names of interfaces -
> these can
> # be set in an inventory file per host or per group or stored separately,
> see
> #     http://docs.ansible.com/ansible/intro_inventory.html
> # Yet another way to workaround the naming problem is to create a bond for
> the
> # interface on all hosts and give the bond name here. Similar strategy can
> be
> # followed for other types of interfaces.
> #network_interface: "eth0"
>
> # These can be adjusted for even more customization. The default is the
> same as
> # the 'network_interface'. These interfaces must contain an IPv4 address.
> #kolla_external_vip_interface: "{{ network_interface }}"
> #api_interface: "{{ network_interface }}"
> #storage_interface: "{{ network_interface }}"
> #cluster_interface: "{{ network_interface }}"
> #tunnel_interface: "{{ network_interface }}"
> #dns_interface: "{{ network_interface }}"
>
> # This is the raw interface given to neutron as its external network port.
> Even
> # though an IP address can exist on this interface, it will be unusable in
> most
> # configurations. It is recommended this interface not be configured with
> any IP
> # addresses for that reason.
> #neutron_external_interface: "eth1"
> neutron_external_interface: "enp0s9"
>
> # Valid options are [ openvswitch, linuxbridge, vmware_nsxv, vmware_dvs,
> opendaylight ]
> neutron_plugin_agent: "linuxbridge"
>
> # Valid options are [ internal, infoblox ]
> #neutron_ipam_driver: "internal"
>
>
> ####################
> # keepalived options
> ####################
> # Arbitrary unique number from 0..255
> #keepalived_virtual_router_id: "51"
>
>
> #############
> # TLS options
> #############
> # To provide encryption and authentication on the
> kolla_external_vip_interface,
> # TLS can be enabled.  When TLS is enabled, certificates must be provided
> to
> # allow clients to perform authentication.
> #kolla_enable_tls_external: "no"
> #kolla_external_fqdn_cert: "{{ node_config_directory
> }}/certificates/haproxy.pem"
>
>
> ##############
> # OpenDaylight
> ##############
> #enable_opendaylight_qos: "no"
> #enable_opendaylight_l3: "yes"
>
> ###################
> # OpenStack options
> ###################
> # Use these options to set the various log levels across all OpenStack
> projects
> # Valid options are [ True, False ]
> #openstack_logging_debug: "False"
>
> # Valid options are [ none, novnc, spice, rdp ]
> #nova_console: "novnc"
>
> # OpenStack services can be enabled or disabled with these options
> #enable_aodh: "no"
> #enable_barbican: "no"
> #enable_blazar: "no"
> #enable_ceilometer: "no"
> #enable_central_logging: "no"
> #enable_ceph: "no"
> #enable_ceph_mds: "no"
> #enable_ceph_rgw: "no"
> #enable_ceph_nfs: "no"
> #enable_chrony: "no"
> #enable_cinder: "yes"
> #enable_cinder_backup: "yes"
> #enable_cinder_backend_hnas_iscsi: "no"
> #enable_cinder_backend_hnas_nfs: "no"
> #enable_cinder_backend_iscsi: "no"
> #enable_cinder_backend_lvm: "no"
> #enable_cinder_backend_nfs: "yes"
> #enable_cloudkitty: "no"
> #enable_collectd: "no"
> #enable_congress: "no"
> #enable_designate: "no"
> #enable_destroy_images: "no"
> #enable_etcd: "no"
> #enable_fluentd: "yes"
> #enable_freezer: "no"
> #enable_gnocchi: "no"
> #enable_grafana: "no"
> enable_haproxy: "no"
> #enable_heat: "yes"
> #enable_horizon: "yes"
> #enable_horizon_blazar: "{{ enable_blazar | bool }}"
> #enable_horizon_cloudkitty: "{{ enable_cloudkitty | bool }}"
> #enable_horizon_designate: "{{ enable_designate | bool }}"
> #enable_horizon_freezer: "{{ enable_freezer | bool }}"
> #enable_horizon_ironic: "{{ enable_ironic | bool }}"
> #enable_horizon_karbor: "{{ enable_karbor | bool }}"
> #enable_horizon_magnum: "{{ enable_magnum | bool }}"
> #enable_horizon_manila: "{{ enable_manila | bool }}"
> #enable_horizon_mistral: "{{ enable_mistral | bool }}"
> #enable_horizon_murano: "{{ enable_murano | bool }}"
> #enable_horizon_neutron_lbaas: "{{ enable_neutron_lbaas | bool }}"
> #enable_horizon_octavia: "{{ enable_octavia | bool }}"
> #enable_horizon_sahara: "{{ enable_sahara | bool }}"
> #enable_horizon_searchlight: "{{ enable_searchlight | bool }}"
> #enable_horizon_senlin: "{{ enable_senlin | bool }}"
> #enable_horizon_solum: "{{ enable_solum | bool }}"
> #enable_horizon_tacker: "{{ enable_tacker | bool }}"
> #enable_horizon_trove: "{{ enable_trove | bool }}"
> #enable_horizon_watcher: "{{ enable_watcher | bool }}"
> #enable_horizon_zun: "{{ enable_zun | bool }}"
> #enable_hyperv: "no"
> #enable_influxdb: "no"
> #enable_ironic: "no"
> #enable_ironic_pxe_uefi: "no"
> #enable_kafka: "no"
> #enable_karbor: "no"
> #enable_kuryr: "no"
> #enable_magnum: "no"
> #enable_manila: "no"
> #enable_manila_backend_generic: "no"
> #enable_manila_backend_hnas: "no"
> #enable_manila_backend_cephfs_native: "no"
> #enable_manila_backend_cephfs_nfs: "no"
> #enable_mistral: "no"
> #enable_mongodb: "no"
> #enable_murano: "no"
> #enable_multipathd: "no"
> #enable_neutron_bgp_dragent: "no"
> #enable_neutron_dvr: "no"
> #enable_neutron_lbaas: "no"
> #enable_neutron_fwaas: "no"
> #enable_neutron_qos: "no"
> #enable_neutron_agent_ha: "no"
> enable_neutron_vpnaas: "no"
> #enable_neutron_sriov: "no"
> #enable_neutron_sfc: "no"
> #enable_nova_fake: "no"
> #enable_nova_serialconsole_proxy: "no"
> #enable_octavia: "no"
> #enable_opendaylight: "no"
> #enable_openvswitch: "{{ neutron_plugin_agent != 'linuxbridge' }}"
> #enable_ovs_dpdk: "no"
> #enable_osprofiler: "no"
> #enable_panko: "no"
> #enable_prometheus: "no"
> #enable_qdrouterd: "no"
> #enable_rally: "no"
> #enable_redis: "no"
> #enable_sahara: "no"
> #enable_searchlight: "no"
> #enable_senlin: "no"
> #enable_skydive: "no"
> #enable_solum: "no"
> #enable_swift: "no"
> #enable_telegraf: "no"
> #enable_tacker: "no"
> #enable_tempest: "no"
> #enable_trove: "no"
> #enable_trove_singletenant: "no"
> #enable_vitrage: "no"
> #enable_vmtp: "no"
> #enable_watcher: "no"
> #enable_zookeeper: "no"
> #enable_zun: "no"
>
> ##############
> # Ceph options
> ##############
> # Ceph can be setup with a caching to improve performance. To use the
> cache you
> # must provide separate disks than those for the OSDs
> #ceph_enable_cache: "no"
>
> # Set to no if using external Ceph without cephx.
> #external_ceph_cephx_enabled: "yes"
>
> # Ceph is not able to determine the size of a cache pool automatically,
> # so the configuration on the absolute size is required here, otherwise
> the flush/evict will not work.
> #ceph_target_max_bytes: ""
> #ceph_target_max_objects: ""
>
> # Valid options are [ forward, none, writeback ]
> #ceph_cache_mode: "writeback"
>
> # A requirement for using the erasure-coded pools is you must setup a
> cache tier
> # Valid options are [ erasure, replicated ]
> #ceph_pool_type: "replicated"
>
> # Integrate ceph rados object gateway with openstack keystone
> #enable_ceph_rgw_keystone: "no"
>
> # Set the pgs and pgps for pool
> # WARNING! These values are dependant on the size and shape of your
> cluster -
> # the default values are not suitable for production use. Please refer to
> the
> # Kolla Ceph documentation for more information.
> #ceph_pool_pg_num: 8
> #ceph_pool_pgp_num: 8
>
> #############################
> # Keystone - Identity Options
> #############################
>
> # Valid options are [ fernet ]
> #keystone_token_provider: 'fernet'
>
> # Interval to rotate fernet keys by (in seconds). Must be an interval of
> # 60(1 min), 120(2 min), 180(3 min), 240(4 min), 300(5 min), 360(6 min),
> # 600(10 min), 720(12 min), 900(15 min), 1200(20 min), 1800(30 min),
> # 3600(1 hour), 7200(2 hour), 10800(3 hour), 14400(4 hour), 21600(6 hour),
> # 28800(8 hour), 43200(12 hour), 86400(1 day), 604800(1 week).
> #fernet_token_expiry: 86400
>
>
> ########################
> # Glance - Image Options
> ########################
> # Configure image backend.
> #glance_backend_ceph: "no"
> #glance_backend_file: "yes"
> #glance_backend_swift: "no"
> #glance_backend_vmware: "no"
> # Configure glance upgrade option, due to this feature is experimental
> # in glance, so default value should be set to "no".
> glance_enable_rolling_upgrade: "no"
>
>
> ##################
> # Barbican options
> ##################
> # Valid options are [ simple_crypto, p11_crypto ]
> #barbican_crypto_plugin: "simple_crypto"
> #barbican_library_path: "/usr/lib/libCryptoki2_64.so"
>
> ################
> ## Panko options
> ################
> # Valid options are [ mongodb, mysql ]
> #panko_database_type: "mysql"
>
> #################
> # Gnocchi options
> #################
> # Valid options are [ file, ceph ]
> #gnocchi_backend_storage: "{{ 'ceph' if enable_ceph|bool else 'file' }}"
>
> # Valid options are [redis, '']
> #gnocchi_incoming_storage: "{{ 'redis' if enable_redis | bool else '' }}"
>
> ################################
> # Cinder - Block Storage Options
> ################################
> # Enable / disable Cinder backends
> #cinder_backend_ceph: "{{ enable_ceph }}"
> #cinder_backend_vmwarevc_vmdk: "no"
> #cinder_volume_group: "cinder-volumes"
>
> # Valid options are [ nfs, swift, ceph ]
> #cinder_backup_driver: "ceph"
> #cinder_backup_share: ""
> #cinder_backup_mount_options_nfs: ""
>
>
> ###################
> # Designate options
> ###################
> # Valid options are [ bind9 ]
> #designate_backend: "bind9"
> #designate_ns_record: "sample.openstack.org"
>
> ########################
> # Nova - Compute Options
> ########################
> #nova_backend_ceph: "{{ enable_ceph }}"
>
> # Valid options are [ qemu, kvm, vmware, xenapi ]
> #nova_compute_virt_type: "kvm"
>
> # The number of fake driver per compute node
> #num_nova_fake_per_node: 5
>
> #################
> # Hyper-V options
> #################
> # Hyper-V can be used as hypervisor
> #hyperv_username: "user"
> #hyperv_password: "password"
> #vswitch_name: "vswitch"
> # URL from which Nova Hyper-V MSI is downloaded
> #nova_msi_url: "
> https://www.cloudbase.it/downloads/HyperVNovaCompute_Beta.msi"
>
> #############################
> # Horizon - Dashboard Options
> #############################
> #horizon_backend_database: "{{ enable_murano | bool }}"
>
> #############################
> # Ironic options
> #############################
> # following value must be set when enable ironic, the value format
> # is "192.168.0.10,192.168.0.100".
> ironic_dnsmasq_dhcp_range:
>
> ######################################
> # Manila - Shared File Systems Options
> ######################################
> # HNAS backend configuration
> #hnas_ip:
> #hnas_user:
> #hnas_password:
> #hnas_evs_id:
> #hnas_evs_ip:
> #hnas_file_system_name:
>
> ################################
> # Swift - Object Storage Options
> ################################
> # Swift expects block devices to be available for storage. Two types of
> storage
> # are supported: 1 - storage device with a special partition name and
> filesystem
> # label, 2 - unpartitioned disk  with a filesystem. The label of this
> filesystem
> # is used to detect the disk which Swift will be using.
>
> # Swift support two matching modes, valid options are [ prefix, strict ]
> #swift_devices_match_mode: "strict"
>
> # This parameter defines matching pattern: if "strict" mode was selected,
> # for swift_devices_match_mode then swift_device_name should specify the
> name of
> # the special swift partition for example: "KOLLA_SWIFT_DATA", if "prefix"
> mode was
> # selected then swift_devices_name should specify a pattern which would
> match to
> # filesystems' labels prepared for swift.
> #swift_devices_name: "KOLLA_SWIFT_DATA"
>
>
> ################################################
> # Tempest - The OpenStack Integration Test Suite
> ################################################
> # following value must be set when enable tempest
> tempest_image_id:
> tempest_flavor_ref_id:
> tempest_public_network_id:
> tempest_floating_network_name:
>
> # tempest_image_alt_id: "{{ tempest_image_id }}"
> # tempest_flavor_ref_alt_id: "{{ tempest_flavor_ref_id }}"
>
> ###################################
> # VMware - OpenStack VMware support
> ###################################
> #vmware_vcenter_host_ip:
> #vmware_vcenter_host_username:
> #vmware_vcenter_host_password:
> #vmware_datastore_name:
> #vmware_vcenter_name:
> #vmware_vcenter_cluster_name:
>
> #######################################
> # XenAPI - Support XenAPI for XenServer
> #######################################
> # XenAPI driver use HIMN(Host Internal Management Network)
> # to communicate with XenServer host.
> #xenserver_himn_ip:
> #xenserver_username:
> #xenserver_connect_protocol:
>
> ############
> # Prometheus
> ############
> #enable_prometheus_haproxy_exporter: "{{ enable_haproxy | bool }}"
> #enable_prometheus_mysqld_exporter: "{{ enable_mariadb | bool }}"
> #enable_prometheus_node_exporter: "yes"
>


On Mon, May 21, 2018 at 10:49 PM, Jeffrey Zhang <zhang.lei.fly at gmail.com>
wrote:

> seems there are some issue in you inventory file.
> Could you compare your inventory file with the one in kolla-ansible code?
>
> if you are still not fix it, try to provide you globals.yml file and
> inventory file in ML.
>
> On Tue, May 22, 2018 at 6:51 AM, Rafael Weingärtner <
> rafaelweingartner at gmail.com> wrote:
>
>> Hello OpenStackers,
>> First of all, I am not sure if this is the right list to post this
>> question. Therefore, please excuse me if I am sending an e-mail to the
>> wrong place.
>>
>> So, I have been trying to use Kolla to deploy a POC environment of
>> OpenStack. However, I have not been able to do so. Right now I am getting
>> the following error:
>>
>> fatal: [localhost]: FAILED! => {"msg": "The conditional check
>>> '(neutron_l3_agent.enabled | bool and neutron_l3_agent.host_in_groups |
>>> bool) or (neutron_vpnaas_agent.enabled | bool and
>>>  neutron_vpnaas_agent.host_in_groups | bool)' failed. The error was:
>>> error while evaluating conditional ((neutron_l3_agent.enabled | bool and
>>> neutron_l3_agent.host_in_groups | bool) or
>>> (neutron_vpnaas_agent.enabled | bool and  neutron_vpnaas_agent.host_in_groups
>>> | bool)): Unable to look up a name or access an attribute in template
>>> string ({{ inventory_hostname in groups['neutron-vpnaas-agent'] }}).\nMake
>>> sure your variable name does not contain invalid characters like '-':
>>> argument of type 'StrictUndefined' is not iterable\n\nThe error appears to
>>> have been in '/usr/local/share/kolla-ansibl
>>> e/ansible/roles/neutron/tasks/config.yml': line 2, column 3, but
>>> may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe
>>> offending line appears to be:\n\n---\n- name: Setting sysctl values\n  ^
>>> here\n"}
>>>
>>
>> It looks like an Ansible problem. I checked the file
>> “/usr/local/share/kolla-ansible/ansible/roles/neutron/tasks/config.yml”
>> at line 5, it has the following declaration:
>>
>>> neutron_l3_agent: "{{ neutron_services['neutron-l3-agent'] }}"
>>>
>>
>> As far as I understand everything is ok with this variable declaration.
>> There is the “neutron-l3-agent” parameter used to retrieve an element from
>> “neutron_services” map, but that does look ok. Has anybody else experienced
>> this problem before?
>>
>> I am using Kolla for OpenStack queens. I am using kolla with the
>> following command.
>>
>>> kolla-ansible -i all-in-one bootstrap-servers && kolla-ansible -i
>>> all-in-one prechecks && kolla-ansible -i all-in-one deploy
>>>
>>
>> As you can see, it is a simple use case to deploy OpenStack in a single
>> node. The command that is failing is the following.
>>
>>> kolla-ansible -i all-in-one deploy
>>>
>>
>> --
>> Rafael Weingärtner
>>
>> ____________________________________________________________
>> ______________
>> OpenStack Development Mailing List (not for usage questions)
>> Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscrib
>> e
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>
>>
>
>
> --
> Regards,
> Jeffrey Zhang
> Blog: http://xcodest.me
>
> __________________________________________________________________________
> OpenStack Development Mailing List (not for usage questions)
> Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>
>


-- 
Rafael Weingärtner
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20180521/c69128f0/attachment.html>