[openstack-dev] [OpenStack-Dev][DevStack][Neutron] devstack install - need help on local.conf settings
nidhi.hada at wipro.com
nidhi.hada at wipro.com
Fri Jun 2 09:31:48 UTC 2017
Hello all,
I am using http://paste.openstack.org/show/595339/ as my local.conf.
I wanted to understand :- Which interface should we put as value in
PUBLIC_INTERFACE in local.conf.
Reason why I am asking this is,
Once, I installed OpenStack using DevStack, on my linux VM on
VirtualBox - I used PUBLIC_INTERFACE value as eth0
and
I configured only one network adapter on VM in NAT mode.
Later on I faced lot of networking problems in that OpenStack VM.
Internet wasn't accessible suddenly and many other probs.
I debugged and somehow found eth0 was added in
One ovs-bridge and if I remove eth0 from that bridge -
only then internet in my VM used to work well.
Then I doubted PUBLIC_INTERFACE value in local.conf
is something I should setup correctly..
Could not find much help on this from google.
Can someone please enlighten?
Thanks
Nidhi
From: Nidhi Mittal Hada (Product Engineering Service)
Sent: Wednesday, January 18, 2017 3:49 PM
To: openstack-dev at lists.openstack.org
Subject: Re: [openstack-dev] [OpenStack-Dev][DevStack][Neutron] facing problem in devstack install - No Network found for private
Hi Andreas,
As in between you suggested to try with default devstack
neutron config params. I tried that i set no config option
for neutron part all default.
This local.conf is working well..
for others who are facing problem pasting working local.conf here
http://paste.openstack.org/show/595339/
Attaching too.
Thanks
Nidhi
________________________________
From: Nidhi Mittal Hada (Product Engineering Service)
Sent: Wednesday, January 18, 2017 2:44 PM
To: openstack-dev at lists.openstack.org<mailto:openstack-dev at lists.openstack.org>
Subject: Re: [openstack-dev] [OpenStack-Dev][DevStack][Neutron] facing problem in devstack install - No Network found for private
Andreas,
I require nothing specific from neutron side.
Just a basic working setup from neutron side
because my work is mostly on storage side of
OpenStack.
Can you please suggest a working configuration
if tried recently.
Thanks
nidhi
________________________________
From: Nidhi Mittal Hada (Product Engineering Service)
Sent: Wednesday, January 18, 2017 2:35:13 PM
To: openstack-dev at lists.openstack.org<mailto:openstack-dev at lists.openstack.org>
Subject: Re: [openstack-dev] [OpenStack-Dev][DevStack][Neutron] facing problem in devstack install - No Network found for private
HI Andreas,
Thanks for your reply.
I have no specific reason for using this network configuration in local.conf.
I have only basic knowledge of these config options even.
This local.conf network configurations used to work well with earlier
devstack openstack versions. So i did not change it..
Just this time its creating trouble.
I have not created any ovs bridge manually before running devstack.
just created this local.conf and ran ./stack.sh in devstack folder.
Can you please suggest changes if i have not created ovs-bridge manually.
At present my settings are - from local.conf - for reference -
FIXED_RANGE=10.11.12.0/24
NETWORK_GATEWAY=10.11.12.1
FIXED_NETWORK_SIZE=256
FLOATING_RANGE=10.0.2.0/24
Q_FLOATING_ALLOCATION_POOL=start=10.0.2.104,end=10.0.2.111
PUBLIC_NETWORK_GATEWAY=10.0.2.1
HOST_IP=10.0.2.15
PUBLIC_INTERFACE=eth0
Q_USE_SECGROUP=True
ENABLE_TENANT_VLANS=True
TENANT_VLAN_RANGE=1000:1999
PHYSICAL_NETWORK=default
OVS_PHYSICAL_BRIDGE=br-ex
Q_USE_PROVIDER_NETWORKING=True
Q_L3_ENABLED=False
PROVIDER_SUBNET_NAME="provider_net"
PROVIDER_NETWORK_TYPE="vlan"
SEGMENTATION_ID=2010
Thanks
Nidhi
________________________________
From: Andreas Scheuring <scheuran at linux.vnet.ibm.com<mailto:scheuran at linux.vnet.ibm.com>>
Sent: Wednesday, January 18, 2017 1:09:17 PM
To: openstack-dev at lists.openstack.org<mailto:openstack-dev at lists.openstack.org>
Subject: Re: [openstack-dev] [OpenStack-Dev][DevStack][Neutron] facing problem in devstack install - No Network found for private
** This mail has been sent from an external source **
Without looking into the details....
you're specifying
Q_USE_PROVIDER_NETWORKING=True
in your local.conf - usually this results in the creation of a single
provider network called "public". But the manila devstack plugin seems
not to be able to deal with provider networks as it's expecting a
network named "private" to be present.
Why are you using provider networks? Just for sake of VLANs? You can
also configure devstack to use vlans with the default setup. This has
worked for me in the past - results in a private network using vlans
(assuming you have created ovs b bridge br-data manually):
OVS_PHYSICAL_BRIDGE=br-data
PHYSICAL_NETWORK=phys-data
ENABLE_TENANT_TUNNELS=False
Q_ML2_TENANT_NETWORK_TYPE=vlan
ENABLE_TENANT_VLANS=True
TENANT_VLAN_RANGE=1000:1000
--
-----
Andreas
IRC: andreas_s
On Mi, 2017-01-18 at 06:59 +0000, nidhi.hada at wipro.com<mailto:nidhi.hada at wipro.com> wrote:
> Hi All,
>
>
> I was trying to install latest Newton version of OpenStack using
> devstack on my laptop, all in one machine,
>
> using Virtualbox VM. Lately i have been facing same problem in last
> few tries and installation doesn't get successful.
>
>
> My VM network adapter configuration is as below.
>
>
> Adapter1
>
>
>
>
>
>
>
> and 2nd adapter is as
>
> Adapter2
>
>
>
>
>
>
>
> Thats detail of Host Only Networking
>
>
>
>
>
>
>
>
>
>
>
>
>
> Thats my local.conf for devstack
>
>
>
> http://paste.openstack.org/show/595313/
>
>
>
>
> excerpt is
>
> FIXED_RANGE=10.11.12.0/24
>
>
> NETWORK_GATEWAY=10.11.12.1
> FIXED_NETWORK_SIZE=256
>
>
> FLOATING_RANGE=10.0.2.0/24
> Q_FLOATING_ALLOCATION_POOL=start=10.0.2.104,end=10.0.2.111
> PUBLIC_NETWORK_GATEWAY=10.0.2.1
> HOST_IP=10.0.2.15
>
>
> PUBLIC_INTERFACE=eth0
>
>
>
> Thats ubuntu version on VM
> stack at ubuntu:~/devstack$ lsb_release -d
> Description: Ubuntu 14.04.5 LTS
> stack at ubuntu:~/devstack$
>
>
> Thats my machine's network interfaces file
>
>
> stack at ubuntu:~/devstack$ cat /etc/network/interfaces
>
>
> # This file describes the network interfaces available on your system
> # and how to activate them. For more information, see interfaces(5).
>
>
> # The loopback network interface
> auto lo
> iface lo inet loopback
>
>
> # The primary network interface
> auto eth1
> iface eth1 inet static
> address 192.168.56.150
> netmask 255.255.255.0
>
>
> auto eth0
> iface eth0 inet dhcp
> stack at ubuntu:~/devstack$
>
>
>
> Error I am facing is
>
>
> http://paste.openstack.org/show/595315/
>
>
>
> Excerpt is
>
>
> 2017-01-18 06:29:55.396 |
> +++ /opt/stack/manila/devstack/plugin.sh:create_service_share_servers:287 : openstack network show private -f value -c id
> 2017-01-18 06:29:56.778 | ResourceNotFound: No Network found for
> private
> 2017-01-18 06:29:56.805 |
> ++ /opt/stack/manila/devstack/plugin.sh:create_service_share_servers:287 : private_net_id=
> 2017-01-18 06:29:56.807 |
> + /opt/stack/manila/devstack/plugin.sh:create_service_share_servers:1 : exit_trap
> 2017-01-18 06:29:56.809 | + ./stack.sh:exit_trap:487 :
> local r=1
> 2017-01-18 06:29:56.815 | ++ ./stack.sh:exit_trap:488
> : jobs -p
> 2017-01-18 06:29:56.817 | + ./stack.sh:exit_trap:488 :
> jobs=
> 2017-01-18 06:29:56.819 | + ./stack.sh:exit_trap:491 :
> [[ -n '' ]]
> 2017-01-18 06:29:56.821 | + ./stack.sh:exit_trap:497 :
> kill_spinner
> 2017-01-18 06:29:56.823 | + ./stack.sh:kill_spinner:383 :
> '[' '!' -z '' ']'
> 2017-01-18 06:29:56.824 | + ./stack.sh:exit_trap:499 :
> [[ 1 -ne 0 ]]
> 2017-01-18 06:29:56.826 | + ./stack.sh:exit_trap:500 :
> echo 'Error on exit'
> 2017-01-18 06:29:56.826 | Error on exit
> 2017-01-18 06:29:56.828 | + ./stack.sh:exit_trap:501 :
> generate-subunit 1484720095 901 fail
> 2017-01-18 06:29:57.844 | + ./stack.sh:exit_trap:502 :
> [[ -z /opt/stack/logs ]]
> 2017-01-18 06:29:57.846 | + ./stack.sh:exit_trap:505
> : /home/stack/devstack/tools/worlddump.py -d /opt/stack/logs
> 2017-01-18 06:30:03.325 | + ./stack.sh:exit_trap:511 :
> exit 1
>
>
>
> Devstack does not scucceed at all i have tried couple of times.
>
>
> Can someone help in pointing what mistake i am making that private
> network is not getting created.
>
> I do not need to use generic driver for manila share at all i can skip
> that option also.
>
>
> Any kind of input will be really helpful.
>
>
> Thanks
>
> Nidhi
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> The information contained in this electronic message and any
> attachments to this message are intended for the exclusive use of the
> addressee(s) and may contain proprietary, confidential or privileged
> information. If you are not the intended recipient, you should not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately and destroy all copies of this message and any
> attachments. WARNING: Computer viruses can be transmitted via email.
> The recipient should check this email and any attachments for the
> presence of viruses. The company accepts no liability for any damage
> caused by any virus transmitted by this email. www.wipro.com<http://www.wipro.com>
Wipro - IT Services, Consulting, System Integration & IT ...<http://www.wipro.com/>
www.wipro.com<http://www.wipro.com>
Wipro delivers IT Services, Business and Technology Consulting, IT Outsourcing and System Integration services & solutions.
> __________________________________________________________________________
> OpenStack Development Mailing List (not for usage questions)
> Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe<mailto:OpenStack-dev-request at lists.openstack.org?subject:unsubscribe>
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
openstack-dev mailing list<http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev>
lists.openstack.org
This list for the developers of OpenStack to discuss development issues and roadmap. It is focused on the next release of OpenStack: you should post on this list if ...
__________________________________________________________________________
OpenStack Development Mailing List (not for usage questions)
Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe<mailto:OpenStack-dev-request at lists.openstack.org?subject:unsubscribe>
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
openstack-dev mailing list<http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev>
lists.openstack.org
This list for the developers of OpenStack to discuss development issues and roadmap. It is focused on the next release of OpenStack: you should post on this list if ...
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20170602/116b74c8/attachment.html>
More information about the OpenStack-dev
mailing list