Open Stack

Excellent!

BTW, the following options are obsolete (as they became default in the
meanwhile)


disable_service n-net


enable_service neutron
enable_service q-svc
enable_service q-agt
enable_service q-dhcp
enable_service q-meta
enable_service q-l3


-- 
-----
Andreas 
IRC: andreas_s



On Mi, 2017-01-18 at 10:19 +0000, nidhi.hada at wipro.com wrote:
> Hi Andreas,
> 
> 
> As in between you suggested to try with default devstack
> 
> neutron config params. I tried that i set no config option 
> 
> for neutron part all default.
> 
> 
> This local.conf is working well..
> 
> 
> for others who are facing problem pasting working local.conf here
> 
> http://paste.openstack.org/show/595339/
> 
> 
> 
> Attaching too.
> 
> 
> Thanks
> 
> Nidhi
> 
> 
> 
> 
> 
> 
> 
> ______________________________________________________________________
> From: Nidhi Mittal Hada (Product Engineering Service)
> Sent: Wednesday, January 18, 2017 2:44 PM
> To: openstack-dev at lists.openstack.org
> Subject: Re: [openstack-dev] [OpenStack-Dev][DevStack][Neutron] facing
> problem in devstack install - No Network found for private 
>  
> Andreas,
> 
> 
> I require nothing specific from neutron side.
> 
> Just a basic working setup from neutron side 
> 
> because my work is mostly on storage side of 
> 
> OpenStack.
> 
> 
> Can you please suggest a working configuration 
> 
> if  tried recently.
> 
> 
> Thanks
> 
> nidhi
> 
> 
> 
> ______________________________________________________________________
> From: Nidhi Mittal Hada (Product Engineering Service)
> Sent: Wednesday, January 18, 2017 2:35:13 PM
> To: openstack-dev at lists.openstack.org
> Subject: Re: [openstack-dev] [OpenStack-Dev][DevStack][Neutron] facing
> problem in devstack install - No Network found for private 
>  
> HI Andreas,
> 
> 
> Thanks for your reply. 
> 
> 
> I have no specific reason for using this network configuration in
> local.conf.
> 
> I have only basic knowledge of these config options even.
> 
> 
> This local.conf network configurations used to work well with earlier 
> 
> devstack openstack versions. So i did not change it..
> 
> Just this time its creating trouble. 
> 
> 
> I have not created any ovs bridge manually  before running devstack.
> 
> just created this local.conf and ran ./stack.sh in devstack folder.
> 
> 
> Can you please suggest changes if i have not created ovs-bridge
> manually.
> 
> 
> At present my settings are - from local.conf - for reference - 
> 
> FIXED_RANGE=10.11.12.0/24
> NETWORK_GATEWAY=10.11.12.1
> FIXED_NETWORK_SIZE=256
> 
> 
> FLOATING_RANGE=10.0.2.0/24
> Q_FLOATING_ALLOCATION_POOL=start=10.0.2.104,end=10.0.2.111
> PUBLIC_NETWORK_GATEWAY=10.0.2.1
> HOST_IP=10.0.2.15
> 
> 
> PUBLIC_INTERFACE=eth0
> 
> 
> Q_USE_SECGROUP=True
> ENABLE_TENANT_VLANS=True
> TENANT_VLAN_RANGE=1000:1999
> PHYSICAL_NETWORK=default
> OVS_PHYSICAL_BRIDGE=br-ex
> 
> 
> 
> 
> Q_USE_PROVIDER_NETWORKING=True
> Q_L3_ENABLED=False
> 
> 
> PROVIDER_SUBNET_NAME="provider_net"
> PROVIDER_NETWORK_TYPE="vlan"
> SEGMENTATION_ID=2010
> 
> 
> 
> 
> 
> 
> Thanks
> 
> Nidhi
> 
> 
> 
> 
> ______________________________________________________________________
> From: Andreas Scheuring <scheuran at linux.vnet.ibm.com>
> Sent: Wednesday, January 18, 2017 1:09:17 PM
> To: openstack-dev at lists.openstack.org
> Subject: Re: [openstack-dev] [OpenStack-Dev][DevStack][Neutron] facing
> problem in devstack install - No Network found for private 
>  
> ** This mail has been sent from an external source **
> 
> Without looking into the details....
> 
> you're specifying
>     Q_USE_PROVIDER_NETWORKING=True
> in your local.conf - usually this results in the creation of a single
> provider network called "public". But the manila devstack plugin seems
> not to be able to deal with provider networks as it's expecting a
> network named "private" to be present.
> 
> 
> Why are you using provider networks? Just for sake of VLANs? You can
> also configure devstack to use vlans with the default setup. This has
> worked for me in the past - results in a private network using vlans
> (assuming you have created ovs b bridge br-data manually):
> 
> 
> OVS_PHYSICAL_BRIDGE=br-data
> PHYSICAL_NETWORK=phys-data
> 
> ENABLE_TENANT_TUNNELS=False
> Q_ML2_TENANT_NETWORK_TYPE=vlan
> ENABLE_TENANT_VLANS=True
> TENANT_VLAN_RANGE=1000:1000
> 
> 
> 
> 
> --
> -----
> Andreas
> IRC: andreas_s
> 
> 
> 
> On Mi, 2017-01-18 at 06:59 +0000, nidhi.hada at wipro.com wrote:
> > Hi All,
> >
> >
> > I was trying to install latest Newton version of OpenStack using
> > devstack on my laptop, all in one machine,
> >
> > using Virtualbox VM. Lately i have been facing same problem in last
> > few tries and installation doesn't get successful.
> >
> >
> > My VM network adapter configuration is as below.
> >
> >
> > Adapter1
> >
> >
> >
> >
> >
> >
> >
> > and 2nd adapter is as
> >
> > Adapter2
> >
> >
> >
> >
> >
> >
> >
> > Thats detail of Host Only Networking
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Thats my local.conf for devstack
> >
> >
> >
> > http://paste.openstack.org/show/595313/
> >
> >
> >
> >
> > excerpt is
> >
> > FIXED_RANGE=10.11.12.0/24
> >
> >
> > NETWORK_GATEWAY=10.11.12.1
> > FIXED_NETWORK_SIZE=256
> >
> >
> > FLOATING_RANGE=10.0.2.0/24
> > Q_FLOATING_ALLOCATION_POOL=start=10.0.2.104,end=10.0.2.111
> > PUBLIC_NETWORK_GATEWAY=10.0.2.1
> > HOST_IP=10.0.2.15
> >
> >
> > PUBLIC_INTERFACE=eth0
> >
> >
> >
> > Thats ubuntu version on VM
> > stack at ubuntu:~/devstack$ lsb_release -d
> > Description: Ubuntu 14.04.5 LTS
> > stack at ubuntu:~/devstack$
> >
> >
> > Thats my machine's network interfaces file
> >
> >
> > stack at ubuntu:~/devstack$ cat /etc/network/interfaces
> >
> >
> > # This file describes the network interfaces available on your
> system
> > # and how to activate them. For more information, see interfaces(5).
> >
> >
> > # The loopback network interface
> > auto lo
> > iface lo inet loopback
> >
> >
> > # The primary network interface
> > auto eth1
> > iface eth1 inet static
> > address 192.168.56.150
> > netmask 255.255.255.0
> >
> >
> > auto eth0
> > iface eth0 inet dhcp
> > stack at ubuntu:~/devstack$
> >
> >
> >
> > Error I am facing is
> >
> >
> > http://paste.openstack.org/show/595315/
> >
> >
> >
> > Excerpt is
> >
> >
> > 2017-01-18 06:29:55.396 |
> >
> +++ /opt/stack/manila/devstack/plugin.sh:create_service_share_servers:287 :   openstack network show private -f value -c id
> > 2017-01-18 06:29:56.778 | ResourceNotFound: No Network found for
> > private
> > 2017-01-18 06:29:56.805 |
> >
> ++ /opt/stack/manila/devstack/plugin.sh:create_service_share_servers:287 :   private_net_id=
> > 2017-01-18 06:29:56.807 |
> >
> + /opt/stack/manila/devstack/plugin.sh:create_service_share_servers:1 :   exit_trap
> > 2017-01-18 06:29:56.809 |
> + ./stack.sh:exit_trap:487                 :
> > local r=1
> > 2017-01-18 06:29:56.815 | ++ ./stack.sh:exit_trap:488
> >   :   jobs -p
> > 2017-01-18 06:29:56.817 |
> + ./stack.sh:exit_trap:488                 :
> > jobs=
> > 2017-01-18 06:29:56.819 |
> + ./stack.sh:exit_trap:491                 :
> > [[ -n '' ]]
> > 2017-01-18 06:29:56.821 |
> + ./stack.sh:exit_trap:497                 :
> > kill_spinner
> > 2017-01-18 06:29:56.823 |
> + ./stack.sh:kill_spinner:383              :
> > '[' '!' -z '' ']'
> > 2017-01-18 06:29:56.824 |
> + ./stack.sh:exit_trap:499                 :
> > [[ 1 -ne 0 ]]
> > 2017-01-18 06:29:56.826 |
> + ./stack.sh:exit_trap:500                 :
> > echo 'Error on exit'
> > 2017-01-18 06:29:56.826 | Error on exit
> > 2017-01-18 06:29:56.828 |
> + ./stack.sh:exit_trap:501                 :
> > generate-subunit 1484720095 901 fail
> > 2017-01-18 06:29:57.844 |
> + ./stack.sh:exit_trap:502                 :
> > [[ -z /opt/stack/logs ]]
> > 2017-01-18 06:29:57.846 | + ./stack.sh:exit_trap:505
> >   :   /home/stack/devstack/tools/worlddump.py -d /opt/stack/logs
> > 2017-01-18 06:30:03.325 |
> + ./stack.sh:exit_trap:511                 :
> > exit 1
> >
> >
> >
> > Devstack does not scucceed at all i have tried couple of times.
> >
> >
> > Can someone help in pointing what mistake i am making that private
> > network is not getting created.
> >
> > I do not need to use generic driver for manila share at all i can
> skip
> > that option also.
> >
> >
> > Any kind of input will be really helpful.
> >
> >
> > Thanks
> >
> > Nidhi
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > The information contained in this electronic message and any
> > attachments to this message are intended for the exclusive use of
> the
> > addressee(s) and may contain proprietary, confidential or privileged
> > information. If you are not the intended recipient, you should not
> > disseminate, distribute or copy this e-mail. Please notify the
> sender
> > immediately and destroy all copies of this message and any
> > attachments. WARNING: Computer viruses can be transmitted via email.
> > The recipient should check this email and any attachments for the
> > presence of viruses. The company accepts no liability for any damage
> > caused by any virus transmitted by this email. www.wipro.com 
> 
> Wipro - IT Services, Consulting, System Integration & IT ...
> www.wipro.com
> Wipro delivers IT Services, Business and Technology Consulting, IT
> Outsourcing and System Integration services & solutions.
> 
> 
> >
> __________________________________________________________________________
> > OpenStack Development Mailing List (not for usage questions)
> > Unsubscribe:
> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev 
> 
> openstack-dev mailing list
> lists.openstack.org
> This list for the developers of OpenStack to discuss development
> issues and roadmap. It is focused on the next release of OpenStack:
> you should post on this list if ...
> 
> 
> 
> 
> __________________________________________________________________________
> OpenStack Development Mailing List (not for usage questions)
> Unsubscribe:
> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev 
> 
> openstack-dev mailing list
> lists.openstack.org
> This list for the developers of OpenStack to discuss development
> issues and roadmap. It is focused on the next release of OpenStack:
> you should post on this list if ...
> 
> 
> 
> The information contained in this electronic message and any
> attachments to this message are intended for the exclusive use of the
> addressee(s) and may contain proprietary, confidential or privileged
> information. If you are not the intended recipient, you should not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately and destroy all copies of this message and any
> attachments. WARNING: Computer viruses can be transmitted via email.
> The recipient should check this email and any attachments for the
> presence of viruses. The company accepts no liability for any damage
> caused by any virus transmitted by this email. www.wipro.com 
> __________________________________________________________________________
> OpenStack Development Mailing List (not for usage questions)
> Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev