[openstack-dev] [tricircle] playing tricircle with devstack under two-region configuration
时鹏飞
shipengfei92 at gmail.com
Wed Mar 2 06:05:35 UTC 2016
Hi, joe and zhiyuan
Now when I try to verify the North-South Networking
And in the vm2, it can ping the extern-router ip 10.50.11.30, and the floating 10.50.11.31 but cannot ping the gateway 10.50.11.1
The “Ping” flows can be captured at br-int, but cannot be captured at br-ext. What’s may the problem?
And I also found the network doesn’t use ns_bridge to work.
Does the NS network hasn’t be completed?
stack at node1:~$ neutron port-list
+--------------------------------------+--------------------------------------+-------------------+----------------------------------------------------------+
| id | name | mac_address | fixed_ips |
+--------------------------------------+--------------------------------------+-------------------+----------------------------------------------------------+
| 6c4c3b3e-df68-4300-ba16-ef6eabb64cfa | 6c4c3b3e-df68-4300-ba16-ef6eabb64cfa | fa:16:3e:e4:7f:1e | {"subnet_id": "372d941c-a3c3-436f-b231-ada7c95367c5", |
| | | | "ip_address": "10.0.1.3"} |
| 391269f0-b1ad-4023-96c9-25d27fdc33f2 | | fa:16:3e:1b:3b:3e | {"subnet_id": "372d941c-a3c3-436f-b231-ada7c95367c5", |
| | | | "ip_address": "10.0.1.2"} |
| 9022f0f1-b464-4ee4-8a1e-d435629e22a7 | 9022f0f1-b464-4ee4-8a1e-d435629e22a7 | fa:16:3e:72:a6:69 | {"subnet_id": "96d732d4-8315-41be-bfb1-596542767ed8", |
| | | | "ip_address": "100.0.0.2"} |
| 58be20ba-cf19-4f37-8b0a-afdb4b8eeed6 | 58be20ba-cf19-4f37-8b0a-afdb4b8eeed6 | fa:16:3e:b3:75:45 | {"subnet_id": "372d941c-a3c3-436f-b231-ada7c95367c5", |
| | | | "ip_address": "10.0.1.1"} |
| 0e499452-c301-40ff-a730-d35016f83f83 | | fa:16:3e:32:ab:c9 | {"subnet_id": "ef7d8a5d-2fcd-4831-9433-802480f790ae", |
| | | | "ip_address": "10.0.2.2"} |
| 5ed06d6b-b506-41e5-b4fa-2d4d130e8770 | 5ed06d6b-b506-41e5-b4fa-2d4d130e8770 | fa:16:3e:5d:89:67 | {"subnet_id": "ef7d8a5d-2fcd-4831-9433-802480f790ae", |
| | | | "ip_address": "10.0.2.3"} |
| dbc13aee-5d9a-4aac-9903-a540df5a88a6 | dbc13aee-5d9a-4aac-9903-a540df5a88a6 | fa:16:3e:22:90:7f | {"subnet_id": "ef7d8a5d-2fcd-4831-9433-802480f790ae", |
| | | | "ip_address": "10.0.2.1"} |
| baadec86-65ed-4351-9eaa-781c4a3a850b | ns_bridge_port | fa:16:3e:92:4f:08 | {"subnet_id": "e622b4bc-cfc9-45ef-9be0-f1f33162ca00", |
| | | | "ip_address": "100.128.0.2"} |
| 8b0efc94-b12f-484b-8341-3c7213197c28 | 8b0efc94-b12f-484b-8341-3c7213197c28 | fa:16:3e:61:0e:9e | {"subnet_id": "96d732d4-8315-41be-bfb1-596542767ed8", |
| | | | "ip_address": "100.0.0.3"} |
| 7f0ff0b1-d64a-405e-a2f3-5f1e6338ebb7 | | fa:16:3e:77:52:8a | "<neutron.db.models_v2.IPAllocation[object at |
| | | | 7f999b355d50] {port_id=u'7f0ff0b1-d64a-405e- |
| | | | a2f3-5f1e6338ebb7', ip_address=u'10.50.11.31', |
| | | | subnet_id=u'0ccf5d2a-ddd7-4dca-b7f4-a3814d5ea435', |
| | | | network_id=u'317197e9-43c5-4ceb-8121-f98cfa6e4ac5'}>" |
| d59340dd-1903-4d67-a879-68c41369ea4f | | fa:16:3e:0e:e7:68 | "<neutron.db.models_v2.IPAllocation[object at |
| | | | 7f999b562190] |
| | | | {port_id=u'd59340dd-1903-4d67-a879-68c41369ea4f', |
| | | | ip_address=u'10.50.11.30', subnet_id=u'0ccf5d2a-ddd7 |
| | | | -4dca-b7f4-a3814d5ea435', |
| | | | network_id=u'317197e9-43c5-4ceb-8121-f98cfa6e4ac5'}>" |
+--------------------------------------+--------------------------------------+-------------------+---------------------------------------------------------
Are there any documents can tell the detailed implement of the networks? such as how ns_bridge and ew_bridge work and so on?
Thanks!
Best Regards
Pengfei Shi (时鹏飞)
Shanghai Jiao Tong University
Network & Information Center Room 304
shipengfei92 at gmail.com
> On Mar 1, 2016, at 10:23 AM, 时鹏飞 <shipengfei92 at gmail.com> wrote:
>
> Hi, Zhiyuan
>
> Is the problem caused by admin client?
>
> My client is:
>
> export OS_PROJECT_DOMAIN_ID=default
> export OS_USER_DOMAIN_ID=default
> export OS_PROJECT_NAME=admin
> export OS_TENANT_NAME=admin
> export OS_USERNAME=admin
> export OS_PASSWORD=password
> export OS_AUTH_URL=http://127.0.0.1:5000 <http://127.0.0.1:5000/>
> export OS_IDENTITY_API_VERSION=3
> export OS_REGION_NAME=RegionOne
>
> All the actions I performed in Node1.
>
>
>
> stack at node1:~$ neutron --os-region-name Pod2 router-list
> +--------------------------------------+--------------------------------------+--------------------------------------------+-------------+-------+
> | id | name | external_gateway_info | distributed | ha |
> +--------------------------------------+--------------------------------------+--------------------------------------------+-------------+-------+
> | 2b80205e-a897-496e-82e0-0bdb81f505a6 | b36a3eef-3494-4773-86c6-2995c59ceac1 | {"network_id": "965c04f1-9c7a- | False | False |
> | | | 44f3-92d4-4c59b4c5e4af", "enable_snat": | | |
> | | | true, "external_fixed_ips": [{"subnet_id": | | |
> | | | "0e05e776-6699-49a6-a26e-ed4650e3daf6", | | |
> | | | "ip_address": "10.50.11.30"}]} | | |
> +--------------------------------------+--------------------------------------+--------------------------------------------+-------------+-------+
> stack at node1:~$ neutron --os-region-name Pod2 router-port-list 2b80205e-a897-496e-82e0-0bdb81f505a6
> +--------------------------------------+--------------------------------------+-------------------+----------------------------------------------------------+
> | id | name | mac_address | fixed_ips |
> +--------------------------------------+--------------------------------------+-------------------+----------------------------------------------------------+
> | a2b8d62d-a924-4777-bb93-a7c5faadd5ab | 4f2fb455-8cc5-43ea-87cd-4d4d845548a0 | fa:16:3e:ed:d2:49 | {"subnet_id": "684efb20-8894-48d7-a2f5-b19da109776f", |
> | | | | "ip_address": "10.0.2.1"} |
> | ab75df39-3dbe-450e-b3df-4977636958f5 | | fa:16:3e:a7:a2:11 | {"subnet_id": "dd9f81ae-3839-45a0-8f1e-9b5e585835f8", |
> | | | | "ip_address": "100.128.0.1"} |
> | d3e7e52d-e422-4bd9-b102-16c8af6d48c6 | | fa:16:3e:d3:bb:48 | {"subnet_id": "0e05e776-6699-49a6-a26e-ed4650e3daf6", |
> | | | | "ip_address": "10.50.11.30"} |
> | e9e9c7ac-8da5-4afa-b16a-e20c8961d024 | 15cc5862-443f-44a0-a060-33a66b0686cc | fa:16:3e:b9:2c:14 | {"subnet_id": "1dc7d0f9-4ca1-4202-a0dd-491ab606336d", |
> | | | | "ip_address": "100.0.0.3"} |
> +--------------------------------------+--------------------------------------+-------------------+----------------------------------------------------------+
> stack at node1:~$ neutron --os-region-name Pod2 router-show 2b80205e-a897-496e-82e0-0bdb81f505a6
> +-------------------------+----------------------------------------------------------------------------------------------------------------------------------+
> | Field | Value |
> +-------------------------+----------------------------------------------------------------------------------------------------------------------------------+
> | admin_state_up | True |
> | availability_zone_hints | |
> | availability_zones | nova |
> | distributed | False |
> | external_gateway_info | {"network_id": "965c04f1-9c7a-44f3-92d4-4c59b4c5e4af", "enable_snat": true, "external_fixed_ips": [{"subnet_id": |
> | | "0e05e776-6699-49a6-a26e-ed4650e3daf6", "ip_address": "10.50.11.30"}]} |
> | ha | False |
> | id | 2b80205e-a897-496e-82e0-0bdb81f505a6 |
> | name | b36a3eef-3494-4773-86c6-2995c59ceac1 |
> | routes | {"destination": "10.0.1.0/24", "nexthop": "100.0.0.2"} |
> | status | ACTIVE |
> | tenant_id | f55068b6dcfd4b4d9d357b46eedc6644 |
> +-------------------------+----------------------------------------------------------------------------------------------------------------------------------+
> stack at node1:~$
>
>
>
> stack at node1:~$ neutron --os-region-name Pod1 router-list
> +--------------------------------------+--------------------------------------+-----------------------+-------------+-------+
> | id | name | external_gateway_info | distributed | ha |
> +--------------------------------------+--------------------------------------+-----------------------+-------------+-------+
> | 13750c02-8c40-48ca-9ca6-4f58a245792a | b36a3eef-3494-4773-86c6-2995c59ceac1 | null | False | False |
> +--------------------------------------+--------------------------------------+-----------------------+-------------+-------+
> stack at node1:~$ neutron --os-region-name Pod1 router-port-list 13750c02-8c40-48ca-9ca6-4f58a245792a
> +--------------------------------------+--------------------------------------+-------------------+----------------------------------------------------------+
> | id | name | mac_address | fixed_ips |
> +--------------------------------------+--------------------------------------+-------------------+----------------------------------------------------------+
> | 17c39efd-9e6e-4244-a27e-57b4c00da6de | 5367f76e-6a00-478d-b9b8-54d0b4754da7 | fa:16:3e:01:70:36 | {"subnet_id": "2a65c17e-949c-4a48-9a62-634cd6aece64", |
> | | | | "ip_address": "100.0.0.2"} |
> | 736cc41c-4fe8-4a6d-99c0-739fce789050 | fda27c48-ce7c-4852-b9f6-4af7da2d0b3d | fa:16:3e:26:f3:40 | {"subnet_id": "a6787a65-123e-4fae-9725-61d5598c7e5a", |
> | | | | "ip_address": "10.0.1.1"} |
> +--------------------------------------+--------------------------------------+-------------------+----------------------------------------------------------+
> stack at node1:~$ neutron --os-region-name Pod1 router-show 13750c02-8c40-48ca-9ca6-4f58a245792a
> +-------------------------+--------------------------------------------------------+
> | Field | Value |
> +-------------------------+--------------------------------------------------------+
> | admin_state_up | True |
> | availability_zone_hints | |
> | availability_zones | nova |
> | distributed | False |
> | external_gateway_info | |
> | ha | False |
> | id | 13750c02-8c40-48ca-9ca6-4f58a245792a |
> | name | b36a3eef-3494-4773-86c6-2995c59ceac1 |
> | routes | {"destination": "10.0.2.0/24", "nexthop": "100.0.0.3"} |
> | status | ACTIVE |
> | tenant_id | f55068b6dcfd4b4d9d357b46eedc6644 |
> +-------------------------+————————————————————————————+
>
>
>
>
>
> Best Regards
>
> Pengfei Shi (时鹏飞)
> Shanghai Jiao Tong University
> Network & Information Center Room 304
>
> shipengfei92 at gmail.com <mailto:shipengfei92 at gmail.com>
>
>
>
>
>
>
>> On Feb 29, 2016, at 4:52 PM, Vega Cai <luckyvega.g at gmail.com <mailto:luckyvega.g at gmail.com>> wrote:
>>
>> Oh, I think out another reason for the problem. If you are using Vmware Vcenter, you need to enable "Promiscuous Mode" and set "MAC Address Changes" to "Accept".
>>
>> Here is a reference in Chinese: http://www.net130.com/CMS/Pub/special/special_virtual/special_virtual_js/2012_06_26_28741.htm <http://www.net130.com/CMS/Pub/special/special_virtual/special_virtual_js/2012_06_26_28741.htm>
>>
>> BR
>> Zhiyuan
>>
>> On 29 February 2016 at 16:12, Vega Cai <luckyvega.g at gmail.com <mailto:luckyvega.g at gmail.com>> wrote:
>> Hi Pengfei,
>>
>> It's expected that there's no port for 100.0.0.1 since what we attach to router are 100.0.0.2 and 100.0.0.3.
>>
>> Try to ping 10.0.2.1 in vm1 and to ping 10.0.1.1 in vm2 to see if you can get reply. There may be security group rules that prevent vm to be accessed.
>>
>> The check if all the process is done, please run the following command:
>>
>> # get router bottom id
>> neutron --os-region-name Pod1 router-list
>> neutron --os-region-name Pod2 router-list
>>
>> # check if each router is correctly processed
>> neutron --os-region-name Pod1 router-port-list <router-buttom-id>
>> neutron --os-region-name Pod2 router-port-list <router-buttom-id>
>> neutron --os-region-name Pod1 router-show <router-buttom-id>
>> neutron --os-region-name Pod2 router-show <router-buttom-id>
>>
>> BR
>> Zhiyuan
>>
>>
>> On 29 February 2016 at 14:41, 时鹏飞 <shipengfei92 at gmail.com <mailto:shipengfei92 at gmail.com>> wrote:
>> And, I find ew_bridge has a gateway:
>>
>> root at node1:/home/stack# neutron subnet-show 34405fae-e796-48ae-a6e7-f7943b84a117
>> +-------------------+---------------------------------------------------+
>> | Field | Value |
>> +-------------------+---------------------------------------------------+
>> | allocation_pools | {"start": "100.0.0.2", "end": "100.0.0.254"} |
>> | cidr | 100.0.0.0/24 <http://100.0.0.0/24> |
>> | dns_nameservers | |
>> | enable_dhcp | False |
>> | gateway_ip | 100.0.0.1 |
>> | host_routes | |
>> | id | 34405fae-e796-48ae-a6e7-f7943b84a117 |
>> | ip_version | 4 |
>> | ipv6_address_mode | |
>> | ipv6_ra_mode | |
>> | name | ew_bridge_subnet_f55068b6dcfd4b4d9d357b46eedc6644 |
>> | network_id | 0828b209-71a0-481e-9e2c-5c68d2b18387 |
>> | subnetpool_id | f7360e3b-f74c-474f-9ee5-e43657dd077f |
>> | tenant_id | f55068b6dcfd4b4d9d357b46eedc6644 |
>> +-------------------+---------------------------------------------------+
>>
>> but in the port there is no device for gateway 100.0.0.1
>>
>> root at node1:/home/stack# neutron port-list
>> +--------------------------------------+--------------------------------------+-------------------+----------------------------------------------------------+
>> | id | name | mac_address | fixed_ips |
>> +--------------------------------------+--------------------------------------+-------------------+----------------------------------------------------------+
>> | 5ff4f7c4-5e47-4cc5-8a17-e011938bd930 | 5ff4f7c4-5e47-4cc5-8a17-e011938bd930 | fa:16:3e:d0:1e:8e | {"subnet_id": "aeb34101-0e0f-402c-94a4-e4d45235d531", |
>> | | | | "ip_address": "10.0.2.3"} |
>> | 4f2fb455-8cc5-43ea-87cd-4d4d845548a0 | 4f2fb455-8cc5-43ea-87cd-4d4d845548a0 | fa:16:3e:ed:d2:49 | {"subnet_id": "aeb34101-0e0f-402c-94a4-e4d45235d531", |
>> | | | | "ip_address": "10.0.2.1"} |
>> | 67e16de6-ad02-4e5f-b035-6525a5a6dcc4 | | fa:16:3e:c6:07:65 | {"subnet_id": "aeb34101-0e0f-402c-94a4-e4d45235d531", |
>> | | | | "ip_address": "10.0.2.2"} |
>> | 15cc5862-443f-44a0-a060-33a66b0686cc | 15cc5862-443f-44a0-a060-33a66b0686cc | fa:16:3e:b9:2c:14 | {"subnet_id": "34405fae-e796-48ae-a6e7-f7943b84a117", |
>> | | | | "ip_address": "100.0.0.3"} |
>> | 5367f76e-6a00-478d-b9b8-54d0b4754da7 | 5367f76e-6a00-478d-b9b8-54d0b4754da7 | fa:16:3e:01:70:36 | {"subnet_id": "34405fae-e796-48ae-a6e7-f7943b84a117", |
>> | | | | "ip_address": "100.0.0.2"} |
>> | 1be92584-a800-474f-a105-877e8a30875f | 1be92584-a800-474f-a105-877e8a30875f | fa:16:3e:5d:0d:59 | {"subnet_id": "6a1cafcd-6bc7-4788-8a38-b26616dd43a4", |
>> | | | | "ip_address": "10.0.1.3"} |
>> | fda27c48-ce7c-4852-b9f6-4af7da2d0b3d | fda27c48-ce7c-4852-b9f6-4af7da2d0b3d | fa:16:3e:26:f3:40 | {"subnet_id": "6a1cafcd-6bc7-4788-8a38-b26616dd43a4", |
>> | | | | "ip_address": "10.0.1.1"} |
>> | 7b51933e-edb4-4210-9df4-e346fe99fded | | fa:16:3e:8f:d7:ad | {"subnet_id": "6a1cafcd-6bc7-4788-8a38-b26616dd43a4", |
>> | | | | "ip_address": "10.0.1.2"} |
>> | 4b5a8392-abfc-4261-b98f-e39e377991a7 | | fa:16:3e:ae:bc:4d | "<neutron.db.models_v2.IPAllocation[object at |
>> | | | | 7f9d216c99d0] {port_id=u'4b5a8392-abfc-4261-b98f- |
>> | | | | e39e377991a7', ip_address=u'10.50.11.30', |
>> | | | | subnet_id=u'b50d19d5-435e-4c46-a8fc-cdfc02fbdd29', |
>> | | | | network_id=u'e268445b-398f-40c0-ba03-6ebcc33a64a7'}>" |
>> | aee04b98-4dfb-431a-8b8f-50c1f6a67fc6 | | fa:16:3e:3e:d8:ac | "<neutron.db.models_v2.IPAllocation[object at |
>> | | | | 7f9d217eba10] {port_id=u'aee04b98-4dfb-431a-8b8f- |
>> | | | | 50c1f6a67fc6', ip_address=u'10.50.11.31', |
>> | | | | subnet_id=u'b50d19d5-435e-4c46-a8fc-cdfc02fbdd29', |
>> | | | | network_id=u'e268445b-398f-40c0-ba03-6ebcc33a64a7'}>" |
>> +--------------------------------------+--------------------------------------+-------------------+----------------------------------------------------------+
>> root at node1:/home/stack#
>>
>>
>> Best Regards
>>
>> Pengfei Shi (时鹏飞)
>> Shanghai Jiao Tong University
>> Network & Information Center Room 304
>>
>> shipengfei92 at gmail.com <mailto:shipengfei92 at gmail.com>
>>
>>
>>
>>
>>
>>
>>> On Feb 29, 2016, at 12:55 PM, 时鹏飞 <shipengfei92 at gmail.com <mailto:shipengfei92 at gmail.com>> wrote:
>>>
>>> Hi, Joe and Zhiyuan
>>>
>>> Sorry for bother you again.
>>>
>>> When I finish install two cross pod nodes and try ping command, it cannot reply.
>>>
>>> In vm1: ip:10.0.1.3
>>> ping 10.0.1.1 gateway is OK;
>>> ping 10.0.2.3(vm2) no reply.
>>>
>>> In vm2: ip:10.0.2.3
>>> ping 10.0.2.1 gateway is OK;
>>> ping 10.0.1.3(vm1) no reply.
>>>
>>>
>>>
>>> And I use wireshark to capture the flows in internal VLAN network:
>>>
>>> <PastedGraphic-1.tiff>
>>>
>>> <PastedGraphic-2.tiff>
>>>
>>>
>>> I find that, the Ping has reply, but it cannot be recognised.
>>>
>>> Is the problems caused by ew_bridge_net?
>>>
>>>
>>>
>>> some info as the below:
>>>
>>>
>>> stack at node1:~$ neutron net-list
>>> +--------------------------------------+------------------------------------------------+-----------------------------------------------------+
>>> | id | name | subnets |
>>> +--------------------------------------+------------------------------------------------+-----------------------------------------------------+
>>> | e268445b-398f-40c0-ba03-6ebcc33a64a7 | ext-net | b50d19d5-435e-4c46-a8fc-cdfc02fbdd29 10.50.11.0/26 <http://10.50.11.0/26> |
>>> | 0828b209-71a0-481e-9e2c-5c68d2b18387 | ew_bridge_net_f55068b6dcfd4b4d9d357b46eedc6644 | 34405fae-e796-48ae-a6e7-f7943b84a117 100.0.0.0/24 <http://100.0.0.0/24> |
>>> | 38066909-c315-41d0-a83e-11aebab1c51d | net2 | aeb34101-0e0f-402c-94a4-e4d45235d531 10.0.2.0/24 <http://10.0.2.0/24> |
>>> | acb5039a-c076-49ff-9db6-3879630dc531 | net1 | 6a1cafcd-6bc7-4788-8a38-b26616dd43a4 10.0.1.0/24 <http://10.0.1.0/24> |
>>> | afd0ea21-8e0e-4951-97bb-296c18e2ed6a | ns_bridge_net_f55068b6dcfd4b4d9d357b46eedc6644 | a241e73f-8ae6-4a9f-9e03-445f70a11629 100.128.0.0/24 <http://100.128.0.0/24> |
>>> +--------------------------------------+------------------------------------------------+-----------------------------------------------------+
>>>
>>>
>>> stack at node1:~$ neutron port-list
>>> +--------------------------------------+--------------------------------------+-------------------+----------------------------------------------------------+
>>> | id | name | mac_address | fixed_ips |
>>> +--------------------------------------+--------------------------------------+-------------------+----------------------------------------------------------+
>>> | 5ff4f7c4-5e47-4cc5-8a17-e011938bd930 | 5ff4f7c4-5e47-4cc5-8a17-e011938bd930 | fa:16:3e:d0:1e:8e | {"subnet_id": "aeb34101-0e0f-402c-94a4-e4d45235d531", |
>>> | | | | "ip_address": "10.0.2.3"} |
>>> | 4f2fb455-8cc5-43ea-87cd-4d4d845548a0 | 4f2fb455-8cc5-43ea-87cd-4d4d845548a0 | fa:16:3e:ed:d2:49 | {"subnet_id": "aeb34101-0e0f-402c-94a4-e4d45235d531", |
>>> | | | | "ip_address": "10.0.2.1"} |
>>> | 67e16de6-ad02-4e5f-b035-6525a5a6dcc4 | | fa:16:3e:c6:07:65 | {"subnet_id": "aeb34101-0e0f-402c-94a4-e4d45235d531", |
>>> | | | | "ip_address": "10.0.2.2"} |
>>> | 15cc5862-443f-44a0-a060-33a66b0686cc | 15cc5862-443f-44a0-a060-33a66b0686cc | fa:16:3e:b9:2c:14 | {"subnet_id": "34405fae-e796-48ae-a6e7-f7943b84a117", |
>>> | | | | "ip_address": "100.0.0.3"} |
>>> | 5367f76e-6a00-478d-b9b8-54d0b4754da7 | 5367f76e-6a00-478d-b9b8-54d0b4754da7 | fa:16:3e:01:70:36 | {"subnet_id": "34405fae-e796-48ae-a6e7-f7943b84a117", |
>>> | | | | "ip_address": "100.0.0.2"} |
>>> | 1be92584-a800-474f-a105-877e8a30875f | 1be92584-a800-474f-a105-877e8a30875f | fa:16:3e:5d:0d:59 | {"subnet_id": "6a1cafcd-6bc7-4788-8a38-b26616dd43a4", |
>>> | | | | "ip_address": "10.0.1.3"} |
>>> | fda27c48-ce7c-4852-b9f6-4af7da2d0b3d | fda27c48-ce7c-4852-b9f6-4af7da2d0b3d | fa:16:3e:26:f3:40 | {"subnet_id": "6a1cafcd-6bc7-4788-8a38-b26616dd43a4", |
>>> | | | | "ip_address": "10.0.1.1"} |
>>> | 7b51933e-edb4-4210-9df4-e346fe99fded | | fa:16:3e:8f:d7:ad | {"subnet_id": "6a1cafcd-6bc7-4788-8a38-b26616dd43a4", |
>>> | | | | "ip_address": "10.0.1.2"} |
>>> | 4b5a8392-abfc-4261-b98f-e39e377991a7 | | fa:16:3e:ae:bc:4d | "<neutron.db.models_v2.IPAllocation[object at |
>>> | | | | 7f9d252aad90] {port_id=u'4b5a8392-abfc-4261-b98f- |
>>> | | | | e39e377991a7', ip_address=u'10.50.11.30', |
>>> | | | | subnet_id=u'b50d19d5-435e-4c46-a8fc-cdfc02fbdd29', |
>>> | | | | network_id=u'e268445b-398f-40c0-ba03-6ebcc33a64a7'}>" |
>>> | aee04b98-4dfb-431a-8b8f-50c1f6a67fc6 | | fa:16:3e:3e:d8:ac | "<neutron.db.models_v2.IPAllocation[object at |
>>> | | | | 7f9d2174a710] {port_id=u'aee04b98-4dfb-431a-8b8f- |
>>> | | | | 50c1f6a67fc6', ip_address=u'10.50.11.31', |
>>> | | | | subnet_id=u'b50d19d5-435e-4c46-a8fc-cdfc02fbdd29', |
>>> | | | | network_id=u'e268445b-398f-40c0-ba03-6ebcc33a64a7'}>" |
>>> +--------------------------------------+--------------------------------------+-------------------+----------------------------------------------------------+
>>>
>>>
>>>
>>>
>>> Best Regards
>>>
>>> Pengfei Shi (时鹏飞)
>>> Shanghai Jiao Tong University
>>> Network & Information Center Room 304
>>>
>>> shipengfei92 at gmail.com <mailto:shipengfei92 at gmail.com>
>>>
>>>
>>>
>>>
>>>
>>>
>>>> On Feb 29, 2016, at 8:36 AM, joehuang <joehuang at huawei.com <mailto:joehuang at huawei.com>> wrote:
>>>>
>>>> Hi, Pengfei,
>>>>
>>>> Volume type is not supported in Tricircle yet.
>>>>
>>>> Best Regards
>>>> Chaoyi Huang ( Joe Huang )
>>>>
>>>> From: 时鹏飞 [mailto:shipengfei92 at gmail.com <mailto:shipengfei92 at gmail.com>]
>>>> Sent: Sunday, February 28, 2016 9:36 AM
>>>> To: OpenStack Development Mailing List (not for usage questions)
>>>> Subject: Re: [openstack-dev] [tricircle] playing tricircle with devstack under two-region configuration
>>>>
>>>> Hi,Joe and Zhiyuan,
>>>>
>>>> When I install the devstack in Node2, it occur errors when test cinder_volume_types:
>>>>
>>>> 2016-02-27 17:05:00.920 | + ./devstack/stack.sh:main:L1267: create_volume_types
>>>> 2016-02-27 17:05:00.920 | + /home/stack/devstack/lib/cinder:create_volume_types:L549: is_service_enabled c-api
>>>> 2016-02-27 17:05:00.927 | + /home/stack/devstack/functions-common:is_service_enabled:L2026: return 0
>>>> 2016-02-27 17:05:00.927 | + /home/stack/devstack/lib/cinder:create_volume_types:L549: [[ -n lvm:lvmdriver-1 ]]
>>>> 2016-02-27 17:05:00.927 | + /home/stack/devstack/lib/cinder:create_volume_types:L550: local be be_name
>>>> 2016-02-27 17:05:00.928 | + /home/stack/devstack/lib/cinder:create_volume_types:L551: for be in '${CINDER_ENABLED_BACKENDS//,/ }'
>>>> 2016-02-27 17:05:00.928 | + /home/stack/devstack/lib/cinder:create_volume_types:L552: be_name=lvmdriver-1
>>>> 2016-02-27 17:05:00.928 | + /home/stack/devstack/lib/cinder:create_volume_types:L553: openstack volume type create --property volume_backend_name=lvmdriver-1 lvmdriver-1
>>>> 2016-02-27 17:05:02.937 | Unable to establish connection tohttp://10.50.11.5:19997/v2/00d182cbe7664762809f4f5a0866635d/types <http://10.50.11.5:19997/v2/00d182cbe7664762809f4f5a0866635d/types>
>>>> 2016-02-27 17:05:03.025 | + /home/stack/devstack/lib/cinder:create_volume_types:L1: exit_trap
>>>> 2016-02-27 17:05:03.025 | + ./devstack/stack.sh:exit_trap:L474: local r=1
>>>> 2016-02-27 17:05:03.027 | ++ ./devstack/stack.sh:exit_trap:L475: jobs -p
>>>> 2016-02-27 17:05:03.028 | + ./devstack/stack.sh:exit_trap:L475: jobs=
>>>> 2016-02-27 17:05:03.028 | + ./devstack/stack.sh:exit_trap:L478: [[ -n '' ]]
>>>> 2016-02-27 17:05:03.028 | + ./devstack/stack.sh:exit_trap:L484: kill_spinner
>>>> 2016-02-27 17:05:03.028 | + ./devstack/stack.sh:kill_spinner:L370: '[' '!' -z '' ']'
>>>> 2016-02-27 17:05:03.029 | + ./devstack/stack.sh:exit_trap:L486: [[ 1 -ne 0 ]]
>>>> 2016-02-27 17:05:03.029 | + ./devstack/stack.sh:exit_trap:L487: echo 'Error on exit'
>>>> 2016-02-27 17:05:03.029 | Error on exit
>>>> 2016-02-27 17:05:03.029 | + ./devstack/stack.sh:exit_trap:L488: generate-subunit 1456592181 522 fail
>>>> 2016-02-27 17:05:03.375 | + ./devstack/stack.sh:exit_trap:L489: [[ -z /opt/stack/logs ]]
>>>> 2016-02-27 17:05:03.375 | + ./devstack/stack.sh:exit_trap:L492: /home/stack/devstack/tools/worlddump.py -d /opt/stack/logs
>>>> stack at node2:~$ 2016-02-27 17:05:03.843 | + ./devstack/stack.sh:exit_trap:L498: exit 1
>>>>
>>>>
>>>> Best Regards
>>>>
>>>> Pengfei Shi (时鹏飞)
>>>> Shanghai Jiao Tong University
>>>> Network & Information Center Room 304
>>>>
>>>> shipengfei92 at gmail.com <mailto:shipengfei92 at gmail.com>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Feb 24, 2016, at 9:29 AM, Yipei Niu <newypei at gmail.com <mailto:newypei at gmail.com>> wrote:
>>>>
>>>> Hi Joe and Zhiyuan,
>>>>
>>>> My VM has recovered. When I re-install devstack in node1, I encounter the following errors.
>>>>
>>>> The info in stack.sh.log is as follows:
>>>>
>>>> 2016-02-23 11:18:27.238 | Error: Service n-sch is not running
>>>> 2016-02-23 11:18:27.238 | + /home/stack/devstack/functions-common:service_check:L1625: '[' -n /opt/stack/status/stack/n-sch.failure ']'
>>>> 2016-02-23 11:18:27.238 | + /home/stack/devstack/functions-common:service_check:L1626: die 1626 'More details about the above errors can be found with screen, with ./rejoin-stack.sh'
>>>> 2016-02-23 11:18:27.238 | + /home/stack/devstack/functions-common:die:L186: local exitcode=0
>>>> 2016-02-23 11:18:27.239 | [Call Trace]
>>>> 2016-02-23 11:18:27.239 | ./stack.sh:1354:service_check
>>>> 2016-02-23 11:18:27.239 | /home/stack/devstack/functions-common:1626:die
>>>> 2016-02-23 11:18:27.261 | [ERROR] /home/stack/devstack/functions-common:1626 More details about the above errors can be found with screen, with ./rejoin-stack.sh
>>>> 2016-02-23 11:18:28.271 | Error on exit
>>>> 2016-02-23 11:18:28.953 | df: '/run/user/112/gvfs': Permission denied
>>>>
>>>> The info in n-sch.log is as follows:
>>>>
>>>> stack at nyp-VirtualBox:~/devstack$ /usr/local/bin/nova-scheduler --config-file /et ^Mc/nova/nova.conf & echo $! >/opt/stack/status/stack/n-sch.pid; fg || echo "n-sch ^M failed to start" | tee "/opt/stack/status/stack/n-sch.failure"
>>>> [1] 29467
>>>> /usr/local/bin/nova-scheduler --config-file /etc/nova/nova.conf
>>>> 2016-02-23 19:13:00.050 ^[[00;32mDEBUG oslo_db.api [^[[00;36m-^[[00;32m] ^[[01;35m^[[00;32mLoading backend 'sqlalchemy' from 'nova.db.sqlalchemy.api'^[[00m ^[[00;33mfrom (pid=29467) _load_backend /usr/local/lib/python2.7/dist-packages/oslo_db/api.py:238^[[00m
>>>> 2016-02-23 19:13:00.300 ^[[01;33mWARNING oslo_reports.guru_meditation_report [^[[00;36m-^[[01;33m] ^[[01;35m^[[01;33mGuru mediation now registers SIGUSR1 and SIGUSR2 by default for backward compatibility. SIGUSR1 will no longer be registered in a future release, so please use SIGUSR2 to generate reports.^[[00m
>>>> 2016-02-23 19:13:00.304 ^[[01;31mCRITICAL nova [^[[00;36m-^[[01;31m] ^[[01;35m^[[01;31mValueError: Empty module name
>>>> ^[[00m
>>>> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00mTraceback (most recent call last):
>>>> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m File "/usr/local/bin/nova-scheduler", line 10, in <module>
>>>> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m sys.exit(main())
>>>> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m File "/opt/stack/nova/nova/cmd/scheduler.py", line 43, in main
>>>> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m topic=CONF.scheduler_topic)
>>>> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m File "/opt/stack/nova/nova/service.py", line 281, in create
>>>> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m db_allowed=db_allowed)
>>>> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m File "/opt/stack/nova/nova/service.py", line 167, in __init__
>>>> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m self.manager = manager_class(host=self.host, *args, **kwargs)
>>>> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m File "/opt/stack/nova/nova/scheduler/manager.py", line 49, in __init__
>>>> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m self.driver = importutils.import_object(scheduler_driver)
>>>> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m File "/usr/local/lib/python2.7/dist-packages/oslo_utils/importutils.py", line 44, in import_object
>>>> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m return import_class(import_str)(*args, **kwargs)
>>>> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m File "/usr/local/lib/python2.7/dist-packages/oslo_utils/importutils.py", line 30, in import_class
>>>> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m __import__(mod_str)
>>>> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00mValueError: Empty module name
>>>> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m
>>>> n-sch failed to start
>>>>
>>>>
>>>> Best regards,
>>>> Yipei
>>>>
>>>> On Tue, Feb 23, 2016 at 10:23 AM, Yipei Niu <newypei at gmail.com <mailto:newypei at gmail.com>> wrote:
>>>> Hi Jeo,
>>>>
>>>> I have checked. The Neutron API has not started, but no process is listening 9696.
>>>>
>>>> Best regards,
>>>> Yipei
>>>>
>>>> __________________________________________________________________________
>>>> OpenStack Development Mailing List (not for usage questions)
>>>> Unsubscribe: OpenStack-dev-request at lists.openstack.org <mailto:OpenStack-dev-request at lists.openstack.org>?subject:unsubscribe
>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev <http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev>
>>>>
>>>> __________________________________________________________________________
>>>> OpenStack Development Mailing List (not for usage questions)
>>>> Unsubscribe: OpenStack-dev-request at lists.openstack.org <mailto:OpenStack-dev-request at lists.openstack.org>?subject:unsubscribe
>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev <http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev>
>>
>>
>> __________________________________________________________________________
>> OpenStack Development Mailing List (not for usage questions)
>> Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe <http://OpenStack-dev-request@lists.openstack.org/?subject:unsubscribe>
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev <http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev>
>>
>>
>>
>> __________________________________________________________________________
>> OpenStack Development Mailing List (not for usage questions)
>> Unsubscribe: OpenStack-dev-request at lists.openstack.org <mailto:OpenStack-dev-request at lists.openstack.org>?subject:unsubscribe
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev <http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20160302/7c4bb689/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PastedGraphic-4.png
Type: image/png
Size: 101314 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20160302/7c4bb689/attachment-0001.png>
More information about the OpenStack-dev
mailing list
