[openstack-dev] [tricircle] playing tricircle with devstack under two-region configuration
时鹏飞
shipengfei92 at gmail.com
Mon Feb 29 04:55:18 UTC 2016
Hi, Joe and Zhiyuan
Sorry for bother you again.
When I finish install two cross pod nodes and try ping command, it cannot reply.
In vm1: ip:10.0.1.3
ping 10.0.1.1 gateway is OK;
ping 10.0.2.3(vm2) no reply.
In vm2: ip:10.0.2.3
ping 10.0.2.1 gateway is OK;
ping 10.0.1.3(vm1) no reply.
And I use wireshark to capture the flows in internal VLAN network:
I find that, the Ping has reply, but it cannot be recognised.
Is the problems caused by ew_bridge_net?
some info as the below:
stack at node1:~$ neutron net-list
+--------------------------------------+------------------------------------------------+-----------------------------------------------------+
| id | name | subnets |
+--------------------------------------+------------------------------------------------+-----------------------------------------------------+
| e268445b-398f-40c0-ba03-6ebcc33a64a7 | ext-net | b50d19d5-435e-4c46-a8fc-cdfc02fbdd29 10.50.11.0/26 |
| 0828b209-71a0-481e-9e2c-5c68d2b18387 | ew_bridge_net_f55068b6dcfd4b4d9d357b46eedc6644 | 34405fae-e796-48ae-a6e7-f7943b84a117 100.0.0.0/24 |
| 38066909-c315-41d0-a83e-11aebab1c51d | net2 | aeb34101-0e0f-402c-94a4-e4d45235d531 10.0.2.0/24 |
| acb5039a-c076-49ff-9db6-3879630dc531 | net1 | 6a1cafcd-6bc7-4788-8a38-b26616dd43a4 10.0.1.0/24 |
| afd0ea21-8e0e-4951-97bb-296c18e2ed6a | ns_bridge_net_f55068b6dcfd4b4d9d357b46eedc6644 | a241e73f-8ae6-4a9f-9e03-445f70a11629 100.128.0.0/24 |
+--------------------------------------+------------------------------------------------+-----------------------------------------------------+
stack at node1:~$ neutron port-list
+--------------------------------------+--------------------------------------+-------------------+----------------------------------------------------------+
| id | name | mac_address | fixed_ips |
+--------------------------------------+--------------------------------------+-------------------+----------------------------------------------------------+
| 5ff4f7c4-5e47-4cc5-8a17-e011938bd930 | 5ff4f7c4-5e47-4cc5-8a17-e011938bd930 | fa:16:3e:d0:1e:8e | {"subnet_id": "aeb34101-0e0f-402c-94a4-e4d45235d531", |
| | | | "ip_address": "10.0.2.3"} |
| 4f2fb455-8cc5-43ea-87cd-4d4d845548a0 | 4f2fb455-8cc5-43ea-87cd-4d4d845548a0 | fa:16:3e:ed:d2:49 | {"subnet_id": "aeb34101-0e0f-402c-94a4-e4d45235d531", |
| | | | "ip_address": "10.0.2.1"} |
| 67e16de6-ad02-4e5f-b035-6525a5a6dcc4 | | fa:16:3e:c6:07:65 | {"subnet_id": "aeb34101-0e0f-402c-94a4-e4d45235d531", |
| | | | "ip_address": "10.0.2.2"} |
| 15cc5862-443f-44a0-a060-33a66b0686cc | 15cc5862-443f-44a0-a060-33a66b0686cc | fa:16:3e:b9:2c:14 | {"subnet_id": "34405fae-e796-48ae-a6e7-f7943b84a117", |
| | | | "ip_address": "100.0.0.3"} |
| 5367f76e-6a00-478d-b9b8-54d0b4754da7 | 5367f76e-6a00-478d-b9b8-54d0b4754da7 | fa:16:3e:01:70:36 | {"subnet_id": "34405fae-e796-48ae-a6e7-f7943b84a117", |
| | | | "ip_address": "100.0.0.2"} |
| 1be92584-a800-474f-a105-877e8a30875f | 1be92584-a800-474f-a105-877e8a30875f | fa:16:3e:5d:0d:59 | {"subnet_id": "6a1cafcd-6bc7-4788-8a38-b26616dd43a4", |
| | | | "ip_address": "10.0.1.3"} |
| fda27c48-ce7c-4852-b9f6-4af7da2d0b3d | fda27c48-ce7c-4852-b9f6-4af7da2d0b3d | fa:16:3e:26:f3:40 | {"subnet_id": "6a1cafcd-6bc7-4788-8a38-b26616dd43a4", |
| | | | "ip_address": "10.0.1.1"} |
| 7b51933e-edb4-4210-9df4-e346fe99fded | | fa:16:3e:8f:d7:ad | {"subnet_id": "6a1cafcd-6bc7-4788-8a38-b26616dd43a4", |
| | | | "ip_address": "10.0.1.2"} |
| 4b5a8392-abfc-4261-b98f-e39e377991a7 | | fa:16:3e:ae:bc:4d | "<neutron.db.models_v2.IPAllocation[object at |
| | | | 7f9d252aad90] {port_id=u'4b5a8392-abfc-4261-b98f- |
| | | | e39e377991a7', ip_address=u'10.50.11.30', |
| | | | subnet_id=u'b50d19d5-435e-4c46-a8fc-cdfc02fbdd29', |
| | | | network_id=u'e268445b-398f-40c0-ba03-6ebcc33a64a7'}>" |
| aee04b98-4dfb-431a-8b8f-50c1f6a67fc6 | | fa:16:3e:3e:d8:ac | "<neutron.db.models_v2.IPAllocation[object at |
| | | | 7f9d2174a710] {port_id=u'aee04b98-4dfb-431a-8b8f- |
| | | | 50c1f6a67fc6', ip_address=u'10.50.11.31', |
| | | | subnet_id=u'b50d19d5-435e-4c46-a8fc-cdfc02fbdd29', |
| | | | network_id=u'e268445b-398f-40c0-ba03-6ebcc33a64a7'}>" |
+--------------------------------------+--------------------------------------+-------------------+----------------------------------------------------------+
Best Regards
Pengfei Shi (时鹏飞)
Shanghai Jiao Tong University
Network & Information Center Room 304
shipengfei92 at gmail.com
> On Feb 29, 2016, at 8:36 AM, joehuang <joehuang at huawei.com> wrote:
>
> Hi, Pengfei,
>
> Volume type is not supported in Tricircle yet.
>
> Best Regards
> Chaoyi Huang ( Joe Huang )
>
> From: 时鹏飞 [mailto:shipengfei92 at gmail.com]
> Sent: Sunday, February 28, 2016 9:36 AM
> To: OpenStack Development Mailing List (not for usage questions)
> Subject: Re: [openstack-dev] [tricircle] playing tricircle with devstack under two-region configuration
>
> Hi,Joe and Zhiyuan,
>
> When I install the devstack in Node2, it occur errors when test cinder_volume_types:
>
> 2016-02-27 17:05:00.920 | + ./devstack/stack.sh:main:L1267: create_volume_types
> 2016-02-27 17:05:00.920 | + /home/stack/devstack/lib/cinder:create_volume_types:L549: is_service_enabled c-api
> 2016-02-27 17:05:00.927 | + /home/stack/devstack/functions-common:is_service_enabled:L2026: return 0
> 2016-02-27 17:05:00.927 | + /home/stack/devstack/lib/cinder:create_volume_types:L549: [[ -n lvm:lvmdriver-1 ]]
> 2016-02-27 17:05:00.927 | + /home/stack/devstack/lib/cinder:create_volume_types:L550: local be be_name
> 2016-02-27 17:05:00.928 | + /home/stack/devstack/lib/cinder:create_volume_types:L551: for be in '${CINDER_ENABLED_BACKENDS//,/ }'
> 2016-02-27 17:05:00.928 | + /home/stack/devstack/lib/cinder:create_volume_types:L552: be_name=lvmdriver-1
> 2016-02-27 17:05:00.928 | + /home/stack/devstack/lib/cinder:create_volume_types:L553: openstack volume type create --property volume_backend_name=lvmdriver-1 lvmdriver-1
> 2016-02-27 17:05:02.937 | Unable to establish connection tohttp://10.50.11.5:19997/v2/00d182cbe7664762809f4f5a0866635d/types <http://10.50.11.5:19997/v2/00d182cbe7664762809f4f5a0866635d/types>
> 2016-02-27 17:05:03.025 | + /home/stack/devstack/lib/cinder:create_volume_types:L1: exit_trap
> 2016-02-27 17:05:03.025 | + ./devstack/stack.sh:exit_trap:L474: local r=1
> 2016-02-27 17:05:03.027 | ++ ./devstack/stack.sh:exit_trap:L475: jobs -p
> 2016-02-27 17:05:03.028 | + ./devstack/stack.sh:exit_trap:L475: jobs=
> 2016-02-27 17:05:03.028 | + ./devstack/stack.sh:exit_trap:L478: [[ -n '' ]]
> 2016-02-27 17:05:03.028 | + ./devstack/stack.sh:exit_trap:L484: kill_spinner
> 2016-02-27 17:05:03.028 | + ./devstack/stack.sh:kill_spinner:L370: '[' '!' -z '' ']'
> 2016-02-27 17:05:03.029 | + ./devstack/stack.sh:exit_trap:L486: [[ 1 -ne 0 ]]
> 2016-02-27 17:05:03.029 | + ./devstack/stack.sh:exit_trap:L487: echo 'Error on exit'
> 2016-02-27 17:05:03.029 | Error on exit
> 2016-02-27 17:05:03.029 | + ./devstack/stack.sh:exit_trap:L488: generate-subunit 1456592181 522 fail
> 2016-02-27 17:05:03.375 | + ./devstack/stack.sh:exit_trap:L489: [[ -z /opt/stack/logs ]]
> 2016-02-27 17:05:03.375 | + ./devstack/stack.sh:exit_trap:L492: /home/stack/devstack/tools/worlddump.py -d /opt/stack/logs
> stack at node2:~$ 2016-02-27 17:05:03.843 | + ./devstack/stack.sh:exit_trap:L498: exit 1
>
>
> Best Regards
>
> Pengfei Shi (时鹏飞)
> Shanghai Jiao Tong University
> Network & Information Center Room 304
>
> shipengfei92 at gmail.com <mailto:shipengfei92 at gmail.com>
>
>
>
>
>
> On Feb 24, 2016, at 9:29 AM, Yipei Niu <newypei at gmail.com <mailto:newypei at gmail.com>> wrote:
>
> Hi Joe and Zhiyuan,
>
> My VM has recovered. When I re-install devstack in node1, I encounter the following errors.
>
> The info in stack.sh.log is as follows:
>
> 2016-02-23 11:18:27.238 | Error: Service n-sch is not running
> 2016-02-23 11:18:27.238 | + /home/stack/devstack/functions-common:service_check:L1625: '[' -n /opt/stack/status/stack/n-sch.failure ']'
> 2016-02-23 11:18:27.238 | + /home/stack/devstack/functions-common:service_check:L1626: die 1626 'More details about the above errors can be found with screen, with ./rejoin-stack.sh'
> 2016-02-23 11:18:27.238 | + /home/stack/devstack/functions-common:die:L186: local exitcode=0
> 2016-02-23 11:18:27.239 | [Call Trace]
> 2016-02-23 11:18:27.239 | ./stack.sh:1354:service_check
> 2016-02-23 11:18:27.239 | /home/stack/devstack/functions-common:1626:die
> 2016-02-23 11:18:27.261 | [ERROR] /home/stack/devstack/functions-common:1626 More details about the above errors can be found with screen, with ./rejoin-stack.sh
> 2016-02-23 11:18:28.271 | Error on exit
> 2016-02-23 11:18:28.953 | df: '/run/user/112/gvfs': Permission denied
>
> The info in n-sch.log is as follows:
>
> stack at nyp-VirtualBox:~/devstack$ /usr/local/bin/nova-scheduler --config-file /et ^Mc/nova/nova.conf & echo $! >/opt/stack/status/stack/n-sch.pid; fg || echo "n-sch ^M failed to start" | tee "/opt/stack/status/stack/n-sch.failure"
> [1] 29467
> /usr/local/bin/nova-scheduler --config-file /etc/nova/nova.conf
> 2016-02-23 19:13:00.050 ^[[00;32mDEBUG oslo_db.api [^[[00;36m-^[[00;32m] ^[[01;35m^[[00;32mLoading backend 'sqlalchemy' from 'nova.db.sqlalchemy.api'^[[00m ^[[00;33mfrom (pid=29467) _load_backend /usr/local/lib/python2.7/dist-packages/oslo_db/api.py:238^[[00m
> 2016-02-23 19:13:00.300 ^[[01;33mWARNING oslo_reports.guru_meditation_report [^[[00;36m-^[[01;33m] ^[[01;35m^[[01;33mGuru mediation now registers SIGUSR1 and SIGUSR2 by default for backward compatibility. SIGUSR1 will no longer be registered in a future release, so please use SIGUSR2 to generate reports.^[[00m
> 2016-02-23 19:13:00.304 ^[[01;31mCRITICAL nova [^[[00;36m-^[[01;31m] ^[[01;35m^[[01;31mValueError: Empty module name
> ^[[00m
> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00mTraceback (most recent call last):
> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m File "/usr/local/bin/nova-scheduler", line 10, in <module>
> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m sys.exit(main())
> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m File "/opt/stack/nova/nova/cmd/scheduler.py", line 43, in main
> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m topic=CONF.scheduler_topic)
> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m File "/opt/stack/nova/nova/service.py", line 281, in create
> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m db_allowed=db_allowed)
> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m File "/opt/stack/nova/nova/service.py", line 167, in __init__
> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m self.manager = manager_class(host=self.host, *args, **kwargs)
> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m File "/opt/stack/nova/nova/scheduler/manager.py", line 49, in __init__
> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m self.driver = importutils.import_object(scheduler_driver)
> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m File "/usr/local/lib/python2.7/dist-packages/oslo_utils/importutils.py", line 44, in import_object
> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m return import_class(import_str)(*args, **kwargs)
> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m File "/usr/local/lib/python2.7/dist-packages/oslo_utils/importutils.py", line 30, in import_class
> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m __import__(mod_str)
> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00mValueError: Empty module name
> ^[[01;31m2016-02-23 19:13:00.304 TRACE nova ^[[01;35m^[[00m
> n-sch failed to start
>
>
> Best regards,
> Yipei
>
> On Tue, Feb 23, 2016 at 10:23 AM, Yipei Niu <newypei at gmail.com <mailto:newypei at gmail.com>> wrote:
> Hi Jeo,
>
> I have checked. The Neutron API has not started, but no process is listening 9696.
>
> Best regards,
> Yipei
>
> __________________________________________________________________________
> OpenStack Development Mailing List (not for usage questions)
> Unsubscribe: OpenStack-dev-request at lists.openstack.org <mailto:OpenStack-dev-request at lists.openstack.org>?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev <http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev>
>
> __________________________________________________________________________
> OpenStack Development Mailing List (not for usage questions)
> Unsubscribe: OpenStack-dev-request at lists.openstack.org <mailto:OpenStack-dev-request at lists.openstack.org>?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev <http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20160229/39cd4872/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PastedGraphic-1.tiff
Type: image/tiff
Size: 321080 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20160229/39cd4872/attachment-0002.tiff>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PastedGraphic-2.tiff
Type: image/tiff
Size: 346660 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20160229/39cd4872/attachment-0003.tiff>
More information about the OpenStack-dev
mailing list