Open Stack

That job is non-voting, which since you're adding a new datasource, you can
ignore.  Nothing to do now but wait for people to give you reviews.

Tim

On Mon, Dec 12, 2016 at 1:12 PM Ruben <r.manganiello1 at studenti.unisa.it>
wrote:

> Hi Tim,
> thanks a lot for your help.
> I've seen that there is a failure for "gate-congress-pe-replicated-nv".
> It's strange because I didn't have failure before.
> So, what should I do now?
>
> Ruben
>
> ----- Messaggio originale -----
> Da: "Tim Hinrichs" <tim at styra.com>
> A: "Ruben" <r.manganiello1 at studenti.unisa.it>
> Cc: openstack-dev at lists.openstack.org, "timothy l hinrichs" <
> timothy.l.hinrichs at gmail.com>
> Inviato: Lunedì, 12 dicembre 2016 19:58:24
> Oggetto: Re: [Congress] Magnum_driver
>
> Hi Ruben,
>
> Looked like there were still multiple changes, so I squashed them into 1
> and fixed up the requirements.txt file.  (You should only need to add the
> python-magnumclient to the requirements.txt file.)  I also abandoned one
> that was incorporated into the one 1 fix.  Here it is.  Now the community
> should give you reviews.
>
> https://review.openstack.org/#/c/404222
>
> Tim
>
>
>
>
> On Fri, Dec 9, 2016 at 3:06 PM Ruben <r.manganiello1 at studenti.unisa.it>
> wrote:
>
> > Hi Tim,
> > sorry for the late, but I've had a busy week.
> > Anyway, I've tried to add the magnum_driver to review into a single
> commit.
> > I don't know if I have been able..
> >
> > Ruben
> >
> > ----- Messaggio originale -----
> > Da: "Tim Hinrichs" <tim at styra.com>
> > A: "Ruben" <r.manganiello1 at studenti.unisa.it>
> > Cc: openstack-dev at lists.openstack.org, "timothy l hinrichs" <
> > timothy.l.hinrichs at gmail.com>
> > Inviato: Mercoledì, 30 novembre 2016 22:04:32
> > Oggetto: Re: [Congress] Magnum_driver
> >
> > Hi Ruben,
> >
> > What you're doing is correct.  The downside is that it creates a new
> commit
> > for every change you make, and all of those commits show up on gerrit.
> In
> > OpenStack (and other projects I've seen that use Gerrit for code reviews)
> > you squash those commits into 1 change so that it's easier for reviewers
> to
> > see the change as a whole.  (Projects that use Github for code reviews do
> > more like what you're doing now).  To see your
> >
> > Here's a blog showing you what to do...
> > https://ariejan.net/2011/07/05/git-squash-your-latests-commits-into-one/
> >
> > You can probably do
> >
> > $ git rebase -i
> >
> > and then follow the instructions in the blog that say you replace the
> > 'pick' for all the commits after the first with 'squash' (or 's' for
> > short).  So something like the following.
> >
> > pick f392171 Added new feature X squash ba9dd9a Added new elements to
> page
> > design squash df71a27 Updated CSS for new elements
> >
> > After that, you should be able to do ...
> >
> > $ git review
> >
> > Tim
> >
> > On Wed, Nov 30, 2016 at 5:23 AM Ruben <r.manganiello1 at studenti.unisa.it>
> > wrote:
> >
> > > Hi Tim,
> > > what should I do to squash all the commits into a single one?
> > >
> > > To add the code to review I made:
> > >
> > > git add <file>
> > > git commit
> > > git review
> > >
> > > Isn't it correct?
> > >
> > > Ruben
> > >
> > > ----- Messaggio originale -----
> > > Da: "Tim Hinrichs" <tim at styra.com>
> > > A: "Ruben" <r.manganiello1 at studenti.unisa.it>
> > > Cc: openstack-dev at lists.openstack.org, "timothy l hinrichs" <
> > > timothy.l.hinrichs at gmail.com>
> > > Inviato: Mercoledì, 30 novembre 2016 2:34:22
> > > Oggetto: Re: [Congress] Magnum_driver
> > >
> > > Hi Ruben,
> > >
> > > I left a comment on one of the changes; after you take care of that
> I'll
> > > take a closer look at the code.  Let me know if you have questions.
> > >
> > > Tim
> > >
> > > On Tue, Nov 29, 2016 at 4:06 AM Ruben <
> r.manganiello1 at studenti.unisa.it>
> > > wrote:
> > >
> > > > Hi Tim,
> > > > I've added the code of magnum_driver and its unit test to review.
> > > > It seems everything works.
> > > >
> > > > Ruben
> > > >
> > > > ----- Original Message -----
> > > > From: "Tim Hinrichs" <tim at styra.com>
> > > > To: "Ruben" <r.manganiello1 at studenti.unisa.it>
> > > > Cc: openstack-dev at lists.openstack.org, "timothy l hinrichs" <
> > > > timothy.l.hinrichs at gmail.com>
> > > > Sent: Saturday, November 26, 2016 12:48:12 AM
> > > > Subject: Re: [Congress] Magnum_driver
> > > >
> > > > Definitely push that code up into Gerrit so we can all take a look.
> > Data
> > > > like pods and containers is probably the most valuable data from
> > Magnum,
> > > so
> > > > I'd definitely recommend adding that.  But push the code you have to
> > > Gerrit
> > > > first.  (As long as you leave the ChangeId the same each time you
> push
> > to
> > > > Gerrit, Gerrit will keep all of the versions you pushed organized
> > > together,
> > > > yet keep the versions separate.)
> > > >
> > > > Tim
> > > >
> > > > On Fri, Nov 25, 2016 at 3:06 PM Ruben <
> > r.manganiello1 at studenti.unisa.it>
> > > > wrote:
> > > >
> > > > > Hi Tim,
> > > > > You are great. It works! Thanks a lot!
> > > > > I've also solved the problem with py27. The unit test seems to
> work.
> > > > > The only thing that seems not to work is populate the
> > 'clusters_links'
> > > > and
> > > > > 'cluster_templates_links' tables: they are empty.
> > > > > Also, the 'labels' table is empty.
> > > > > I've no errors anyway.
> > > > > Are these problems according to you?
> > > > >
> > > > > Should I to try to add the translation of pods, containers and
> > > services?
> > > > >
> > > > > I've add the code to review.
> > > > >
> > > > > Ruben
> > > > > ----- Original Message -----
> > > > > From: "Tim Hinrichs" <tim at styra.com>
> > > > > To: "Ruben" <r.manganiello1 at studenti.unisa.it>
> > > > > Cc: openstack-dev at lists.openstack.org, "timothy l hinrichs" <
> > > > > timothy.l.hinrichs at gmail.com>
> > > > > Sent: Friday, November 25, 2016 10:36:29 PM
> > > > > Subject: Re: [Congress] Magnum_driver
> > > > >
> > > > > Hi Ruben,
> > > > >
> > > > > Glad you got that worked out.  Once in a while I end up deleting my
> > > .tox
> > > > > dir because it gets out of date.  I guess that's what the
> --recreate
> > > > option
> > > > > to tox does.  So I learned something.  :)
> > > > >
> > > > > The new error message looks to be saying that an object of type
> > > 'Cluster'
> > > > > cannot be iterated.  Congress's _translate_clusters method assumes
> > that
> > > > > what you give it is basically JSON (arrays, dictionaries, numbers,
> > > > strings,
> > > > > bools).   In this case Congress is trying to iterate over the keys
> > of a
> > > > > dictionary but is getting a 'Cluster' Python object instead.
> What's
> > > > > happening is that when you do the cluster.list() (or whatever it's
> > > > called)
> > > > > on the magnum-python you're getting back a list of Cluster Python
> > > objects
> > > > > instead of a list of dictionaries.
> > > > >
> > > > > To fix the problem, you'll want to take the results of
> cluster.list()
> > > and
> > > > > translate it into a list of dictionaries, and then hand that off to
> > > > > _translate_clusters.  Probably you'll need to do the same for the
> > > > > cluster_template.  So instead of ...
> > > > >
> > > > >         clusters_method = lambda: self._translate_clusters(
> > > > >             {'clusters': self.magnum.clusters.list()})
> > > > >
> > > > > You'll want to do something like ...
> > > > >
> > > > >         clusters_method = lambda: self._translate_clusters(
> > > > >             {'clusters': [x.__dict__ for x in
> > > > self.magnum.clusters.list()]
> > > > >  })
> > > > >
> > > > > Or at least, that's what I'd start trying.  __dict__ grabs all the
> > > fields
> > > > > of an object and returns a dictionary.  (If some of the values of
> > that
> > > > > dictionary are also Python objects, then you might need something
> > > that's
> > > > > more complicated to recursively walk the result of clusters.list()
> > and
> > > > > translate everything into lists and dictionaries.  And I'm not sure
> > > that
> > > > > __dict__ will give you exactly what you want, but it's worth a
> try.).
> > > > >
> > > > > Tim
> > > > >
> > > > >
> > > > > On Thu, Nov 24, 2016 at 12:11 PM Ruben <
> > > r.manganiello1 at studenti.unisa.it
> > > > >
> > > > > wrote:
> > > > >
> > > > > > Hi Tim,
> > > > > > I solved the problem with:
> > > > > >
> > > > > > tox --recreate -e py27
> > > > > >
> > > > > > Now I no have the error on the import. The unit test still has
> some
> > > > > > errors, but I don't know why..
> > > > > >
> > > > > > Anyway, I've this error when I try to add the magnum_driver:
> > > > > >
> > > > > > 2016-11-24 20:56:27.191 INFO
> congress.datasources.datasource_driver
> > > [-]
> > > > > > magnum:: polling
> > > > > > 2016-11-24 20:56:27.192 DEBUG
> > congress.datasources.datasource_driver
> > > > [-]
> > > > > > update table clusters. from (pid=18720) update_from_datasource
> > > > > >
> /opt/stack/congress/congress/datasources/datasource_driver.py:1370
> > > > > > 2016-11-24 20:56:27.427 DEBUG congress.datasources.magnum_driver
> > [-]
> > > > > > CLUSTERS: {'clusters': [<Clusters {u'status': u'CREATE_FAILED',
> > > > > > u'cluster_template_id': u'8d25a1ed-faa6-4305-a6a1-6559708c805b',
> > > > u'uuid':
> > > > > > u'1634beb9-25de-4cdd-bafa-67537069f0cc', u'links': [{u'href': u'
> > > > > >
> > > http://10.0.2.15:9511/v1/clusters/1634beb9-25de-4cdd-bafa-67537069f0cc
> > > > ',
> > > > > > u'rel': u'self'}, {u'href': u'
> > > > > >
> > http://10.0.2.15:9511/clusters/1634beb9-25de-4cdd-bafa-67537069f0cc
> > > ',
> > > > > > u'rel': u'bookmark'}], u'stack_id':
> > > > > > u'17f1248d-286a-4fd4-9639-af5773670f03', u'master_count': 1,
> > > > u'keypair':
> > > > > > u'testkey', u'node_count': 1, u'create_timeout': 60, u'name':
> > > > > > u'k8s-cluster'}>]} from (pid=18720) _translate_clusters
> > > > > > /opt/stack/congress/congress/datasources/magnum_driver.py:165
> > > > > > 2016-11-24 20:56:27.435 ERROR
> > congress.datasources.datasource_driver
> > > > [-]
> > > > > > Datasource driver raised exception
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > > Traceback (most recent call last):
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  File
> > > "/opt/stack/congress/congress/datasources/datasource_driver.py",
> > > > > line
> > > > > > 1384, in poll
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  self.update_from_datasource()  # sets self.state
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  File
> > > "/opt/stack/congress/congress/datasources/datasource_driver.py",
> > > > > line
> > > > > > 1371, in update_from_datasource
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  self.update_methods[registered_table]()
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  File
> "/opt/stack/congress/congress/datasources/magnum_driver.py",
> > > line
> > > > > > 150, in <lambda>
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  {'clusters': self.magnum.clusters.list()})
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  File
> > "/opt/stack/congress/congress/datasources/datasource_utils.py",
> > > > > line
> > > > > > 57, in inner
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  result = f(self, raw_data, *args, **kw)
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  File
> "/opt/stack/congress/congress/datasources/magnum_driver.py",
> > > line
> > > > > > 167, in _translate_clusters
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  obj['clusters'], MagnumDriver.clusters_translator)
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  File
> > > "/opt/stack/congress/congress/datasources/datasource_driver.py",
> > > > > line
> > > > > > 1048, in convert_objs
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  rows, _ = DataSourceDriver.convert_obj(o, translator)
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  File
> > > "/opt/stack/congress/congress/datasources/datasource_driver.py",
> > > > > line
> > > > > > 1021, in convert_obj
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  parent_row_dict)
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  File
> > > "/opt/stack/congress/congress/datasources/datasource_driver.py",
> > > > > line
> > > > > > 994, in _populate_translator_data_hdict
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  return cls._populate_hdict(translator, obj, parent_row_dict)
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  File
> > > "/opt/stack/congress/congress/datasources/datasource_driver.py",
> > > > > line
> > > > > > 924, in _populate_hdict
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  cls._get_value(obj, field, selector), extract_fn)
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  File
> > > "/opt/stack/congress/congress/datasources/datasource_driver.py",
> > > > > line
> > > > > > 693, in _get_value
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > >  if field in o:
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > > TypeError: argument of type 'Cluster' is not iterable
> > > > > > 2016-11-24 20:56:27.435 TRACE
> > congress.datasources.datasource_driver
> > > > > > 2016-11-24 20:56:27.435 INFO
> congress.datasources.datasource_driver
> > > [-]
> > > > > > magnum:: finished polling
> > > > > >
> > > > > >
> > > > > > Any suggestions to solve it?
> > > > > > I've add the code to review.
> > > > > >
> > > > > > Ruben
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "Ruben" <r.manganiello1 at studenti.unisa.it>
> > > > > > To: "Tim Hinrichs" <tim at styra.com>
> > > > > > Cc: openstack-dev at lists.openstack.org, "timothy l hinrichs" <
> > > > > > timothy.l.hinrichs at gmail.com>
> > > > > > Sent: Thursday, November 24, 2016 12:44:38 AM
> > > > > > Subject: Re: [Congress] Magnum_driver
> > > > > >
> > > > > > Hi Tim,
> > > > > > I already have 'pyhton-magnumclient' in the requirements.txt
> file,
> > > but
> > > > I
> > > > > > still have the error.
> > > > > >
> > > > > > This is the /opt/stack/congress/requirements.txt file:
> > > > > >
> > > > > > "# The order of packages is significant, because pip processes
> them
> > > in
> > > > > the
> > > > > > order
> > > > > > # of appearance. Changing the order has an impact on the overall
> > > > > > integration
> > > > > > # process, which may cause wedges in the gate later.
> > > > > >
> > > > > > Babel>=2.3.4 # BSD
> > > > > > eventlet!=0.18.3,>=0.18.2 # MIT
> > > > > > PuLP>=1.4.1 # MIT
> > > > > > keystoneauth1>=2.14.0 # Apache-2.0
> > > > > > keystonemiddleware!=4.5.0,>=4.2.0 # Apache-2.0
> > > > > > Paste # MIT
> > > > > > PasteDeploy>=1.5.0 # MIT
> > > > > > pbr>=1.6 # Apache-2.0
> > > > > > python-keystoneclient>=3.6.0 # Apache-2.0
> > > > > > python-heatclient>=1.5.0 # Apache-2.0
> > > > > > python-magnumclient
> > > > > > python-muranoclient>=0.8.2 # Apache-2.0
> > > > > > python-novaclient!=2.33.0,>=2.29.0 # Apache-2.0
> > > > > > python-neutronclient>=5.1.0 # Apache-2.0
> > > > > > python-ceilometerclient>=2.5.0 # Apache-2.0
> > > > > > python-cinderclient!=1.7.0,!=1.7.1,>=1.6.0 # Apache-2.0
> > > > > > python-swiftclient>=2.2.0 # Apache-2.0
> > > > > > python-ironicclient>=1.6.0 # Apache-2.0
> > > > > > alembic>=0.8.4 # MIT
> > > > > > python-dateutil>=2.4.2 # BSD
> > > > > > python-glanceclient>=2.5.0 # Apache-2.0
> > > > > > Routes!=2.0,!=2.1,!=2.3.0,>=1.12.3;python_version=='2.7' # MIT
> > > > > > Routes!=2.0,!=2.3.0,>=1.12.3;python_version!='2.7' # MIT
> > > > > > six>=1.9.0 # MIT
> > > > > > oslo.concurrency>=3.8.0 # Apache-2.0
> > > > > > oslo.config!=3.18.0,>=3.14.0 # Apache-2.0
> > > > > > oslo.context>=2.9.0 # Apache-2.0
> > > > > > oslo.db!=4.13.1,!=4.13.2,>=4.11.0 # Apache-2.0
> > > > > > oslo.messaging>=5.2.0 # Apache-2.0
> > > > > > oslo.policy>=1.15.0 # Apache-2.0
> > > > > > oslo.serialization>=1.10.0 # Apache-2.0
> > > > > > oslo.service>=1.10.0 # Apache-2.0
> > > > > > oslo.utils>=3.18.0 # Apache-2.0
> > > > > > oslo.middleware>=3.0.0 # Apache-2.0
> > > > > > oslo.vmware>=2.11.0 # Apache-2.0
> > > > > > oslo.log>=3.11.0 # Apache-2.0
> > > > > > WebOb>=1.6.0 # MIT"
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "Tim Hinrichs" <tim at styra.com>
> > > > > > To: "Ruben" <r.manganiello1 at studenti.unisa.it>,
> > > > > > openstack-dev at lists.openstack.org
> > > > > > Cc: "timothy l hinrichs" <timothy.l.hinrichs at gmail.com>
> > > > > > Sent: Wednesday, November 23, 2016 11:44:40 PM
> > > > > > Subject: Re: [Congress] Magnum_driver
> > > > > >
> > > > > > Ruben,
> > > > > >
> > > > > > All the software that gets imported by your code needs to be
> listed
> > > in
> > > > > > requirements.txt so that when tox runs, it installs that
> software.
> > > > When
> > > > > I
> > > > > > did some debugging for you I made the necessary change, so if you
> > add
> > > > > that
> > > > > > back into your change, that error should disappear.
> > > > > >
> > > > > > https://review.openstack.org/#/c/397150/
> > > > > >
> > > > > > Tim
> > > > > >
> > > > > >
> > > > > > On Wed, Nov 23, 2016 at 12:29 PM Ruben <
> > > > r.manganiello1 at studenti.unisa.it
> > > > > >
> > > > > > wrote:
> > > > > >
> > > > > > > Hi everybody,
> > > > > > > I've trying to run the unit test of the magnum_driver.
> > > > > > >
> > > > > > > I make:
> > > > > > > -cd /opt/stack/congress/
> > > > > > > -tox -epy27
> > > > > > >
> > > > > > > but I have error with the import.
> > > > > > > This is the output:
> > > > > > >
> > > > > > > "py27 develop-inst-noop: /opt/stack/congress
> > > > > > > py27 installed:
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> alabaster==0.7.9,alembic==0.8.8,amqp==1.4.9,anyjson==0.3.3,appdirs==1.4.0,Babel==2.3.4,cachetools==2.0.0,cffi==1.9.1,cliff==2.2.0,cmd2==0.6.9,-e
> > > > > > > git+
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> http://git.openstack.org/openstack/congress@b2d96b56f721c941e85db565d203df008c455b19#egg=congress,contextlib2==0.5.4,coverage==4.2,cryptography==1.5.3,debtcollector==1.9.0,decorator==4.0.10,docutils==0.12,dogpile.cache==0.6.2,enum34==1.1.6,eventlet==0.19.0,extras==1.0.0,fasteners==0.14.1,fixtures==3.0.0,flake8==2.2.4,funcsigs==1.0.2,functools32==3.2.3.post2,futures==3.0.5,futurist==0.19.0,greenlet==0.4.10,hacking==0.10.2,idna==2.1,ipaddress==1.0.17,iso8601==0.1.11,Jinja2==2.8,jsonpatch==1.14,jsonpointer==1.10,jsonschema==2.5.1,keystoneauth1==2.15.0,keystonemiddleware==4.10.0,kombu==3.0.37,linecache2==1.0.0,lxml==3.6.4,Mako==1.0.6,MarkupSafe==0.23,mccabe==0.2.1,mock==2.0.0,monotonic==1.2,mox3==0.18.0,msgpack-python==0.4.8,netaddr==0.7.18,netifaces==0.10.5,openstacksdk==0.9.9,os-client-config==1.22.0,osc-lib==1.2.0,oslo.concurrency==3.15.0,oslo.config==3.19.0,oslo.context==2.10.0,oslo.db==4.14.0,oslo.i18n==3.10.0,oslo.log==3.17.0,oslo.messaging==5.12.0,oslo.middleware==3.20.0,oslo.policy==1.16.0,oslo.serialization==2.14.0,oslo.service==1.17.0,oslo.utils==3.18.0,oslo.vmware==2.15.0,oslosphinx==4.8.0,oslotest==2.11.0,Paste==2.0.3,PasteDeploy==1.5.2,pbr==1.10.0,pep8==1.5.7,pika==0.10.0,pika-pool==0.1.3,ply==3.9,positional==1.1.1,prettytable==0.7.2,PuLP==1.6.1,pyasn1==0.1.9,pycadf==2.4.0,pycparser==2.17,pyflakes==0.8.1,Pygments==2.1.3,pyinotify==0.9.6,pyOpenSSL==16.2.0,pyparsing==1.5.7,python-ceilometerclient==2.7.0,python-cinderclient==1.9.0,python-dateutil==2.6.0,python-editor==1.0.1,python-glanceclient==2.5.0,python-heatclient==1.5.0,python-ironicclient==1.8.0,python-keystoneclient==3.6.0,python-mimeparse==1.6.0,python-muranoclient==0.11.1,python-neutronclient==6.0.0,python-novaclient==6.0.0,python-openstackclient==3.3.0,python-subunit==1.2.0,python-swiftclient==3.1.0,pytz==2016.7,PyYAML==3.12,reno==1.8.0,repoze.lru==0.6,requests==2.11.1,requests-mock==1.1.0,requestsexceptions==1.1.3,retrying==1.3.3,rfc3986==0.4.1,Routes==2.3.1,simplejson==3.10.0,six==1.10.0,snowballstemmer==1.2.1,Sphinx==1.3.6,sphinx-rtd-theme==0.1.9,SQLAlchemy==1.1.3,sqlalchemy-migrate==0.10.0,sqlparse==0.2.2,stevedore==1.18.0,suds-jurko==0.6,Tempita==0.5.2,tenacity==3.3.0,testrepository==0.0.20,testscenarios==0.5.0,testtools==2.2.0,traceback2==1.4.0,unicodecsv==0.14.1,unittest2==1.1.0,urllib3==1.19,warlock==1.2.0,WebOb==1.6.2,wrapt==1.10.8,yaql==1.1.1
> > > > > > > py27
> > > > > > > <
> > > > > >
> > > > >
> > > >
> > >
> >
> http://git.openstack.org/openstack/congress@b2d96b56f721c941e85db565d203df008c455b19#egg=congress,contextlib2==0.5.4,coverage==4.2,cryptography==1.5.3,debtcollector==1.9.0,decorator==4.0.10,docutils==0.12,dogpile.cache==0.6.2,enum34==1.1.6,eventlet==0.19.0,extras==1.0.0,fasteners==0.14.1,fixtures==3.0.0,flake8==2.2.4,funcsigs==1.0.2,functools32==3.2.3.post2,futures==3.0.5,futurist==0.19.0,greenlet==0.4.10,hacking==0.10.2,idna==2.1,ipaddress==1.0.17,iso8601==0.1.11,Jinja2==2.8,jsonpatch==1.14,jsonpointer==1.10,jsonschema==2.5.1,keystoneauth1==2.15.0,keystonemiddleware==4.10.0,kombu==3.0.37,linecache2==1.0.0,lxml==3.6.4,Mako==1.0.6,MarkupSafe==0.23,mccabe==0.2.1,mock==2.0.0,monotonic==1.2,mox3==0.18.0,msgpack-python==0.4.8,netaddr==0.7.18,netifaces==0.10.5,openstacksdk==0.9.9,os-client-config==1.22.0,osc-lib==1.2.0,oslo.concurrency==3.15.0,oslo.config==3.19.0,oslo.context==2.10.0,oslo.db==4.14.0,oslo.i18n==3.10.0,oslo.log==3.17.0,oslo.messaging==5.12.0,oslo.middleware==3.20.0,oslo.policy==1.16.0,oslo.serialization==2.14.0,oslo.service==1.17.0,oslo.utils==3.18.0,oslo.vmware==2.15.0,oslosphinx==4.8.0,oslotest==2.11.0,Paste==2.0.3,PasteDeploy==1.5.2,pbr==1.10.0,pep8==1.5.7,pika==0.10.0,pika-pool==0.1.3,ply==3.9,positional==1.1.1,prettytable==0.7.2,PuLP==1.6.1,pyasn1==0.1.9,pycadf==2.4.0,pycparser==2.17,pyflakes==0.8.1,Pygments==2.1.3,pyinotify==0.9.6,pyOpenSSL==16.2.0,pyparsing==1.5.7,python-ceilometerclient==2.7.0,python-cinderclient==1.9.0,python-dateutil==2.6.0,python-editor==1.0.1,python-glanceclient==2.5.0,python-heatclient==1.5.0,python-ironicclient==1.8.0,python-keystoneclient==3.6.0,python-mimeparse==1.6.0,python-muranoclient==0.11.1,python-neutronclient==6.0.0,python-novaclient==6.0.0,python-openstackclient==3.3.0,python-subunit==1.2.0,python-swiftclient==3.1.0,pytz==2016.7,PyYAML==3.12,reno==1.8.0,repoze.lru==0.6,requests==2.11.1,requests-mock==1.1.0,requestsexceptions==1.1.3,retrying==1.3.3,rfc3986==0.4.1,Routes==2.3.1,simplejson==3.10.0,six==1.10.0,snowballstemmer==1.2.1,Sphinx==1.3.6,sphinx-rtd-theme==0.1.9,SQLAlchemy==1.1.3,sqlalchemy-migrate==0.10.0,sqlparse==0.2.2,stevedore==1.18.0,suds-jurko==0.6,Tempita==0.5.2,tenacity==3.3.0,testrepository==0.0.20,testscenarios==0.5.0,testtools==2.2.0,traceback2==1.4.0,unicodecsv==0.14.1,unittest2==1.1.0,urllib3==1.19,warlock==1.2.0,WebOb==1.6.2,wrapt==1.10.8,yaql==1.1.1py27
> > > > > > >
> > > > > > > runtests: PYTHONHASHSEED='4235171505 <(423)%20517-1505>
> <(423)%20517-1505>
> > <(423)%20517-1505>
> > > <(423)%20517-1505>
> > > > <(423)%20517-1505>
> > > > > <(423)%20517-1505>
> > > > > > <(423)%20517-1505>'
> > > > > > > py27 runtests: commands[0] | find . -type f -name *.py[c|o]
> > -delete
> > > > > > > py27 runtests: commands[1] | python setup.py testr --slowest
> > > > > > --testr-args=
> > > > > > > running testr
> > > > > > > running=OS_STDOUT_CAPTURE=${OS_STDOUT_CAPTURE:-1} \
> > > > > > > OS_STDERR_CAPTURE=${OS_STDERR_CAPTURE:-1} \
> > > > > > > OS_TEST_TIMEOUT=${OS_TEST_TIMEOUT:-60} \
> > > > > > > ${PYTHON:-python} -m subunit.run discover -t ./
> ./congress/tests
> > > > --list
> > > > > > > --- import errors ---
> > > > > > > Failed to import test module:
> > > > > > congress.tests.datasources.test_magnum_driver
> > > > > > > Traceback (most recent call last):
> > > > > > >   File
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> "/opt/stack/congress/.tox/py27/local/lib/python2.7/site-packages/unittest2/loader.py",
> > > > > > > line 456, in _find_test_path
> > > > > > >     module = self._get_module_from_name(name)
> > > > > > >   File
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> "/opt/stack/congress/.tox/py27/local/lib/python2.7/site-packages/unittest2/loader.py",
> > > > > > > line 395, in _get_module_from_name
> > > > > > >     __import__(name)
> > > > > > >   File "congress/tests/datasources/test_magnum_driver.py", line
> > 18,
> > > > in
> > > > > > > <module>
> > > > > > >     from congress.datasources import magnum_driver
> > > > > > >   File "congress/datasources/magnum_driver.py", line 16, in
> > > <module>
> > > > > > >     from magnumclient import client as magnum_client
> > > > > > > ImportError: No module named magnumclient
> > > > > > > Non-zero exit code (2) from test listing.
> > > > > > > error: testr failed (3)
> > > > > > > ERROR: InvocationError:
> '/opt/stack/congress/.tox/py27/bin/python
> > > > > > setup.py
> > > > > > > testr --slowest --testr-args='
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> __________________________________________________________________________________________________
> > > > > > > summary
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> __________________________________________________________________________________________________
> > > > > > > ERROR:   py27: commands failed"
> > > > > > >
> > > > > > >
> > > > > > > Pep8 is ok.
> > > > > > > What should I do to solve the error above?
> > > > > > >
> > > > > > > Anyway I've errors with the translators..
> > > > > > > I've add the code to review.
> > > > > > >
> > > > > > > Ruben
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20161212/c72c8061/attachment.html>