[openstack-dev] [networking-ovs-dpdk] VM creation fails with Unexpected vif_type=binding_failed

Praveen MANKARA RADHAKRISHNAN praveen.mankara at 6wind.com
Fri Nov 27 09:21:02 UTC 2015


Hi Sean,

I have changed the hostname in both machines.
and tried again still i have the same error.

I am trying to configure ovs-dpdk with vlan now.
For the kilo version the getting started guide was missing in the
repository.
But i have changed the repositories everywhere to kilo.

Please find the attached loal.conf for compute and controller.

one change i have made is i have added ml2 plusgin as vlan for compute
config also.
because if i exactly use the local.confs as in example the controller was
vlan and compute is taking as vxlan for the ml2 config.

And please find all the errors present in the compute and controller.

Thanks
Praveen

On Thu, Nov 26, 2015 at 5:58 PM, Mooney, Sean K <sean.k.mooney at intel.com>
wrote:

> Openstack uses the hostname as a primary key in many of the project.
> Nova and neutron both do this.
> If you had two nodes with the same host name then it would cause undefined
> behavior.
>
> Based on the error Andreas highlighted  are you currently trying to
> configure ovs-dpdk with vxlan/gre?
>
> I also noticed that the getting started guide you linked to earlier was
> for the master branch(mitaka) but
> You mentioned you were deploying kilo.
> The local.conf settings will be different in both case.
>
>
>
>
>
> -----Original Message-----
> From: Andreas Scheuring [mailto:scheuran at linux.vnet.ibm.com]
> Sent: Thursday, November 26, 2015 1:43 PM
> To: OpenStack Development Mailing List (not for usage questions)
> Subject: Re: [openstack-dev] [networking-ovs-dpdk] VM creation fails with
> Unexpected vif_type=binding_failed
>
> Praveen,
> there are many error in your q-svc log.
> It says:
>
> InvalidInput: Invalid input for operation: (u'Tunnel IP %(ip)s in use with
> host %(host)s', {'ip': u'10.81.1.150', 'host':
> u'localhost.localdomain'}).\n"]
>
>
> Did you maybe specify duplicated ips in your controllers and compute nodes
> neutron tunnel config?
>
> Or did you change the hostname after installation
>
> Or maybe the code has trouble with duplicated host names?
>
> --
> Andreas
> (IRC: scheuran)
>
>
>
> On Di, 2015-11-24 at 15:28 +0100, Praveen MANKARA RADHAKRISHNAN wrote:
> > Hi Sean,
> >
> >
> > Thanks for the reply.
> >
> >
> > Please find the logs attached.
> > ovs-dpdk is correctly running in compute.
> >
> >
> > Thanks
> > Praveen
> >
> > On Tue, Nov 24, 2015 at 3:04 PM, Mooney, Sean K
> > <sean.k.mooney at intel.com> wrote:
> >         Hi would you be able to attach the
> >
> >         n-cpu log form the computenode  and  the
> >
> >         n-sch and q-svc logs for the controller so we can see if there
> >         is a stack trace relating to the
> >
> >         vm boot.
> >
> >
> >
> >         Also can you confirm ovs-dpdk is running correctly on the
> >         compute node by running
> >
> >         sudo service ovs-dpdk status
> >
> >
> >
> >         the neutron and networking-ovs-dpdk commits are from their
> >         respective stable/kilo branches so they should be compatible
> >
> >         provided no breaking changes have been merged to either
> >         branch.
> >
> >
> >
> >         regards
> >
> >         sean.
> >
> >
> >
> >         From: Praveen MANKARA RADHAKRISHNAN
> >         [mailto:praveen.mankara at 6wind.com]
> >         Sent: Tuesday, November 24, 2015 1:39 PM
> >         To: OpenStack Development Mailing List (not for usage
> >         questions)
> >         Subject: Re: [openstack-dev] [networking-ovs-dpdk] VM creation
> >         fails with Unexpected vif_type=binding_failed
> >
> >
> >
> >         Hi Przemek,
> >
> >
> >
> >
> >         Thanks For the response,
> >
> >
> >
> >
> >
> >         Here are the commit ids for Neutron and networking-ovs-dpdk
> >
> >
> >
> >
> >
> >         [stack at localhost neutron]$ git log --format="%H" -n 1
> >
> >
> >         026bfc6421da796075f71a9ad4378674f619193d
> >
> >
> >         [stack at localhost neutron]$ cd ..
> >
> >
> >         [stack at localhost ~]$ cd networking-ovs-dpdk/
> >
> >
> >         [stack at localhost networking-ovs-dpdk]$  git log --format="%H"
> >         -n 1
> >
> >
> >         90dd03a76a7e30cf76ecc657f23be8371b1181d2
> >
> >
> >
> >
> >
> >         The Neutron agents are up and running in compute node.
> >
> >
> >
> >
> >
> >         Thanks
> >
> >
> >         Praveen
> >
> >
> >
> >
> >
> >
> >
> >         On Tue, Nov 24, 2015 at 12:57 PM, Czesnowicz, Przemyslaw
> >         <przemyslaw.czesnowicz at intel.com> wrote:
> >
> >                 Hi Praveen,
> >
> >
> >
> >                 There’s been some changes recently to
> >                 networking-ovs-dpdk, it no longer host’s a mech driver
> >                 as the openviswitch mech driver in Neutron supports
> >                 vhost-user ports.
> >
> >                 I guess something went wrong and the version of
> >                 Neutron is not matching networking-ovs-dpdk. Can you
> >                 post commit ids of Neutron and networking-ovs-dpdk.
> >
> >
> >
> >                 The other possibility is that the Neutron agent is not
> >                 running/died on the compute node.
> >
> >                 Check with:
> >
> >                 neutron agent-list
> >
> >
> >
> >                 Przemek
> >
> >
> >
> >                 From: Praveen MANKARA RADHAKRISHNAN
> >                 [mailto:praveen.mankara at 6wind.com]
> >                 Sent: Tuesday, November 24, 2015 12:18 PM
> >                 To: openstack-dev at lists.openstack.org
> >                 Subject: [openstack-dev] [networking-ovs-dpdk] VM
> >                 creation fails with Unexpected vif_type=binding_failed
> >
> >
> >
> >
> >                 Hi,
> >
> >
> >
> >
> >                 Am trying to set up an open stack (kilo) installation
> >                 using ovs-dpdk through devstack installation.
> >
> >
> >
> >
> >
> >                 I have followed the "
> >
> https://github.com/openstack/networking-ovs-dpdk/blob/master/doc/source/getstarted.rst
> " documentation.
> >
> >
> >
> >
> >
> >                 I used the same versions as in documentation
> >                 (fedora21, with right kernel).
> >
> >
> >
> >
> >
> >                 My openstack installation is successful in both
> >                 controller and compute.
> >
> >
> >                 I have used example local.conf given in the
> >                 documentation.
> >
> >
> >                 But if i try to spawn the VM. I am having the
> >                 following error.
> >
> >
> >
> >
> >
> >                 "NovaException: Unexpected vif_type=binding_failed"
> >
> >
> >
> >
> >
> >                 It would be really helpful if you can point out how to
> >                 debug and fix this error.
> >
> >
> >
> >
> >
> >                 Thanks
> >
> >
> >                 Praveen
> >
> >
> >
> >
> >
> >
> >
>  __________________________________________________________________________
> >                 OpenStack Development Mailing List (not for usage
> >                 questions)
> >                 Unsubscribe:
> >
> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> >
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
> >
> >
> >
> >
> >
> >
>  __________________________________________________________________________
> >         OpenStack Development Mailing List (not for usage questions)
> >         Unsubscribe:
> >         OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> >
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
> >
> >
> >
> >
> __________________________________________________________________________
> > OpenStack Development Mailing List (not for usage questions)
> > Unsubscribe:
> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>
>
> __________________________________________________________________________
> OpenStack Development Mailing List (not for usage questions)
> Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
> __________________________________________________________________________
> OpenStack Development Mailing List (not for usage questions)
> Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20151127/1e2e13fe/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: error_compute.log
Type: application/octet-stream
Size: 601142 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20151127/1e2e13fe/attachment-0004.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: error_controller.log
Type: application/octet-stream
Size: 121110 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20151127/1e2e13fe/attachment-0005.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: local.conf_compute
Type: application/octet-stream
Size: 1573 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20151127/1e2e13fe/attachment-0006.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: local.conf_controller
Type: application/octet-stream
Size: 1486 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20151127/1e2e13fe/attachment-0007.obj>


More information about the OpenStack-dev mailing list