[openstack-dev] PCI pass-through SRIOV

Kamsali, RaghavendraChari (Artesyn) RaghavendraChari.Kamsali at artesyn.com
Tue May 26 13:48:36 UTC 2015


Please find the attachment for the logs when changed in ml2_conf_sriov.ini

From: Kamsali, RaghavendraChari (Artesyn) [mailto:RaghavendraChari.Kamsali at artesyn.com]
Sent: Tuesday, May 26, 2015 1:36 PM
To: Moshe Levi; OpenStack Development Mailing List (not for usage questions); openstack at lists.openstack.org
Subject: Re: [Openstack] [openstack-dev] PCI pass-through SRIOV

Hi,

Yes I changed it on what you mentioned in ml2_conf_sriov.ini ,but same issue occurs.


Thanks and Regards,
Raghavendrachari kamsali,
Embedded Computing and Power,
Hyderabad, AndhraPradesh , India



From: Moshe Levi [mailto:moshele at mellanox.com]
Sent: Tuesday, May 26, 2015 12:58 PM
To: Kamsali, RaghavendraChari [ENGINEERING/IN]; OpenStack Development Mailing List (not for usage questions); openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>
Subject: RE: [openstack-dev] PCI pass-through SRIOV

Hi Kamsali,
This is the error:
Refusing to bind due to unsupported vnic_type: direct

Please add the following to you ml2_conf.ini
supported_pci_vendor_devs = 8086:154c

Thanks,
                Moshe Levi


From: Kamsali, RaghavendraChari (Artesyn) [mailto:RaghavendraChari.Kamsali at artesyn.com]
Sent: Monday, May 25, 2015 2:31 PM
To: Moshe Levi; OpenStack Development Mailing List (not for usage questions); openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>
Subject: RE: [openstack-dev] PCI pass-through SRIOV

FYI,

Neutron-server logs,
Ml2 config file on compute and controller
Nova.conf file



From: Moshe Levi [mailto:moshele at mellanox.com]
Sent: Saturday, May 23, 2015 7:53 PM
To: OpenStack Development Mailing List (not for usage questions); openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>
Subject: Re: [Openstack] [openstack-dev] PCI pass-through SRIOV

Hi Kamsali,
According to the logs you got binding failed error, which mean neutron failed to bind the port.
Can you send the neutron server log and the your neutron ml2 conf file?

Thank,
           Moshe Levi

From: Kamsali, RaghavendraChari (Artesyn)<mailto:RaghavendraChari.Kamsali at artesyn.com>
Sent: ‎Saturday‎, ‎May‎ ‎23‎, ‎2015 ‎6‎:‎38‎ ‎AM
To: OpenStack Development Mailing List (not for usage questions)<mailto:openstack-dev at lists.openstack.org>, openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>

Hi,

Am deploying controller-compute openstack setup , in controller I configured openvswitch bridges and in computed node I configured PCI nic supported SRIOV capability and while am spawning VM am getting following error as in attached file:

I followed the link for setting up the sriov https://wiki.openstack.org/wiki/SR-IOV-Passthrough-For-Networking and http://www.qlogic.com/solutions/Documents/UsersGuide_OpenStack_SR-IOV.pdf

Could any one help me regarding this issue


Thanks and Regards,
Raghavendrachari kamsali,
Embedded Computing and Power,
Hyderabad, AndhraPradesh , India


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20150526/88314944/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: logs.zip
Type: application/x-zip-compressed
Size: 973392 bytes
Desc: logs.zip
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20150526/88314944/attachment-0001.bin>


More information about the OpenStack-dev mailing list