[openstack-dev] [Congress] Info on Currently Supported Data Drivers
Daniel Comnea
comnea.dani at gmail.com
Wed Mar 25 10:28:55 UTC 2015
This project looks very interesting and i might give it a go by installing
standalone. I have a question though: are there any plans to expose the
current output as part of Horizon or any other UI ?
Thx,
Dani
On Wed, Mar 25, 2015 at 5:15 AM, Zhou, Zhenzan <zhenzan.zhou at intel.com>
wrote:
> Just found it has been supported, e.g.
>
>
>
> openstack congress driver schema show ceilometer
>
>
>
> So here is the way to check data source drivers:
>
>
>
> For supported data source drivers:
>
> 1. openstack congress driver list
>
> 2. openstack congress driver schema show <ds-name>
>
>
>
> For enabled data source drivers:
>
> 1. openstack congress datasource list
>
> 2. openstack congress datasource schema show <ds-name>
>
>
>
> BR
>
> Zhou Zhenzan
>
>
>
> *From:* Zhou, Zhenzan [mailto:zhenzan.zhou at intel.com]
> *Sent:* Wednesday, March 25, 2015 12:24 PM
>
> *To:* OpenStack Development Mailing List (not for usage questions)
> *Subject:* Re: [openstack-dev] [Congress] Info on Currently Supported
> Data Drivers
>
>
>
> Hi,
>
>
>
> The ‘driver list’ sub command could provide supported data source drivers,
> but we cannot show its schema if it’s NOT LOADED. So we still have to check
> the code for the schema. My point is that we could support show schemas for
> any supported data source drivers, even it’s not loaded.
>
>
>
> zhenzan at zhenzan-openstack:~$ openstack congress driver list
>
>
> +----------------+--------------------------------------------------------------------------+
>
> | id |
> description |
>
>
> +----------------+--------------------------------------------------------------------------+
>
> | ceilometer | Datasource driver that interfaces with
> ceilometer. |
>
> | plexxi | Datasource driver that interfaces with
> PlexxiCore. |
>
> | swift | Datasource driver that interfaces with
> swift. |
>
> | neutronv2 | Datasource driver that interfaces with OpenStack
> Networking aka Neutron. |
>
> | nova | Datasource driver that interfaces with OpenStack
> Compute aka nova. |
>
> | murano | Datasource driver that interfaces with
> murano |
>
> | keystone | Datasource driver that interfaces with
> keystone. |
>
> | cloudfoundryv2 | Datasource driver that interfaces with
> cloudfoundry |
>
> | ironic | Datasource driver that interfaces with OpenStack bare
> metal aka ironic. |
>
> | cinder | Datasource driver that interfaces with OpenStack
> cinder. |
>
> | vcenter | Datasource driver that interfaces with
> vcenter |
>
> | glancev2 | Datasource driver that interfaces with OpenStack Images
> aka Glance. |
>
>
> +----------------+--------------------------------------------------------------------------+
>
> zhenzan at zhenzan-openstack:~$ openstack congress datasource schema show
> ceilometer
>
> ERROR: openstack Resource ceilometer not found (HTTP 404)
>
>
>
>
>
> BR
>
> Zhou Zhenzan
>
> *From:* Pierre-Emmanuel Ettori [mailto:pe.ettori at gmail.com
> <pe.ettori at gmail.com>]
> *Sent:* Wednesday, March 25, 2015 11:54 AM
> *To:* OpenStack Development Mailing List (not for usage questions)
> *Subject:* Re: [openstack-dev] [Congress] Info on Currently Supported
> Data Drivers
>
>
>
> Hi Zhenzan,
> Actually I believe the command that Tim is looking for is:
>
> openstack congress datasource list
>
> Please let us know if you are running into any issue.
>
> Thanks
> Pierre
>
>
>
> On Tue, Mar 24, 2015 at 8:39 PM Tim Hinrichs <thinrichs at vmware.com> wrote:
>
> Hi Zhenzan,
>
>
>
> I don't have the CLI in front of me, but check out the 'driver' commands.
> The command you're looking for is something like the following.
>
>
>
> $ openstack congress driver list
>
>
>
> Tim
>
>
> ------------------------------
>
> *From:* Zhou, Zhenzan <zhenzan.zhou at intel.com>
> *Sent:* Tuesday, March 24, 2015 7:39 PM
>
>
> *To:* OpenStack Development Mailing List (not for usage questions)
> *Subject:* Re: [openstack-dev] [Congress] Info on Currently Supported
> Data Drivers
>
> Hi,
>
>
>
> To check LOADED(or ENABLED) data source drivers for a running system, you
> can use congress cli. Maybe we could add a command to list SUPPORTED data
> source drivers?
>
>
>
> zhenzan at zhenzan-openstack:~$ openstack congress datasource list
>
>
> +--------------------------------------+-----------+---------+------+-----------------------------------------------------------------------------------------------------------------------------+
>
> | id | name | enabled | type |
> config
> |
>
>
> +--------------------------------------+-----------+---------+------+-----------------------------------------------------------------------------------------------------------------------------+
>
> | 20a33403-e8d0-440a-b36f-0383bfcfd06f | cinder | True | None |
> {u'username': u'admin', u'tenant_name': u'admin', u'password': u'<hidden>',
> u'auth_url': u'http://10.239.47.118:5000/v2.0'} |
>
> | 7326d165-9e03-4b9c-acf8-b94a7f0a013f | ironic | True | None |
> {u'username': u'admin', u'tenant_name': u'admin', u'password': u'<hidden>',
> u'auth_url': u'http://10.239.47.118:5000/v2.0'} |
>
> | 80587cf8-ffbc-4c9a-b452-f884427b8cac | keystone | True | None |
> {u'username': u'admin', u'tenant_name': u'admin', u'password': u'<hidden>',
> u'auth_url': u'http://10.239.47.118:5000/v2.0'} |
>
> | 9a85d0f9-c869-41fe-b6d0-b784c1e84169 | nova | True | None |
> {u'username': u'admin', u'tenant_name': u'admin', u'password': u'<hidden>',
> u'auth_url': u'http://10.239.47.118:5000/v2.0'} |
>
> | df715798-7aa9-4fdc-8bfd-f37718bd4691 | neutronv2 | True | None |
> {u'username': u'admin', u'tenant_name': u'admin', u'password': u'<hidden>',
> u'auth_url': u'http://10.239.47.118:5000/v2.0'} |
>
> | e819b6c4-3744-4c45-9623-ad26ead15485 | glancev2 | True | None |
> {u'username': u'admin', u'tenant_name': u'admin', u'password': u'<hidden>',
> u'auth_url': u'http://10.239.47.118:5000/v2.0'} |
>
>
> +--------------------------------------+-----------+---------+------+-----------------------------------------------------------------------------------------------------------------------------+
>
>
>
> zhenzan at zhenzan-openstack:~$ openstack congress datasource schema show
> cinder
>
> +-----------+----------------------------------------------------+
>
> | table | columns |
>
> +-----------+----------------------------------------------------+
>
> | services | {'name': 'status', 'description': 'None'}, |
>
> | | {'name': 'binary', 'description': 'None'}, |
>
> | | {'name': 'zone', 'description': 'None'}, |
>
> | | {'name': 'state', 'description': 'None'}, |
>
> | | {'name': 'updated_at', 'description': 'None'}, |
>
> | | {'name': 'host', 'description': 'None'}, |
>
> | | {'name': 'disabled_reason', 'description': 'None'} |
>
> | | |
>
> | snapshots | {'name': 'status', 'description': 'None'}, |
>
> | | {'name': 'created_at', 'description': 'None'}, |
>
> | | {'name': 'volume_id', 'description': 'None'}, |
>
> | | {'name': 'size', 'description': 'None'}, |
>
> | | {'name': 'id', 'description': 'None'}, |
>
> | | {'name': 'name', 'description': 'None'} |
>
> | | |
>
> | volumes | {'name': 'id', 'description': 'None'}, |
>
> | | {'name': 'size', 'description': 'None'}, |
>
> | | {'name': 'user_id', 'description': 'None'}, |
>
> | | {'name': 'status', 'description': 'None'}, |
>
> | | {'name': 'description', 'description': 'None'}, |
>
> | | {'name': 'name', 'description': 'None'}, |
>
> | | {'name': 'bootable', 'description': 'None'}, |
>
> | | {'name': 'created_at', 'description': 'None'}, |
>
> | | {'name': 'volume_type', 'description': 'None'} |
>
> | | |
>
> +-----------+----------------------------------------------------+
>
>
>
>
>
> BR
>
> Zhou Zhenzan
>
>
>
> *From:* Tim Hinrichs [mailto:thinrichs at vmware.com]
> *Sent:* Wednesday, March 25, 2015 6:07 AM
> *To:* OpenStack Development Mailing List (not for usage questions)
> *Subject:* Re: [openstack-dev] [Congress] Info on Currently Supported
> Data Drivers
>
>
>
> Hi Bryan,
>
>
>
> I wish we could claim Congress has most of the data from OpenStack APIs
> already available for policy, but that’s not the case today.
>
>
>
> If it were me, I’d start with your use cases, figure out which services
> and API calls you’ll need to support those use cases, and then check if
> those APIs are already available in Congress.
>
>
>
> Tim
>
>
>
> On Mar 24, 2015, at 1:47 PM, Bryan Sullivan <blsaws at hotmail.com> wrote:
>
>
>
> Thanks for clarifying, Tim (and Alex for the other response).
>
> Since I have to understand the code anyway going to the drivers for
> current info is reasonable.
>
> Can I derive from your statement "One of Congress’s goals is to make any
> data available via an API call to policy-related" that Congress already
> exposes (in Congress tables) most/all data available through OpenStack
> component APIs? That would save me digging through the OpenStack code as
> well.
> ------------------------------
>
> From: thinrichs at vmware.com
> To: openstack-dev at lists.openstack.org
> Date: Tue, 24 Mar 2015 19:57:26 +0000
> Subject: Re: [openstack-dev] [Congress] Info on Currently Supported Data
> Drivers
>
> Hi Bryan,
>
>
>
> Inline.
>
>
>
> On Mar 24, 2015, at 12:13 PM, Bryan Sullivan <blsaws at hotmail.com> wrote:
>
>
>
> Hi, I have a question about where to find the complete set of currently
> supported data drivers (with table/row details) for Congress. The info at
> http://congress.readthedocs.org/en/latest/cloudservices.html#drivers
> <https://urldefense.proofpoint.com/v2/url?u=http-3A__congress.readthedocs.org_en_latest_cloudservices.html-23drivers&d=AwMFAw&c=Sqcl0Ez6M0X8aeM67LKIiDJAXVeAw-YihVMNtXt-uEs&r=B6BWd4kFfgOzAREgThxkmTZKy7dDXE2-eBAmL0PBK7s&m=7K6Tq1uqgCY-gmJMedkayeCZgjUEWp7QD_HaJg6pHmY&s=rEUZxD7aLCxwILxm2ugsR4Qr-4JXCdZ_-9BWcvG5F_k&e=>
> seems to cover only Nova and Neutron. I'm sure that I can pull this info
> from the source at
> https://github.com/stackforge/congress/tree/master/congress/datasources
> <https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_stackforge_congress_tree_master_congress_datasources&d=AwMFAw&c=Sqcl0Ez6M0X8aeM67LKIiDJAXVeAw-YihVMNtXt-uEs&r=B6BWd4kFfgOzAREgThxkmTZKy7dDXE2-eBAmL0PBK7s&m=7K6Tq1uqgCY-gmJMedkayeCZgjUEWp7QD_HaJg6pHmY&s=XeNw_NiKGg3HrR5R6oVbN9EVV2RhB3CQ4waMWGvBAHM&e=>
> but I was looking for any documentation on the current state of that code's
> design. The existing blueprints (e.g. at
> https://github.com/stackforge/congress-specs)
> <https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_stackforge_congress-2Dspecs-29&d=AwMFAw&c=Sqcl0Ez6M0X8aeM67LKIiDJAXVeAw-YihVMNtXt-uEs&r=B6BWd4kFfgOzAREgThxkmTZKy7dDXE2-eBAmL0PBK7s&m=7K6Tq1uqgCY-gmJMedkayeCZgjUEWp7QD_HaJg6pHmY&s=AjqWychcmYYsMd9oOGytLq3rXOqzhJGLbUTi2OuX2_0&e=>
> do not go into this detail AFAICT.
>
>
>
> I’d definitely just do a directory listing on the source code. Syncing
> the docs is something we do before a major release. Things are just
> changing too quickly to do anything else.
>
>
>
> Also, since I'm looking into how the current supported Congress tables
> will support use cases of the OPNFV Copper project [1], it will be also
> helpful to know where I would look for the set of potential policy-related
> data items inside OpenStack docs/code for the various components. If I find
> a gap against a use case, I would want to be able to specify related
> patches (e.g. where data source driver extensions should get the additional
> data) so I need to know where the data comes from (and what's available)
> inside OpenStack.
>
>
>
> One of Congress’s goals is to make any data available via an API call to
> policy-related. So anything the API calls of OpenStack returns are
> reasonable candidates for writing policy over.
>
>
>
> Tim
>
>
>
> [1] https://wiki.opnfv.org/copper/use_cases
> <https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.opnfv.org_copper_use-5Fcases&d=AwMF-g&c=Sqcl0Ez6M0X8aeM67LKIiDJAXVeAw-YihVMNtXt-uEs&r=B6BWd4kFfgOzAREgThxkmTZKy7dDXE2-eBAmL0PBK7s&m=lssF60z2CQNbUwpN7SMHds5C8d33H4qy6lYURJ57ifM&s=SWYETWsuJ04nF3g_lUDlGGi7SlwgIHjobgh9d5zGLA4&e=>
>
> Thanks for your help!
> Bryan
>
>
>
>
>
> __________________________________________________________________________
> OpenStack Development Mailing List (not for usage questions)
> Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>
>
>
>
> __________________________________________________________________________
> OpenStack Development Mailing List (not for usage questions) Unsubscribe:
> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>
> __________________________________________________________________________
> OpenStack Development Mailing List (not for usage questions)
> Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>
>
>
> __________________________________________________________________________
> OpenStack Development Mailing List (not for usage questions)
> Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>
>
> __________________________________________________________________________
> OpenStack Development Mailing List (not for usage questions)
> Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20150325/f4dc018d/attachment.html>
More information about the OpenStack-dev
mailing list