Open Stack

Thanks John for your response :)
I am currently working on the reconfiguring the HSM in different way.
Shall let you know once my stuff is working.

Thanks and Regards,
Asha Seshagiri

On Tue, Jul 28, 2015 at 11:31 AM, John Vrbanac <john.vrbanac at rackspace.com>
wrote:

>  Asha,
>
> I'm not sure what went wrong. Something must have happened during your HA
> setup. You might check a couple different things, first you might check out
> your HA policies and HA group setup. The other thing you might make sure is
> that you only generate one mkek and hmac on one hsm (I use direct slot and
> not the HA virtual slot for this) and then replicate (vtl haAdmin
> -synchronize). If the HA group is setup properly it should replicate your
> mkek and hmac across the other HSMs in the HA group. As a side note, the
> pkcs11 plugin in Barbican currently retrieves the mkek and hmac by label,
> so make sure you don't have multiple keys in the HSM with the same label.
>
>
>     John Vrbanac
>      ------------------------------
> *From:* Asha Seshagiri <asha.seshagiri at gmail.com>
> *Sent:* Tuesday, July 28, 2015 9:22 AM
> *To:* John Vrbanac
> *Cc:* openstack-dev; John Wood; Douglas Mendizabal; Reller, Nathan S.
> *Subject:* Re: Barbican : Unable to create the secret after Integrating
> Barbican with HSM HA
>
>    Hi John ,
>
>  Any help would highly be appreciated.
>
>  Thanks and Regards,
>  Asha Seshagiri
>
> On Mon, Jul 27, 2015 at 3:10 PM, Asha Seshagiri <asha.seshagiri at gmail.com>
> wrote:
>
>>   Hi John ,
>>
>>  Thanks  a lot for providing me the response:)
>>  I followed the link[1] for configuring the HA SETUP
>> [1] : http://docs.aws.amazon.com/cloudhsm/latest/userguide/ha-setup.html
>>
>>  the final step in the above link  is haAdmin command which is run on the
>> client side(on Barbican) .
>> The slot 6 is the virtual slot(only on the client side and not visible on
>> LUNA SA ) and 1 and 2 are actual slots on LUNA SA HSM
>>
>>  Please find the response below :
>>
>> [root at HSM-Client bin]# ./vtl haAdmin show
>>
>>
>>
>>  ================ HA Global Configuration Settings ===============
>>
>>
>>  HA Proxy: disabled
>>
>> HA Auto Recovery: disabled
>>
>> Maximum Auto Recovery Retry: 0
>>
>> Auto Recovery Poll Interval: 60 seconds
>>
>> HA Logging: disabled
>>
>> Only Show HA Slots: no
>>
>>
>>
>>  ================ HA Group and Member Information ================
>>
>>
>>  HA Group Label: barbican_ha
>>
>> HA Group Number: 1489361010
>>
>> HA Group Slot #: 6
>>
>> Synchronization: enabled
>>
>> Group Members: 489361010, 489361011
>>
>> Standby members: <none>
>>
>>
>>  Slot # Member S/N Member Label Status
>>
>> ====== ========== ============ ======
>>
>> 1 489361010 barbican2 alive
>>
>> 2 489361011 barbican3 alive
>>
>> After knowing the virtual slot HA number , I ran the
>> pkcs11-key-generation with slot number 6 which did create mkek and hmac in
>> slot/partition 1 and 2 automatically . I am not sure why do we have to
>> replicate the keys between  partitions? Configured the slot 6 on the
>> barbican.conf as mentioned in my first email
>>
>> Not sure what might be the issue and
>>
>> It would be great if you could tell me the steps or where I would have
>> gone wrong.
>>
>> Thanks and Regards,
>>
>> Asha Seshagiri
>>
>> On Mon, Jul 27, 2015 at 2:36 PM, John Vrbanac <john.vrbanac at rackspace.com
>> > wrote:
>>
>>>  Asha,
>>>
>>> I've used the Safenet HSM "HA" virtual slot setup and it does work.
>>> However, the setup is very interesting because you need to generate the
>>> MKEK and HMAC on a single HSM and then replicate it to the other HSMs out
>>> of band of anything we have in Barbican. If I recall correctly, the Safenet
>>> Luna docs mention how to replicate keys or partitions between HSMs.
>>>
>>>
>>>     John Vrbanac
>>>      ------------------------------
>>> *From:* Asha Seshagiri <asha.seshagiri at gmail.com>
>>> *Sent:* Monday, July 27, 2015 2:00 PM
>>> *To:* openstack-dev
>>> *Cc:* John Wood; Douglas Mendizabal; John Vrbanac; Reller, Nathan S.
>>> *Subject:* Barbican : Unable to create the secret after Integrating
>>> Barbican with HSM HA
>>>
>>>      Hi All ,
>>>
>>>  I am working on Integrating Barbican with HSM HA set up.
>>>  I have configured slot 1 and slot 2 to be on HA on Luna SA set up .
>>> Slot 6 is a virtual slot on the client side which acts as the proxy for the
>>> slot 1 and 2. Hence on the Barbican side , I mentioned the slot number 6
>>> and its password which is identical to that of the passwords of slot1 and
>>> slot 2 in barbican.conf file.
>>>
>>>  Please find the contents of the file  :
>>>
>>> # ================= Secret Store Plugin ===================
>>> [secretstore]
>>> namespace = barbican.secretstore.plugin
>>> enabled_secretstore_plugins = store_crypto
>>>
>>> # ================= Crypto plugin ===================
>>> [crypto]
>>> namespace = barbican.crypto.plugin
>>> enabled_crypto_plugins = p11_crypto
>>>
>>> [simple_crypto_plugin]
>>> # the kek should be a 32-byte value which is base64 encoded
>>> kek = 'YWJjZGVmZ2hpamtsbW5vcHFyc3R1dnd4eXoxMjM0NTY='
>>>
>>> [dogtag_plugin]
>>> pem_path = '/etc/barbican/kra_admin_cert.pem'
>>> dogtag_host = localhost
>>> dogtag_port = 8443
>>> nss_db_path = '/etc/barbican/alias'
>>> nss_db_path_ca = '/etc/barbican/alias-ca'
>>> nss_password = 'password123'
>>> simple_cmc_profile = 'caOtherCert'
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> *[p11_crypto_plugin] # Path to vendor PKCS11 library library_path =
>>> '/usr/lib/libCryptoki2_64.so' # Password to login to PKCS11 session login =
>>> 'test5678' # Label to identify master KEK in the HSM (must not be the same
>>> as HMAC label) mkek_label = 'ha_mkek' # Length in bytes of master KEK
>>> mkek_length = 32 # Label to identify HMAC key in the HSM (must not be the
>>> same as MKEK label) hmac_label = 'ha_hmac' # HSM Slot id (Should correspond
>>> to a configured PKCS11 slot). Default: 1 slot_id = 6 *
>>> *Was able to create MKEK and HMAC successfully for the slots 1 and 2 on
>>> the HSM when we run the *
>>> *pkcs11-key-generation script  for slot 6 which should be the expected
>>> behaviour. *
>>>
>>> [root at HSM-Client bin]# python pkcs11-key-generation --library-path
>>> '/usr/lib/libCryptoki2_64.so'  --passphrase 'test5678' --slot-id 6 mkek
>>> --label 'ha_mkek'
>>> Verified label !
>>> MKEK successfully generated!
>>> [root at HSM-Client bin]# python pkcs11-key-generation --library-path
>>> '/usr/lib/libCryptoki2_64.so' --passphrase 'test5678' --slot-id 6 hmac
>>> --label 'ha_hmac'
>>> HMAC successfully generated!
>>> [root at HSM-Client bin]#
>>>
>>> Please find the HSM commands and responses to show the details of the
>>> partitions and partitions contents :
>>>
>>> root at HSM-Client bin]# ./vtl verify
>>>
>>>
>>>  The following Luna SA Slots/Partitions were found:
>>>
>>>
>>>  Slot Serial # Label
>>>
>>> ==== ======== =====
>>>
>>> 1 489361010 barbican2
>>>
>>> 2 489361011 barbican3
>>>
>>>
>>>  [HSMtestLuna1] lunash:> partition showcontents -partition barbican2
>>>
>>>
>>>
>>>  Please enter the user password for the partition:
>>>
>>> > ********
>>>
>>>
>>>
>>>  Partition Name: barbican2
>>>
>>> Partition SN: 489361010
>>>
>>> Storage (Bytes): Total=1046420, Used=256, Free=1046164
>>>
>>> Number objects: 2
>>>
>>>
>>>  Object Label: ha_mkek
>>>
>>> Object Type: Symmetric Key
>>>
>>>
>>>  Object Label: ha_hmac
>>>
>>> Object Type: Symmetric Key
>>>
>>>
>>>
>>>  Command Result : 0 (Success)
>>>
>>> [HSMtestLuna1] lunash:> partition showcontents -partition barbican3
>>>
>>>
>>>
>>>  Please enter the user password for the partition:
>>>
>>> > ********
>>>
>>>
>>>
>>>  Partition Name: barbican3
>>>
>>> Partition SN: 489361011
>>>
>>> Storage (Bytes): Total=1046420, Used=256, Free=1046164
>>>
>>> Number objects: 2
>>>
>>>
>>>  Object Label: ha_mkek
>>>
>>> Object Type: Symmetric Key
>>>
>>>
>>>  Object Label: ha_hmac
>>>
>>> Object Type: Symmetric Key
>>>
>>>
>>>
>>>
>>> [root at HSM-Client bin]# ./lunacm
>>>
>>>
>>>  LunaCM V2.3.3 - Copyright (c) 2006-2013 SafeNet, Inc.
>>>
>>>
>>>  Available HSM's:
>>>
>>>
>>>  Slot Id -> 1
>>>
>>> HSM Label -> barbican2
>>>
>>> HSM Serial Number -> 489361010
>>>
>>> HSM Model -> LunaSA
>>>
>>> HSM Firmware Version -> 6.2.1
>>>
>>> HSM Configuration -> Luna SA Slot (PW) Signing With Cloning Mode
>>>
>>> HSM Status -> OK
>>>
>>>
>>>  Slot Id -> 2
>>>
>>> HSM Label -> barbican3
>>>
>>> HSM Serial Number -> 489361011
>>>
>>> HSM Model -> LunaSA
>>>
>>> HSM Firmware Version -> 6.2.1
>>>
>>> HSM Configuration -> Luna SA Slot (PW) Signing With Cloning Mode
>>>
>>> HSM Status -> OK
>>>
>>>
>>>  Slot Id -> 6
>>>
>>> HSM Label -> barbican_ha
>>>
>>> HSM Serial Number -> 1489361010
>>>
>>> HSM Model -> LunaVirtual
>>>
>>> HSM Firmware Version -> 6.2.1
>>>
>>> HSM Configuration -> Virtual HSM (PW) Signing With Cloning Mode
>>>
>>> HSM Status -> N/A - HA Group
>>>
>>>
>>>  Current Slot Id: 1
>>>
>>> *Tried creating the secrets using the below command :*
>>>
>>> root at HSM-Client barbican]# curl -X POST -H
>>> 'content-type:application/json' -H 'X-Project-Id:12345' -d '{"payload":
>>> "my-secret-here", "payload_content_type": "text/plain"}'
>>> http://localhost:9311/v1/secrets
>>> {"code": 500, "description": "Secret creation failure seen - please
>>> contact site administrator.", "title": "Internal Server Error"}[root at HSM-
>>>
>>> *Please find the logs below :*
>>>
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers Traceback
>>> (most recent call last):
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers   File
>>> "/root/barbican/barbican/api/controllers/__init__.py", line 104, in handler
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers     return
>>> fn(inst, *args, **kwargs)
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers   File
>>> "/root/barbican/barbican/api/controllers/__init__.py", line 90, in enforcer
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers     return
>>> fn(inst, *args, **kwargs)
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers   File
>>> "/root/barbican/barbican/api/controllers/__init__.py", line 146, in
>>> content_types_enforcer
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers     return
>>> fn(inst, *args, **kwargs)
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers   File
>>> "/root/barbican/barbican/api/controllers/secrets.py", line 329, in on_post
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers
>>> transport_key_id=data.get('transport_key_id'))
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers   File
>>> "/root/barbican/barbican/plugin/resources.py", line 104, in store_secret
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers
>>> secret_model, project_model)
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers   File
>>> "/root/barbican/barbican/plugin/resources.py", line 267, in
>>> _store_secret_using_plugin
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers
>>> secret_metadata = store_plugin.store_secret(secret_dto, context)
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers   File
>>> "/root/barbican/barbican/plugin/store_crypto.py", line 96, in store_secret
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers
>>> encrypt_dto, kek_meta_dto, context.project_model.external_id
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers   File
>>> "/root/barbican/barbican/plugin/crypto/p11_crypto.py", line 80, in encrypt
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers
>>> meta['mkek_label'], meta['hmac_label'], session
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers   File
>>> "/root/barbican/barbican/plugin/crypto/pkcs11.py", line 687, in unwrap_key
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers
>>> self.verify_hmac(hmac_key, hmac, wrapped_key, session)
>>> 2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers   File
>>> "/root/barbican/barbican/plugin/crypto/pkcs11.py", line 657, in verify_hmac
>>>
>>>
>>> *2015-07-27 11:57:07.586 16362 ERROR barbican.api.controllers     rv =
>>> self.lib.C_VerifyInit(session, mech, hmac_key) 2015-07-27 11:57:07.586
>>> 16362 ERROR barbican.api.controllers TypeError: an integer is required *
>>>
>>>
>>> *Would like to know wheather Barbican supports Virtual slot
>>> configuration since have mentioned the slot # 6 under in barbican.conf file
>>> and has anyone tested HSM HA setup with Barbican. *
>>> Any help would highly be appreciated!
>>>    --
>>>  *Thanks and Regards,*
>>> *Asha Seshagiri*
>>>
>>
>>
>>
>> --
>>  *Thanks and Regards,*
>> *Asha Seshagiri*
>>
>
>
>
> --
>  *Thanks and Regards,*
> *Asha Seshagiri*
>



-- 
*Thanks and Regards,*
*Asha Seshagiri*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20150728/84ed5ad2/attachment.html>