Open Stack

Alex,

As I've just found out this package available here [1] is not actually
build with your patch (instead it is from previous successful build). Looks
like "perestroika" can not build this package due to some environment
related issues. I've poked Dmitry Burmistrov to check it out.
However, your patch is OK, make system can build this package and ISO
passes BVT tests.


[1]
http://172.18.160.74/osci/review/CR-202763/mos/7.0/fuel/base/centos6/Packages/fuel-library7.0-7.0.0-1.mos6888.git.bac86fe.noarch.rpm

Vladimir Kozhukalov

On Mon, Jul 20, 2015 at 4:04 PM, Vladimir Kozhukalov <
vkozhukalov at mirantis.com> wrote:

> Alex,
>
> Yes, spec is much better place to introduce this. BTW, "perestroika"
> builds new package for every commit and patch set and publishes them via
> HTTP. Please check here
> http://172.18.160.74/osci/review/CR-202763/mos/7.0/fuel/base/centos6/Packages/fuel-library7.0-7.0.0-1.mos6888.git.bac86fe.noarch.rpm
> if the package contains all necessary upstream modules.
>
> Vladimir Kozhukalov
>
> On Sat, Jul 18, 2015 at 3:28 AM, Alex Schultz <aschultz at mirantis.com>
> wrote:
>
>> Not until we start using it then any ci that tests with that module will
>> validate the modules inclusion. You can check the output of the jobs as we
>> are printing what modules are managed by librarian.
>>
>> -Alex
>> On Jul 17, 2015 6:17 PM, "Andrew Woodward" <xarses at gmail.com> wrote:
>>
>>> Fantastic, do we have some way to validate that the module was pulled in
>>> properly as part of fuel-library CI?
>>>
>>> On Fri, Jul 17, 2015 at 2:48 PM Alex Schultz <aschultz at mirantis.com>
>>> wrote:
>>>
>>>> Hey All,
>>>>
>>>> I've figured it out without having to modify the fuel-main build code.
>>>> I've updated the fuel-library spec with a build action that invokes the
>>>> script to pull down external modules.  Please take some time to review the
>>>> two reviews out there for this change to see if there are any issues with
>>>> the way it is implemented.
>>>>
>>>> https://review.openstack.org/#/c/202763/
>>>> https://review.openstack.org/#/c/202767/
>>>>
>>>> This is a first step towards being able to pull in unmodified external
>>>> puppet modules.
>>>>
>>>> Thanks,
>>>> -Alex
>>>>
>>>> On Fri, Jul 17, 2015 at 4:23 PM, Andrew Woodward <
>>>> awoodward at mirantis.com> wrote:
>>>>
>>>>>
>>>>>
>>>>> On Fri, Jul 17, 2015 at 12:24 PM Vladimir Kozhukalov <
>>>>> vkozhukalov at mirantis.com> wrote:
>>>>>
>>>>>> Alex,
>>>>>>
>>>>>> Great that you did this. Now I think I can prepare fuel-main patch to
>>>>>> invoke this script right before building fuel-library package. I'll add you
>>>>>> to review it. Is it ok if I do this monday morning?
>>>>>>
>>>>>
>>>>> Keep in minde we agreeded to a deadline to get this sorted and in
>>>>> shape to land by EOD monday or we will have to retain the old, and crappy
>>>>> fork method. If possible please work out how this needs to work as early as
>>>>> possible so Alex can continue.
>>>>>
>>>>>
>>>>>> Vladimir Kozhukalov
>>>>>>
>>>>>> On Fri, Jul 17, 2015 at 5:51 PM, Alex Schultz <aschultz at mirantis.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hey Vladimir,
>>>>>>>
>>>>>>> On Fri, Jul 17, 2015 at 7:33 AM, Vladimir Kozhukalov <
>>>>>>> vkozhukalov at mirantis.com> wrote:
>>>>>>>
>>>>>>>> Alex,
>>>>>>>>
>>>>>>>> Gathering upstream modules certainly should be implemented as a
>>>>>>>> separate script so as to make it possible to use it wherever we need this
>>>>>>>> (tests, builds, etc.) According to builds there are two things
>>>>>>>>
>>>>>>>> 1) We have so called "perestroika" package build system (Dmitry
>>>>>>>> Burmistrov is a main contributor here). By the end of next week we are
>>>>>>>> going to switch building all the packages to "perestroika". And in order to
>>>>>>>> gather upstream modules right before building fuel-library package, we need
>>>>>>>> to change perestroika build scripts.
>>>>>>>>
>>>>>>>> 2) Currently we build packages using make system and you are right
>>>>>>>> about the place where you need to make changes.
>>>>>>>> https://github.com/stackforge/fuel-main/blob/master/packages/module.mk#L63-L82
>>>>>>>> If you create shell script, I'll help you to add it to make code.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> I have updated my review[0] to extract the update logic to it's own
>>>>>>> bash script that can be invoked by the build scripts.  Let me know what
>>>>>>> would be the best way to wedge this in there.  I think for the
>>>>>>> "perestroika" this would also be needed for the fuel-library build, so if
>>>>>>> you point me at that I can see if I can help make that change as well.
>>>>>>>
>>>>>>> Thanks,
>>>>>>> -Alex
>>>>>>>
>>>>>>> [0] https://review.openstack.org/#/c/202763/
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>> Vladimir Kozhukalov
>>>>>>>>
>>>>>>>> On Fri, Jul 17, 2015 at 2:56 PM, Aleksandr Didenko <
>>>>>>>> adidenko at mirantis.com> wrote:
>>>>>>>>
>>>>>>>>> I believe build_repo function is the best way to do this [0]. So
>>>>>>>>> for fuel-library we'll need to run a shell script right from the repo
>>>>>>>>> before 'touch $$@'. We can make it either conditional ( test -f
>>>>>>>>> ./path/additional_build_script.sh && bash ./path/additional_build_script.sh
>>>>>>>>> ) or as additional parameter to function and add it in fuel-library call [1]
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>> Alex
>>>>>>>>>
>>>>>>>>> [0]
>>>>>>>>> https://github.com/stackforge/fuel-main/blob/master/repos.mk#L16-L37
>>>>>>>>> [1]
>>>>>>>>> https://github.com/stackforge/fuel-main/blob/master/repos.mk#L45
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Fri, Jul 17, 2015 at 2:37 PM, Alex Schultz <
>>>>>>>>> aschultz at mirantis.com> wrote:
>>>>>>>>>
>>>>>>>>>> Hey Alex,
>>>>>>>>>>
>>>>>>>>>> On Jul 17, 2015 4:32 AM, "Aleksandr Didenko" <
>>>>>>>>>> adidenko at mirantis.com> wrote:
>>>>>>>>>> >
>>>>>>>>>> > Hi,
>>>>>>>>>> >
>>>>>>>>>> > I think that we should provide a separate script that will
>>>>>>>>>> fetch the upstream modules into fuel-library/deployment/puppet/ directory.
>>>>>>>>>> It will allow us to have everything in a single place and use this script
>>>>>>>>>> in ISO build process and CI jobs.
>>>>>>>>>> >
>>>>>>>>>>
>>>>>>>>>> Right. That is what I'm going for. The issue I need help with is
>>>>>>>>>> the best way to execute this as part of the build process.  From what i
>>>>>>>>>> understand of the build process is that we are using git archive for all
>>>>>>>>>> pieces so I'm not sure how to wedge in an extra script execution to do the
>>>>>>>>>> module fetch.  The creation of the script isn't the issue, the issue is how
>>>>>>>>>> can I properly run it as part of the build process.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> > Regards,
>>>>>>>>>> > Alex
>>>>>>>>>> >
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>> -Alex
>>>>>>>>>>
>>>>>>>>>> > On Thu, Jul 16, 2015 at 11:17 PM, Alex Schultz <
>>>>>>>>>> aschultz at mirantis.com> wrote:
>>>>>>>>>> >>
>>>>>>>>>> >> Hello everyone,
>>>>>>>>>> >>
>>>>>>>>>> >> I have committed the initial configuration required to start
>>>>>>>>>> leveraging librarian-puppet as part of the way we pull in upstream puppet
>>>>>>>>>> modules[0]. Additionally, I have also committed a change that would pull in
>>>>>>>>>> the openstack-ironic module[1].  The one piece that is missing from this
>>>>>>>>>> being a complete solution is the ability to run librarian-puppet as part of
>>>>>>>>>> our build process for the fuel-library.  I've looked into the fuel-main
>>>>>>>>>> build scripts and I think it's over my head to figure this out just by
>>>>>>>>>> looking. Can anyone explain to me or assist me in how I could go about
>>>>>>>>>> modifying the existing build system to be able to run librarian-puppet to
>>>>>>>>>> prepare the source for the package?  In my initial investigation, it looks
>>>>>>>>>> like it would be a modification of the fuel-main/packages/
>>>>>>>>>> module.mk[3] file.  I basically need to do the
>>>>>>>>>> prepare_library[3] function from the 202763 review[0] after we've pulled
>>>>>>>>>> all the sources together to fetch the upstream modules.
>>>>>>>>>> >>
>>>>>>>>>> >>
>>>>>>>>>> >> Thanks,
>>>>>>>>>> >> -Alex
>>>>>>>>>> >>
>>>>>>>>>> >> [0] https://review.openstack.org/202763
>>>>>>>>>> >> [1] https://review.openstack.org/202767
>>>>>>>>>> >> [2]
>>>>>>>>>> https://github.com/stackforge/fuel-main/blob/master/packages/module.mk#L63-L82
>>>>>>>>>> >> [3]
>>>>>>>>>> https://review.openstack.org/#/c/202763/1/utils/jenkins/fuel_noop_tests.rb
>>>>>>>>>> >>
>>>>>>>>>> >>
>>>>>>>>>> __________________________________________________________________________
>>>>>>>>>> >> OpenStack Development Mailing List (not for usage questions)
>>>>>>>>>> >> Unsubscribe:
>>>>>>>>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>>>>>>>>> >>
>>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>>>>>>>> >>
>>>>>>>>>> >
>>>>>>>>>> >
>>>>>>>>>> >
>>>>>>>>>> __________________________________________________________________________
>>>>>>>>>> > OpenStack Development Mailing List (not for usage questions)
>>>>>>>>>> > Unsubscribe:
>>>>>>>>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>>>>>>>>> >
>>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>>>>>>>> >
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> __________________________________________________________________________
>>>>>>>>>> OpenStack Development Mailing List (not for usage questions)
>>>>>>>>>> Unsubscribe:
>>>>>>>>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> __________________________________________________________________________
>>>>>>>>> OpenStack Development Mailing List (not for usage questions)
>>>>>>>>> Unsubscribe:
>>>>>>>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> __________________________________________________________________________
>>>>>>>> OpenStack Development Mailing List (not for usage questions)
>>>>>>>> Unsubscribe:
>>>>>>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> __________________________________________________________________________
>>>>>>> OpenStack Development Mailing List (not for usage questions)
>>>>>>> Unsubscribe:
>>>>>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> __________________________________________________________________________
>>>>>> OpenStack Development Mailing List (not for usage questions)
>>>>>> Unsubscribe:
>>>>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>>>>
>>>>> --
>>>>> --
>>>>> Andrew Woodward
>>>>> Mirantis
>>>>> Fuel Community Ambassador
>>>>> Ceph Community
>>>>>
>>>>>
>>>>> __________________________________________________________________________
>>>>> OpenStack Development Mailing List (not for usage questions)
>>>>> Unsubscribe:
>>>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>>>
>>>>>
>>>>
>>>> __________________________________________________________________________
>>>> OpenStack Development Mailing List (not for usage questions)
>>>> Unsubscribe:
>>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>>
>>> --
>>>
>>> --
>>>
>>> Andrew Woodward
>>>
>>> Mirantis
>>>
>>> Fuel Community Ambassador
>>>
>>> Ceph Community
>>>
>>>
>>> __________________________________________________________________________
>>> OpenStack Development Mailing List (not for usage questions)
>>> Unsubscribe:
>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>
>>>
>> __________________________________________________________________________
>> OpenStack Development Mailing List (not for usage questions)
>> Unsubscribe:
>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20150720/8b11a981/attachment.html>