Open Stack

The decision should be made based on what vendor switch you have in your SAN.

-----Original Message-----
From: hao wang [mailto:sxmatch1986 at gmail.com] 
Sent: Friday, August 21, 2015 4:58 PM
To: OpenStack Development Mailing List (not for usage questions)
Subject: Re: [openstack-dev] [cinder] I have a question about openstack cinder zonemanager driver

I feel supporting multi drivers of zonemanager in one cinder.conf is not much value.

How you can decide when to use driver-1 or driver-2?

2015-08-14 10:20 GMT+08:00 Chenying (A) <ying.chen at huawei.com>:
>    Hi,
>
>
>
> Jay S. Bryant, Daniel Wilson .Thank you for your reply. Now I know 
> that in this case I need two cinder nodes, one for Brocade fabric and 
> one for Cisco fabric.
>
>
>
> Do you consider that cinder zonemanager is  necessary to support 
> multi-drivers from different vendors in one cinder.conf ?
>
>
>
>
>
>
>
> Thanks,
>
>
>
> ChenYing
>
>
>
>
>
> 发件人: Jay S. Bryant [mailto:jsbryant at electronicjungle.net]
> 发送时间: 2015年8月14日 0:36
> 收件人: OpenStack Development Mailing List (not for usage questions)
> 主题: Re: [openstack-dev] [cinder] I have a question about openstack 
> cinder zonemanager driver.
>
>
>
> Danny is correct.  You cannot have two different Zone Manager drivers 
> configured for one volume process.
>
> Jay
>
> On 08/13/2015 11:00 AM, Daniel Wilson wrote:
>
> I am fairly certain you cannot currently use two different FC switch 
> zone drivers in one cinder.conf.  In this case it looks like you would 
> need two cinder nodes, one for Brocade fabric and one for Cisco fabric.
>
>
>
> Thanks,
>
> Danny
>
>
>
> On Thu, Aug 13, 2015 at 2:43 AM, Chenying (A) <ying.chen at huawei.com> wrote:
>
> Hi, guys
>
>
>
>      I am using Brocade FC switch in my OpenStack environment. I have 
> a question about OpenStack cinder zonemanger driver.
>
>
>
> I find that [fc-zone-manager] can only configure one zone driver. If I 
> want to use two FC switches from different vendors at the same time.
>
>
>
> One is Brocade FC switch, the other one is Cisco FC switch. Is there a 
> method or solution configure two FC switch zone driver in one cinder.conf ?
>
>
>
> I want them both to support Zone Manager.
>
>
>
>
>
>
>
>
>
>
> ______________________________________________________________________
> ____ OpenStack Development Mailing List (not for usage questions)
> Unsubscribe: 
> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>
>
>
>
>
>
> ______________________________________________________________________
> ____
>
> OpenStack Development Mailing List (not for usage questions)
>
> Unsubscribe: 
> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>
>
>
>
> ______________________________________________________________________
> ____ OpenStack Development Mailing List (not for usage questions)
> Unsubscribe: 
> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>



--
Best Wishes For You!

__________________________________________________________________________
OpenStack Development Mailing List (not for usage questions)
Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev