[openstack-dev] [Neutron][LBaaS] Fulfilling Operator Requirements: Driver / Management API

Ed Hall edhall at yahoo-inc.com
Fri May 2 21:23:12 UTC 2014


Hi all,

At Yahoo, load balancing is heavily used throughout our stack for both HA and
load distribution, even within the OpenStack control plane itself. This involves a
variety of technologies, depending on scale and other requirements. For large
scale + L7 we use Apache Traffic Server, while L3DSR is the mainstay of the
highest bandwidth applications and a variety of technologies are used for simple
HA and lighter loads.

Each of these technologies has its own special operational requirements, and although
a single well-abstracted tenant-facing API to control all of them is much to be desired,
there can be no such luck for operators. A major concern for us is insuring that when a
tenant* has an operational issue they can communicate needs and concerns with
operators quickly and effectively. This means that any operator API must “speak the
same language” as the user API while exposing the necessary information and controls
for the underlying technology.

*In this case a “tenant” might represent a publicly-exposed URL with tens of millions of
users or an unexposed service which could impact several such web destinations.

                      -Ed


On May 2, 2014, at 9:34 AM, Eichberger, German <german.eichberger at hp.com<mailto:german.eichberger at hp.com>> wrote:

Hi Stephen + Adam,

Thanks Stephen and Adam for starting this discussion. I also see several different drivers. We at HP indeed use a pool of software load balancing appliances to replace any failing one. However, we are also interested in a model where we have load balancers in hot standby…

My hope with this effort is that we can somehow reuse the haproxy implementation and deploy it different ways depending on the necessary scalability, availability needs. Akin to creating a strategy which deploys the same haproxy control layer in a pool, on  nova vm, etc.

German


From: Stephen Balukoff [mailto:sbalukoff at bluebox.net]
Sent: Thursday, May 01, 2014 7:44 PM
To: OpenStack Development Mailing List (not for usage questions)
Subject: Re: [openstack-dev] [Neutron][LBaaS] Fulfilling Operator Requirements: Driver / Management API

Hi Adam,

Thank you very much for starting this discussion!  In answer do your questions from my perspective:

1. I think that it makes sense to start at least one new driver that focuses on running software virtual appliances on Nova nodes (the NovaHA you referred to above). The existing haproxy driver should not go away as I think it solves problems for small to medium size deployments, and does well for setting up, for example, a 'development' or 'QA' load balancer that won't need to scale, but needs to duplicate much of the functionality of the production load balancer(s).

On this note, we may want to actually create several different drivers depending on the appliance model that operators are using. From the discussion about HA that I started a couple weeks ago, it sounds like HP is using an HA model that concentrates on pulling additional instances from a waiting pool. The stingray solution you're using sounds like "raid 5" redundancy for load balancing. And what we've been using is more like "raid 1" redundancy.

It probably makes sense to collaborate on a new driver and model if we agree on the topologies we want to support at our individual organizations. Even if we can't agree on this, it still makes sense for us to collaborate on determining that "basic set of operator features" that all drivers should support, from an operator perspective.

I think a management API is necessary--  operators and their support personnel need to be able to troubleshoot problems down to the device level, and I think it makes sense to do this through an OpenStack interface if possible. In order to accommodate each vendor's differences here, though, this may only be possible if we allow for different drivers to expose "operator controls" in their own way.

I do not think any of this should be exposed to the user API we have been discussing.

I think it's going to be important to come to some kind of agreement on the user API and object model changes before it's going to be possible to start to really talk about how to do the management API.

I am completely on board with this! As I have said in a couple other places on this list, Blue Box actually wrote our own software appliance based load balancing system based on HAProxy, stunnel, corosync/pacemaker, and a series of glue scripts (mostly written in perl, ruby, and shell) that provide a "back-end API" and whatnot. We've actually done this (almost) from scratch twice now, and have plans and some work underway to do it a third time-- this time to be compatible with OpenStack (and specifically the Neutron LBaaS API, hopefully as a driver for the same). This will be completely open source, and hopefully compliant with OpenStack standards (equivalent licensing, everything written in python, etc.)  So far, I've only had time to port over the back-end API and a couple design docs, but if you want to see what we have in mind, here's the documentation on this so far:

https://github.com/blueboxgroup/octavia/

In particular, probably the theory of operation document will give you the best overview of how it works:

https://github.com/blueboxgroup/octavia/blob/master/doc/theory-of-operation.md

And the virtual appliance API (as it was two months ago. Some things will definitely change based on discussions of the last couple months):
https://github.com/blueboxgroup/octavia/blob/master/doc/virtual-appliance-api.md

Thanks,
Stephen


On Thu, May 1, 2014 at 2:33 PM, Adam Harwell <adam.harwell at rackspace.com<mailto:adam.harwell at rackspace.com>> wrote:
I am sending this now to gauge interest and get feedback on what I see as an impending necessity — updating the existing "haproxy" driver, replacing it, or both. Though we're not there yet, it is probably best to at least start the discussion now, to hopefully limit some fragmentation that may be starting around this concept already.

To begin with, I should probably define some terms. Following is a list of the major things I'll be referencing and what I mean by them, since I would like to avoid ambiguity as much as possible.

----------------------------------
---- Glossary
----------------------------------
HAProxy: This references two things currently, and I feel this is a source of some misunderstanding. When I refer to  HAProxy (capitalized), I will be referring to the official software package (found here: http://haproxy.1wt.eu/ ), and when I refer to "haproxy" (lowercase, and in quotes) I will be referring to the neutron-lbaas driver (found here: https://github.com/openstack/neutron/tree/master/neutron/services/loadbalancer/drivers/haproxy ). The fact that the neutron-lbaas driver is named directly after the software package seems very unfortunate, and while it is not directly in the scope of what I'd like to discuss here, I would love to see it changed to more accurately reflect what it is --  one specific driver implementation that coincidentally uses HAProxy as a backend. More on this later.

Operator Requirements: The requirements that can be found on the wiki page here:  https://wiki.openstack.org/wiki/Neutron/LBaaS/requirements#Operator_Requirements and focusing on (but not limited to) the following list:
* Scalability
* DDoS Mitigation
* Diagnostics
* Logging and Alerting
* Recoverability
* High Availability (this is in the User Requirements section, but will be largely up to the operator to handle, so I would include it when discussing Operator Requirements)

Management API: A restricted API containing resources that Cloud Operators could access, including most of the list of Operator Requirements (above).

Load Balancer (LB): I use this term very generically — essentially a logical entity that represents one "use case". As used in the sentence: "I have a Load Balancer in front of my website." or "The Load Balancer I set up to offload SSL Decryption is lowering my CPU load nicely."

----------------------------------
---- Overview
----------------------------------
What we've all been discussing for the past month or two (the API, Object Model, etc) is being directly driven by the User and Operator Requirements that have somewhat recently been enumerated (many thanks to everyone who has contributed to that discussion!). With that in mind, it is hopefully apparent that the current API proposals don't directly address many (or really, any) of the Operator requirements! Where in either of our API proposals are logging, high availability, scalability, DDoS mitigation, etc? I believe the answer is that none of these things can possibly be handled by the API, but are really implementation details at the driver level. Radware, NetScaler, Stingray, F5 and HAProxy of any flavour would all have very different ways of handling these things (these are just some of the possible backends I can think of). At the end of the day, what we really have are the requirements for a driver, which may or may not use HAProxy, that we hope will satisfy all of our concerns. That said, we may also want to have some form of "Management API" to expose these features in a common way.

In this case, we really need to discuss two things:

  1.  Whether to update the existing "haproxy" driver to accommodate these Operator Requirements, or whether to start from scratch with a new driver (possibly both).
  2.  How to expose these Operator features at the (Management?) API level.

----------------------------------
---- 1) Driver
----------------------------------
I believe the current "haproxy" driver serves a very specific purpose, and while it will need some incremental updates, it would be in the best interest of the community to also create and maintain a new driver (which it sounds like several groups have already begun work on — ack!) that could support a different approach. For instance, the current "haproxy" driver is implemented by initializing HAProxy processes on a set of shared hosts, whereas there has been some momentum behind creating individual Virtual Machines (via Nova) for each Load Balancer created, similar to Libra's approach. Alternatively, we could use LXC or a similar technology to more effectively isolate LBs and assuage concerns about tenant cross-talk (real or imaginary, this has been an issue for some customers). Either way, we'd probably need a brand new driver, to avoid breaking backwards compatibility with the existing driver (which does work perfectly fine in many cases). In fact, it's possible that when we begin discussing this as a broader community, we might decide to create more than one additional driver (depending on which approaches people want to use and what features are most important to them). The only concern I have about that outcome is the necessary amount of code-reuse, and whether it would be possible to share certain aspects of these drivers without too much copy/pasting.

An example of one possible new driver could be the following (just off the top of my head):
* Use a pair of new Nova VMs for each LB (Scalability), configured to use a Shared IP (High Availability).
* Log to Swift / Ceilometer (Logging / Alerting / Metering).
* Provide calls that could be exposed via a Management API to show low level diagnostic details (Diagnostics).
* Provide calls that could be exposed via a Management API to allow syncing/reloading existing LBs or moving them across clusters (Recoverability, DDoS Mitigation).
This new driver would be named to reflect what features it provides, or at least given a unique name that can be referenced without confusion (something like "OpenHA" or "NovaHA" would work if that's not taken).

----------------------------------
---- 2) Management API
----------------------------------
Going forward, it should then be required (can we enforce this?) that any mainline driver include support for calls to handle these named Operator Requirements, for example: obtaining logs (or log locations?), diagnostic information, and admin type actions including rebuilding or migrating LB instances. So far we haven't really talked about any of these features in depth, though I believe the general need for a Management API was alluded to on several occasions. Should we shelve this discussion until after we have the User API specification locked down? Should we begin defining a contract for this Management API at the summit, since it would be the main gateway to the Operator Requirements that we have all been stressing recently?

----------------------------------
---- Summary
----------------------------------
I would apologize for not having much concrete specification here, but I think it is better to validate my basic assumptions first, before jumping deeper down this rabbit hole. The type of comments I'm hoping to prompt are along the lines of:
* "We should just focus on the existing haproxy driver."
* "We should definitely collaborate to make a new driver as a community."
* "I don't think a Management API is necessary."
* "This is definitely what I was thinking we'd need to do."
 Anything specific implementation details I've mentioned are intended be taken as one possible example, not as a well thought out proposal. I am, as one might say, "speaking my mind". My hope is that some of this will simmer on the general subconscious. I'd like to hear what the general consensus is on these topics, because these are some of the assumptions I've been operating under during the rest of our discussions, and if they're invalid, I may need to rebase my view on the API discussion as a whole.

Thanks ya'll, I'm looking forward to getting some additional viewpoints!
--Adam Harwell (rm_work)

_______________________________________________
OpenStack-dev mailing list
OpenStack-dev at lists.openstack.org<mailto:OpenStack-dev at lists.openstack.org>
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev



--
Stephen Balukoff
Blue Box Group, LLC
(800)613-4305 x807
_______________________________________________
OpenStack-dev mailing list
OpenStack-dev at lists.openstack.org<mailto:OpenStack-dev at lists.openstack.org>
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20140502/c7154001/attachment.html>


More information about the OpenStack-dev mailing list