Hi! Tail-f driver seems to be configured correctly. DriverLog will poll Gerrit in the next 4 hours and update driver details screen. Regarding green mark on summary screen - it is shown for those drivers that have configured CI and CI ran at least once. But it doesn't take into account when the last successful run was. I suppose this mark may be changed to something like "CI health" and be green only if tests passed on master and were run during the last month. Thanks, Ilya 2014-06-10 18:33 GMT+04:00 Luke Gorrie <luke at tail-f.com>: > Howdy! > > Here is a successful Sandbox test from right now: > https://review.openstack.org/#/c/99061/. I don't immediately see how to > list all historical sandbox tests. (The previous ones are from before the > Summit anyway.) > > I enabled the CI for the openstack/neutron Gerrit feed now. Here is a > change that it tested right now: https://review.openstack.org/#/c/95526/. > (Voting is disabled on the account and the config conservatively is set to > vote 0 on failure.) > > Yes, I believe you can just submit a patch to DriverLog to reflect the >> current status. >> > > DriverLog is sourced from default_data.json ( > https://github.com/stackforge/driverlog/blob/master/etc/default_data.json#L1007)? > If so then it does reflect the current status: > > "ci": { > "id": "tailfncs", > "success_pattern": "Successful", > "failure_pattern": "Failed" > } > > i.e. it specifies which CI account is associated with this driver, and > that corresponds to a CI that is now up and running. > > > > _______________________________________________ > OpenStack-dev mailing list > OpenStack-dev at lists.openstack.org > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20140610/e694a9ce/attachment.html>