Open Stack

Vijay--

I'm confused: If NetScaler doesn't actually look at the SAN, isn't it not
actually following the SNI standard? (RFC2818 page 4, paragraph 2, as I
think Carlos pointed out in another thread.) Or at least, isn't that
ignoring how every major browser on the market that support SNI operates?

Anyway, per the other thread we've had on this, and Evgeny's proposal
there, do you see harm in having SAN available at the API level
(informationally, at least). In any case, duplication of code is something
I think we can all agree is not desirable, and because so many other
implementations are likely to need the SAN info, it should be available to
drivers via a universal library (as Carlos is describing).

Stephen


On Wed, Jul 16, 2014 at 3:43 PM, Eichberger, German <
german.eichberger at hp.com> wrote:

> +1 for not duplicating code
>
> For me it's scary as well if different implementation exhibit different
> behavior. This very contrary to what we would like to do with exposing LBs
> only as flavor...
>
> German
>
> -----Original Message-----
> From: Carlos Garza [mailto:carlos.garza at rackspace.com]
> Sent: Wednesday, July 16, 2014 2:05 PM
> To: OpenStack Development Mailing List (not for usage questions)
> Subject: Re: [openstack-dev] [Neutron][LBaaS] TLS capability -
> SubjectAlternativeNames (SAN)
>
>
> On Jul 16, 2014, at 3:49 PM, Carlos Garza <carlos.garza at rackspace.com>
> wrote:
>
> >
> > On Jul 16, 2014, at 12:30 PM, Vijay Venkatachalam
> > <Vijay.Venkatachalam at citrix.com>
> > wrote:
> >
> >    We will have the code that will parse the X509 in the API scope of
> the code. The validation I'm refering to is making sure the key matches the
> cert used and that we mandate that at a minimum the backend driver support
> RSA and that since the X509 validation is happeneing at the api layer this
> same module will also handling the extraction of the SANs. I am proposing
> that the methods that can extract the SAN SCN from the x509 be present in
> the api portion of the code and that drivers can call these methods if they
> need too. Infact I'm already working to get these extraction methods
> contributed to the PyOpenSSL project so that they will already available at
> a more fundemental layer then our nuetron/LBAAS code. At the very least I
> want to spec to declare that SAN SCN and parsing must be made available
> from the API layer. If the PyOpenSSL has the methods available at that time
> then I we can simply write wrappers for this in the API or simple write
> more higher level methods in the API module.
>
>     I meant to say bottom line I want the parsing code exposed in the API
> and not duplicated in everyone elses driver.
>
> >     I am partioally open to the idea of letting the driver handle the
> behavior of the cert parsing. Although I defer this to the rest of the
> folks as I get this feeling having differn't implementations exhibiting
> differen't behavior may sound scary.
> >
> >>
> >>                I think it is best not to mention about SAN in the
> OpenStack TLS spec. It is expected that the backend should implement
> according to the SSL/SNI IETF spec.
> >> Let's leave the implementation/validation part to the driver.  For ex.
> NetScaler does not support SAN and the NetScaler driver could either throw
> an error if certs with SAN are used or ignore it.
> >
> >    How is netscaler making the decision when choosing the cert to
> associate with the SNI handshake?
> >
> >>
> >> Does anyone see a requirement for detailing?
> >>
> >>
> >> Thanks,
> >> Vijay V.
> >>
> >>
> >> From: Vijay Venkatachalam
> >> Sent: Wednesday, July 16, 2014 8:54 AM
> >> To: 'Samuel Bercovici'; 'OpenStack Development Mailing List (not for
> usage questions)'
> >> Subject: RE: [openstack-dev] [Neutron][LBaaS] TLS capability - SNI -
> >> Extracting SubjectCommonName and/or SubjectAlternativeNames from X509
> >>
> >> Apologies for the delayed response.
> >>
> >> I am OK with displaying the certificates contents as part of the API,
> that should not harm.
> >>
> >> I think the discussion has to be split into 2 topics.
> >>
> >> 1.       Certificate conflict resolution. Meaning what is expected when
> 2 or more certificates become eligible during SSL negotiation
> >> 2.       SAN support
> >>
> >> I will send out 2 separate mails on this.
> >>
> >>
> >> From: Samuel Bercovici [mailto:SamuelB at Radware.com]
> >> Sent: Tuesday, July 15, 2014 11:52 PM
> >> To: OpenStack Development Mailing List (not for usage questions);
> >> Vijay Venkatachalam
> >> Subject: RE: [openstack-dev] [Neutron][LBaaS] TLS capability - SNI -
> >> Extracting SubjectCommonName and/or SubjectAlternativeNames from X509
> >>
> >> OK.
> >>
> >> Let me be more precise, extracting the information for view sake /
> validation would be good.
> >> Providing values that are different than what is in the x509 is what I
> am opposed to.
> >>
> >> +1 for Carlos on the library and that it should be ubiquitously used.
> >>
> >> I will wait for Vijay to speak for himself in this regard...
> >>
> >> -Sam.
> >>
> >>
> >> From: Stephen Balukoff [mailto:sbalukoff at bluebox.net]
> >> Sent: Tuesday, July 15, 2014 8:35 PM
> >> To: OpenStack Development Mailing List (not for usage questions)
> >> Subject: Re: [openstack-dev] [Neutron][LBaaS] TLS capability - SNI -
> >> Extracting SubjectCommonName and/or SubjectAlternativeNames from X509
> >>
> >> +1 to German's and  Carlos' comments.
> >>
> >> It's also worth pointing out that some UIs will definitely want to show
> SAN information and the like, so either having this available as part of
> the API, or as a standard library we write which then gets used by multiple
> drivers is going to be necessary.
> >>
> >> If we're extracting the Subject Common Name in any place in the code
> then we also need to be extracting the Subject Alternative Names at the
> same place. From the perspective of the SNI standard, there's no difference
> in how these fields should be treated, and if we were to treat SANs
> differently then we're both breaking the standard and setting a bad
> precedent.
> >>
> >> Stephen
> >>
> >>
> >> On Tue, Jul 15, 2014 at 9:35 AM, Carlos Garza <
> carlos.garza at rackspace.com> wrote:
> >>
> >> On Jul 15, 2014, at 10:55 AM, Samuel Bercovici <SamuelB at Radware.com>
> >> wrote:
> >>
> >>> Hi,
> >>>
> >>>
> >>> Obtaining the domain name from the x509 is probably more of a
> driver/backend/device capability, it would make sense to have a library
> that could be used by anyone wishing to do so in their driver code.
> >>
> >>    You can do what ever you want in *your* driver. The code to extract
> this information will be apart of the API and needs to be mentioned in the
> spec now. PyOpenSSL with PyASN1 are the most likely candidates.
> >>
> >> Carlos D. Garza
> >>>
> >>> -Sam.
> >>>
> >>>
> >>>
> >>> From: Eichberger, German [mailto:german.eichberger at hp.com]
> >>> Sent: Tuesday, July 15, 2014 6:43 PM
> >>> To: OpenStack Development Mailing List (not for usage questions)
> >>> Subject: Re: [openstack-dev] [Neutron][LBaaS] TLS capability - SNI -
> >>> Extracting SubjectCommonName and/or SubjectAlternativeNames from
> >>> X509
> >>>
> >>> Hi,
> >>>
> >>> My impression was that the frontend would extract the names and hand
> them to the driver.  This has the following advantages:
> >>>
> >>> *         We can be sure all drivers can extract the same names
> >>> *         No duplicate code to maintain
> >>> *         If we ever allow the user to specify the names on UI rather
> in the certificate the driver doesn't need to change.
> >>>
> >>> I think I saw Adam say something similar in a comment to the code.
> >>>
> >>> Thanks,
> >>> German
> >>>
> >>> From: Evgeny Fedoruk [mailto:EvgenyF at Radware.com]
> >>> Sent: Tuesday, July 15, 2014 7:24 AM
> >>> To: OpenStack Development Mailing List (not for usage questions)
> >>> Subject: [openstack-dev] [Neutron][LBaaS] TLS capability - SNI -
> >>> Extracting SubjectCommonName and/or SubjectAlternativeNames from
> >>> X509
> >>>
> >>> Hi All,
> >>>
> >>> Since this issue came up from TLS capabilities RST doc review, I
> opened a ML thread for it to make the decision.
> >>> Currently, the document says:
> >>>
> >>> "
> >>> For SNI functionality, tenant will supply list of TLS containers in
> >>> specific Order.
> >>> In case when specific back-end is not able to support SNI
> >>> capabilities, its driver should throw an exception. The exception
> >>> message should state that this specific back-end (provider) does not
> support SNI capability.
> >>> The clear sign of listener's requirement for SNI capability is a
> >>> none empty SNI container ids list.
> >>> However, reference implementation must support SNI capability.
> >>>
> >>> Specific back-end code may retrieve SubjectCommonName and/or
> >>> altSubjectNames from the certificate which will determine the
> >>> hostname(s) the certificate is associated with.
> >>>
> >>> The order of SNI containers list may be used by specific back-end
> >>> code, like Radware's, for specifying priorities among certificates.
> >>> In case when two or more uploaded certificates are valid for the
> >>> same DNS name and the tenant has specific requirements around which
> >>> one wins this collision, certificate ordering provides a mechanism
> >>> to define which cert wins in the event of a collision.
> >>> Employing the order of certificates list is not a common requirement
> >>> for all back-end implementations.
> >>> "
> >>>
> >>> The question is about SCN and SAN extraction from X509.
> >>> 1.       Extraction of SCN/ SAN should be done while provisioning and
> not during TLS handshake
> >>> 2.       Every back-end code/driver must(?) extract SCN and(?) SAN and
> use it for certificate determination for host
> >>>
> >>> Please give your feedback
> >>>
> >>> Thanks,
> >>> Evg
> >>> _______________________________________________
> >>> OpenStack-dev mailing list
> >>> OpenStack-dev at lists.openstack.org
> >>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
> >>
> >>
> >> _______________________________________________
> >> OpenStack-dev mailing list
> >> OpenStack-dev at lists.openstack.org
> >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
> >>
> >>
> >>
> >> --
> >> Stephen Balukoff
> >> Blue Box Group, LLC
> >> (800)613-4305 x807
> >> _______________________________________________
> >> OpenStack-dev mailing list
> >> OpenStack-dev at lists.openstack.org
> >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
> >
>
>
> _______________________________________________
> OpenStack-dev mailing list
> OpenStack-dev at lists.openstack.org
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>
> _______________________________________________
> OpenStack-dev mailing list
> OpenStack-dev at lists.openstack.org
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>



-- 
Stephen Balukoff
Blue Box Group, LLC
(800)613-4305 x807
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20140716/0f401d4e/attachment.html>