[openstack-dev] [Openstack] Fwd: [keystone] Tokens representing authorization to projects/tenants in the Keystone V3 API

Jorge Williams jorge.williams at rackspace.com
Thu Nov 15 14:20:55 UTC 2012


No, it's optional.

Token validation returns what it normally does.  The only thing belongs to does is that you fail token validation if the given tenant is not covered by the scope of the token.

-jOrGe W.

On Nov 14, 2012, at 11:18 PM, Yee, Guang wrote:

> Is "belongsTo" mandatory? If not, what will token validation API return?
> 
> {"access": [list of tokens]}
> 
> ?
> 
> 
> Guang
> 
> 
> -----Original Message-----
> From: Jorge Williams [mailto:jorge.williams at rackspace.com] 
> Sent: Wednesday, November 14, 2012 2:47 PM
> To: OpenStack Development Mailing List
> Cc: openstack at lists.launchpad.net (openstack at lists.launchpad.net)
> Subject: Re: [openstack-dev] [Openstack] Fwd: [keystone] Tokens representing
> authorization to projects/tenants in the Keystone V3 API
> 
>> From an API perspective the changes required are the following:
> 
> 	1.  The validate call returns a list of tenants instead of a single
> tenant.
> 
> If the tenant id is in the URI of the API, then the validation middleware
> can assert that the tenant id is in the list of IDs.
> 
> Not sure if there's any additional changes, but I don't think so.
> 
> An alternative approach is to use the belongsTo query parameter in the
> validate call.  So if you know the tenantId of the resource, you can issue a
> validate with ?belongsTo="tenatId"  and validation if the tenant is not in
> the list of tenatIds for the token.  The belongsTo query parameter is in the
> validate token call in the API today
> 
> http://docs.openstack.org/api/openstack-identity-service/2.0/content/GET_val
> idateToken_v2.0_tokens__tokenId__Admin_API_Service_Developer_Operations-d1e1
> 356.html
> 
> And we use it quite a bit in our implementation, when we validate tokens --
> that is in the case where a token may have access to multiple tenants.
> 
> Thoughts?
> 
> -jOrGe W.
> 
> 
> On Nov 14, 2012, at 3:53 PM, heckj wrote:
> 
>> If we're going to assert it's supported, we're doing an incredible
> dis-service to writing a spec to not implement that aspect of the spec, as
> that kind of set up just leads to incompatibilities and confusion when
> asserting how the spec should be used to provide interoperability.
>> 
>> If we accept this as a spec addition, then we MUST have an implementation
> that makes it clear how we expect to interoperate with that aspect of the
> specification, even if it's a configuration option that we don't normally
> enable. If we don't test and validate it to prove interoperability, then the
> spec is a worthless digital "piece of paper".
>> 
>> So under that pretext, I welcome suggestions on how to interpret the spec
> you're proposing to some concrete implementations that can be verified for
> interoperability, and that are compatible with the existing and/or upcoming
> implementations for V3 API.
>> 
>> -joe
>> 
>> On Nov 14, 2012, at 1:35 PM, Joe Savak <joe.savak at RACKSPACE.COM> wrote:
>>> Hi Joe,
>>> 	If I'm working across multiple tenants, I'd prefer one token that I
> can securely handle that proves access rights to the tenants I'm working
> with. Handling multiple tokens increases the complexity of clients needing
> to provide multi-tenancy access to an authenticated identity. It also adds
> more calls to keystone. 
>>> 
>>> Again, I think that having the keystone reference implementation restrict
> tokens to 1 tenant is fine. We shouldn't have such arbitrary restrictions in
> the API contract though. It needs to be extensible and flexible to allow for
> the all sorts of use cases that are likely to occur.
>>> 
>>> Thanks,
>>> joe
>>> 
>>> -----Original Message-----
>>> From: heckj [mailto:heckj at mac.com] 
>>> Sent: Tuesday, November 13, 2012 3:59 PM
>>> To: Joe Savak
>>> Cc: OpenStack Development Mailing List; openstack at lists.launchpad.net
> (openstack at lists.launchpad.net)
>>> Subject: Re: [Openstack] [openstack-dev] Fwd: [keystone] Tokens
> representing authorization to projects/tenants in the Keystone V3 API
>>> 
>>> Hey Joe:
>>> 
>>> Currently a user scoped token doesn't include a service catalog - mostly
> because I think the service catalog generally requires tenant_id's to
> interpolate into the values to provide it. That doesn't mean we can't put
> in/include service catalog endpoints where that value doesn't need to be
> determined.
>>> 
>>> I'm also questioning the value of providing a token scoped to all tenants
> associated with a user - that seems to have the same value as just using a
> user token. 
>>> 
>>> In fact, even if we allow some arbitrary set of tenants to be scoped into
> a token along with a user, what on earth should be in the service catalog?
> Endpoints relevant to every possible tenant?
>>> 
>>> This just seems to be a potential explosion of data that is poorly scoped
> from a security perspective.
>>> 
>>> -joe
>>> 
>>> On Nov 13, 2012, at 1:42 PM, Joe Savak <joe.savak at RACKSPACE.COM> wrote:
>>>> Will user-scoped token include the full service catalog? 
>>>> 
>>>> Also, I thought the consensus was to allow the API contract to be
> flexible on how many tenants we can scope the token to. The ref impl can
> enforce 1 tenant-scoped token. Are we diverging from this?
>>>> 
>>>> Thanks,
>>>> joe
>>>> 
>>>> -----Original Message-----
>>>> From: openstack-bounces+joe.savak=rackspace.com at lists.launchpad.net
> [mailto:openstack-bounces+joe.savak=rackspace.com at lists.launchpad.net] On
> Behalf Of heckj
>>>> Sent: Tuesday, November 13, 2012 1:34 PM
>>>> To: OpenStack Development Mailing List
>>>> Cc: openstack at lists.launchpad.net (openstack at lists.launchpad.net)
>>>> Subject: Re: [Openstack] [openstack-dev] Fwd: [keystone] Tokens
> representing authorization to projects/tenants in the Keystone V3 API
>>>> 
>>>> 
>>>> On Nov 13, 2012, at 11:01 AM, Jorge Williams
> <jorge.williams at rackspace.com> wrote:
>>>>> On Nov 13, 2012, at 11:35 AM, heckj wrote:
>>>>>> So maintaining a token scoped to just the user, and a mechanism to
> scope it to a tenant sound like all goodness. We can absolutely keep the API
> such that it can provide either. 
>>>>>> 
>>>>>> Right now, our auth_token middleware implicitly requires a tenant in
> that scoping to work. If someone wanted to support a token scoped to just a
> user for the services, they'd need a different middleware there. Keystone as
> a service *doesn't* use the auth_token middleware, so with the V3 API we can
> make it provide services appropriately based on a token scoped only to the
> user.
>>>>>> 
>>>>>> All that in place, allow a token to be indeterminate scoped to
> multiple tenants is fraught with security flaws, and if we continue to
> provide unscoped tokens, that should obviate the need for token scoped to
> multiple tenants. 
>>>>> 
>>>>> I'm not sure I'm following you there.  I don't see how unscoped tokens
> obviate the need to scope to multiple tenants, these may be driven by
> different concerns. 
>>>>> 
>>>>> Again, I think we need to have some flexibility in how we scope tokens.
> The API should be flexible enough to support different models -- I think
> that scoping a token to multiple tenants is useful in cases such as
> delegation -- where a single identity may be issued revokable access to a
> set of resources in multiple projects.
>>>> 
>>>> The consensus from the folks weighing in on this from a security
> perspective seems to be that it's kosher to restrict tokens further (the
> least privilege thing). Broadening the scope to multiple tenants or sets of
> tenants doesn't appear to follow those best practices. If you wanted to
> accept a less-scoped token than the scoped to single tenant, you can accept
> and use a user-scoped token, at least by my read.
>>>> 
>>>> -joe
>>>> 
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Mailing list: https://launchpad.net/~openstack
>>>> Post to     : openstack at lists.launchpad.net
>>>> Unsubscribe : https://launchpad.net/~openstack
>>>> More help   : https://help.launchpad.net/ListHelp
>>> 
>> 
>> 
>> _______________________________________________
>> OpenStack-dev mailing list
>> OpenStack-dev at lists.openstack.org
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
> 
> 
> _______________________________________________
> OpenStack-dev mailing list
> OpenStack-dev at lists.openstack.org
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
> _______________________________________________
> Mailing list: https://launchpad.net/~openstack
> Post to     : openstack at lists.launchpad.net
> Unsubscribe : https://launchpad.net/~openstack
> More help   : https://help.launchpad.net/ListHelp




More information about the OpenStack-dev mailing list