We enthusiastically announce the release of: python-tripleoclient 16.5.0: TripleO client This release is part of the wallaby stable release series. The source is available from: https://opendev.org/openstack/python-tripleoclient Download the package from: https://tarballs.openstack.org/python-tripleoclient/ Please report issues through: https://bugs.launchpad.net/tripleo/+bugs For more details, please see below. 16.5.0 ^^^^^^ Prelude ******* During a minor update of the overcloud. It was previously necessary to execute 3 steps. - Update Prepare - Update Run - Update Converge Starting in W, it is no longer necessary to perform a Stack update during the converge. This change removes the stack update from the converge step. Now, we will just run the deploy_steps_playbook instead. New Features ************ * Added options for "overcloud delete" command to unprovision networks provisioned with "overcloud deploy" or with "overcloud network provision". * Added options for "overcloud delete" command to unprovision nodes and network ports provisioned with "overcloud deploy". * The Admin Authorize command can now be targeted at specific nodes using '--limit'. It can also take a custom static-inventory using ' --static-inventory'. * The commands *openstack overcloud node import* and *openstack overcloud node configure* now have a --boot-mode arguement which allows the boot mode for all affected nodes to be set to UEFI boot (uefi) or legacy BIOS boot (bios). This allows some nodes to have a different boot mode to the default (uefi). * Two new commands, "openstack overcloud ceph user enable" and "openstack overcloud ceph user disable" are added. The "enable" option will create the cephadm SSH user and distribute their SSH keys to Ceph nodes in the overcloud. The "disable" option may be run after "openstack overcloud ceph deploy" has been run to disable cephadm so that it may not be used to administer the Ceph cluster and no "ceph orch ..." CLI commands will function. This will also prevent Ceph node overcloud scale operations though the Ceph cluster will still be able to read/write data. The "ceph user disable" option will also remove the public and private SSH keys of the cephadm SSH user on overclouds which host Ceph. The "ceph user enable" option may also be used to re-distribute the public and private SSH keys of the cephadm SSH user and re-enable the cephadm mgr module. * A new command "openstack overcloud ceph deploy" is added. The command is used to deploy Ceph after the hardware has been provisioned with networking and before the overcloud is deployed. The command takes the output of "openstack overcloud node provision" as input and returns a Heat enviornment file, e.g. deployed_ceph.yaml, as output. The deployed_ceph.yaml file may then be passed to the "openstack overcloud deploy" command as input. During overcloud deployment the Ceph cluster is then configured to host OpenStack. E.g. cephx keys and pools are still created on the Ceph cluster by "openstack overcloud deploy". * The cli arguments that control what parts of the deployment to execute have been refactored to better align with the user expected intention, --stack-only: create the stack, download the config. no overcloud node changes --setup-only: ssh admin authorization setup. --config-download-only: run config-download playbook(s) to configure the overcloud. Deprecation Notes ***************** * The "--local" argument to the "openstack overcloud image upload" command has been deprecated and a "--no-local" argument has been added. Earlier we used to fallback to upload locally when glance was not available. As glance is not installed in the undercloud by default, we would upload images locally unless "--no-local" is used. * The "openstack tripleo validator" CLI has been deprecated in favor the "validation" CLI. +--------------------------------------------+---------------------------+ | Old CLI sub commands | New CLI sub commands | +--------------------------------------------+---------------------------+ | openstack tripleo validator list | validation list | | openstack tripleo validator show | validation show | | openstack tripleo validator group info | validation show group | | openstack tripleo validator show parameter | validation show parameter | | openstack tripleo validator show history | validation history list | | openstack tripleo validator show run | validation history get | +--------------------------------------------+---------------------------+ Bug Fixes ********* * Fixes Admin Authorize to work with Ephemeral Heat. Other Notes *********** * Stack outputs that are needed by other functionality of the overcloud deployment are now saved in the stack working directory in an outputs subdirectory (default ~/overcloud- deploy/<stack>/outputs). Changes in python-tripleoclient 16.4.0..16.5.0 ---------------------------------------------- 6c76392b Changing MD5 hash to SHA512 015e0226 Adding --repo-dir argument fe6ed229 Fix overcloud node provide 96fae228 Check old passwords file path during uc validation 0aefaf3f Write clouds.yaml/heatrc for tripleo launch heat c8701473 Fix deploy templates arg validation 60ce1c06 Use 127.0.0.1 for ephemeral Heat server instead of ctlplane ip c41459a6 Handle missing ipv6 boolean in network_data.yaml for Ceph c2e4b487 overcloud node extract provisioned - fixed_ips 4e2ba687 node extract provisioned - use network_config_update 86483150 Don't assume json network config in validations a1912be8 Don't set 'subnet' for ctlplane in node extract 8aeed5ec Don't run playbooks if role count == 0 003c96b9 Add the ability to enable/disable cephadm SSH user 06a82e0e make net_config_override of undercloud.conf work with yaml eadbcec0 Use netaddr when comparing local_ip for changes 8223cb7c Fix ports cleanup on node unprovision 8baae032 Skip Heat pod container image pull for default ephemeral heat images fa9dcd54 Pass crush hierarchy data as extra_var 96d37480 Donot install policycoreutils-python for cs9 e84c2e11 Fix the validations_log_basedir overriding 1de4a4e3 Set Ceph ms_bind options for IPv6 ac828a2c Support custom network names with deployed ceph 7dc140b7 bnr CLI enable the conf. of ReaR with ironic on nodes 7ba9e8b3 [WALLABY-ONLY] Deprecation of the "openstack tripleo validator" CLI 293b8434 UC/Standalone - Set ip_version in DeployedServerPortMap 914709dd Ensure we're using the stackname for the inventory d71f64ed Integrating restoration process to client 03221f21 Remove --skip-nodes-and-networks fd18a8ea Replace deprecated params in prepare d4223329 Remove update converge bdfcb56d Refactor --stack-only, --setup-only, --config-download-only e2f3acd1 Add additional saved stack outputs 6da69f44 Save needed stack outputs in working_dir e5b308ee Fix --stack-only to download ansible playbooks bcbe3c1f Update playbooks to use consistent working dir b4cb0064 Fix overcloud admin authorize 71633a13 Fix node scaling for Ephemeral Heat f43317cb Baremetal deploy - user playbook interface c22f23a0 Drop minion 3e9c1926 Deprecate and ignore --skip-nodes-and-networks cfcc4a16 Always run growvols playbook after provision ce676979 Add --boot-mode to import and configure d62bdace Only use undercloud.conf ipxe_enabled for inspection ba988230 Don't write <stack_name>-passwords.conf 8328e7b1 Check for passwords at old path during tripleo deploy ea2877f1 Image upload: handle whole-disk image as default 6ed5f201 Deprecate overcloud image upload to glance 1e1394a6 Drop python2 logic for upgrades 18a30e62 Use real tmpdir for ansible runner tests 4a0be73b bnr enabled ramdisk as deploy interfaces on the ironic/undercloud 64732f93 Remove ipxe_enabled ppc64le validation 86584175 Remove zaqar ff41e5dd Remove mistral 42f9f7a4 Deprecate network data v1 definition 3d615ea4 Dynamic defaults for roles, networks, vips and bm cf63f0da Update deployment status after upgrade converge e97d9e7b Fix update run for Ephemeral Heat 7b9bf2fe Return "overcloud status" output without debug b0537457 Update overcloud deploy help for default heat type 592c793f Add `--heat-type` in overcloud delete ef151db5 Eliminating a race condition in the export_stack function 351bc64f Allow to pass arbitrary parameters to TCIB image config 06c7d4d3 Add network unprovision to overcloud delete 3351ef1c Update default images for "tripleo launch heat" d35ec2fb New test case and documentation for the export_stack function. e1c2fc73 Setting upper constraints to wallaby branch of requirements 1450b166 Moving the 'export_data' dict into constants ea451c4d Add node, port unprovision to overcloud delete a5d144ff Introduce "openstack overcloud ceph deploy" e81ced6f Restore kernel and ramdisk arguments to node configure 13f7f2fc Fetch stack after updating it bf7392db Make the "success" message more "success"-like b437a87e Workaround py36 encoding pip bug 7e490d4f Use 'all' for ANSIBLE_VARS_PLUGIN_STAGE a88ba376 Remove deprecation warnings for the role command 06184adb Fix get_deployment_status() for ephemeral heat 035f9b6a Remove name parameter from cell export 2c5b1cc5 Deprecate --network-ports, enable it by default 40e6f60c Implement protected resource types 7f6ac642 Fix 'cell export' no attribute exception Diffstat (except docs and test files) ------------------------------------- bindep.txt | 2 +- ...rovision-overcloud-delete-5c36ff706ab809ea.yaml | 5 + ...rovision-overcloud-delete-c7dd063912d4ebca.yaml | 5 + ..._args_for_admin_authorize-2fe6945515dd34a7.yaml | 9 + releasenotes/notes/boot_mode-ef25d1a032dcae56.yaml | 7 + ...ser_disable_and_re_enable-18f3102031a802d0.yaml | 17 + ...ecate-glance-image-upload-ef23d3078f430ccf.yaml | 9 + ...ack-tripleo-validator-cli-2612ab3234f506b0.yaml | 18 + ...hemeral-heat-minor-update-db24c2f190c1c8a7.yaml | 10 + .../overcloud_ceph_deploy-485f59b64eb93c70.yaml | 11 + .../refactor-only-cli-args-cb70ed8ba8b166a9.yaml | 10 + .../notes/save-stack-outputs-61c2ad9528ae2529.yaml | 5 + releasenotes/source/index.rst | 1 + releasenotes/source/wallaby.rst | 6 + requirements.txt | 2 +- setup.cfg | 22 +- tox.ini | 35 +- tripleoclient/config/minion.py | 158 ----- tripleoclient/config/standalone.py | 12 +- tripleoclient/config/undercloud.py | 7 +- tripleoclient/constants.py | 47 +- tripleoclient/exceptions.py | 4 + tripleoclient/export.py | 73 +- tripleoclient/heat_launcher.py | 17 +- tripleoclient/plugin.py | 73 -- .../v1/overcloud_deploy/test_overcloud_deploy.py | 117 +++- .../v1/overcloud_image/test_overcloud_image.py | 101 ++- .../minion => overcloud_restore}/__init__.py | 0 .../v1/overcloud_update/test_overcloud_update.py | 35 - .../v1/overcloud_upgrade/test_overcloud_upgrade.py | 4 +- .../test_tripleo_container_image.py | 30 +- .../v2/overcloud_delete/test_overcloud_delete.py | 81 ++- .../v2/overcloud_network/test_overcloud_network.py | 6 + tripleoclient/utils.py | 534 +++++++++++++-- tripleoclient/v1/minion_config.py | 421 ------------ tripleoclient/v1/overcloud_admin.py | 62 +- tripleoclient/v1/overcloud_backup.py | 26 +- tripleoclient/v1/overcloud_cell.py | 15 +- tripleoclient/v1/overcloud_deploy.py | 515 +++++++++------ tripleoclient/v1/overcloud_external_update.py | 5 +- tripleoclient/v1/overcloud_external_upgrade.py | 5 +- tripleoclient/v1/overcloud_image.py | 60 +- tripleoclient/v1/overcloud_node.py | 97 +-- tripleoclient/v1/overcloud_restore.py | 147 +++++ tripleoclient/v1/overcloud_roles.py | 13 +- tripleoclient/v1/overcloud_update.py | 118 ++-- tripleoclient/v1/overcloud_upgrade.py | 32 +- tripleoclient/v1/tripleo_deploy.py | 46 +- tripleoclient/v1/tripleo_launch_heat.py | 24 +- tripleoclient/v1/tripleo_validator.py | 133 ++++ tripleoclient/v1/undercloud.py | 16 +- tripleoclient/v1/undercloud_config.py | 21 +- tripleoclient/v1/undercloud_minion.py | 162 ----- tripleoclient/v1/undercloud_preflight.py | 36 +- tripleoclient/v2/overcloud_ceph.py | 634 ++++++++++++++++++ tripleoclient/v2/overcloud_delete.py | 74 ++- tripleoclient/v2/overcloud_network.py | 39 ++ tripleoclient/v2/overcloud_node.py | 43 +- tripleoclient/v2/tripleo_container_image.py | 38 +- tripleoclient/workflows/baremetal.py | 52 +- tripleoclient/workflows/deployment.py | 146 ++-- tripleoclient/workflows/parameters.py | 42 +- tripleoclient/workflows/roles.py | 12 +- tripleoclient/workflows/scale.py | 230 ------- zuul.d/layout.yaml | 13 - 86 files changed, 4327 insertions(+), 2603 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 9c80b5a5..3616e4e8 100644 --- a/requirements.txt +++ b/requirements.txt @@ -19 +19 @@ ansible-runner>=1.4.5 # Apache 2.0 -validations-libs>=1.1.0 # Apache-2.0 +validations-libs>=1.2.0 # Apache-2.0