- Release-announce - lists.openstack.org

ironic-inspector 10.3.0 (victoria)
by no-reply＠openstack.org 14 Aug '20

14 Aug '20

We are delighted to announce the release of: ironic-inspector 10.3.0: Hardware introspection for OpenStack Bare Metal This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/ironic-inspector Download the package from: https://tarballs.openstack.org/ironic-inspector/ Please report issues through: https://storyboard.openstack.org/#!/project/944 For more details, please see below. 10.3.0 ^^^^^^ New Features ************ * The new API "GET /v1/introspection/<node>/data/unprocessed" allows retrieving raw (unprocessed) data if data store is enabled. Upgrade Notes ************* * API now listens on "::" by default, change the "listen_address" configuration option to modify. Bug Fixes ********* * The "extra_hardware" processing hook no longer refuses to parse extra data if some records are empty or have unexpected length. These records are now discared. The previous behavior can be returned by setting the new option "[extra_hardware]strict" to "True". * The "extra_hardware" processing hook no longer removes the incoming "data" object if it has unexpected data format, assuming that this object is used for something else. The previous behavior can be returned by setting the new option "[extra_hardware]strict" to "True". * Using auth_strategy=http_basic incorrectly required authentication for public paths such as / and /v1. These paths are now public. * Fixes an issue which may occur with Apache httpd webservers acting as a proxy where the server may report "Bad Gateway", however inspector continues operating as if there was no problem. This was due to a lack of a "Content-Type" header on HTTP 202 and 204 replies, and lack of message body with HTTP 202 messages which Apache httpd can error upon. * No longer tries to set "local_gb" to -1 if the matched root device has size of zero. Changes in ironic-inspector 10.2.0..10.3.0 ------------------------------------------ 523c52d Fix requirements job 9de65e3 Normalize formatting in the API versions reference 6a8d46b Listen on :: by default 3243cac Relax extra_hardware data validation by default a5e8cce CI: run doc8 on api-ref bd16d80 Remove built-in API documentation in favour of API-REF cc7fcf4 Add support for retrieving unprocessed data 92c6422 Add public api support to basic auth 6e2cb60 Respond so Apache HTTPd doesn't think the request failed 32d68ef Set min version of tox to 3.2.1 039844a Make inspector base CI job use 2 CPUs 95e103d Do not try to set local_gb to -1 when the matched root device size is 0 a1f8926 Remove non-inclusive language in pxe filter Diffstat (except docs and test files) ------------------------------------- CONTRIBUTING.rst | 3 +- api-ref/source/index.rst | 9 +- api-ref/source/introspection-api-v1-continue.inc | 4 +- ...trospection-api-v1-introspection-management.inc | 42 +++ api-ref/source/introspection-api-versions.inc | 44 ++- api-ref/source/parameters.yaml | 36 +- devstack/plugin.sh | 1 - ironic_inspector/conf/__init__.py | 2 + ironic_inspector/conf/default.py | 2 +- ironic_inspector/conf/extra_hardware.py | 33 ++ ironic_inspector/conf/opts.py | 3 +- ironic_inspector/introspect.py | 6 +- ironic_inspector/main.py | 55 ++- ironic_inspector/node_cache.py | 2 + ironic_inspector/plugins/extra_hardware.py | 70 ++-- ironic_inspector/plugins/standard.py | 16 +- ironic_inspector/pxe_filter/dnsmasq.py | 110 +++--- ironic_inspector/pxe_filter/iptables.py | 28 +- ironic_inspector/test/functional.py | 15 +- .../test/unit/test_dnsmasq_pxe_filter.py | 84 ++--- ironic_inspector/test/unit/test_iptables.py | 54 +-- ironic_inspector/test/unit/test_main.py | 42 ++- .../test/unit/test_plugins_extra_hardware.py | 70 +++- .../test/unit/test_plugins_standard.py | 10 + ironic_inspector/utils.py | 44 ++- lower-constraints.txt | 2 +- .../notes/extra-check-9cf0a7d89e534ccd.yaml | 16 + .../http-basic-public-api-2cf0e206bea4b34e.yaml | 5 + releasenotes/notes/listen-v6-effec95455e900f8.yaml | 5 + .../reply-with-content-type-644b741261c87c8c.yaml | 9 + .../notes/unprocessed-07842e56eb60e253.yaml | 5 + releasenotes/notes/zero-size-55c4b4f2b9e8384d.yaml | 5 + requirements.txt | 4 +- tox.ini | 4 +- zuul.d/ironic-inspector-jobs.yaml | 1 + 40 files changed, 628 insertions(+), 648 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 27b08bb..a31f8d9 100644 --- a/requirements.txt +++ b/requirements.txt @@ -8 +8 @@ eventlet!=0.18.3,!=0.20.1,>=0.18.2 # MIT -Flask>=1.0 # BSD +Flask>=1.1.0 # BSD @@ -11 +11 @@ ironic-lib>=4.3.0 # Apache-2.0 -jsonpath-rw<2.0,>=1.2.0 # Apache-2.0 +jsonpath-rw>=1.2.0 # Apache-2.0

1 0

glance_store 2.2.0 (victoria)
by no-reply＠openstack.org 14 Aug '20

14 Aug '20

We are happy to announce the release of: glance_store 2.2.0: OpenStack Image Service Store Library This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/glance_store Download the package from: https://pypi.org/project/glance_store For more details, please see below. 2.2.0 ^^^^^ Bug Fixes * Bug #1884482 (https://bugs.launchpad.net/cinder/+bug/1884482) Blocked creation of images on encrypted nfs volumes when glance store is cinder. Changes in glance_store 2.1.0..2.2.0 ------------------------------------ 3b71ce2 Copy data files to glance upon installation e9c3d14 [Trivial]Add missing white space between words 100fe26 [goal] Migrate glance_store jobs to focal 1f50f31 zuul: glance_store-src-ceph-tempest replaces a legacy job 30bd030 use stevedore to load extensions d519bb5 requirements: Drop os-testr 31bd6ad Fix mock import in unit tests becd574 Don't allow image creation with encrypted nfs volumes 3d47607 Stop to use the __future__ module. ab4c9fd Cap jsonschema 3.2.0 as the minimal version Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 23 ++++++++++-- glance_store/_drivers/cinder.py | 15 ++++++++ glance_store/_drivers/rbd.py | 2 -- glance_store/common/fs_mount.py | 2 +- lower-constraints.txt | 3 +- ...ing-encrypted-nfs-volumes-d0ff370ab762042e.yaml | 6 ++++ requirements.txt | 2 +- setup.cfg | 5 +++ test-requirements.txt | 1 - tools/install_venv.py | 2 -- tools/install_venv_common.py | 2 -- 14 files changed, 96 insertions(+), 42 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index e217936..e537c3a 100644 --- a/requirements.txt +++ b/requirements.txt @@ -13 +13 @@ six>=1.10.0 # MIT -jsonschema>=2.6.0 # MIT +jsonschema>=3.2.0 # MIT diff --git a/test-requirements.txt b/test-requirements.txt index e8fe8d0..988fbc3 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -21 +20,0 @@ oslotest>=3.2.0 # Apache-2.0 -os-testr>=1.0.0 # Apache-2.0

1 0

glance 19.0.4 (train)
by no-reply＠openstack.org 12 Aug '20

12 Aug '20

We are stoked to announce the release of: glance 19.0.4: OpenStack Image Service This release is part of the train stable release series. The source is available from: https://opendev.org/openstack/glance Download the package from: https://tarballs.openstack.org/glance/ Please report issues through: https://bugs.launchpad.net/glance/+bugs For more details, please see below. 19.0.4 ^^^^^^ Bug Fixes * Bug 1855708: Reload broken in PY3 (https://bugs.launchpad.net/glance/+bug/1855708) * Bug 1887994: Mixed message in admin docs to deploy under httpd (https://bugs.launchpad.net/glance/+bug/1887994) * Bug 1888349: glance-cache-manage utility is broken * Bug 1886374: Improve lazy loading mechanism for multiple stores (https://code.launchpad.net/bugs/1888349) (https://code.launchpad.net/bugs/1886374) Changes in glance 19.0.3..19.0.4 -------------------------------- 5bbd3567 Fix formatting error in release note 19ab997f Releasenotes for Train point release 27732251 Fix broken glance-cache-manage utility 7f690381 Return the mod_proxy_uwsgi paragraph f3cbe90b Fix reloading under PY3 b264d5bf Fix admin docs deploying under HTTPD baf6b5eb Improve lazy loading mechanism for multiple stores bdba1fea Use grenade-multinode instead of the custom legacy job 8abe20d5 zuul: switch to the "plain" grenade job here too Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 17 +-- glance/api/authorization.py | 12 +- glance/api/v2/images.py | 12 +- glance/common/store_utils.py | 35 +++-- glance/common/utils.py | 11 +- glance/common/wsgi.py | 4 +- .../legacy/glance-dsvm-grenade-multinode/post.yaml | 15 --- .../legacy/glance-dsvm-grenade-multinode/run.yaml | 45 ------- .../notes/Fix_reload_PY3-e8a5bd337a77be1a.yaml | 6 + .../notes/fix_httpd_docs-3efff0395f96a94d.yaml | 6 + .../train-point-release-5215aac30150a9cb.yaml | 11 ++ 20 files changed, 301 insertions(+), 256 deletions(-)

1 0

glance 20.0.1 (ussuri)
by no-reply＠openstack.org 12 Aug '20

12 Aug '20

We are delighted to announce the release of: glance 20.0.1: OpenStack Image Service This release is part of the ussuri stable release series. The source is available from: https://opendev.org/openstack/glance Download the package from: https://tarballs.openstack.org/glance/ Please report issues through: https://bugs.launchpad.net/glance/+bugs For more details, please see below. 20.0.1 ^^^^^^ Bug Fixes * Bug 1881958: read-only http store should not be used if --all- stores specified for import/copy image workflow (https://bugs.launchpad.net/glance/+bug/1881958) * Bug 1889640: Image import might result 'active' image with no data. (https://bugs.launchpad.net/glance/+bug/1889640) * Bug 1889676: "stores" can be set as property breaking multistore indication of stores where the images are present (https://bugs.launchpad.net/glance/+bug/1889676) * Bug 1887994: Mixed message in admin docs to deploy under httpd (https://bugs.launchpad.net/glance/+bug/1887994) * Bug 1885725: 'copy-image' import job should not run additional plugins (https://code.launchpad.net/bugs/1885725) * Bug 1888349: glance-cache-manage utility is broken * Bug 1886374: Improve lazy loading mechanism for multiple stores * Bug 1885003: Interrupted copy-image may break a subsequent operation * Bug 1884587: image import copy-image API should reflect proper authorization (https://code.launchpad.net/bugs/1888349) (https://code.launchpad.net/bugs/1886374) (https://code.launchpad.net/bugs/1885003) (https://code.launchpad.net/bugs/1884587) Changes in glance 20.0.0..20.0.1 -------------------------------- d63d7279 Fix active image when all uploads fail 2b3ce07c Fix active image without data 69848bfc Add "stores" to disallowed properties 9cee9a68 Releasenotes for Ussuri point release 8626777d Fix formatting error in release note 1bb6a32b Fix broken glance-cache-manage utility 3a8fc940 Fix admin docs deploying under HTTPD 9a104acb Improve lazy loading mechanism for multiple stores 2df2792f Don't include plugins on 'copy-image' import 72510f9c Fix: Interrupted copy-image leaking data on subsequent operation fcba0398 Check authorization before import for image 0855cc1e Use grenade-multinode instead of the custom legacy job c3fd60f7 Exclude http store if --all-stores specified for import/copy operation f78463ed Switch to new grenade job name Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 17 +-- glance/api/authorization.py | 12 +- glance/api/v2/images.py | 18 ++- .../async_/flows/_internal_plugins/copy_image.py | 21 ++- glance/async_/flows/api_image_import.py | 61 ++++++--- glance/common/store_utils.py | 35 +++-- glance/common/utils.py | 4 + glance/common/wsgi.py | 4 +- .../unit/async_/flows/test_api_image_import.py | 94 +++++++++++++ .../legacy/glance-dsvm-grenade-multinode/post.yaml | 15 --- .../legacy/glance-dsvm-grenade-multinode/run.yaml | 46 ------- .../notes/bug-1881958-d0e16538f3c0ffaa.yaml | 6 + .../notes/fix_1889640-95d543629d7dadce.yaml | 6 + .../notes/fix_1889676-f8d302fd240c8a57.yaml | 6 + .../notes/fix_httpd_docs-3efff0395f96a94d.yaml | 6 + ...no_plugins_for_copy-image-26c0e384a368bf6a.yaml | 6 + .../ussuri-point-release-35cdd66344a3f62c.yaml | 16 +++ 27 files changed, 662 insertions(+), 252 deletions(-)

1 0

python-glanceclient 3.2.1 (victoria)
by no-reply＠openstack.org 12 Aug '20

12 Aug '20

We are satisfied to announce the release of: python-glanceclient 3.2.1: OpenStack Image API Client Library This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/python-glanceclient Download the package from: https://pypi.org/project/python-glanceclient Please report issues through: https://bugs.launchpad.net/python-glanceclient/+bugs For more details, please see below. 3.2.1 ^^^^^ Bug Fixes * Bug 1889666: 'stores' property added when using image-create-via- import --stores <list> (https://bugs.launchpad.net/glance/+bug/1889666) * * Bug 1886650: Glance client does not correctly forward global request IDs (https://code.launchpad.net/bugs/1886650) Changes in python-glanceclient 3.2.0..3.2.1 ------------------------------------------- 77eab17 Fixes "stores" property added to the image bae1d89 Pass Global Request ID on with session client b513c8d Do not use the six library. 928935e Do not use the six library in the tests. e8455f5 Stop to use the __future__ module. Diffstat (except docs and test files) ------------------------------------- glanceclient/common/http.py | 25 +++------ glanceclient/common/https.py | 21 ++----- glanceclient/common/progressbar.py | 4 +- glanceclient/common/utils.py | 23 +++----- glanceclient/exc.py | 5 +- glanceclient/shell.py | 40 +------------ glanceclient/v1/apiclient/base.py | 12 ++-- glanceclient/v1/apiclient/exceptions.py | 4 +- glanceclient/v1/apiclient/utils.py | 6 +- glanceclient/v1/images.py | 13 ++--- glanceclient/v1/shell.py | 2 - glanceclient/v2/images.py | 15 +++-- glanceclient/v2/metadefs.py | 9 ++- glanceclient/v2/shell.py | 3 + glanceclient/v2/tasks.py | 7 ++- lower-constraints.txt | 1 - .../notes/fix_1889666-22dc97ce577eccc6.yaml | 6 ++ .../notes/sess_client_grid-3c2101609110f413.yaml | 6 ++ requirements.txt | 1 - tox.ini | 2 +- 29 files changed, 208 insertions(+), 255 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 25b670a..ca8abaf 100644 --- a/requirements.txt +++ b/requirements.txt @@ -9 +8,0 @@ warlock<2,>=1.2.0 # Apache-2.0 -six>=1.10.0 # MIT

1 0

ironic-python-agent-builder 2.1.0
by no-reply＠openstack.org 12 Aug '20

12 Aug '20

We are psyched to announce the release of: ironic-python-agent-builder 2.1.0: Tools and scripts to build Ironic Python Agent The source is available from: https://opendev.org/openstack/ironic-python-agent-builder Download the package from: https://tarballs.openstack.org/ironic-python-agent-builder/ For more details, please see below. 2.1.0 ^^^^^ New Features ************ * Supports building images for Ussuri+ on CentOS 7 using Python 3. This is not recommended but is necessary for some older hardware. Bug Fixes ********* * Installs "linux-firmware" on the DIB images since it's now uninstalled by the base elements on Red Hat operating systems. Changes in ironic-python-agent-builder 2.0.0..2.1.0 --------------------------------------------------- a28b8fa Support installing with Python 3 on CentOS 7 040e5f2 Log IPv6 configuration status for tinycore 4a41550 Add dynamic-login to our published images by default a1c3a16 Strip some excess from the centos dib image a41ec9d Add Tripleo IPA build image job in zuul layout 541e858 Fixes DIB_IPA_CERT certificate copy issue 654e9c7 Set min version of tox to 3.2.1 82a1ba0 Build tinyipa on focal 2a19fa3 Disable EPEL on CentOS 8 by default ddd631a [tinyipa] Fix getting MTU via dhcp e9d0443 Run ensure-pip in the build/check jobs 02d9abd Disable automatic updates in dnf-based systems 074ff4b Fix python-dev package mapping 1ae521b Install missing ffi development library 16a734a Switch to newer openstackdocstheme and reno versions 9434851 Add releasenotes link to README 79cd8ed Install linux-firmware in DIB images 53d67f3 Update tox.ini bd780bf Change ownership of tce info dir Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 15 +++++++ README.rst | 1 + .../cleanup.d/99-ramdisk-create | 1 + .../environment.d/20-disable-epel.bash | 4 ++ .../60-ironic-python-agent-ramdisk-install | 25 ++++++++++-- .../package-installs.yaml | 6 +++ dib/ironic-python-agent-ramdisk/pkg-map | 5 ++- .../post-install.d/80-ironic-python-agent-ramdisk | 12 ++++++ .../post-install.d/99-remove-extra-packages | 1 + playbooks/ironic-python-agent-build-image/pre.yaml | 3 ++ .../notes/centos7-python3-185f1d35c37096c7.yaml | 5 +++ .../notes/linux-firmware-9a6f8a9a32c5719d.yaml | 5 +++ releasenotes/source/conf.py | 8 ++-- roles/ipa-build-dib-image/defaults/main.yaml | 1 + roles/ipa-build-dib-image/tasks/main.yaml | 3 ++ test-requirements.txt | 6 +-- tinyipa/build-instance-images.sh | 7 ++++ tinyipa/build-tinyipa.sh | 7 ++++ tinyipa/build_files/bootlocal.sh | 47 +++++++++++++--------- tinyipa/finalise-tinyipa.sh | 7 ++++ tinyipa/install-deps.sh | 8 ++-- tinyipa/patches/tce-load_squashfs.patch | 20 +++++++++ tinyipa/udhcpc.script | 1 + tox.ini | 3 +- 26 files changed, 173 insertions(+), 38 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index aa70f77..3e816e9 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -10,2 +10,2 @@ doc8>=0.6.0 # Apache-2.0 -sphinx!=1.6.6,!=1.6.7,!=2.1.0,>=1.6.2 # BSD -openstackdocstheme>=1.31.2 # Apache-2.0 +sphinx>=2.0.0,!=2.1.0 # BSD +openstackdocstheme>=2.2.1 # Apache-2.0 @@ -13 +13 @@ openstackdocstheme>=1.31.2 # Apache-2.0 -reno>=2.5.0 # Apache-2.0 +reno>=3.1.0 # Apache-2.0

1 0

ironic-python-agent 6.1.1 (ussuri)
by no-reply＠openstack.org 10 Aug '20

10 Aug '20

We are chuffed to announce the release of: ironic-python-agent 6.1.1: Ironic Python Agent Ramdisk This release is part of the ussuri stable release series. The source is available from: https://opendev.org/openstack/ironic-python-agent Download the package from: https://tarballs.openstack.org/ironic-python-agent/ Please report issues through: https://storyboard.openstack.org/#!/project/openstack/ironic- python-agent For more details, please see below. 6.1.1 ^^^^^ Bug Fixes * Fixes deployment failures when the image download is interrupted mid-stream while the contents are being downloaded. Previously retries were limited to only opening the initial connection. * Fixes the return value of the "apply_configuration" deploy step: the "agent" RAID interface expects the final RAID configuration to be returned. * Fixes the short timeout retries interval, which was previously "5" seconds, to a length that will allow the agent to retry after a network interruption. The time between retries is now "10" seconds, and the number of retries are set to "9" to help ensure intermittent network outages do not cause recoverable failures. * Fixes an issue with high cpu usage caused by ironic-python-agent greenthread eventlent implementation. Using eventlet.sleep(0.1) instead of eventlet.sleep(0) gives other processes of IPA more cpu time to run. * Speeds up going from inspection to cleaning with fast-track enabled by caching hardware information between the steps. * Fixes serializing exceptions originating from ironic-lib. Previously an attempt to do so would result in a "TypeError", for example: *Object of type 'InstanceDeployFailure' is not JSON serializable*. * Fixes an issue with the ironic-python-agent where we would call to setup the bootloader, which is necessary with software raid, but also attempt to clean up iSCSI. This can cause issues when using the "direct" "deploy_interface". Now the agent will only clean up iSCSI connections if iSCSI was explicitly started. For more information, please see story 2007937 (https://storyboard.openstack.org/#!/story/2007937) * The size of the ESP partition created for software RAID has been increased from 128 MiB to 550 MiB. This change is in line with the recent diskimage-builder change (https://opendev.org/openstack /diskimage-builder/commit/7fd52ba84180b4e749ccf4c9db8c49eafff46ea8) as well as the guidance from the author of gdisk (https://www.rodsbooks.com/efi-bootloaders/principles.html) * Fixes failure to detect a hung file download connection in the event that the kernel has not rapidly detected that the remote server has hung up the socket. This can happen when there is intermittent and transient connectivity issues such as those that can occur due to LACP failure response hold-downs timers in switching fabrics. * Devices with size 0 are now ignored when collecting inventory. Some hardware represents virtual floppy devices this way, see e.g. https://www.dell.com/community/Systems-Management-General/How-to- disable-iDRAC-Virtual-CD/td-p/4734424 Changes in ironic-python-agent 6.1.0..6.1.1 ------------------------------------------- 74f9b3a set EVENTLET_NO_GREENDNS to 'yes' 0f2836a Return the final RAID configuration from apply_configuration 458dc2c Ignore devices with size 0 when collecting inventory 4746f09 Prevent un-needed iscsi cleanup fd02912 Update jobs 8ab527e Limit Inspection->Lookup->Heartbeat lag 74e9ed1 Fix serializing ironic-lib exceptions e69f140 Increase the ESP partition size to 550 MiB when using software RAID aa500ec Fixes minor issues in the read() retries patch 802da0c Fix confusing logging when running asynchronous commands af0bf46 Extend retries to 9, 10 seconds apart. 1b15271 Add full download retries 33c96d0 Add timeout operations to try and prevent hang on read() ed3f00f Make the install_bootloader command asynchronous 0489144 Fix an issue with high cpu usage caused by ironic-python-agent 954ae39 CI: raise DIB jobs memory to 3 GiB 98a2b71 Update TOX_CONSTRAINTS_FILE for stable/ussuri b40cf0d Update .gitreview for stable/ussuri Diffstat (except docs and test files) ------------------------------------- .gitreview | 1 + ironic_python_agent/__init__.py | 19 ++++ ironic_python_agent/agent.py | 14 ++- ironic_python_agent/config.py | 4 +- ironic_python_agent/encoding.py | 12 +++ ironic_python_agent/extensions/base.py | 19 ++-- ironic_python_agent/extensions/image.py | 8 +- ironic_python_agent/extensions/iscsi.py | 3 +- ironic_python_agent/extensions/standby.py | 100 ++++++++++++++++---- ironic_python_agent/hardware.py | 35 ++++++- ironic_python_agent/inspector.py | 2 +- ironic_python_agent/raid_utils.py | 14 ++- ironic_python_agent/utils.py | 7 +- ...y-retries-image-downloads-67409a493c6d08ae.yaml | 6 ++ .../notes/apply-raid-aeca7848c6320d6b.yaml | 6 ++ .../extend-retry-timeout-30c930a33d97c193.yaml | 8 ++ ...x-high-cpu-usage-eventlet-1dccf3b81dd42c47.yaml | 8 ++ .../notes/inspect-to-clean-b3616d843775c187.yaml | 5 + releasenotes/notes/lib-exc-41ee122eb4a04bc4.yaml | 6 ++ ...nt-needless-iscsi-cleanup-f8d602c0abc7e8ba.yaml | 9 ++ .../notes/raid-esp-size-2c322adb2d3b9ce7.yaml | 9 ++ .../timeout_on_file_download-ed77918318316075.yaml | 9 ++ releasenotes/notes/zero-size-78d3be2ac8fd59c2.yaml | 6 ++ tox.ini | 2 +- zuul.d/ironic-python-agent-jobs.yaml | 12 ++- zuul.d/project.yaml | 14 ++- 34 files changed, 546 insertions(+), 95 deletions(-)

1 0

sushy-tools 0.12.0
by no-reply＠openstack.org 10 Aug '20

10 Aug '20

We high-spiritedly announce the release of: sushy-tools 0.12.0: A set of tools to support the development and test of the Sushy library (https://docs.openstack.org/sushy/) The source is available from: https://opendev.org/openstack/sushy-tools Download the package from: https://tarballs.openstack.org/sushy-tools/ For more details, please see below. Changes in sushy-tools 0.11.1..0.12.0 ------------------------------------- c5b9905 Flatten the emulator resources 05127d1 Get rid of Resources cache, store resources on the Application b3bbb5b Replace the static Manager driver with a new fake one fab49eb Log API errors for easier debugging 950fea8 Use property plus abstractmethod for abstractproperty ade6f5a Update version of hacking Diffstat (except docs and test files) ------------------------------------- lower-constraints.txt | 2 +- sushy_tools/emulator/base.py | 21 +- sushy_tools/emulator/main.py | 819 ++++++++++----------- sushy_tools/emulator/resources/base.py | 21 +- .../{chassis/staticdriver.py => chassis.py} | 7 +- sushy_tools/emulator/resources/chassis/__init__.py | 0 sushy_tools/emulator/resources/chassis/base.py | 68 -- .../{drives/staticdriver.py => drives.py} | 15 +- sushy_tools/emulator/resources/drives/__init__.py | 0 .../{indicators/staticdriver.py => indicators.py} | 26 +- .../emulator/resources/indicators/__init__.py | 0 sushy_tools/emulator/resources/managers.py | 88 +++ .../emulator/resources/managers/__init__.py | 0 sushy_tools/emulator/resources/managers/base.py | 68 -- .../emulator/resources/managers/staticdriver.py | 122 --- .../{storage/staticdriver.py => storage.py} | 15 +- sushy_tools/emulator/resources/storage/__init__.py | 0 sushy_tools/emulator/resources/systems/base.py | 16 +- .../{vmedia/staticdriver.py => vmedia.py} | 30 +- sushy_tools/emulator/resources/vmedia/__init__.py | 0 .../{volumes/staticdriver.py => volumes.py} | 24 +- sushy_tools/emulator/resources/volumes/__init__.py | 0 sushy_tools/emulator/templates/manager.json | 40 - .../unit/emulator/resources/chassis/__init__.py | 0 .../unit/emulator/resources/drives/__init__.py | 0 .../unit/emulator/resources/indicators/__init__.py | 0 .../unit/emulator/resources/managers/__init__.py | 0 .../emulator/resources/managers/test_static.py | 78 -- .../unit/emulator/resources/storage/__init__.py | 0 .../{chassis/test_static.py => test_chassis.py} | 9 +- .../{drives/test_static.py => test_drives.py} | 8 +- .../test_static.py => test_indicators.py} | 29 +- .../{storage/test_static.py => test_storage.py} | 8 +- .../{vmedia/test_static.py => test_vmedia.py} | 107 +-- .../{volumes/test_static.py => test_volumes.py} | 32 +- .../unit/emulator/resources/vmedia/__init__.py | 0 .../unit/emulator/resources/volumes/__init__.py | 0 test-requirements.txt | 2 +- 43 files changed, 867 insertions(+), 1342 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index 6c24f35..148bd19 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -5 +5 @@ -hacking>=3.0.0,<3.1.0 # Apache-2.0 +hacking>=3.1.0,<3.2.0 # Apache-2.0

1 0

neutron-lib 2.5.0 (victoria)
by no-reply＠openstack.org 07 Aug '20

07 Aug '20

We enthusiastically announce the release of: neutron-lib 2.5.0: Neutron shared routines and utilities This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/neutron-lib Download the package from: https://pypi.org/project/neutron-lib Please report issues through: https://bugs.launchpad.net/neutron/+bugs For more details, please see below. 2.5.0 ^^^^^ New Features * Add an API extension "address-groups" that enables users to aggregate IP address blocks into an address group object which can be later referenced when creating other resources. * Add an API extension "security-groups-normalized-cidr" that adds new, read-only attribute "normalized_cidr" to the security group rules. * Add keyword "is_sort_key" to agents. Make the agent's attribute can be used as a sort key for sorting list result. * Add "supported_extensions" method to "MechanismDriver". This method provides an standard API to implement, per mechanism driver, a way to filter the supported extensions. By default, this method will return the same set of extensions passed. * New API definition: "port-numa-affinity-policy". The new field added to "ports" API, "numa_affinity_policy", represents the NUMA affinity policy requested by this port during the virtual machine scheduling. Values: None, "required", "preferred", "legacy". * The API extension "uplink-status-propagation" has changed the default value of "propagate_uplink_status" from False to True. Now, when this extension is enabled, the VF link state will be set, by default, to "auto", following the PF link state. This change will affect only new ports; existing ports will keep their current value. Changes in neutron-lib 2.4.0..2.5.0 ----------------------------------- 1f06863 Change "propagate_uplink_status" default value to True a3961d7 New api-def: port-numa-affinity-policy 6ae3942 Add address group exceptions b64d4e2 Add DEVICE_OWNER_ROUTED constant 750141e API definition for SG group rules address groups. 8ae0c1f Add API definition for SG rule's normalized_cidr field b4e33e5 Add "supported_extensions" method to MechanismDriver 5b03597 Neutron agent-list API added with sort_key keyword 4f17bc1 Change policy on neutron-lib migration 60eab57 Metadata addresses 3d6e16d [FWaaS] Add note about deprecation of the neutron-fwaas project Diffstat (except docs and test files) ------------------------------------- api-ref/source/v2/agents.inc | 2 + api-ref/source/v2/fwaas-v2.inc | 9 +++ api-ref/source/v2/parameters.yaml | 33 +++++++++ api-ref/source/v2/ports.inc | 21 +++++- neutron_lib/api/definitions/__init__.py | 8 +++ neutron_lib/api/definitions/address_group.py | 83 ++++++++++++++++++++++ neutron_lib/api/definitions/agent_sort_key.py | 36 ++++++++++ .../api/definitions/port_numa_affinity_policy.py | 45 ++++++++++++ neutron_lib/api/definitions/portbindings.py | 2 + .../definitions/security_groups_normalized_cidr.py | 46 ++++++++++++ .../api/definitions/uplink_status_propagation.py | 2 +- neutron_lib/constants.py | 26 ++++++- neutron_lib/exceptions/__init__.py | 14 ++++ neutron_lib/exceptions/address_group.py | 30 ++++++++ neutron_lib/plugins/ml2/api.py | 15 ++++ .../unit/api/definitions/test_address_group.py | 20 ++++++ .../unit/api/definitions/test_agent_sort_key.py | 25 +++++++ .../definitions/test_port_numa_affinity_policy.py | 22 ++++++ .../test_security_groups_normalized_cidr.py | 22 ++++++ ...d-extension-address-group-5e306d90666982aa.yaml | 6 ++ ...ty-groups-normalized-cidr-ef7521b226090d7e.yaml | 5 ++ .../notes/bug-1877254-2b997b3911e98079.yaml | 5 ++ ...iver_supported_extensions-67e1b0b763571ae9.yaml | 7 ++ ...port-numa-affinity-policy-9e6d1bafd3c6af36.yaml | 7 ++ ...k_status_defaults_to_true-07dcdc20f20db594.yaml | 9 +++ 26 files changed, 504 insertions(+), 47 deletions(-)

1 0

puppet-neutron 17.2.0 (victoria)
by no-reply＠openstack.org 05 Aug '20

05 Aug '20

We are jazzed to announce the release of: puppet-neutron 17.2.0: Puppet module for OpenStack Neutron This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/puppet-neutron Download the package from: https://tarballs.openstack.org/puppet-neutron/ Please report issues through: https://bugs.launchpad.net/puppet-neutron/+bugs For more details, please see below. 17.2.0 ^^^^^^ New Features ************ * The new "neutron::server::notifications::http_retries" parameter has been added to set number of client retries. * The new "neutron::keystone::authtoken::interface" parameter has been added, which can be used to set the interface parameter in authtoken middleware. * The new "neutron::server::notifications::ironic" class has been added to support configuration parameters to enable notifications to ironic. * The new "server::notifications::nova" class has been added to configure parameters for notifications to nova. Upgrade Notes ************* * The following deprecated parameters has been removed * "neutron::server::notifications::project_domain_id" * "neutron::server::notifications::user_domain_id" * "neutron::server::notifications::tenant_id" * "neutron::server::notifications::tenant_name" * "neutron::designate::project_domain_id" * "neutron::designate::user_domain_id" * The neutron::server::database_min_pool_size and neutron::db::database_min_pool_size parameters is removed. * The database_connection, database_max_retries, database_idle_timeout, database_retry_interval, database_max_pool_size and database_max_overflow parameters in neutron::server is removed, use the neutron::db class instead. Deprecation Notes ***************** * The neutron::server::ensure_fwaas_package is deprecated and will be removed in a future release. * The neutron::services::fwaas class is deprecated and will be removed in a future release. * The neutron_fwaas_service_config resource is deprecated and will be removed in a future release. * The following parameters in "server::notifications" class has been deprecated and will be removed in a future release. Use the corresponding parameters in "server::notifications::nova" class. * "password" * "auth_type" * "username" * "project_name" * "user_domain_name" * "project_domain_name" * "auth_url" * "region_name" * "endpoint_type" * "notify_nova_on_port_status_changes" * "notify_nova_on_port_data_changes" Changes in puppet-neutron 17.1.0..17.2.0 ---------------------------------------- 8d7f30c8 Prepare Victoria M2 286d66b9 Add support for notifications to ironic 26ef871f Change to relative include 4638137d Create an independent class for nova notifications e3b416de Cleanup deprecated domain_id parameters 1389140f Add support for http_retries f065e99a Use relative name for class inclusion 9fc323f4 Nuage: remove check on mechanism driver 6d825ca6 Add support for the interface parameter in authtoken middleware 8993e812 Remove deprecated neutron database params 80f2b44b Deprecated neutron fwaas Diffstat (except docs and test files) ------------------------------------- examples/cisco_ml2.pp | 6 +- .../neutron_fwaas_service_config/ini_setting.rb | 1 + lib/puppet/type/neutron_fwaas_service_config.rb | 1 + manifests/agents/ml2/ovs.pp | 4 +- manifests/agents/n1kv_vem.pp | 2 +- manifests/client.pp | 2 +- manifests/db.pp | 39 ++----- manifests/designate.pp | 29 ----- manifests/keystone/authtoken.pp | 7 ++ manifests/plugins/ml2/arista.pp | 2 +- manifests/plugins/ml2/arista/l3.pp | 2 +- manifests/plugins/ml2/bagpipe.pp | 2 +- manifests/plugins/ml2/bigswitch.pp | 2 +- manifests/plugins/ml2/bigswitch/restproxy.pp | 2 +- manifests/plugins/ml2/cisco.pp | 2 +- manifests/plugins/ml2/cisco/vts.pp | 2 +- manifests/plugins/ml2/fujitsu/cfab.pp | 2 +- manifests/plugins/ml2/fujitsu/fossw.pp | 2 +- manifests/plugins/ml2/mellanox.pp | 2 +- manifests/plugins/ml2/mellanox/mlnx_sdn_assist.pp | 2 +- manifests/plugins/ml2/networking_ansible.pp | 2 +- manifests/plugins/ml2/networking_ansible_host.pp | 2 +- manifests/plugins/ml2/nuage.pp | 4 - manifests/plugins/ml2/opendaylight.pp | 2 +- manifests/plugins/ml2/ovn.pp | 2 +- manifests/plugins/ml2/vpp.pp | 2 +- manifests/plugins/ovs/opendaylight.pp | 2 +- manifests/server.pp | 48 ++------ manifests/server/notifications.pp | 124 ++++++-------------- manifests/server/notifications/ironic.pp | 90 +++++++++++++++ manifests/server/notifications/nova.pp | 125 +++++++++++++++++++++ manifests/services/fwaas.pp | 4 + metadata.json | 10 +- ...deperecated-id-parameters-8ae1adebf972b291.yaml | 11 ++ .../client-http_retries-2bef45e4c83037cf.yaml | 5 + .../notes/deprecate-fwaas-6dc31e22fdd10c8d.yaml | 11 ++ ...stone-authtoken-interface-e1fe904a198d11bb.yaml | 6 + ...emove-deprecated-database-095127d35fa70e40.yaml | 9 ++ ...rver-notifications-ironic-01a481317cf11c08.yaml | 5 + ...server-notifications-nova-4df35db13a4f85c8.yaml | 22 ++++ spec/classes/neutron_designate_spec.rb | 4 - spec/classes/neutron_keystone_authtoken_spec.rb | 3 + spec/classes/neutron_plugins_ml2_nuage_spec.rb | 18 --- .../neutron_server_notifications_ironic_spec.rb | 84 ++++++++++++++ .../neutron_server_notifications_nova_spec.rb | 87 ++++++++++++++ spec/classes/neutron_server_notifications_spec.rb | 60 ++-------- 46 files changed, 562 insertions(+), 293 deletions(-)

1 0