- Release-announce - lists.openstack.org

neutron-dynamic-routing 26.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 14 Mar '25

14 Mar '25

Hello everyone, A new release candidate for neutron-dynamic-routing for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/neutron-dynamic-routing/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/neutron-dynamic-routing/src/branch/stable/epo… Release notes for neutron-dynamic-routing can be found at: https://docs.openstack.org/releasenotes/neutron-dynamic-routing/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/neutron/+bugs and tag it *epoxy-rc-potential* to bring it to the neutron-dynamic-routing release crew's attention.

1 0

sushy-tools 2.0.0
by no-reply＠openstack.org 14 Mar '25

14 Mar '25

We are tickled pink to announce the release of: sushy-tools 2.0.0 The source is available from: https://opendev.org/openstack/sushy-tools Download the package from: https://tarballs.openstack.org/sushy-tools/ For more details, please see below. 2.0.0 ^^^^^ New Features ************ * The openstack driver for virtual media now supports Glance file upload. As an alternative to using image import via the "web- download" method, it is now possible to configure the emulator to download the image to a temp file which is then uploaded to Glance. Set the "SUSHY_EMULATOR_OS_VMEDIA_IMAGE_FILE_UPLOAD" option to "True" to enable Glance file upload. Upgrade Notes ************* * Support for Python 3.8 has been removed. Now the minimum python version supported is 3.9 . Changes in sushy-tools 1.3.0..2.0.0 ----------------------------------- 64348a6 Redefine libvirt domain on Restart 8f5b808 Openstack vmedia - refactor to pre-defined volumes ddcb838 OS vmedia: Update device on eject_image 504eaff nova driver - get_secure_boot volume boot 7dd7c13 Openstack - get/set_boot_image support volume boot 474443e Openstack - get_boot_mode support volume boot c4e8c52 OS vmedia - post rebuild ACTIVE + SHUTOFF is ok 9a5c119 Openstack - Raise SYS518 server.task_state != None de727cf Openstack vmedia - add glance file upload support ef58421 Import needed ironic-lib code bcd694e Minor docs changes for better readability and consistency b5c52e7 add pyproject.toml to support pip 23.1 7ca193c Add TLS option to external notifier 41b9683 Drop unnecessary 'x' bit from doc config file 152e7c5 Remove Python 3.8 support 84c1e8a Reject node power off requests to align with ironic supporting NCSI b75d4cd Update irrelevant-files for sushy-jobs Diffstat (except docs and test files) ------------------------------------- README.rst | 31 +- pyproject.toml | 3 + .../notes/remove-py38-ec073d8462e60e8b.yaml | 5 + ...dia-openstack-file-upload-8a6843d6d0b33772.yaml | 11 + requirements.txt | 5 +- setup.cfg | 6 +- setup.py | 2 +- sushy_tools/emulator/auth_basic.py | 201 ++++++++++++ sushy_tools/emulator/controllers/update_service.py | 2 +- sushy_tools/emulator/main.py | 8 +- .../emulator/resources/systems/fakedriver.py | 20 +- .../emulator/resources/systems/libvirtdriver.py | 3 +- .../emulator/resources/systems/novadriver.py | 307 +++++++++--------- sushy_tools/emulator/resources/vmedia.py | 148 +++++---- sushy_tools/error.py | 16 + .../emulator/resources/systems/test_libvirt.py | 3 +- .../unit/emulator/resources/systems/test_nova.py | 338 ++++++++------------ zuul.d/sushy-tools-jobs.yaml | 10 + 29 files changed, 1226 insertions(+), 695 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index b869ebc..33f200f 100644 --- a/requirements.txt +++ b/requirements.txt @@ -9 +9 @@ -pbr!=2.1.0,>=2.0.0 # Apache-2.0 +pbr>=6.0.0 # Apache-2.0 @@ -13 +13,2 @@ tenacity>=6.2.0 # Apache-2.0 -ironic-lib>=4.6.1 # Apache-2.0 +bcrypt>=3.1.3 # Apache-2.0 +WebOb>=1.7.1 # MIT

1 0

storlets 15.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for storlets for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/storlets/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/storlets/src/branch/stable/epoxy Release notes for storlets can be found at: https://docs.openstack.org/releasenotes/storlets/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/storlets/+bugs and tag it *epoxy-rc-potential* to bring it to the storlets release crew's attention.

1 0

zaqar 20.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for zaqar for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/zaqar/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/zaqar/src/branch/stable/epoxy Release notes for zaqar can be found at: https://docs.openstack.org/releasenotes/zaqar/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/zaqar/+bugs and tag it *epoxy-rc-potential* to bring it to the zaqar release crew's attention.

1 0

watcher 14.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for watcher for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/watcher/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/watcher/src/branch/stable/epoxy Release notes for watcher can be found at: https://docs.openstack.org/releasenotes/watcher/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/watcher/+bugs and tag it *epoxy-rc-potential* to bring it to the watcher release crew's attention.

1 0

kuryr-libnetwork 15.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for kuryr-libnetwork for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/kuryr-libnetwork/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/kuryr-libnetwork/src/branch/stable/epoxy Release notes for kuryr-libnetwork can be found at: https://docs.openstack.org/releasenotes/kuryr-libnetwork/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/kuryr-libnetwork/+bugs and tag it *epoxy-rc-potential* to bring it to the kuryr-libnetwork release crew's attention.

1 0

openstack-ansible 30.0.2 (dalmatian)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

We are ecstatic to announce the release of: openstack-ansible 30.0.2 This release is part of the dalmatian release series. The source is available from: https://opendev.org/openstack/openstack-ansible Download the package from: https://tarballs.openstack.org/openstack-ansible/ Please report issues through: https://bugs.launchpad.net/openstack-ansible/+bugs For more details, please see below. 30.0.2 ^^^^^^ Upgrade Notes ************* * A uWSGI for Neutron has been disabled again by default in favor of eventlet server. This also stops and disables following services needed for uWSGI mode: * "neutron-periodic-workers" * "neutron-ovn-maintenance-worker" * "neutron-rpc-server" Bug Fixes ********* * A bug #2096937 (https://bugs.launchpad.net/openstack- ansible/+bug/2096937) related to HashRing generation has been reported when using uWSGI with Neutron. In order to quickly address the bug, uWSGI mode has been disabled again by default for Neutron until a proper fix is provided for uWSGI. Changes in openstack-ansible 30.0.1..30.0.2 ------------------------------------------- d2d92f592 Update haproxy and rabbitmq SHA ae6610bec Bump SHAs for 2024.2 d492b9ffd docs: adjust rabbitmq quorum queue guidance for 2024.2 onwards 55bacc3ea Remove ansible-role-qdrouterd from zuul required-projects 311767812 Fix inventory adjustment for legacy container naming Diffstat (except docs and test files) ------------------------------------- ansible-collection-requirements.yml | 2 +- ansible-role-requirements.yml | 32 +++++++++++----------- inventory/group_vars/all/source_git.yml | 4 +-- inventory/group_vars/cinder_all/source_git.yml | 4 +-- inventory/group_vars/designate_all/source_git.yml | 4 +-- inventory/group_vars/glance_all/source_git.yml | 4 +-- inventory/group_vars/horizon_all/source_git.yml | 6 ++-- inventory/group_vars/ironic_all/source_git.yml | 4 +-- inventory/group_vars/manila_all/source_git.yml | 4 +-- inventory/group_vars/neutron_all/source_git.yml | 8 +++--- inventory/group_vars/nova_all/source_git.yml | 6 ++-- inventory/group_vars/octavia_all/source_git.yml | 6 ++-- inventory/group_vars/placement_all/source_git.yml | 4 +-- inventory/group_vars/trove_all/source_git.yml | 4 +-- osa_toolkit/generate.py | 5 ++-- .../neutron_uwsgi_re_disable-45f28da6a4e29e54.yaml | 17 ++++++++++++ zuul.d/jobs.yaml | 1 - 18 files changed, 71 insertions(+), 56 deletions(-)

1 0

zaqar-ui 18.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for zaqar-ui for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/zaqar-ui/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/zaqar-ui/src/branch/stable/epoxy Release notes for zaqar-ui can be found at: https://docs.openstack.org/releasenotes/zaqar-ui/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/zaqar-ui/+bugs and tag it *epoxy-rc-potential* to bring it to the zaqar-ui release crew's attention.

1 0

zun-ui 15.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for zun-ui for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/zun-ui/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/zun-ui/src/branch/stable/epoxy Release notes for zun-ui can be found at: https://docs.openstack.org/releasenotes/zun-ui/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/zun-ui/+bugs and tag it *epoxy-rc-potential* to bring it to the zun-ui release crew's attention.

1 0

zun 15.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for zun for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/zun/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/zun/src/branch/stable/epoxy Release notes for zun can be found at: https://docs.openstack.org/releasenotes/zun/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/zun/+bugs and tag it *epoxy-rc-potential* to bring it to the zun release crew's attention.

1 0