- Release-announce - lists.openstack.org

manila-tempest-plugin 2.7.0 (epoxy)
by no-reply＠openstack.org 21 Mar '25

21 Mar '25

We are tickled pink to announce the release of: manila-tempest-plugin 2.7.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/manila-tempest-plugin Download the package from: https://tarballs.openstack.org/manila-tempest-plugin/ Please report issues through: https://bugs.launchpad.net/manila/+bugs For more details, please see below. 2.7.0 ^^^^^ New Features ************ * Added tests to verify share access rule update operation. Update is allowed only for admin and project member. Also supported microversion is increased to 2.88. Upgrade Notes ************* * Python 3.8 support has been dropped. Last release of manila- tempest- plugin to support python 3.8 is 2.5.0. The minimum version of Python now supported is Python 3.9. * A new configuration option, nfs_version, has been added to control the NFS protocol version used for mounting NFS shares during testing. This option allows users to specify which version of NFS should be used, supporting environments where compatibility with specific versions is required. Changes in manila-tempest-plugin 2.6.0..2.7.0 --------------------------------------------- 58903bd Ensure Manila shares are created on the same backend host b616cb8 skip tests for stable branches which don't support API 2.88 5f585fb Update for using endpoint_type to create client 7ff4509 Add tests for allow to update share access rule 3e1cfd2 Refactor CIFS protocol test skipping with decorators 10945e5 IPV4 with Multinode Ceph-NFS Job bebefa7 Fix floating IP association by filtering port list using IP address 639bdc6 [RBAC] Generate unique cephx IDs for each operation in tests b5d6f29 Add nfs_versions option for NFS protocol version selection 55c075d Remove share server migration with replica test 6304dcd Bump hacking 32da8e2 Update gate jobs as per the 2025.1 cycle testing runtime f4b5557 Fix last use of assertDictContainsSubset 91a6171 Remove stable/2023.1 job from master gate e33b5e9 Support py3.12 and drop py3.8 5b3045c Add manila.conf parameters for NetApp Active IQ weigher Diffstat (except docs and test files) ------------------------------------- .../services/share/v2/json/shares_client.py | 9 + .../admin/test_share_servers_migration_negative.py | 33 ---- .../add-update-access-rules-e43b4d0fbabdb596.yaml | 6 + .../drop-python38-support-07c1fab194bad54a.yaml | 6 + .../notes/nfs-versions-6886a2dd1bab094f.yaml | 8 + .../notes/remove-py-36-37-5d61c3dcf682e0df.yaml | 5 - setup.cfg | 3 +- test-requirements.txt | 5 +- zuul.d/manila-tempest-jobs.yaml | 33 +++- zuul.d/manila-tempest-stable-jobs.yaml | 18 -- zuul.d/project.yaml | 1 - 19 files changed, 283 insertions(+), 192 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index 761bf70..1a63b32 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -1 +1 @@ -hacking>=3.0.1,<3.1.0 # Apache-2.0 +hacking>=6.1.0,<6.2.0 # Apache-2.0 @@ -8,2 +8 @@ testtools>=2.2.0 # MIT -# releasenotes -flake8-import-order +flake8-import-order>=0.18.0,<0.19.0 # LGPLv3

1 0

vitrage-tempest-plugin 6.6.0 (epoxy)
by no-reply＠openstack.org 21 Mar '25

21 Mar '25

We joyfully announce the release of: vitrage-tempest-plugin 6.6.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/vitrage-tempest-plugin Download the package from: https://tarballs.openstack.org/vitrage-tempest-plugin/ Please report issues through: https://bugs.launchpad.net/vitrage/+bugs For more details, please see below. 6.6.0 ^^^^^ Upgrade Notes * Python 3.8 support has been dropped. Last release of vitrage- tempest-plugin to support python 3.8 is 6.4.0. The minimum version of Python now supported is Python 3.9. Changes in vitrage-tempest-plugin 6.5.0..6.6.0 ---------------------------------------------- 20cfc6e Update gate jobs as per the 2025.1 cycle testing runtime cf89dff Support py3.12 and drop py3.8 Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 7 +++++-- releasenotes/notes/drop-python38-support-81f678e8740165ac.yaml | 6 ++++++ setup.cfg | 5 +++-- 3 files changed, 14 insertions(+), 4 deletions(-)

1 0

keystone-tempest-plugin 0.18.0 (epoxy)
by no-reply＠openstack.org 21 Mar '25

21 Mar '25

We are delighted to announce the release of: keystone-tempest-plugin 0.18.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/keystone-tempest-plugin Download the package from: https://tarballs.openstack.org/keystone-tempest-plugin/ Please report issues through: https://bugs.launchpad.net/keystone/+bugs For more details, please see below. Changes in keystone-tempest-plugin 2023.1-last..0.18.0 ------------------------------------------------------ ead8ceb Bump hacking 8b0557f Remove stable/2023.1 job from master gate 768754b Add stable/2024.2 job 648aabf Extend tests for new Domain Manager Persona Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 14 +- requirements.txt | 6 +- test-requirements.txt | 6 +- 34 files changed, 2457 insertions(+), 241 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 67f303d..24faa8c 100644 --- a/requirements.txt +++ b/requirements.txt @@ -1,3 +1,3 @@ -# The order of packages is significant, because pip processes them in the order -# of appearance. Changing the order has an impact on the overall integration -# process, which may cause wedges in the gate later. +# Requirements lower bounds listed here are our best effort to keep them up to +# date but we do not test them so no guarantee of having them all correct. If +# you find any incorrect lower bounds, let us know or propose a fix. diff --git a/test-requirements.txt b/test-requirements.txt index 9c7d865..3d2e1c5 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -1,5 +1 @@ -# The order of packages is significant, because pip processes them in the order -# of appearance. Changing the order has an impact on the overall integration -# process, which may cause wedges in the gate later. - -hacking>=3.0,<3.1.0;python_version>='3.5' # Apache-2.0 +hacking>=6.1.0,<6.2.0 # Apache-2.0

1 0

telemetry-tempest-plugin 2.5.0 (epoxy)
by no-reply＠openstack.org 21 Mar '25

21 Mar '25

We high-spiritedly announce the release of: telemetry-tempest-plugin 2.5.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/telemetry-tempest-plugin Download the package from: https://tarballs.openstack.org/telemetry-tempest-plugin/ Please report issues through: https://bugs.launchpad.net/ceilometer/+bugs For more details, please see below. Changes in telemetry-tempest-plugin 2023.1-last..2.5.0 ------------------------------------------------------ 064072d Drop unnecessary variable overrides a3e0f9c Switch to openstack-k8s-operators/sg-core 7380d25 Update gate jobs as per the 2025.1 cycle testing runtime bc2736e Fix sg-core test 94a8115 Remove unused environment variables Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 27 ++++++++++------------ telemetry_tempest_plugin/config.py | 2 +- .../scenario/test_telemetry_integration.py | 3 --- 3 files changed, 13 insertions(+), 19 deletions(-)

1 0

glance-tempest-plugin 0.12.0 (epoxy)
by no-reply＠openstack.org 21 Mar '25

21 Mar '25

We are jazzed to announce the release of: glance-tempest-plugin 0.12.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/glance-tempest-plugin Download the package from: https://tarballs.openstack.org/glance-tempest-plugin/ Please report issues through: https://bugs.launchpad.net/glance/+bugs For more details, please see below. Changes in glance-tempest-plugin 0.11.0..0.12.0 ----------------------------------------------- a1b8146 Bump hacking e8c03ed Remove stable/2023.1 job from master gate c6bf89f Support py3.12 and drop py3.8 4bad9ec Avoid lies about image format affba5c Update README.md for running glance tests in tempest Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 7 --- README.rst | 62 +++++++++++++++++++++- .../drop-python38-support-9e4ecbf08f56c80a.yaml | 6 +++ setup.cfg | 7 +-- test-requirements.txt | 2 +- 6 files changed, 80 insertions(+), 15 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index 5cd4546..45f8e9d 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -5 +5 @@ -hacking>=3.0.1,<3.1 # Apache-2.0 +hacking>=6.1.0,<6.2.0 # Apache-2.0

1 0

venus-tempest-plugin 3.4.0 (epoxy)
by no-reply＠openstack.org 21 Mar '25

21 Mar '25

We jubilantly announce the release of: venus-tempest-plugin 3.4.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/venus-tempest-plugin Download the package from: https://tarballs.openstack.org/venus-tempest-plugin/ Please report issues through: https://bugs.launchpad.net/openstack-venus/+bugs For more details, please see below. 3.4.0 ^^^^^ Upgrade Notes * Python 3.8 support has been dropped. Last release of venus- temepst- plugin to support python 3.8 is 3.3.0. The minimum version of Python now supported is Python 3.9. Changes in venus-tempest-plugin 3.3.0..3.4.0 -------------------------------------------- b0dae6e Support py3.12 and drop py3.8 Diffstat (except docs and test files) ------------------------------------- releasenotes/notes/drop-python38-support-f95c4ad6ba695aea.yaml | 6 ++++++ setup.cfg | 6 ++++-- 2 files changed, 10 insertions(+), 2 deletions(-)

1 0

barbican-tempest-plugin 4.3.0 (epoxy)
by no-reply＠openstack.org 21 Mar '25

21 Mar '25

We are amped to announce the release of: barbican-tempest-plugin 4.3.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/barbican-tempest-plugin Download the package from: https://tarballs.openstack.org/barbican-tempest-plugin/ Please report issues through: https://bugs.launchpad.net/barbican/+bugs For more details, please see below. 4.3.0 ^^^^^ Upgrade Notes * Python 3.8 support has been dropped. Last release of barbican- tempest-plugin to support python 3.8 is 4.1.0. The minimum version of Python now supported is Python 3.9. Changes in barbican-tempest-plugin 4.2.0..4.3.0 ----------------------------------------------- c6da000 Update gate jobs as per the 2025.1 cycle testing runtime c01cab3 Remove stable/2023.1 job from master gate f29e5ff Support py3.12 and drop py3.8 Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 28 ++++++++-------------- .../drop-python38-support-6c2833c61d2fa750.yaml | 6 +++++ setup.cfg | 4 ++-- test-requirements.txt | 2 +- 4 files changed, 19 insertions(+), 21 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index bf16924..3d77201 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -5 +5 @@ -hacking>=3.2.0,<3.3.0 # Apache-2.0 +hacking>=7.0.0,<7.1.0 # Apache-2.0

1 0

cinder-tempest-plugin 1.17.0 (epoxy)
by no-reply＠openstack.org 21 Mar '25

21 Mar '25

We are glad to announce the release of: cinder-tempest-plugin 1.17.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/cinder-tempest-plugin Download the package from: https://tarballs.openstack.org/cinder-tempest-plugin/ Please report issues through: https://bugs.launchpad.net/cinder/+bugs For more details, please see below. 1.17.0 ^^^^^^ Deprecation Notes * Dependency test config setting 'volume_image_dep_tests' in cinder- tempest-plugin is deprecated.Alternatively tempest *CONF.volume_feature_enabled.enable_volume_image_dep_tests* can be used to for dependency tests. Changes in cinder-tempest-plugin 1.16.0..1.17.0 ----------------------------------------------- 9df6c9d Add 'encryption_id' parameter to enc type calls a07fd50 zuul: explicitly enable c-bak in the lvm-lio job 060369f Test user visible extra spec 2be6e10 Ensure server and backed volume are created in the same AZ 4ae1dc8 Deprecate `volume_image_dep_tests` dfde7d5 Remove stable/2023.1 job from master gate Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 16 +-- cinder_tempest_plugin/api/volume/base.py | 4 + .../api/volume/test_volume_dependency.py | 15 ++- cinder_tempest_plugin/config.py | 8 +- cinder_tempest_plugin/rbac/v3/test_volume_types.py | 127 +++++++++++++++++---- cinder_tempest_plugin/scenario/test_snapshots.py | 5 +- requirements.txt | 2 +- 8 files changed, 137 insertions(+), 46 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index c25d1c5..aa631de 100644 --- a/requirements.txt +++ b/requirements.txt @@ -8 +8 @@ oslo.serialization!=2.19.1,>=2.18.0 # Apache-2.0 -tempest>=34.2.0 # Apache-2.0 +tempest>=40.0.0 # Apache-2.0

1 0

octavia 16.0.0.0rc2 (epoxy)
by no-reply＠openstack.org 21 Mar '25

21 Mar '25

Hello everyone, A new release candidate for octavia for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/octavia/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/octavia/src/branch/stable/epoxy Release notes for octavia can be found at: https://docs.openstack.org/releasenotes/octavia/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/908 and tag it *epoxy-rc-potential* to bring it to the octavia release crew's attention.

1 0

freezer-api 16.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 20 Mar '25

20 Mar '25

Hello everyone, A new release candidate for freezer-api for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/freezer-api/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/freezer-api/src/branch/stable/epoxy Release notes for freezer-api can be found at: https://docs.openstack.org/releasenotes/freezer-api/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/freezer and tag it *epoxy-rc-potential* to bring it to the freezer-api release crew's attention.

1 0

ironic 29.0.0 (epoxy)
by no-reply＠openstack.org 20 Mar '25

20 Mar '25

We are ecstatic to announce the release of: ironic 29.0.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/ironic Download the package from: https://tarballs.openstack.org/ironic/ Please report issues through: https://bugs.launchpad.net/ironic/+bugs For more details, please see below. 29.0.0 ^^^^^^ New Features ************ * Adds a "bootc" deploy interface which can be enabled by an Ironic deployment administrator, which can then enable users of the "bootc" deploy interface to have a streamlined path for the deployment of bootc supporting container images to a host directly, without additional intermediate steps. More information about bootc can be found on the bootc website (https://containers.github.io/bootc/) * Adds support for OCI Container Registries for the retrieval of deployment artifacts and whole-disk images to be written to a remote host. * If *ignore_project_check_for_admin_tasks* is set to *True*, the system will check if the requester is an admin for verifying image availability, bypassing the project check for administrative tasks. * Adds the capability for Ironic's conductor to detect Zstandard compressed content and to automatically decompress the files to enable image format detection and conversion. This is due to use of Zstandard compression upon artifacts stored in container registries is a popular practice, and can be disabled using the "[conductor]disable_zstandard_decompression" configuration option. * A new entry point "ironic.console.container" is added to determine how console containers are orchestrated when "ironic.conf" "[vnc]enabled=True". By default the "fake" provider is specified by "[vnc]container_provider" which performs no orchestration. The only functional implementation included is "systemd" which manages containers as Systemd Quadlet containers. These containers run as user services and rootless podman containers. Having "podman" installed is also a dependency for this provider. See "ironic.conf" "[vnc]" options to see how this provider can be configured. The "systemd" provider is opinionated and will not be appropriate for some Ironic deployment methods, especially those which run Ironic inside containers. External implementations of "ironic.console.container" are encouraged to integrate with other deployment / management methods. * New "console" drivers "redfish-graphical" and "fake-graphical" have been added. This allows the graphical console to be accessed for Dell iDRAC, HPE iLO, and Supermicro hosts. The "fake-graphical" driver is useful for demonstrating the full integration of "ironic- novncproxy" and the "systemd" provider of "ironic.console.container". * A new service "ironic-novncproxy" has been added which allows the graphical console of a host to be presented in a NoVNC web browser interface. Hosts required a supported "console" driver to access its graphical console. * Add support for a node in service failed state can be unprovisioned via the "delete" provision action. * When "ironic.conf" "[vnc]read_only=True" is set, keyboard and mouse events will not be passed to the console. Upgrade Notes ************* * If graphical console support is required, the "ironic-novncproxy" service needs to be started and managed. Graphical console specific options need to be set in the "[vnc]" section of "ironic.conf". * Remove unused and (pre-Rocky release) deprecated *token* parameter from the DHCP driver interface method. Deprecation Notes ***************** * Use of the console driver "ipmitool-shellinabox" has been deprecated and will be removed in a future release of Ironic. This decision was reached with the reality that the fork of shellinabox appears abandoned with no changes in 7 years and open issues to call for the project to hand over maintainership (https://github.com/shellinabox/shellinabox/issues/531) Bug Fixes ********* * When changing from glanceclient to OpenStack SDK to communicate with Glance, a bug was introduced reading image properties causing the Anaconda deploy interface to be unable to use Glance images. Other deploy interfaces continued to function but could have resulted in some properties not taking affect. See bug 2099275 (https://bugs.launchpad.net/ironic/+bug/2099953) for more details. * Fixes the identification of physical network segment mapping so a virtual interface (VIF) which has already been mapped to a physical network segment can be identified. * Fix the issue that restart of conductor service can not recover a node stuck at the "servicing" state. * Some vendors insist that floppy images must be 1440 KiB in size and that the file name ends with ".img". Make it so. * Includes the agent token parameter in get command status requests as the endpoint now requires authentication. * Log non-recoverable secure boot status check failures at INFO level. Changes in ironic 28.0.0..29.0.0 -------------------------------- 6e099bdfe Allow a node in service fail state to be unprovisioned 4a6dece8e Update release mappings for epoxy f23930bc9 API/Testing: Inspection rules migration 910ee2e38 Clean-up: Inspection Rules Testing da99e1154 doc: Update the runbook API usage 0962a07e0 Remove IPA build on cleanup e91685f33 Add servicing to stuck states on recovery 1dbb501cd Add ignore_project_check_for_admin_tasks config option b25a3cad6 [CI] Use bigger partition as work dir for metal3 job 3925c90a6 [CI] Fix libvirt logs collection in metal3 job de5988af2 Follow-up: Apply Inspection Rules fef0cfec7 [CI] metal3 integration: reduce total time between node check 57d7b10cb vncproxy: Use dedicated options for SSL 05734cfc9 fix glance metadata layout 6af973aee Install and run sushy-tools within a virtualenv 25a3dd076 Documentation for graphical consoles 53d93d6d7 Restore recompile of dnsmasq 45700551d CI: Make metal3 non-voting 3ac02101c CI: Change standalone jobs over to OVN b49d509d9 doc: updates to anaconda deploy interface 1ad1b167f Implement graphical console read-only support 4ed44172b Add vnc-container image build e41cb93ee Implement drivers redfish-graphical, fake-graphical 48557942a Add systemd provider for console containers 48940fcd6 Replace deprecated FormatChecker.cls_checks e6de3578f Fix fake classmethods d1bdee946 Replace deprecated abc.abstractclassmethod 1412cc336 Enable trunk plugin for tinyipa-multinode 5230316e7 Drop direct dependency on iso8601 56dbf38ed Make floppy images more floppy e7d1f8e21 Add extra log to is_image_available 7d3d75db7 CI: Extend default timeouts slightly 1afc11be8 ci: focus ironic-tempest-bios-ipmi-direct-tinyipa f333fd4d1 More reliable TinyIPA build with network retries 45d87a851 Remove multinancy page beaaf405d Add ironic-novncproxy service e994d405b Remove gmr from the docs 0b57f5609 centos devstack support: fix VM permissions 449bc1a82 deprecate shellinabox fecdaed26 Mention removing codespell job in bugfix branches 4d5e2de19 Trivial: Enable disabling tftp setup 0aadeeea7 Fix devstack plugin for centos 489652835 allow multiple inspection interfaces to load hooks feb320594 Filter physnets when ports are pre-allocated to a segment 690bc3190 trivial: lock dnsmasq check to ubuntu f5083f7a4 trivial: de-distro dnsmasq version check 782045852 OVN UEFI IPv6 CI job c0681ccf6 Utility functions for graphical console drivers 279392966 Pass agent token to get command results 15df33437 Apply Rules: inspection rules migration d6a692e3f DB: inspection rules migration 437ce1467 OCI: Send the auth header to IPA 6aaa84f11 oci: fix auth config loading 526253641 oci: fix hang with 429 error code handling 59804114f move hooks execution into shareable module e0a9a2157 [docs] Fix link to metal3-integration page c7fa447ab bootc deploy interface - for bootable containers ec53c6b5d CI: Only artificially pin down the mtu in multinode 520d01a0a Add basic documentation on metal3-integration job d6b339ba3 Automatic zstd detection and decompression... db4412d57 OCI container adjacent artifact support 69b3ff405 Remove ibmc leftovers 62a44faf6 Log secure boot access failures at INFO level 68f379582 Create a reference section fa7a8bf9c Fixes upstream table width on cleaning docs 9f43eddb3 Checkout dnsmasq in a tmp directory b7e2b1242 Fix invalid command in grenade destroy 778f8f09f Trivial: Remove the long deprecated `token` arg d163f1619 [devstack ]Use tap interfaces for VMs 083ade489 Mask all driver_internal_info in node output 602a8ba38 Update hardware burn-in docs Diffstat (except docs and test files) ------------------------------------- bindep.txt | 7 + devstack/files/bindep.txt | 2 + devstack/lib/ironic | 291 +++++-- devstack/plugin.sh | 2 +- devstack/settings | 10 +- devstack/tools/ironic/scripts/configure-vm.py | 3 + devstack/tools/ironic/scripts/create-node.sh | 14 +- devstack/tools/ironic/templates/vm.xml | 6 +- devstack/upgrade/resources.sh | 2 +- .../install/include/configure-ironic-conductor.inc | 50 ++ .../include/configure-ironic-novncproxy.inc | 45 ++ .../include/configure-ironic-singleprocess.inc | 10 +- .../refarch/small-cloud-trusted-tenants.rst | 15 + ironic/api/controllers/v1/__init__.py | 5 +- ironic/api/controllers/v1/inspection_rule.py | 295 +++++++ ironic/api/controllers/v1/node.py | 5 +- ironic/api/controllers/v1/notification_utils.py | 4 + ironic/api/controllers/v1/utils.py | 8 + ironic/api/controllers/v1/versions.py | 4 +- ironic/api/validation/validators.py | 46 +- ironic/cmd/novncproxy.py | 56 ++ ironic/cmd/singleprocess.py | 6 + ironic/common/checksum_utils.py | 146 ++++ ironic/common/console_factory.py | 67 ++ ironic/common/exception.py | 73 ++ ironic/common/glance_service/image_service.py | 14 + ironic/common/glance_service/service_utils.py | 48 +- ironic/common/image_service.py | 544 +++++++++++++ ironic/common/images.py | 94 ++- .../ibmc => common/inspection_rules}/__init__.py | 0 ironic/common/inspection_rules/actions.py | 409 ++++++++++ ironic/common/inspection_rules/base.py | 157 ++++ ironic/common/inspection_rules/engine.py | 210 +++++ ironic/common/inspection_rules/operators.py | 236 ++++++ ironic/common/inspection_rules/utils.py | 177 ++++ ironic/common/inspection_rules/validation.py | 186 +++++ ironic/common/neutron.py | 56 +- ironic/common/oci_registry.py | 791 ++++++++++++++++++ ironic/common/policy.py | 47 +- ironic/common/pxe_utils.py | 10 +- ironic/common/release_mappings.py | 76 +- ironic/common/states.py | 6 +- ironic/common/vnc.py | 113 +++ ironic/conductor/inspection.py | 5 +- ironic/conductor/rpc_service.py | 15 + ironic/conductor/utils.py | 2 + ironic/conf/__init__.py | 4 + ironic/conf/conductor.py | 9 + ironic/conf/default.py | 6 + ironic/conf/inspector.py | 22 +- ironic/conf/oci.py | 63 ++ ironic/conf/opts.py | 2 + ironic/conf/vnc.py | 147 ++++ ironic/console/__init__.py | 0 ironic/console/container/__init__.py | 0 ironic/console/container/base.py | 55 ++ ironic/console/container/fake.py | 31 + .../container/ironic-console.container.template | 12 + ironic/console/container/systemd.py | 325 ++++++++ ironic/console/novncproxy_service.py | 74 ++ ironic/console/rfb/__init__.py | 0 ironic/console/rfb/auth.py | 65 ++ ironic/console/rfb/authnone.py | 24 + ironic/console/rfb/auths.py | 51 ++ ironic/console/securityproxy/__init__.py | 0 ironic/console/securityproxy/base.py | 44 + ironic/console/securityproxy/rfb.py | 214 +++++ ironic/console/websocketproxy.py | 249 ++++++ ironic/db/api.py | 65 +- .../versions/21c48150dea9_add_inspection_rules.py | 54 ++ ironic/db/sqlalchemy/api.py | 73 ++ ironic/db/sqlalchemy/models.py | 20 + ironic/dhcp/base.py | 9 +- ironic/dhcp/dnsmasq.py | 3 +- ironic/dhcp/neutron.py | 8 +- ironic/dhcp/none.py | 3 +- ironic/drivers/fake_hardware.py | 4 +- ironic/drivers/generic.py | 2 +- ironic/drivers/modules/agent.py | 172 +++- ironic/drivers/modules/agent_client.py | 6 + ironic/drivers/modules/deploy_utils.py | 272 +++++-- ironic/drivers/modules/fake.py | 29 + ironic/drivers/modules/graphical_console.py | 94 +++ ironic/drivers/modules/image_cache.py | 40 +- ironic/drivers/modules/image_utils.py | 8 +- ironic/drivers/modules/inspect_utils.py | 120 ++- ironic/drivers/modules/inspector/agent.py | 90 +-- ironic/drivers/modules/ipmitool.py | 8 + .../drivers/modules/redfish/graphical_console.py | 73 ++ ironic/drivers/modules/redfish/management.py | 11 +- ironic/drivers/redfish.py | 6 + ironic/drivers/utils.py | 21 + ironic/objects/__init__.py | 1 + ironic/objects/inspection_rule.py | 211 +++++ .../api/controllers/v1/test_inspection_rule.py | 267 ++++++ .../console/container/test_console_container.py | 325 ++++++++ .../console/securityproxy/test_websocketproxy.py | 507 ++++++++++++ .../unit/drivers/modules/inspector/test_agent.py | 69 +- .../unit/drivers/modules/test_agent_client.py | 6 +- .../unit/drivers/modules/test_deploy_utils.py | 188 ++++- .../unit/drivers/modules/test_graphical_console.py | 83 ++ .../unit/drivers/modules/test_inspect_utils.py | 65 ++ playbooks/metal3-ci/post.yaml | 1 + playbooks/metal3-ci/run.yaml | 22 +- ...dd-bootc-deploy-interface-2658614c5190c457.yaml | 10 + ...ontainer-registry-support-9ed3ddc345410433.yaml | 5 + ...ect_check_for_admin_tasks-54007fb30017296f.yaml | 4 + ...omatic-zstd-decompression-bf30cb99ebbb07f3.yaml | 11 + ...ce-image-properties-check-2a11337c9e517a5c.yaml | 10 + ...console_container_systemd-9aba9a603e3fa94c.yaml | 17 + .../deprecate-shell-in-a-box-eef2ec4a96683e19.yaml | 8 + ...ix-physnet-identification-6f4e32fa3850de8b.yaml | 6 + .../fix-stuck-on-servicing-9a86f32d9687461a.yaml | 5 + .../floppy-image-quirks-32e14d32a37b0742.yaml | 5 + .../notes/graphical-consoles-a9e2f0def57f7a47.yaml | 8 + ...ent-token-to-get-requests-982bacce85d95ce8.yaml | 5 + .../notes/novncproxy-cf70aae44e8a6bd9.yaml | 12 + ...y-exceptions-to-INFO-logs-24479c994d93de21.yaml | 4 + ...eprecated-token-parameter-a38cd202b8a34b30.yaml | 5 + ...service-failed-unprovison-b63c2ecde624131b.yaml | 5 + .../notes/vnc_read_only-e0f18c5d0d356515.yaml | 5 + requirements.txt | 2 + setup.cfg | 9 + test-requirements.txt | 1 - tools/vnc-container/Containerfile | 25 + tools/vnc-container/README.rst | 74 ++ tools/vnc-container/bin/start-browser-x11vnc.sh | 11 + tools/vnc-container/bin/start-selenium-browser.py | 337 ++++++++ tools/vnc-container/bin/start-xvfb.sh | 5 + tools/vnc-container/drivers/fake/index.html | 80 ++ .../drivers/fake/ironic_mascot_color.png | Bin 0 -> 91447 bytes zuul.d/ironic-jobs.yaml | 78 +- zuul.d/project.yaml | 2 + 187 files changed, 13390 insertions(+), 724 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 2f3705f9b..ecfb0cbe4 100644 --- a/requirements.txt +++ b/requirements.txt @@ -49,0 +50,2 @@ bcrypt>=3.1.3 # Apache-2.0 +websockify>=0.9.0 # LGPLv3 +PyYAML>=6.0.2 # MIT diff --git a/test-requirements.txt b/test-requirements.txt index 52e337a59..f20c660e6 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -5 +4,0 @@ PyMySQL>=0.8.0 # MIT License -iso8601>=0.1.11 # MIT

1 0

horizon 25.3.0 (epoxy)
by no-reply＠openstack.org 19 Mar '25

19 Mar '25

We are excited to announce the release of: horizon 25.3.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/horizon Download the package from: https://tarballs.openstack.org/horizon/ Please report issues through: https://bugs.launchpad.net/horizon/+bugs For more details, please see below. Changes in horizon 25.2.0..25.3.0 --------------------------------- edad0dbfc Improve two factor authentication config in Horizon 7c94e4af4 Improve key-pair description 49fb3fe50 Server Groups - add description for Policy a63a4ee5e Remove leftover Neutron test_data variables a11c3d316 Don't modify Resource fields in place 72eeb6aab Modify help information on update Metadata form 0d5d324f6 Settings Reference - few small fix in documentation 27756071c Fix integration tests image unsupported media type issue 63780f4b7 Size(GiB) - fix for forgotten space 308680680 SDK for Neutron Floating IPs f0ddd6460 Define measurement units for RAM and disk. 8bced1b1b doc: Create and manage volumes - fix for Size (GB) should be GiB 75195cbae SDK for Neutron IP availabilty and Agents Diffstat (except docs and test files) ------------------------------------- openstack_dashboard/api/keystone.py | 38 +++++ openstack_dashboard/api/neutron.py | 84 +++++---- .../dashboards/admin/backups/tables.py | 2 +- .../dashboards/admin/flavors/tables.py | 6 +- .../dashboards/admin/info/tables.py | 6 +- .../dashboards/admin/networks/agents/tables.py | 6 +- .../dashboards/admin/rbac_policies/forms.py | 8 +- .../dashboards/admin/rbac_policies/tabs.py | 2 +- .../templates/rbac_policies/_create.html | 2 +- .../dashboards/admin/rbac_policies/views.py | 2 +- .../templates/volume_types/extras/_create.html | 4 + .../dashboards/admin/volumes/tables.py | 2 +- .../dashboards/identity/credentials/__init__.py | 0 .../dashboards/identity/credentials/forms.py | 115 +++++++++++++ .../dashboards/identity/credentials/panel.py | 34 ++++ .../dashboards/identity/credentials/tables.py | 103 +++++++++++ .../credentials/templates/credentials/_create.html | 13 ++ .../credentials/templates/credentials/_update.html | 13 ++ .../credentials/templates/credentials/create.html | 7 + .../credentials/templates/credentials/update.html | 7 + .../dashboards/identity/credentials/urls.py | 23 +++ .../dashboards/identity/credentials/views.py | 107 ++++++++++++ .../identity/users/credentials/__init__.py | 0 .../identity/users/credentials/tables.py | 26 +++ .../dashboards/identity/users/tabs.py | 33 +++- .../dashboards/project/backups/tables.py | 2 +- .../dashboards/settings/credentials/__init__.py | 0 .../dashboards/settings/credentials/forms.py | 33 ++++ .../dashboards/settings/credentials/panel.py | 25 +++ .../dashboards/settings/credentials/tables.py | 42 +++++ .../credentials/templates/credentials/_create.html | 13 ++ .../credentials/templates/credentials/_update.html | 13 ++ .../credentials/templates/credentials/create.html | 7 + .../credentials/templates/credentials/update.html | 7 + .../dashboards/settings/credentials/urls.py | 23 +++ .../dashboards/settings/credentials/views.py | 47 ++++++ .../dashboards/settings/dashboard.py | 2 +- .../enabled/_3100_identity_credentials_panel.py | 10 ++ .../static/app/core/images/images.module.js | 4 +- .../update-metadata/update-metadata.help.html | 2 +- .../server_groups/actions/create.action.service.js | 3 + .../server_groups/actions/create.description.html | 10 ++ .../test/selenium/integration/test_images.py | 6 +- .../test/test_data/keystone_data.py | 20 +++ openstack_dashboard/test/test_data/neutron_data.py | 126 ++++++-------- openstack_dashboard/test/unit/api/test_network.py | 11 +- openstack_dashboard/test/unit/api/test_neutron.py | 188 ++++++++++++--------- 52 files changed, 1086 insertions(+), 245 deletions(-)

1 0

ironic-python-agent 10.2.0 (epoxy)
by no-reply＠openstack.org 18 Mar '25

18 Mar '25

We are pleased to announce the release of: ironic-python-agent 10.2.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/ironic-python-agent Download the package from: https://tarballs.openstack.org/ironic-python-agent/ Please report issues through: https://bugs.launchpad.net/ironic-python-agent/+bugs For more details, please see below. 10.2.0 ^^^^^^ New Features ************ * Adds support to Ironic-Python-Agent to facilitate deployment of bootable containers. This is an experimental feature for standalone users. Operators wishing to disable this feature, can leverage the "[DEFAULT]disable_bootc_deploy" option in "ironic-python- agent.conf". Bug Fixes ********* * Fixes a potential security issue where a third party may be able to retrieve potentially sensitive data in command result output from the agent. If a request comes in with an "agent_token" to the command results endpoint, the agent will now require all future calls to leverage the token to retrieve results and validate that token's validity. This effectively eliminates the possibility of a malicious entity with access to the agent's API endpoint from capturing the command results from agent operations. * Prevents IPA from restarting on tenant networks during rescue operations by adding proper lockdown. Changes in ironic-python-agent 10.1.0..10.2.0 --------------------------------------------- 91f52035 Doc: Fix incorrect function in example code 14009b99 Missing __init__.py file fd8032b3 Fix the way qemu-img is called with prlimits 6c22ab2d Remove pre-victoria cycle agent token transition upgrade support a6ca6520 Lockout agent command results if a token is received 39687159 Revert "Add token validation to GET command endpoints" a42980a0 Ensure IPA is locked down in rescue mode 6f860995 Add token validation to GET command endpoints c4998fc5 oci: permit an 'unknown' but valid image a132e167 oci: Enable embedded authentication passing ced6f3a0 Trivial:Remove codespell job (moved to pre-commit) c8763bba follow-up: update release note for bootable container work fe55bee4 Revert "Configure ipa bugfix 10.1" 1508cc4c Bootable container support 412c8f3f Configure ipa bugfix 10.1 Diffstat (except docs and test files) ------------------------------------- bindep.txt | 1 + ironic_python_agent/agent.py | 33 +- ironic_python_agent/api/app.py | 18 +- ironic_python_agent/config.py | 5 + ironic_python_agent/disk_utils.py | 4 +- ironic_python_agent/extensions/rescue.py | 6 + ironic_python_agent/extensions/standby.py | 273 ++++++++++++- ironic_python_agent/hardware.py | 47 +++ ironic_python_agent/metrics_lib/__init__.py | 0 ironic_python_agent/qemu_img.py | 2 +- .../add-support-for-bootc-70b8a4546b176ab4.yaml | 8 + .../lockout-command-result-a368187515385270.yaml | 11 + ...vent-restart-after-rescue-2cdd9cb03c0efb1b.yaml | 5 + zuul.d/ironic-python-agent-jobs.yaml | 7 - zuul.d/project.yaml | 2 - 24 files changed, 992 insertions(+), 36 deletions(-)

1 0

networking-generic-switch 7.5.0 (epoxy)
by no-reply＠openstack.org 18 Mar '25

18 Mar '25

We are glad to announce the release of: networking-generic-switch 7.5.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/networking-generic-switch Download the package from: https://pypi.org/project/networking-generic-switch Please report issues through: https://bugs.launchpad.net/networking-generic-switch/+bugs For more details, please see below. 7.5.0 ^^^^^ New Features ************ * Adds a new device driver, "netmiko_supermicro_smis", for managing Supermicro based switch devices. * Add support of VLAN aware instances for the following drivers * OVS (as reference implementation) * AristaEos * CiscoIos * DellOS 10 * Cumulus NVUE Upgrade Notes ************* * Support for Python 3.8 has been removed. Now the minimum python version supported is 3.9 . Bug Fixes ********* * Fixes a security vulnerability where sensitive information (IP addresses, usernames, hostname and file paths) were leaked in error messages when a connection to a network device fails. Error messages are now properly sanitized to redact these sensitive details while preserving meaningful information for troubleshooting. Changes in networking-generic-switch 7.4.0..7.5.0 ------------------------------------------------- 1c8306d docs: add status for force10 os 0d3cec2 Fix info leakage in Netmiko connection errors 1b53447 Adds vlan aware VMs support for Cumulus NVUE and DellOS10 ff0085a Add vlan aware VMs support 2734a59 Configuration error handling for non-Layer-2 ports 81b32ed Allow config of simulated switch 8b474ce don't use paramiko's get_fingerprint (md5) d8261fd Add support for Neutron routed segments fc5e92d Fix binding l2-only ports by setting connectivity property d1f2ea8 Fix typo in section name 9d146d0 Remove unneeded hasattr check for bond methods 9aaf333 Fix ngs_allowed_vlans validation b508d0e CI: Fix recent codespell error 4d80ed5 reno: Update master for unmaintained/2023.1 ced747b Add note about requirements lower bounds d798da0 Drop alpha status 406465f Remove Python 3.8 support 4069685 add pyproject.toml to support pip 23.1 ddbbd4c tox: Drop envdir 40116e5 Correct device_type in Cumulus NVUE comment 5621922 cumulus_nvue: Don't call enable() and set enter_config_mode = False fa70d08 Force autospec=True in tests and fix unit tests e25edb3 Link to Ironic dev-quickstart in contributing doc 518742a Add Supermicro switches to allow for supported write config 0aed9fd Update master for stable/2024.2 Diffstat (except docs and test files) ------------------------------------- CONTRIBUTING.rst | 12 + devstack/plugin.sh | 90 +-- networking_generic_switch/devices/__init__.py | 81 ++- .../devices/netmiko_devices/__init__.py | 204 +++++-- .../devices/netmiko_devices/arista.py | 23 + .../devices/netmiko_devices/cisco.py | 25 + .../devices/netmiko_devices/cumulus.py | 59 +- .../devices/netmiko_devices/dell.py | 12 + .../devices/netmiko_devices/juniper.py | 31 +- .../devices/netmiko_devices/nokia.py | 8 +- .../devices/netmiko_devices/ovs.py | 40 ++ .../devices/netmiko_devices/smc.py | 67 +++ networking_generic_switch/devices/utils.py | 3 +- networking_generic_switch/exceptions.py | 11 +- networking_generic_switch/generic_switch_mech.py | 250 ++++++--- networking_generic_switch/trunk_driver.py | 109 ++++ networking_generic_switch/utils.py | 27 + pyproject.toml | 3 + .../add-supermicro-support-8cc6c6b2265e474b.yaml | 5 + .../fix-netmiko-info-leakage-423c4c59b924c06f.yaml | 8 + .../notes/remove-py38-18af38f2ee386abc.yaml | 5 + .../notes/vlan-aware-vms-3923cc17254829e9.yaml | 9 + releasenotes/source/2023.1.rst | 2 +- releasenotes/source/2024.2.rst | 6 + releasenotes/source/index.rst | 1 + requirements.txt | 6 +- setup.cfg | 6 +- setup.py | 2 +- tox.ini | 5 +- 56 files changed, 2694 insertions(+), 701 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 32fca5f..3d8dc11 100644 --- a/requirements.txt +++ b/requirements.txt @@ -1,3 +1,3 @@ -# The order of packages is significant, because pip processes them in the order -# of appearance. Changing the order has an impact on the overall integration -# process, which may cause wedges in the gate later. +# Requirements lower bounds listed here are our best effort to keep them up to +# date but we do not test them so no guarantee of having them all correct. If +# you find any incorrect lower bounds, let us know or propose a fix.

1 0

nova 31.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 18 Mar '25

18 Mar '25

Hello everyone, A new release candidate for nova for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/nova/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/nova/src/branch/stable/epoxy Release notes for nova can be found at: https://docs.openstack.org/releasenotes/nova/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/nova/+bugs and tag it *epoxy-rc-potential* to bring it to the nova release crew's attention.

1 0

ironic-inspector 12.4.0 (epoxy)
by no-reply＠openstack.org 18 Mar '25

18 Mar '25

We are ecstatic to announce the release of: ironic-inspector 12.4.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/ironic-inspector Download the package from: https://tarballs.openstack.org/ironic-inspector/ Please report issues through: https://bugs.launchpad.net/ironic-inspector/+bugs For more details, please see below. Changes in ironic-inspector 12.3.0..12.4.0 ------------------------------------------ 07d0c28 Release note: Inspector is dying/dead c0caf3c Replace deprecated configure_auth_token_middleware 1754bc9 Remove default override for oslo.policy config options 570f007 Migrate from ironic-lib ecf5495 reno: Update master for unmaintained/2023.1 eb614d5 Remove Python 3.8 support c173e38 tox: Drop envdir eaf53a2 Remove workaround for eventlet < 0.27.0 6e473d3 Imported Translations from Zanata def9e26 Update master for stable/2024.2 1e7f3e7 Fix a wrong assertion method Diffstat (except docs and test files) ------------------------------------- devstack/plugin.sh | 17 +- ironic_inspector/cmd/__init__.py | 20 +- ironic_inspector/common/auth_basic.py | 204 +++++++++++++ ironic_inspector/common/device_hints.py | 322 +++++++++++++++++++++ ironic_inspector/common/exception.py | 155 ++++++++++ ironic_inspector/common/mdns.py | 290 +++++++++++++++++++ ironic_inspector/conductor/manager.py | 2 +- ironic_inspector/conf/__init__.py | 4 + ironic_inspector/conf/exception.py | 43 +++ ironic_inspector/conf/mdns.py | 44 +++ ironic_inspector/conf/opts.py | 2 + .../locale/en_GB/LC_MESSAGES/ironic_inspector.po | 6 +- ironic_inspector/plugins/standard.py | 9 +- ironic_inspector/policy.py | 9 - ironic_inspector/test/unit/test_basic_auth.py | 223 ++++++++++++++ ironic_inspector/test/unit/test_device_hints.py | 320 ++++++++++++++++++++ ironic_inspector/test/unit/test_manager.py | 11 +- ironic_inspector/test/unit/test_mdns.py | 143 +++++++++ ironic_inspector/utils.py | 99 ++++++- ironic_inspector/wsgi_service.py | 6 +- .../inspector-is-going-away-296119ff4b5454f0.yaml | 6 + .../notes/remove-py38-547c59b20ab9424d.yaml | 5 + releasenotes/source/2023.1.rst | 2 +- releasenotes/source/2024.2.rst | 6 + releasenotes/source/index.rst | 1 + .../locale/en_GB/LC_MESSAGES/releasenotes.po | 21 +- requirements.txt | 7 +- setup.cfg | 6 +- tools/config-generator.conf | 1 - tox.ini | 2 - 30 files changed, 1922 insertions(+), 64 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 0eca907..a2612c7 100644 --- a/requirements.txt +++ b/requirements.txt @@ -8 +8 @@ construct>=2.9.39 # MIT -eventlet>=0.26.0 # MIT +eventlet>=0.27.0 # MIT @@ -11 +10,0 @@ futurist>=1.2.0 # Apache-2.0 -ironic-lib>=4.3.0 # Apache-2.0 @@ -28 +27 @@ oslo.middleware>=3.31.0 # Apache-2.0 -oslo.policy>=3.7.0 # Apache-2.0 +oslo.policy>=4.5.0 # Apache-2.0 @@ -38,0 +38,2 @@ microversion_parse>=1.0.1 # Apache-2.0 +zeroconf>=0.24.0 # LGPL +bcrypt>=3.1.3 # Apache-2.0

1 0

placement 13.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 18 Mar '25

18 Mar '25

Hello everyone, A new release candidate for placement for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/placement/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/placement/src/branch/stable/epoxy Release notes for placement can be found at: https://docs.openstack.org/releasenotes/placement/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/placement and tag it *epoxy-rc-potential* to bring it to the placement release crew's attention.

1 0

designate 20.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 18 Mar '25

18 Mar '25

Hello everyone, A new release candidate for designate for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/designate/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/designate/src/branch/stable/epoxy Release notes for designate can be found at: https://docs.openstack.org/releasenotes/designate/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/designate/+bugs and tag it *epoxy-rc-potential* to bring it to the designate release crew's attention.

1 0

magnum-ui 16.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for magnum-ui for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/magnum-ui/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/magnum-ui/src/branch/stable/epoxy Release notes for magnum-ui can be found at: https://docs.openstack.org/releasenotes/magnum-ui/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/magnum-ui/+bugs and tag it *epoxy-rc-potential* to bring it to the magnum-ui release crew's attention.

1 0

venus-dashboard 6.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for venus-dashboard for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/venus-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/venus-dashboard/src/branch/stable/epoxy Release notes for venus-dashboard can be found at: https://docs.openstack.org/releasenotes/venus-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/openstack-venus/+bugs and tag it *epoxy-rc-potential* to bring it to the venus-dashboard release crew's attention.

1 0

octavia 16.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for octavia for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/octavia/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/octavia/src/branch/stable/epoxy Release notes for octavia can be found at: https://docs.openstack.org/releasenotes/octavia/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/908 and tag it *epoxy-rc-potential* to bring it to the octavia release crew's attention.

1 0

venus 6.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for venus for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/venus/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/venus/src/branch/stable/epoxy Release notes for venus can be found at: https://docs.openstack.org/releasenotes/venus/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/openstack-venus/+bugs and tag it *epoxy-rc-potential* to bring it to the venus release crew's attention.

1 0

cloudkitty 22.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for cloudkitty for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/cloudkitty/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/cloudkitty/src/branch/stable/epoxy Release notes for cloudkitty can be found at: https://docs.openstack.org/releasenotes/cloudkitty/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/cloudkitty and tag it *epoxy-rc-potential* to bring it to the cloudkitty release crew's attention.

1 0

freezer-web-ui 16.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for freezer-web-ui for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/freezer-web-ui/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/freezer-web-ui/src/branch/stable/epoxy Release notes for freezer-web-ui can be found at: https://docs.openstack.org/releasenotes/freezer-web-ui/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/freezer-web-ui and tag it *epoxy-rc-potential* to bring it to the freezer-web-ui release crew's attention.

1 0

mistral 20.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for mistral for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/mistral/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/mistral/src/branch/stable/epoxy Release notes for mistral can be found at: https://docs.openstack.org/releasenotes/mistral/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/mistral/+bugs and tag it *epoxy-rc-potential* to bring it to the mistral release crew's attention.

1 0

mistral-dashboard 20.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for mistral-dashboard for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/mistral-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/mistral-dashboard/src/branch/stable/epoxy Release notes for mistral-dashboard can be found at: https://docs.openstack.org/releasenotes/mistral-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/mistral/+bugs and tag it *epoxy-rc-potential* to bring it to the mistral-dashboard release crew's attention.

1 0

ceilometer 24.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for ceilometer for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/ceilometer/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/ceilometer/src/branch/stable/epoxy Release notes for ceilometer can be found at: https://docs.openstack.org/releasenotes/ceilometer/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/ceilometer/+bugs and tag it *epoxy-rc-potential* to bring it to the ceilometer release crew's attention.

1 0

magnum 20.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for magnum for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/magnum/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/magnum/src/branch/stable/epoxy Release notes for magnum can be found at: https://docs.openstack.org/releasenotes/magnum/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/magnum/+bugs and tag it *epoxy-rc-potential* to bring it to the magnum release crew's attention.

1 0

vitrage 14.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for vitrage for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/vitrage/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/vitrage/src/branch/stable/epoxy Release notes for vitrage can be found at: https://docs.openstack.org/releasenotes/vitrage/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/vitrage and tag it *epoxy-rc-potential* to bring it to the vitrage release crew's attention.

1 0

designate-dashboard 20.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for designate-dashboard for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/designate-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/designate-dashboard/src/branch/stable/epoxy Release notes for designate-dashboard can be found at: https://docs.openstack.org/releasenotes/designate-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/designate-dashboard/+bugs and tag it *epoxy-rc-potential* to bring it to the designate-dashboard release crew's attention.

1 0

cloudkitty-dashboard 20.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for cloudkitty-dashboard for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/cloudkitty-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/cloudkitty-dashboard/src/branch/stable/epoxy Release notes for cloudkitty-dashboard can be found at: https://docs.openstack.org/releasenotes/cloudkitty-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/cloudkitty-dashboard and tag it *epoxy-rc-potential* to bring it to the cloudkitty-dashboard release crew's attention.

1 0

aodh 20.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for aodh for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/aodh/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/aodh/src/branch/stable/epoxy Release notes for aodh can be found at: https://docs.openstack.org/releasenotes/aodh/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/aodh/+bugs and tag it *epoxy-rc-potential* to bring it to the aodh release crew's attention.

1 0

vitrage-dashboard 8.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for vitrage-dashboard for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/vitrage-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/vitrage-dashboard/src/branch/stable/epoxy Release notes for vitrage-dashboard can be found at: https://docs.openstack.org/releasenotes/vitrage-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/vitrage-dashboard and tag it *epoxy-rc-potential* to bring it to the vitrage-dashboard release crew's attention.

1 0

heat-agents 10.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for heat-agents for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/heat-agents/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/heat-agents/src/branch/stable/epoxy Release notes for heat-agents can be found at: https://docs.openstack.org/releasenotes/heat-agents/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/heat-agents/+bugs and tag it *epoxy-rc-potential* to bring it to the heat-agents release crew's attention.

1 0

masakari 19.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for masakari for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/masakari/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/masakari/src/branch/stable/epoxy Release notes for masakari can be found at: https://docs.openstack.org/releasenotes/masakari/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/masakari/+bugs and tag it *epoxy-rc-potential* to bring it to the masakari release crew's attention.

1 0

trove-dashboard 24.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for trove-dashboard for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/trove-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/trove-dashboard/src/branch/stable/epoxy Release notes for trove-dashboard can be found at: https://docs.openstack.org/releasenotes/trove-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/trove-dashboard/+bugs and tag it *epoxy-rc-potential* to bring it to the trove-dashboard release crew's attention.

1 0

octavia-dashboard 15.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for octavia-dashboard for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/octavia-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/octavia-dashboard/src/branch/stable/epoxy Release notes for octavia-dashboard can be found at: https://docs.openstack.org/releasenotes/octavia-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/octavia-dashboard and tag it *epoxy-rc-potential* to bring it to the octavia-dashboard release crew's attention.

1 0

trove 23.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for trove for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/trove/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/trove/src/branch/stable/epoxy Release notes for trove can be found at: https://docs.openstack.org/releasenotes/trove/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/trove/+bugs and tag it *epoxy-rc-potential* to bring it to the trove release crew's attention.

1 0

neutron-fwaas 22.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for neutron-fwaas for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/neutron-fwaas/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/neutron-fwaas/src/branch/stable/epoxy Release notes for neutron-fwaas can be found at: https://docs.openstack.org/releasenotes/neutron-fwaas/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/neutron/+bugs and tag it *epoxy-rc-potential* to bring it to the neutron-fwaas release crew's attention.

1 0

freezer 16.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for freezer for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/freezer/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/freezer/src/branch/stable/epoxy Release notes for freezer can be found at: https://docs.openstack.org/releasenotes/freezer/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/freezer and tag it *epoxy-rc-potential* to bring it to the freezer release crew's attention.

1 0

tacker 13.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for tacker for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/tacker/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/tacker/src/branch/stable/epoxy Release notes for tacker can be found at: https://docs.openstack.org/releasenotes/tacker/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/tacker/+bugs and tag it *epoxy-rc-potential* to bring it to the tacker release crew's attention.

1 0

masakari-monitors 19.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for masakari-monitors for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/masakari-monitors/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/masakari-monitors/src/branch/stable/epoxy Release notes for masakari-monitors can be found at: https://docs.openstack.org/releasenotes/masakari-monitors/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/masakari-monitors/+bugs and tag it *epoxy-rc-potential* to bring it to the masakari-monitors release crew's attention.

1 0

masakari-dashboard 12.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for masakari-dashboard for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/masakari-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/masakari-dashboard/src/branch/stable/epoxy Release notes for masakari-dashboard can be found at: https://docs.openstack.org/releasenotes/masakari-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/masakari/+bugs and tag it *epoxy-rc-potential* to bring it to the masakari-dashboard release crew's attention.

1 0

neutron-vpnaas 26.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for neutron-vpnaas for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/neutron-vpnaas/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/neutron-vpnaas/src/branch/stable/epoxy Release notes for neutron-vpnaas can be found at: https://docs.openstack.org/releasenotes/neutron-vpnaas/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/neutron/+bugs and tag it *epoxy-rc-potential* to bring it to the neutron-vpnaas release crew's attention.

1 0

watcher-dashboard 13.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for watcher-dashboard for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/watcher-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/watcher-dashboard/src/branch/stable/epoxy Release notes for watcher-dashboard can be found at: https://docs.openstack.org/releasenotes/watcher-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/watcher-dashboard/+bugs and tag it *epoxy-rc-potential* to bring it to the watcher-dashboard release crew's attention.

1 0

glance 30.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for glance for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/glance/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/glance/src/branch/stable/epoxy Release notes for glance can be found at: https://docs.openstack.org/releasenotes/glance/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/glance/+bugs and tag it *epoxy-rc-potential* to bring it to the glance release crew's attention.

1 0

ovn-bgp-agent 4.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for ovn-bgp-agent for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/ovn-bgp-agent/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/ovn-bgp-agent/src/branch/stable/epoxy Release notes for ovn-bgp-agent can be found at: https://docs.openstack.org/releasenotes/ovn-bgp-agent/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/ovn-bgp-agent/+bugs and tag it *epoxy-rc-potential* to bring it to the ovn-bgp-agent release crew's attention.

1 0

adjutant 10.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for adjutant for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/adjutant/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/adjutant/src/branch/stable/epoxy Release notes for adjutant can be found at: https://docs.openstack.org/releasenotes/adjutant/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/adjutant and tag it *epoxy-rc-potential* to bring it to the adjutant release crew's attention.

1 0

neutron 26.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for neutron for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/neutron/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/neutron/src/branch/stable/epoxy Release notes for neutron can be found at: https://docs.openstack.org/releasenotes/neutron/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/neutron/+bugs and tag it *epoxy-rc-potential* to bring it to the neutron release crew's attention.

1 0

cinder 26.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 17 Mar '25

17 Mar '25

Hello everyone, A new release candidate for cinder for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/cinder/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/cinder/src/branch/stable/epoxy Release notes for cinder can be found at: https://docs.openstack.org/releasenotes/cinder/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/cinder/+bugs and tag it *epoxy-rc-potential* to bring it to the cinder release crew's attention.

1 0