- Release-announce - lists.openstack.org

ironic-python-agent 6.2.0 (victoria)
by no-reply＠openstack.org 08 Jul '20

08 Jul '20

We are excited to announce the release of: ironic-python-agent 6.2.0: Ironic Python Agent Ramdisk This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/ironic-python-agent Download the package from: https://tarballs.openstack.org/ironic-python-agent/ Please report issues through: https://storyboard.openstack.org/#!/project/openstack/ironic- python-agent For more details, please see below. 6.2.0 ^^^^^ Bug Fixes * Fixes deployment failures when the image download is interrupted mid-stream while the contents are being downloaded. Previously retries were limited to only opening the initial connection. * Fixes the short timeout retries interval, which was previously "5" seconds, to a length that will allow the agent to retry after a network interruption. The time between retries is now "10" seconds, and the number of retries are set to "9" to help ensure intermittent network outages do not cause recoverable failures. * Fixes an issue with high cpu usage caused by ironic-python-agent greenthread eventlent implementation. Using eventlet.sleep(0.1) instead of eventlet.sleep(0) gives other processes of IPA more cpu time to run. * Speeds up going from inspection to cleaning with fast-track enabled by caching hardware information between the steps. * Fixes serializing exceptions originating from ironic-lib. Previously an attempt to do so would result in a "TypeError", for example: *Object of type 'InstanceDeployFailure' is not JSON serializable*. * The size of the ESP partition created for software RAID has been increased from 128 MiB to 550 MiB. This change is in line with the recent diskimage-builder change (https://opendev.org/openstack /diskimage-builder/commit/7fd52ba84180b4e749ccf4c9db8c49eafff46ea8) as well as the guidance from the author of gdisk (https://www.rodsbooks.com/efi-bootloaders/principles.html) * Fixes failure to detect a hung file download connection in the event that the kernel has not rapidly detected that the remote server has hung up the socket. This can happen when there is intermittent and transient connectivity issues such as those that can occur due to LACP failure response hold-downs timers in switching fabrics. Changes in ironic-python-agent 6.1.0..6.2.0 ------------------------------------------- 9d9a6bc Refactor part of image module c76b8b2 Limit Inspection->Lookup->Heartbeat lag a08029a Switch the inspector job to tinyIPA until DIB is fixed ba3caa6 Increase the ESP partition size to 550 MiB when using software RAID a4855c5 Fix serializing ironic-lib exceptions c1c093f Bump hacking min version to 3.0.1 c502279 Mount all vfat partitions before calling grub2 00ad03b Fixes minor issues in the read() retries patch 4e0981e Temporary switch to tinyipa jobs 0eee26e Fix confusing logging when running asynchronous commands 5cc44d2 Add debug message to node lookup 7abda4e Minor clean-up follow-up to timeout on read() fix c77a7df Extend retries to 9, 10 seconds apart. 159ab9f Add full download retries c5b97eb Add timeout operations to try and prevent hang on read() 29eab32 Remove .travis.yml (wow, it is ancient) 6d7ec35 Make get_partition_uuids work with whole disk images cf870ae Fix apidoc build 3dd929e Document how to output journal to console 648ac49 drop mock from lower-constraints 7e5fe11 Make the install_bootloader command asynchronous 4da53ab Add ffi development lib to bindep 9d4cf55 Add a deploy step for writing an image 6c1545b New extension call to return partition UUIDs 9524890 Fix an issue with high cpu usage caused by ironic-python-agent 557d560 Split and move logic for partition tables f108b7a Switch to newer openstackdocstheme and reno versions 437a8c6 Convert jobs to dib 06267a9 Update lower-constraints.txt 67dd91d CI: raise DIB jobs memory to 3 GiB f6ee877 Fix pep8 errors e00fe3b Add py38 package metadata 318828c Add Python3 victoria unit tests 0edc9c1 Update master for stable/ussuri 8d21063 Fix TypeError with newer version of lshw 2738e57 Add function to calculate memory Diffstat (except docs and test files) ------------------------------------- .travis.yml | 19 - bindep.txt | 2 + ironic_python_agent/agent.py | 21 +- ironic_python_agent/config.py | 4 +- ironic_python_agent/encoding.py | 12 + ironic_python_agent/extensions/base.py | 42 +- ironic_python_agent/extensions/image.py | 94 ++-- ironic_python_agent/extensions/standby.py | 168 ++++-- ironic_python_agent/hardware.py | 107 ++-- ironic_python_agent/inspector.py | 2 +- ironic_python_agent/ironic_api_client.py | 3 + ironic_python_agent/raid_utils.py | 39 +- ironic_python_agent/utils.py | 27 +- lower-constraints.txt | 37 +- ...y-retries-image-downloads-67409a493c6d08ae.yaml | 6 + .../extend-retry-timeout-30c930a33d97c193.yaml | 8 + ...x-high-cpu-usage-eventlet-1dccf3b81dd42c47.yaml | 8 + .../notes/inspect-to-clean-b3616d843775c187.yaml | 5 + releasenotes/notes/lib-exc-41ee122eb4a04bc4.yaml | 6 + .../notes/raid-esp-size-2c322adb2d3b9ce7.yaml | 9 + .../timeout_on_file_download-ed77918318316075.yaml | 9 + releasenotes/source/conf.py | 8 +- releasenotes/source/index.rst | 1 + releasenotes/source/ussuri.rst | 6 + setup.cfg | 1 + test-requirements.txt | 7 +- tox.ini | 4 + zuul.d/ironic-python-agent-jobs.yaml | 72 ++- zuul.d/project.yaml | 6 +- 43 files changed, 1407 insertions(+), 893 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index c48ea59..0565105 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -4 +4 @@ -hacking>=3.0.0,<3.1.0 # Apache-2.0 +hacking>=3.0.1,<3.1.0 # Apache-2.0 @@ -13 +13 @@ bandit!=1.6.0,>=1.1.0,<2.0.0 # Apache-2.0 -# Doc requirements +# Doc test requirements @@ -15,3 +14,0 @@ doc8>=0.6.0 # Apache-2.0 -sphinx!=1.6.6,!=1.6.7,>=1.6.2 # BSD -openstackdocstheme>=1.20.0 # Apache-2.0 -reno>=2.5.0 # Apache-2.0

1 0

python-openstackclient 5.3.0 (victoria)
by no-reply＠openstack.org 08 Jul '20

08 Jul '20

We are ecstatic to announce the release of: python-openstackclient 5.3.0: OpenStack Command-line Client This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/python-openstackclient Download the package from: https://pypi.org/project/python-openstackclient Please report issues through: https://storyboard.openstack.org/#!/project/openstack/python- openstackclient For more details, please see below. 5.3.0 ^^^^^ New Features ************ * Add a new option *--description* to "floating ip port forwarding create" and "floating ip port forwarding set" commands. * Added "--import" flag to "openstack image create" to allow the user to force use of the image import codepath. * Added the below mentioned parameters to the user create and set commands. * --ignore-lockout-failure-attempts * --no-ignore-lockout-failure-attempts * --ignore-password-expiry * --no-ignore-password-expiry * --ignore-change-password-upon-first-use * --no-ignore-change-password-upon-first-use * --enable-lock-password * --disable-lock-password * --enable-multi-factor-auth * --disable-multi-factor-auth * --multi-factor-auth-rule This will now allow users to set user options via CLI. <https://docs.openstack.org/keystone/latest/admin/resource- options.html#user-options> * Added the below mentioned parameters to the role, project and domain commands. * --immutable * --no-immutable This will allow user to set "immutable" resource option. * Add "--force" options to the "openstack quota set" command. The compute service allows us to to force set a quota, setting a quota value that is less than the amount of the resource currently consumed. Expose this feature by way of a "--force" boolean parameter. * Add "address_scope" as a valid "--type" value for the "network rbac create" and "network rbac list" commands. * Add "subnetpool" as a valid "--type" value for the "network rbac create" and "network rbac list" commands. * Add new commands "router add route" and "router remove route" to support new Neutron extension: "extraroute-atomic" (see Neutron RFE (https://bugs.launchpad.net/neutron/+bug/1826396)) * Add "--stateful" and "--stateless" option to the "security group create" and "security group set" commands to support stateful and stateless security groups. Deprecation Notes ***************** * The use of "router set --route" to add extra routes next to already existing extra routes is deprecated in favor of "router add route --route", because "router set --route" if used from multiple clients concurrently may lead to lost updates. Bug Fixes ********* * [Story 2005246 (https://storyboard.openstack.org/#!/story/2005246) The *is_domain* property safely handles type checking. * While uploading a signed image, a private key to sign that image must be specified. The CLI client asks for the password of that private key. Due to wrong encoding handling while using Python 3, the password is not accepted, whether it is correct or not. * Makes "volume backup record" commands available in Volume API v3. Task 40279 Changes in python-openstackclient 5.2.0..5.3.0 ---------------------------------------------- c06d8256 Fix uploading an signed image does not work if private signing key is encrypted 5c4eb0bf Add a command to trigger entrypoint cache creation 870cf011 switch to stevedore for entry points b1fc587a Make volume backup record commands available in v3 4638dbc7 Remove enabling of glance v1 API c04ec16c Expose flag for forcing use of import for images ff2a70c4 Remove translation sections from setup.cfg 307d23bb port: add --host to list command 8b7a2c8d Don't display Munch objects in the output a0417296 Revert "Format location columns in network commands" da3c3bde image: autogenerate docs 26878e7d identity: autogenerate docs 7696593d Remove os-client-config references 2cb41935 Add cliff to libs-from-git for devstack functional tips aa7b84fd Add OpenStack Client for Manila docs b5389dab Remove congress a15b1add Replace assertItemsEqual with assertCountEqual 533af9f1 Client should parse string to boolean for value 'is_domain' 7049fd85 Add py38 package metadata 709dfd9c Switch to newer openstackdocstheme and reno versions 41a2e829 Make container list --all work f6ee42cd Cleanup: remove a useless reference to "object" 52ff421e Resolve PEP8 ae673171 Correct image lookup during server rebuild cc135e3b Add Python3 victoria unit tests 66202464 Update master for stable/ussuri da4e1ca9 Remove Babel from requirements b328cf74 Add '--force; parameter to 'openstack quota set' 557e65d8 Add 'subnetpool' type support to rbac commands 7f66273d Add resource option immutable bdaebeb5 Revert "Disallow setting default on internal network" 725e004d Use unittest.mock instead of third party mock 74a7c1d9 Add description field to portforwarding NAT rules 5e62411e Support for stateless security groups f01a0f33 Cleanup Python 2.7 support dba57c85 Add command: router add/remove route --route 05da145e Adding options to user cli 8efb3198 Be explicit about python version in image 97d027ca Add libc6-dev to bindep f03cb68a Add 'address_scope' type support to network rbac commands 3e83e747 Allow os quota list query to filter by project Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 17 +- Dockerfile | 7 +- babel.cfg | 1 - bindep.txt | 1 + .../command-objects/application-credentials.rst | 107 +- .../cli/command-objects/ec2-credentials-v2.rst | 6 + .../cli/command-objects/ec2-credentials-v3.rst | 6 + .../command-objects/federation-domain-project.rst | 11 + .../cli/command-objects/federation-protocol.rst | 14 +- .../cli/command-objects/identity-provider.rst | 14 +- .../cli/command-objects/registered-limit.rst | 133 +- .../cli/command-objects/service-provider.rst | 14 +- lower-constraints.txt | 17 +- openstackclient/api/object_store_v1.py | 14 +- openstackclient/common/clientmanager.py | 23 +- openstackclient/common/quota.py | 21 +- openstackclient/compute/v2/server.py | 9 +- openstackclient/identity/common.py | 24 + openstackclient/identity/v3/domain.py | 9 + openstackclient/identity/v3/project.py | 17 + openstackclient/identity/v3/role.py | 10 +- openstackclient/identity/v3/user.py | 120 +- openstackclient/image/v2/image.py | 17 + openstackclient/network/sdk_utils.py | 5 + openstackclient/network/v2/address_scope.py | 10 +- openstackclient/network/v2/floating_ip.py | 2 - .../network/v2/floating_ip_port_forwarding.py | 20 + openstackclient/network/v2/ip_availability.py | 2 - openstackclient/network/v2/network.py | 8 +- openstackclient/network/v2/network_agent.py | 1 - .../network/v2/network_auto_allocated_topology.py | 17 +- openstackclient/network/v2/network_flavor.py | 10 +- .../network/v2/network_flavor_profile.py | 10 +- openstackclient/network/v2/network_meter.py | 10 +- openstackclient/network/v2/network_meter_rule.py | 10 +- openstackclient/network/v2/network_qos_policy.py | 10 +- openstackclient/network/v2/network_qos_rule.py | 10 +- .../network/v2/network_qos_rule_type.py | 8 +- openstackclient/network/v2/network_rbac.py | 32 +- openstackclient/network/v2/network_segment.py | 10 +- .../network/v2/network_segment_range.py | 9 +- openstackclient/network/v2/port.py | 7 +- openstackclient/network/v2/router.py | 98 +- openstackclient/network/v2/security_group.py | 37 +- openstackclient/network/v2/security_group_rule.py | 10 +- openstackclient/network/v2/subnet.py | 1 - openstackclient/network/v2/subnet_pool.py | 1 - .../functional/network/v2/test_security_group.py | 4 +- .../network/v2/test_floating_ip_port_forwarding.py | 15 +- .../unit/network/v2/test_security_group_network.py | 10 + ...-field-in-port-forwarding-c536e077b243d517.yaml | 6 + .../add-image-import-flag-899869dc5a92aea7.yaml | 5 + ...ns_to_user_create_and_set-302401520f36d153.yaml | 19 + ...resource_option_immutable-efed6e1ebdc69591.yaml | 9 + .../notes/bug-2005246-3fb70206bafc5444.yaml | 5 + ...fault-on-internal-network-824fdea1a900891c.yaml | 9 - .../notes/fix-story-2007890-0974f3e69f26801e.yaml | 7 + ...orce-flag-openstackclient-c172de2717e5cfac.yaml | 6 + .../rbac-add-address-scope-7f6409ab70d36306.yaml | 4 + .../rbac-add-subnetpool-f1fc0e728ff61654.yaml | 4 + .../router-extraroute-atomic-d6d406ffb15695f2.yaml | 12 + .../stateful-security-group-a21fa8498e866b90.yaml | 6 + .../notes/task-40279-eb0d718ac1959c50.yaml | 5 + releasenotes/source/conf.py | 12 +- releasenotes/source/index.rst | 1 + releasenotes/source/ussuri.rst | 6 + requirements.txt | 4 +- setup.cfg | 42 +- setup.py | 9 - test-requirements.txt | 4 +- tox.ini | 2 - 143 files changed, 3038 insertions(+), 3586 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index b17b6a55..2b7976e5 100644 --- a/requirements.txt +++ b/requirements.txt @@ -7 +6,0 @@ six>=1.10.0 # MIT -Babel!=2.4.0,>=2.3.4 # BSD @@ -9 +8 @@ cliff!=2.9.0,>=2.8.0 # Apache-2.0 -openstacksdk>=0.36.0 # Apache-2.0 +openstacksdk>=0.48.0 # Apache-2.0 @@ -15,0 +15 @@ python-cinderclient>=3.3.0 # Apache-2.0 +stevedore>=2.0.1 # Apache-2.0 diff --git a/test-requirements.txt b/test-requirements.txt index 55ae1ea4..3dce687b 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -8 +7,0 @@ flake8-import-order>=0.13 # LGPLv3 -mock>=2.0.0 # BSD @@ -12,2 +10,0 @@ requests-mock>=1.2.0 # Apache-2.0 -stevedore>=1.20.0 # Apache-2.0 -os-client-config>=1.28.0 # Apache-2.0 @@ -19,0 +17 @@ wrapt>=1.7.0 # BSD License +ddt>=1.0.1 # MIT

1 0

ironic-inspector 10.2.0 (victoria)
by no-reply＠openstack.org 08 Jul '20

08 Jul '20

We eagerly announce the release of: ironic-inspector 10.2.0: Hardware introspection for OpenStack Bare Metal This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/ironic-inspector Download the package from: https://tarballs.openstack.org/ironic-inspector/ Please report issues through: https://storyboard.openstack.org/#!/project/944 For more details, please see below. 10.2.0 ^^^^^^ New Features ************ * Adds the ability for periodic clean-up and synchronization tasks with "ironic" to be able to be disabled by setting the "[DEFAULT]clean_up_period" to a value of "0". This is intended for "stand-alone" operators only as it may result in unexpected behaviors if used in a non-standalone environment. * Adds a new configuration option "[discovery]enroll_node_fields" that specifies additional fields to set on a node (e.g. driver interfaces). * Enable Basic HTTP authentication middleware. When the config option "[DEFAULT]auth_strategy" is set to "http_basic" then non-public API calls require a valid HTTP Basic authentication header to be set. The config option "[DEFAULT]http_basic_auth_user_file" defaults to "/etc/ironic- inspector/htpasswd" and points to a file that supports the Apache htpasswd syntax[1]. This file is read for every request, so no service restart is required when changes are made. The only password digest supported is bcrypt, and the "bcrypt" python library is used for password checks since it supports "$2y$" prefixed bcrypt passwords as generated by the Apache htpasswd utility. To try basic authentication, the following can be done: * Set "/etc/ironic-inspector/inspector.conf" "[DEFAULT]auth_strategy" to "http_basic" * Populate the htpasswd file with entries, for example: "htpasswd -nbB myName myPassword >> /etc/ironic-inspector/htpasswd" * Make basic authenticated HTTP requests, for example: "curl --user myName:myPassword http://localhost:6385/v1/introspection" [1] https://httpd.apache.org/docs/current/misc/password_encryptions.html * Adds periodic leader election for the cleanup sync with Ironic. The election interval is configured by the new "leader_election_interval" config option. * Adds a configuration option "[processing]update_pxe_enabled" to control whether the pxe_enabled should be updated according to introspection data for ports. The default value is True which is backwards compatible. Upgrade Notes ************* * Remove upper constraint for python construct library and use the latest version available. The minimum compatible version for python construct is now 2.9.39 * The raw data from the "extra_hardware" processing hook is no longer stored in Swift in an object named "extra_hardware-<node UUID>". The same information is already available as part of the unprocessed introspection data without a hard dependency on Swift. Deprecation Notes ***************** * The deprecated "[swift]max_retries" parameter has been removed. Bug Fixes ********* * Fixes an issue where IPv6 link local addresses are ignored during interface validation, making introspection fail. * Fixes "AttributeError: 'Node' object has no attribute 'uuid'" when trying to introspect an active node that is not currently in the cache. * No longer aborts the whole process if one periodic task fails. * Fixes accessing API endpoints with trailing slashes. Now they're treated the same way as without slashes, although the latter remain canonical URLs. * No longer uses introspection delay for nodes with "manage_boot==False" (i.e. boot is managed by ironic). It is useless and may actually break introspection if a node boots before it gets whitelisted in the PXE filter. * The introspection start API is now synchronous when "manage_boot==False". This means that any failures will be propagated to ironic, preventing it from powering a node on and booting it without the PXE filter updated. Changes in ironic-inspector 10.1.0..10.2.0 ------------------------------------------ b1e79e0 Add release version to release notes 06390e3 Use node.id instead of node.uuid in record_node 79878d7 Prepare release notes for release 10.2 0d20064 Add leader election for periodic sync with ironic 2f828ae Allow operators to disable clean_up sync f78229f Allow setting other fields on discovery 2532be9 Document [ironic] auth options for inspector b31888a Fix incorrect pxe-enabled was set during introspection f416673 Merge jobs 610228a Imported Translations from Zanata 7166617 Accept IPv6 link local address during interface validation 463cc07 Remove cimc_address from address field list 2b87caa CI: make grenade voting again 47315f9 devstack: Use uwsgi binary from path; temporary disable grenade 52138f2 Update doc for multi-arch x86 80167d4 Use unittest.mock instead of mock 6175bc4 [doc] Add misconfigured BMC channel to trouble shooting guide 196c019 Enable Basic HTTP authentication middleware. 7470320 Remove introspection timeout option 5004f93 Update lower-constraints.txt 542db84 Set default timeouts for ironic inspector base job 5960cde Cap jsonschema 3.2.0 as the minimal version 5d61513 Add py38 package metadata 06ee500 Set tempest_test_timeout for managed job c2224fd Bump hacking min version to 3.0.1 68ab6a0 Switch to newer openstackdocstheme and reno versions 0a037c5 Increase timeout for introspection in ironic-inspector-tempest-managed 9951b72 Imported Translations from Zanata c044ebd extra_hardware: stop storing raw data in swift b9f1746 Stop configuring install_command in tox. 721bd81 Use latest version of python construct 1818bda Remove translation sections from setup.cfg 5ccef9c Treat endpoints with trailing slashes the same way as without them 9643451 Stop creating a green thread in the introspection unit tests f3e27c1 Make POST /v1/introspection synchronous when manage_boot==False 3d1bf55 Avoid using introspection start delays with non-managed boot b5d3214 Convert jobs to dib a7ef716 Revert disabling the grenade job edfec4c Temporary disbling grenade and non-standalone-tempest 6ba9e00 [docs] remove the horribly outdated version support matrix bb71167 Fix grenade job a02fcd1 Add variable to set inspection timeout in tempest tests fe15db0 Silence debug logging from oslo_messaging 8a02e5a Stop running a periodic task for the noop PXE filter 6e38eff Stop aborting the process on periodic task failures 1b972c7 Monkey patch original current_thread _active 8211ab4 Update local.conf example file. 84c47d9 Cleanup deprecated [swift]max_retries 41b3323 [trivial] Remove duplicate entry in lldp test d580714 Remove testresources and testscenarios from test-requirements cee5922 Hacking: enforce usage of autospec=True in tests c4a057c Imported Translations from Zanata a5a81cf Add Python3 victoria unit tests 3c23ad1 Update master for stable/ussuri 61cd2af Upgrade flake8-import-order version to 0.17.1 773b199 No need to import print function anymore Diffstat (except docs and test files) ------------------------------------- api-ref/source/conf.py | 36 +--- babel.cfg | 1 - devstack/example.local.conf | 60 ++++--- devstack/plugin.sh | 6 +- ironic_inspector/cmd/__init__.py | 6 + ironic_inspector/cmd/migration.py | 2 - ironic_inspector/common/coordination.py | 35 ++++ ironic_inspector/common/lldp_parsers.py | 13 +- ironic_inspector/common/lldp_tlvs.py | 16 +- ironic_inspector/conductor/manager.py | 95 ++++++---- ironic_inspector/conf/default.py | 32 +++- ironic_inspector/conf/discovery.py | 2 + ironic_inspector/conf/opts.py | 5 +- ironic_inspector/conf/processing.py | 5 + ironic_inspector/conf/swift.py | 3 - ironic_inspector/introspect.py | 42 +++-- .../locale/en_GB/LC_MESSAGES/ironic_inspector.po | 57 ++++-- ironic_inspector/main.py | 27 ++- ironic_inspector/node_cache.py | 5 +- ironic_inspector/plugins/discovery.py | 2 +- ironic_inspector/plugins/extra_hardware.py | 19 -- ironic_inspector/plugins/lldp_basic.py | 1 - ironic_inspector/plugins/local_link_connection.py | 5 +- ironic_inspector/plugins/standard.py | 6 +- ironic_inspector/pxe_filter/base.py | 3 + ironic_inspector/test/functional.py | 43 ++++- ironic_inspector/test/unit/test_common_ironic.py | 6 +- ironic_inspector/test/unit/test_introspect.py | 38 +++- ironic_inspector/test/unit/test_iptables.py | 2 +- ironic_inspector/test/unit/test_main.py | 85 ++++++--- ironic_inspector/test/unit/test_manager.py | 62 ++----- ironic_inspector/test/unit/test_migrations.py | 22 +-- ironic_inspector/test/unit/test_node_cache.py | 13 +- .../test/unit/test_plugins_base_physnet.py | 3 +- .../test/unit/test_plugins_discovery.py | 23 +++ .../test/unit/test_plugins_extra_hardware.py | 73 +------- .../test/unit/test_plugins_lldp_basic.py | 25 ++- .../unit/test_plugins_local_link_connection.py | 3 +- .../test/unit/test_plugins_pci_devices.py | 18 +- .../test/unit/test_plugins_physnet_cidr_map.py | 14 +- .../test/unit/test_plugins_standard.py | 23 +-- ironic_inspector/test/unit/test_process.py | 9 +- ironic_inspector/test/unit/test_pxe_filter.py | 12 +- ironic_inspector/test/unit/test_utils.py | 5 + ironic_inspector/test/unit/test_wsgi_service.py | 10 ++ ironic_inspector/utils.py | 12 +- lower-constraints.txt | 110 ++++++++++-- ...to-turn-off-periodic-sync-5309ff2aa8a9ec14.yaml | 8 + ...accept-link-local-address-1fbb9cbdc3f980bb.yaml | 5 + .../notes/construct-fly-free-fab62c0a5cb71fa5.yaml | 6 + .../notes/enroll-node-fields-3f4e22213fd90307.yaml | 5 + .../extra-hardware-data-2346f0163e4b7699.yaml | 7 + .../notes/http-basic-auth-fbe1da9669f5388c.yaml | 27 +++ .../notes/leader-election-c6692d9962f30ad1.yaml | 6 + releasenotes/notes/node-id-920629472f01c83a.yaml | 5 + releasenotes/notes/periodics-18bf7fb57777c043.yaml | 4 + .../pxe-enabled-for-pxe-a199e81128557bc0.yaml | 6 + ...swift-max-retries-removal-8f3c117240448760.yaml | 4 + .../notes/trailing-slashes-93c2466b71829ec1.yaml | 5 + .../notes/unmanaged-delay-d39871e1346d9448.yaml | 6 + .../notes/unmanaged-result-4de3788e7820e3c5.yaml | 6 + releasenotes/source/conf.py | 9 +- releasenotes/source/index.rst | 1 + .../locale/en_GB/LC_MESSAGES/releasenotes.po | 194 ++++++++++++++++++++- releasenotes/source/train.rst | 6 +- releasenotes/source/ussuri.rst | 6 + requirements.txt | 10 +- setup.cfg | 15 +- test-requirements.txt | 12 +- tox.ini | 4 +- zuul.d/ironic-inspector-jobs.yaml | 38 ++-- zuul.d/project.yaml | 8 +- 76 files changed, 1055 insertions(+), 521 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 95c0dd4..27b08bb 100644 --- a/requirements.txt +++ b/requirements.txt @@ -5,2 +5,2 @@ automaton>=1.9.0 # Apache-2.0 -alembic>=0.8.10 # MIT -construct<2.9,>=2.8.10 # MIT +alembic>=0.9.6 # MIT +construct>=2.9.39 # MIT @@ -10 +10 @@ futurist>=1.2.0 # Apache-2.0 -ironic-lib>=2.17.0 # Apache-2.0 +ironic-lib>=4.3.0 # Apache-2.0 @@ -12,2 +12,2 @@ jsonpath-rw<2.0,>=1.2.0 # Apache-2.0 -jsonschema>=2.6.0 # MIT -keystoneauth1>=3.14.0 # Apache-2.0 +jsonschema>=3.2.0 # MIT +keystoneauth1>=4.2.0 # Apache-2.0 diff --git a/test-requirements.txt b/test-requirements.txt index ce6c002..be6935d 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -8,3 +8,3 @@ doc8>=0.6.0 # Apache-2.0 -flake8-import-order>=0.13 # LGPLv3 -hacking>=3.0.0,<3.1.0 # Apache-2.0 -sphinx!=1.6.6,!=1.6.7,>=1.6.2 # BSD +flake8-import-order>=0.17.1 # LGPLv3 +hacking>=3.0.1,<3.1.0 # Apache-2.0 +sphinx>=2.0.0,!=2.1.0 # BSD @@ -13 +13 @@ sphinxcontrib-apidoc>=0.2.0 # BSD -openstackdocstheme>=1.31.2 # Apache-2.0 +openstackdocstheme>=2.2.0 # Apache-2.0 @@ -17 +17 @@ stestr>=1.0.0 # Apache-2.0 -reno>=2.5.0 # Apache-2.0 +reno>=3.1.0 # Apache-2.0 @@ -19,2 +18,0 @@ fixtures>=3.0.0 # Apache-2.0/BSD -testresources>=2.0.0 # Apache-2.0/BSD -testscenarios>=0.4 # Apache-2.0/BSD

1 0

oslo.policy 2.1.3 (stein)
by no-reply＠openstack.org 08 Jul '20

08 Jul '20

We are tickled pink to announce the release of: oslo.policy 2.1.3: Oslo Policy library This release is part of the stein stable release series. The source is available from: https://opendev.org/openstack/oslo.policy Download the package from: https://pypi.org/project/oslo.policy Please report issues through: https://bugs.launchpad.net/oslo.policy/+bugs For more details, please see below. 2.1.3 ^^^^^ Bug Fixes * [bug 1880959 (https://bugs.launchpad.net/keystone/+bug/1880959) The behavior of policy file reloading from policy directories was fixed. Previously the rules from policy files located in the directories specified in the "policy_dirs" option were not reapplied after the rules from the primary policy file have been reapplied due to a change. Changes in oslo.policy 2.1.2..2.1.3 ----------------------------------- a49f31d Reload files in policy_dirs on primary file change Diffstat (except docs and test files) ------------------------------------- oslo_policy/policy.py | 41 +++++++++++++++++---- .../notes/bug-1880959-8f1370a59759d40d.yaml | 8 ++++ 3 files changed, 85 insertions(+), 7 deletions(-)

1 0

oslo.policy 2.3.4 (train)
by no-reply＠openstack.org 08 Jul '20

08 Jul '20

We high-spiritedly announce the release of: oslo.policy 2.3.4: Oslo Policy library This release is part of the train stable release series. The source is available from: https://opendev.org/openstack/oslo.policy Download the package from: https://pypi.org/project/oslo.policy Please report issues through: https://bugs.launchpad.net/oslo.policy/+bugs For more details, please see below. 2.3.4 ^^^^^ Bug Fixes * [bug 1880959 (https://bugs.launchpad.net/keystone/+bug/1880959) The behavior of policy file reloading from policy directories was fixed. Previously the rules from policy files located in the directories specified in the "policy_dirs" option were not reapplied after the rules from the primary policy file have been reapplied due to a change. Changes in oslo.policy 2.3.3..2.3.4 ----------------------------------- 5904564 Reload files in policy_dirs on primary file change Diffstat (except docs and test files) ------------------------------------- oslo_policy/policy.py | 41 +++++++++++++++++---- .../notes/bug-1880959-8f1370a59759d40d.yaml | 8 ++++ 3 files changed, 85 insertions(+), 7 deletions(-)

1 0

bifrost 8.2.0 (victoria)
by no-reply＠openstack.org 08 Jul '20

08 Jul '20

We jubilantly announce the release of: bifrost 8.2.0: Deployment of physical machines using OpenStack Ironic and Ansible This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/bifrost Download the package from: https://tarballs.openstack.org/bifrost/ Please report issues through: https://storyboard.openstack.org/#!/project/openstack/bifrost For more details, please see below. 8.2.0 ^^^^^ New Features ************ * It is now possible to use the "bifrost" cloud with introspection commands even in no-auth mode. * Debian Buster is now supported as a base operating system. * Configures the default deploy and rescue kernel/ramdisk, setting them in "driver_info" is now optional. * Ubuntu Focal (20.04) is now supported as a base operating system. * The values of "enabled_bios_interfaces", "enabled_boot_interfaces", "enabled_management_interfaces" and "enabled_power_interfaces" are now derived from the "enabled_hardware_types" if left empty (the default). * Adds a new parameter "internal_ip" specifying which IP address to use for nodes to reach ironic and the HTTP server, and for cross- service interactions when keystone is disabled. By default the IPv4 address of the "network_interface" is used. * The "manual-management" hardware type is now enabled by default. It can be used with hardware that does not feature a supported BMC. * The "noop" management interface can now be used out-of-box with "ipmi" and "redfish" nodes to prevent ironic from changing the boot device and order. * MetalSmith (https://docs.openstack.org/metalsmith/) is now installed by default. * A normal ironic "nodes.json" (suitable for the "baremetal create" command) is now generated when creating testing VMs. The default location is "/tmp/nodes.json". * Sets the default resource class for newly enrolled nodes without an explicit resource class. Defaults to "baremetal", can be changed via the "default_resource_class" parameter. * Fedora 30 is now supported as a base operating system. * Adds two new parameters for controlling how existing git checkouts are handled: * "update_repos" can be set to "false" to prevent the repositories from being updated. * "force_update_repos" can be set to "false" to prevent Bifrost from overwriting local changes. * Changes the default version of Ansible to version 2.9. * The new variable "use_tinyipa" (defaulting to "true") defines whether to use the pre-built tinyIPA images or production-ready CentOS images built with DIB. Upgrade Notes ************* * Explicit support for Fedora versions precedent to 30 has been removed. * Explicit support for Debian Jessie has been removed. * OpenStackClient is no longer installed when keystone is not enabled. Use the ironic native "baremetal" command instead. For example, instead of openstack baremetal node list use just baremetal node list * The shade library is no longer used, nor installed by default. * The default version of Ansible used for this release of bifrost is version 2.9. Operators may wish to upgrade if they are directly invoking playbooks or roles. * All packages are now installed in a virtual environment in "/opt/stack/bifrost" by default instead of system-wide. Deprecation Notes ***************** * The "bifrost-inspector" cloud in "clouds.yaml" is now deprecated, use the main "bifrost" cloud for all commands. * The "os_ironic_facts" module is deprecated. Please use "os_ironic_node_info" that returns information in the "node" parameter. * Support for system-wide installation of packages is deprecated, untested and may be removed in a future release. Bug Fixes ********* * Fixes installing Keystone under CentOS 8. * Fixes failure to install on systems with a local resolved by setting "disable_dnsmasq_dns" to "True" by default. * Fixes fast-track deployment after inspection/discovery by providing the correct ironic API URL to the ramdisk. * Fixes deployment in a testing environment on CentOS 8 by using firewalld instead of iptables to enable access from nodes to ironic. * An ironic-python-agent image is now updated every time the installation playbooks are run. This is done to avoid discrepancy between ironic and the ramdisk on updates. Set "update_ipa" to "false" to prevent the ramdisk update (not recommended) or "update_repos" to "false" to disable any updates. Other Notes *********** * Support for Ubuntu Xenial and Debian Stretch has been officially removed (Bifrost has been broken on them since Ussuri because of the transition to Python 3.6). Changes in bifrost 8.0.0..8.2.0 ------------------------------- 0b58a05 Do not use 'sudo pip install' when venv is used 3d2ee60 Prepare release notes for release 8.2 00ac26e Fix bifrost_venv_dir default assignment deaa4d7 Use firewalld to open ports on CentOS and RHEL. 27d8752 install-deps: install setuptools early for Debian dbb3f24 Get rid of venv_python_path f5906a9 Derive enabled hardware interfaces from enabled_hardware_types c0499c4 Consolidate the default IP address handling fa1b8ea Add openstack collection 77a5ad3 CI: clean up non-votings jobs ec72e0c Make bifrost more metalsmith-friendly 835a487 Fix fast-track deployment after discovery/inspection 188e121 Update IPA if update_repos is true (the default) ed26a19 Only install proliantutils if ilo is enabled; support idrac 2c9ede3 Migrate pip_install.yml to a new role bifrost-pip-install 99b93f4 Remove the ansible_pkg_mgr hack a78e64b Allow changing 'update' and 'force' when cloning repos a071eb9 Update ansible versions in README of the roles 9f78723 Remove the workaround for PEP517 issues 7283e3d Convert with_items to loop 1ddaf56 reno: update release versions for Ussuri and Train 12c6f71 Quick start Bifrost CLI 3fe85c5 Add an option to use pre-built DIB images 59a0185 Install packages all at once instead of looping over them 81389bc drop mock from lower-constraints 3ffa9c7 Fix bifrost_inventory.py with no nodes enrolled d5a279a bifrost-create-vm-nodes: generate a normal nodes.json 0477e45 Set default deploy/rescue kernel/ramdisk in ironic.conf a077a50 Remove empty files from the roles 23f467b Restore installing DIB-specific dependencies 9c9c014 Moving to ansible 2.9 8aa8086 Switch to using virtual envs by default b86f478 Set disable_dnsmasq_dns to True 4b2913a Documentation: minor fixes in the user guide 1dfe31d Documentation: reorder the contributors guide 7e363d4 Drop hard requirement on debootstrap and EPEL c9866a0 Enable manual-management and the noop management interface 8593f23 Install uWSGI from PyPI to repair CentOS 8 support 6f44cd8 Stop supporting non-systemd systems 8b43bf0 Get rid of the shade dependency 95e78f1 Install metalsmith by default 85e1b82 CI: reduce memory and disk for testing nodes e35293b Support Ubuntu Focal (20.04) 979bcae Remove support for Ubuntu Xenial and Debian Stretch ccdfa1d Support Debian Buster and add CI jobs for it 7a7022b [Trivial] Correct a typo in the docs 3532919 Avoid running functional jobs for api-ref changes ccfe458 Follow up on add Fedora 30 support d8e8297 Add Fedora 30 based job d8ff9ff CI: move the libvirt storage pool to /opt 5182388 Fix pip3 path d75a07c Fix check packages command 2be8ee6 Fix detection of mkisofs bb807b2 Correct handling enable_venv in pip_install.yml d804de8 Remove explicit support for EOL Fedora versions and Debian Jessie a381b0f install-deps: use system pip and bindep for installing dependencies 08b5bd7 Deprecate a separate bifrost-inspector cloud 0b7fd20 Stop installing openstackclient if keystone is not enabled 8b7a41e Make the keystone job voting and re-enable commented out jobs 28eb779 Fix pygments style c1c360c Update docs references for CentOS 8 cc415e5 Install python3-pip system package 5d126e3 Switch to newer openstackdocstheme and reno versions 50132a8 Remove .testr.conf 327cc85 Remove the unused coding style modules 62ccb03 Remove translation sections from setup.cfg 999e1bb Update lower-constraints.txt ceb5a49 Add py38 package metadata 80022d9 No need to import print from future anymore f1cbedd Add Python3 victoria unit tests ad48cad Update master for stable/ussuri 556ce37 Upgrade flake8-import-order version to 0.17.1 Diffstat (except docs and test files) ------------------------------------- .gitignore | 4 + .testr.conf | 7 - ansible-collection-requirements.yml | 4 + babel.cfg | 2 - bifrost-cli | 13 ++ bifrost/__init__.py | 10 +- bifrost/cli.py | 240 +++++++++++++++++++++ bifrost/inventory.py | 56 ++--- bindep.txt | 4 + lower-constraints.txt | 30 +-- playbooks/ci/run.yaml | 4 +- playbooks/example-deploy-all-available-nodes.yaml | 8 +- playbooks/library/os_ironic_facts.py | 148 +------------ playbooks/library/os_ironic_node_info.py | 178 +++++++++++++++ playbooks/redeploy-dynamic.yaml | 15 +- .../bifrost-configdrives-dynamic/handlers/main.yml | 2 - .../bifrost-configdrives-dynamic/meta/main.yml | 6 +- .../bifrost-configdrives-dynamic/tasks/main.yml | 24 +-- .../tasks/update_facts_from_ironic.yaml | 3 +- .../roles/bifrost-create-bootable-image/README.md | 2 +- playbooks/roles/bifrost-create-dib-image/README.md | 4 +- .../bifrost-create-dib-image/defaults/main.yml | 4 +- .../roles/bifrost-create-dib-image/meta/main.yml | 6 +- .../roles/bifrost-create-dib-image/tasks/main.yml | 16 +- .../bifrost-create-vm-nodes/defaults/main.yml | 7 +- .../defaults/required_defaults_Debian.yml | 4 +- .../defaults/required_defaults_Debian_jessie.yml | 2 - .../defaults/required_defaults_Ubuntu_20.04.yml | 14 ++ .../bifrost-create-vm-nodes/handlers/main.yml | 2 - .../roles/bifrost-create-vm-nodes/meta/main.yml | 6 +- .../bifrost-create-vm-nodes/tasks/create_vm.yml | 15 ++ .../roles/bifrost-create-vm-nodes/tasks/main.yml | 46 ++-- .../tasks/prepare_libvirt.yml | 32 +-- .../roles/bifrost-create-vm-nodes/vars/main.yml | 2 - .../bifrost-deploy-nodes-dynamic/defaults/main.yml | 1 + .../bifrost-deploy-nodes-dynamic/handlers/main.yml | 2 - .../bifrost-deploy-nodes-dynamic/meta/main.yml | 6 +- .../bifrost-deploy-nodes-dynamic/tasks/main.yml | 6 +- .../bifrost-deploy-nodes-dynamic/vars/main.yml | 2 - playbooks/roles/bifrost-ironic-install/README.md | 21 +- .../roles/bifrost-ironic-install/defaults/main.yml | 51 +++-- .../defaults/required_defaults_Debian_family.yml | 5 +- .../defaults/required_defaults_Debian_jessie.yml | 37 ---- ..._Fedora_26.yml => required_defaults_Fedora.yml} | 41 ++-- .../defaults/required_defaults_Fedora_22.yml | 5 - .../defaults/required_defaults_Fedora_25.yml | 42 ---- .../defaults/required_defaults_Fedora_27.yml | 43 ---- .../defaults/required_defaults_RedHat_family.yml | 5 +- .../defaults/required_defaults_Suse_family.yml | 3 - ...untu_16.04.yml => required_defaults_Ubuntu.yml} | 5 +- .../defaults/required_defaults_Ubuntu_18.04.yml | 36 ---- .../bifrost-ironic-install/tasks/bootstrap.yml | 62 ++++-- .../tasks/create_tftpboot.yml | 2 +- .../tasks/download_ipa_image.yml | 27 +-- .../bifrost-ironic-install/tasks/get_ipxe.yml | 9 +- .../bifrost-ironic-install/tasks/hw_types.yml | 45 ++++ .../tasks/inspector_bootstrap.yml | 27 ++- .../tasks/inspector_install.yml | 30 +-- .../roles/bifrost-ironic-install/tasks/install.yml | 167 +++++++------- .../bifrost-ironic-install/tasks/ironic_config.yml | 6 +- .../tasks/keystone_setup.yml | 28 +-- .../tasks/keystone_setup_inspector.yml | 20 +- .../bifrost-ironic-install/tasks/pip_install.yml | 81 ------- .../tasks/staging_install.yml | 13 +- .../roles/bifrost-ironic-install/tasks/start.yml | 7 +- .../bifrost-ironic-install/tasks/vendor_deps.yml | 26 +++ .../templates/dnsmasq.conf.j2 | 4 +- .../templates/inspector-default-boot-ipxe.j2 | 2 +- .../templates/ironic.conf.j2 | 16 +- .../templates/systemd_template.j2 | 2 +- .../templates/clouds.yaml.j2 | 5 +- .../bifrost-keystone-install/defaults/main.yml | 8 +- .../defaults/required_defaults_Debian_family.yml | 8 +- .../defaults/required_defaults_Debian_jessie.yml | 19 -- .../defaults/required_defaults_Fedora_22.yml | 5 - .../defaults/required_defaults_RedHat_family.yml | 6 +- .../defaults/required_defaults_Suse_family.yml | 5 +- ...untu_18.04.yml => required_defaults_Ubuntu.yml} | 6 - .../defaults/required_defaults_Ubuntu_16.04.yml | 19 -- .../files/keystone_policy.te | 11 + .../roles/bifrost-keystone-install/meta/main.yml | 8 +- .../bifrost-keystone-install/tasks/bootstrap.yml | 36 +++- .../bifrost-keystone-install/tasks/install.yml | 105 +++------ .../bifrost-keystone-install/tasks/pip_install.yml | 78 ------- .../roles/bifrost-keystone-install/tasks/start.yml | 3 +- .../templates/systemd_template.j2 | 2 +- .../roles/bifrost-openstack-ci-prep/README.md | 5 +- .../roles/bifrost-openstack-ci-prep/vars/main.yml | 2 - playbooks/roles/bifrost-pip-install/README.md | 32 +++ .../roles/bifrost-pip-install/defaults/main.yml | 17 ++ playbooks/roles/bifrost-pip-install/tasks/main.yml | 78 +++++++ playbooks/roles/bifrost-prep-for-install/README.md | 10 +- .../bifrost-prep-for-install/defaults/main.yml | 11 +- .../roles/bifrost-prep-for-install/tasks/main.yml | 8 +- .../handlers/main.yml | 2 - .../tasks/main.yml | 2 +- .../bifrost-prepare-for-test-dynamic/vars/main.yml | 2 - playbooks/roles/bifrost-rabbitmq/tasks/main.yml | 4 +- .../roles/bifrost-test-dhcp/defaults/main.yml | 2 - .../roles/bifrost-test-dhcp/files/test-dhcp.py | 1 - .../roles/bifrost-test-dhcp/handlers/main.yml | 3 - playbooks/roles/bifrost-test-dhcp/vars/main.yml | 2 - .../bifrost-test-inspection/defaults/main.yml | 2 - .../bifrost-test-inspection/handlers/main.yml | 2 - .../roles/bifrost-test-inspection/tasks/main.yml | 4 +- .../roles/bifrost-test-inspection/vars/main.yml | 2 - playbooks/roles/bifrost-test-vm/defaults/main.yml | 2 - playbooks/roles/bifrost-test-vm/handlers/main.yml | 2 - playbooks/roles/bifrost-test-vm/vars/main.yml | 2 - .../handlers/main.yml | 2 - .../bifrost-unprovision-node-dynamic/vars/main.yml | 2 - .../roles/ironic-delete-dynamic/handlers/main.yml | 2 - .../roles/ironic-delete-dynamic/vars/main.yml | 2 - playbooks/roles/ironic-enroll-dynamic/README.md | 4 +- .../roles/ironic-enroll-dynamic/handlers/main.yml | 2 - .../roles/ironic-enroll-dynamic/tasks/main.yml | 5 +- .../roles/ironic-enroll-dynamic/vars/main.yml | 2 - playbooks/roles/ironic-inspect-node/README.md | 4 +- .../roles/ironic-inspect-node/handlers/main.yml | 2 - playbooks/roles/ironic-inspect-node/vars/main.yml | 2 - playbooks/roles/venv_python_path/tasks/main.yml | 33 --- playbooks/test-bifrost.yaml | 11 +- .../ancient-fedora-jessie-773ba251b28f4a94.yaml | 6 + .../notes/bifrost-inspector-a154561802d8d614.yaml | 9 + .../notes/centos-keystone-acad21e70153067d.yaml | 4 + .../notes/debian-buster-dd7cfde9908deb09.yaml | 4 + .../notes/default-ipa-fe012dfdba580bf4.yaml | 5 + .../disable_dnsmasq_dns-0d545cdaa81b92a2.yaml | 5 + .../fast-track-inspection-a28a062e86f06190.yaml | 5 + releasenotes/notes/firewalld-d53c6396828b91ee.yaml | 5 + releasenotes/notes/focal-36208207a571f354.yaml | 4 + releasenotes/notes/hw-types-17106c0397f34ef1.yaml | 6 + .../notes/internal-address-c1f9ffb731373ea3.yaml | 7 + .../notes/manual-management-c204a200b0f0e6e0.yaml | 9 + .../notes/metalsmith-7044429597a5f137.yaml | 5 + releasenotes/notes/no-osc-b39d14591103b2c3.yaml | 15 ++ releasenotes/notes/no-shade-b861f699b8a9919f.yaml | 8 + releasenotes/notes/no-xenial-1c27b7bb2cf165ed.yaml | 6 + .../notes/nodes.json-d47a30a22a04c7ed.yaml | 6 + .../notes/resource-class-243535c9049cbd73.yaml | 6 + .../notes/support-fedora-3b14bffb24097b28.yaml | 4 + .../notes/update-ipa-76691dbca92246b6.yaml | 8 + .../notes/update-repos-b60563ee51b574fc.yaml | 10 + ...pdate_default_ansible_2.9-e96335c0ef609642.yaml | 9 + .../notes/use-tinyipa-31f5343def1c0bf4.yaml | 6 + .../notes/venv-default-895f7b633803297f.yaml | 9 + releasenotes/source/conf.py | 12 +- releasenotes/source/index.rst | 1 + releasenotes/source/train.rst | 2 +- releasenotes/source/ussuri.rst | 6 + scripts/collect-test-info.sh | 4 +- scripts/env-setup.sh | 26 ++- scripts/install-deps.sh | 133 ++++-------- scripts/split_json.py | 2 - scripts/test-bifrost.sh | 113 ++++------ setup.cfg | 15 +- test-requirements.txt | 3 + tox.ini | 3 + zuul.d/bifrost-jobs.yaml | 46 ++-- zuul.d/project.yaml | 26 ++- 176 files changed, 1689 insertions(+), 1546 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index 64ddfa3..08571a1 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -15,0 +16,3 @@ Pygments>=2.2.0 # BSD license +flake8-import-order>=0.17.1 # LGPLv3 + +openstacksdk>=0.37.0 # Apache-2.0

1 0

ironic 13.0.5 (train)
by no-reply＠openstack.org 08 Jul '20

08 Jul '20

We are overjoyed to announce the release of: ironic 13.0.5: OpenStack Bare Metal Provisioning This release is part of the train stable release series. The source is available from: https://opendev.org/openstack/ironic Download the package from: https://tarballs.openstack.org/ironic/ Please report issues through: https://storyboard.openstack.org/#!/project/943 For more details, please see below. 13.0.5 ^^^^^^ Bug Fixes * Fixes a rare issue when agent successfully powers off a node after deployment, but ironic never learns about it and does another reboot. * Cleans up nodes stuck in the "deleting" state on conductor restart. * Fixes fast-track deployments with the "direct" deploy interface that used to hang previously. * Fixes a workaround for hardware that does not support persistent boot device setting with the "redfish" or "idrac-redfish" management interface implementation. When such situation is detected, ironic falls back to one-time boot device setting, restoring it on every reboot or power on. For more information, see story 2007733 (https://storyboard.openstack.org/#!/story/2007733) * No longer tries to set "local_gb" to "MAX" when building RAID with the root disk using "MAX" for its size. Changes in ironic 13.0.4..13.0.5 -------------------------------- fa6c71ff1 Software RAID: don't try to set local_gb to MAX a436d666d Fix the error message when reached max number of traits 94d74f2de Clean up nodes in DELETING on conductor restart 089b84e4c Fix fast-track with the direct deploy interface 49ce9993e Fix Redfish handle no continuous override boot src 87ccb8376 devstack: Use uwsgi binary from path; temporary disable grenade b7c4ce4ca agent: do not hard power off if soft power off actually succeeds Diffstat (except docs and test files) ------------------------------------- devstack/lib/ironic | 2 +- ironic/common/raid.py | 3 +- ironic/common/states.py | 4 +- ironic/conductor/manager.py | 5 ++- ironic/db/sqlalchemy/api.py | 12 +++--- ironic/drivers/modules/agent.py | 17 ++++----- ironic/drivers/modules/agent_base_vendor.py | 17 +++++++-- ironic/drivers/modules/redfish/management.py | 23 ++++++------ .../unit/drivers/modules/test_agent_base_vendor.py | 43 +++++++++++++++++++++- .../notes/agent-power-off-2115fcfaac030bd0.yaml | 5 +++ releasenotes/notes/deleting-dcdb9cf0d2a6a1a6.yaml | 4 ++ .../notes/direct-fast-track-d0f43850b6e80751.yaml | 5 +++ ...edfish-sadness-workaround-ed02cb310ff369f4.yaml | 11 ++++++ releasenotes/notes/raid-max-c0920cc44b9779ee.yaml | 5 +++ zuul.d/project.yaml | 5 ++- 19 files changed, 158 insertions(+), 44 deletions(-)

1 0

ironic-python-agent 5.0.3 (train)
by no-reply＠openstack.org 08 Jul '20

08 Jul '20

We are glad to announce the release of: ironic-python-agent 5.0.3: Ironic Python Agent Ramdisk This release is part of the train stable release series. The source is available from: https://opendev.org/openstack/ironic-python-agent Download the package from: https://tarballs.openstack.org/ironic-python-agent/ Please report issues through: https://storyboard.openstack.org/#!/project/openstack/ironic- python-agent For more details, please see below. 5.0.3 ^^^^^ Bug Fixes * Fixes deployment failures when the image download is interrupted mid-stream while the contents are being downloaded. Previously retries were limited to only opening the initial connection. * Fixes the short timeout retries interval, which was previously "5" seconds, to a length that will allow the agent to retry after a network interruption. The time between retries is now "10" seconds, and the number of retries are set to "9" to help ensure intermittent network outages do not cause recoverable failures. * Speeds up going from inspection to cleaning with fast-track enabled by caching hardware information between the steps. * Fixes serializing exceptions originating from ironic-lib. Previously an attempt to do so would result in a "TypeError", for example: *Object of type 'InstanceDeployFailure' is not JSON serializable*. * Fixes failure to detect a hung file download connection in the event that the kernel has not rapidly detected that the remote server has hung up the socket. This can happen when there is intermittent and transient connectivity issues such as those that can occur due to LACP failure response hold-downs timers in switching fabrics. Changes in ironic-python-agent 5.0.2..5.0.3 ------------------------------------------- 3e053f0 Limit Inspection->Lookup->Heartbeat lag 7c036fa Fix serializing ironic-lib exceptions 72ba11a Extend retries to 9, 10 seconds apart. 0e34f02 Add full download retries db925ba Add timeout operations to try and prevent hang on read() cf28f3a Fix confusing logging when running asynchronous commands 167b98f Omit configdrive and system_logs from logging Diffstat (except docs and test files) ------------------------------------- ironic_python_agent/agent.py | 11 ++- ironic_python_agent/config.py | 4 +- ironic_python_agent/encoding.py | 12 +++ ironic_python_agent/extensions/base.py | 30 ++++--- ironic_python_agent/extensions/standby.py | 100 ++++++++++++++++----- ironic_python_agent/hardware.py | 20 +++++ ironic_python_agent/inspector.py | 2 +- ironic_python_agent/utils.py | 22 +++++ ...y-retries-image-downloads-67409a493c6d08ae.yaml | 6 ++ .../extend-retry-timeout-30c930a33d97c193.yaml | 8 ++ .../notes/inspect-to-clean-b3616d843775c187.yaml | 5 ++ releasenotes/notes/lib-exc-41ee122eb4a04bc4.yaml | 6 ++ .../timeout_on_file_download-ed77918318316075.yaml | 9 ++ 20 files changed, 349 insertions(+), 47 deletions(-)

1 0

keystoneauth1 3.17.3 (train)
by no-reply＠openstack.org 06 Jul '20

06 Jul '20

We are chuffed to announce the release of: keystoneauth1 3.17.3: Authentication Library for OpenStack Identity This release is part of the train stable release series. The source is available from: https://opendev.org/openstack/keystoneauth1 Download the package from: https://pypi.org/project/keystoneauth1 For more details, please see below. 3.17.3 ^^^^^^ Bug Fixes * [bug 1876317 (https://bugs.launchpad.net/keystoneauth/+bug/1876317) The v3 authentication plugins now attempt to add /v3 to the token path if it's not present on the authentication URL. Changes in keystoneauth1 3.17.2..3.17.3 --------------------------------------- 7d7b956 Inject /v3 in token path for v3 plugins Diffstat (except docs and test files) ------------------------------------- keystoneauth1/identity/v3/base.py | 6 +++++- .../notes/bug-1876317-1db97d1b12a3e4b4.yaml | 6 ++++++ 3 files changed, 35 insertions(+), 1 deletion(-)

1 0

sushy-tools 0.11.0
by no-reply＠openstack.org 06 Jul '20

06 Jul '20

We high-spiritedly announce the release of: sushy-tools 0.11.0: A set of tools to support the development and test of the Sushy library (https://docs.openstack.org/sushy/) The source is available from: https://opendev.org/openstack/sushy-tools Download the package from: https://tarballs.openstack.org/sushy-tools/ For more details, please see below. 0.11.0 ^^^^^^ New Features * Adds basic support for virtual media devices on non-IDE buses, such as SATA and SCSI, as IDE devices are not supported on Q35 libvirt domains. Changes in sushy-tools 0.10.0..0.11.0 ------------------------------------- ff2be83 Support non-ide virtual media buses dea62db vmedia: fix TypeError when accessing a URL without content-disposition Diffstat (except docs and test files) ------------------------------------- ...rtual-media-alternate-bus-6d984ae45acb7ac4.yaml | 5 ++ .../emulator/resources/systems/libvirtdriver.py | 24 ++++-- .../emulator/resources/vmedia/staticdriver.py | 4 +- .../emulator/resources/systems/test_libvirt.py | 97 +++++++++++++++++++++- .../unit/emulator/resources/vmedia/test_static.py | 86 +++++++++++++++++++ 7 files changed, 256 insertions(+), 8 deletions(-)

1 0