- Release-announce - lists.openstack.org

kolla-ansible 18.3.0 (caracal)
by no-reply＠openstack.org 05 Dec '24

05 Dec '24

We contentedly announce the release of: kolla-ansible 18.3.0 This release is part of the caracal release series. The source is available from: https://opendev.org/openstack/kolla-ansible Download the package from: https://tarballs.openstack.org/kolla-ansible/ Please report issues through: https://bugs.launchpad.net/kolla-ansible/+bugs For more details, please see below. 18.3.0 ^^^^^^ New Features ************ * Adds the ability to provide the NTP (time source) server for multiple DHCP ranges in the Ironic Inspector DHCP server. Upgrade Notes ************* * Support for failing execution early if fact collection fails on any of the hosts by setting "kolla_ansible_setup_any_errors_fatal" to "true" has been removed. This is due to Ansible's "any_errors_fatal" parameter not being templated, resulting in the value always being interpreted as "true", even though the default value of "kolla_ansible_setup_any_errors_fatal" is "false". Equivalent behaviour is possible by setting the maximum failure percentage to 0. This may be done specifically for fact gathering using "gather_facts_max_fail_percentage" or globally using "kolla_max_fail_percentage". Bug Fixes ********* * Fixes an issue with ironic dnsmasq failing to start in deployments using podman because it requires the NET_RAW capability. See LP#2055282. * Fixes kolla-ansible removing inventory file placed in "/etc/kolla/<inventory>". See LP#2052706 for more details. * Fixes keystone service configuration for haproxy when using federation. LP#2058656 * Fixes mariadb's backup failure due to missing *CREATE* privileges on the *mariadb_backup_history* table. LP#2061889 * Fixes the MariaDB recovery issue when kolla-ansible is running from a docker container. LP#2073370 * Fixes #2080552. "openvswitch" role will now set "external- ids:hostname" to "{{ ansible_facts.fqdn }}" instead of "{{ ansible_facts.hostname }}" due to Neutron using FQDN based hostnames in "requested-chassis" field. LP#2080552 * Fix ProxySQL unable to bind due to incorrect format of IPv6 addresses in the *mysql_ifaces* configuration. LP#2081106 * Add missing logrotate config for redis. LP#2084523 * Fixes an issue during fact gathering when using the "--limit" argument where a host that fails to gather facts could cause another host to fail during delegated fact gathering. * Add "skip_kpartx yes" to multipath.conf "defaults" section to prevent kpartx scanning multipath devices and unlock "multipathd del map" operation of os-brick for volume detaching oprtaions. *LP#2078973 <https://launchpad.net/bugs/2078973>`__* * Fixes 2067036. Added "octavia_interface_wait_timeout" to control octavia-interface.service timeout to be able wait openvswitch agent sync has been finished and octavia-lb-net is reachable from the host. Also set restart policy for this unit to on-failure LP#2067036 * Fixes Octavia service upgrade issue where it can fail when Octavia persistence database user is missing. LP#2065591 * Fixes unreliable health checks for neutron_ovn_agent and neutron_ovn_metadata_agent bug. Changed to check OVS DB connection instead of OVN southbound DB connection. LP#2084128 * Fixes an issue, when using podman, with named volumes that use a mode specifier. See LP#2054834 (https://bugs.launchpad.net/kolla- ansible/+bug/2054834) for more details. * Fixes parsing of JSON output of inner modules called by "kolla- toolbox" when data was returned on standard error. LP#2080544 * Updates "proxysql.yaml.j2" to use mariadb_port for backends. This fixes setups where "database_port" and "mariadb_port" differ. Changes in kolla-ansible 18.2.0..18.3.0 --------------------------------------- f661f6fe8 CI: Use debian/ubuntu mirrored images on build 52012101d [stable/2024.1 only] CI: remove openeuler c22e8f4d3 Change from PERCONA_SCHEMA to mysql for mariabackup 05f92c678 CI: Use libpod/registry for registry 99e14950e Fix IPv6 address format in ProxySQL configuration e3be03ac2 Updating proxysql.yaml.j2 to use mariadb_port for backends a134a721b Do not remove inventory file if placed in /etc/kolla 59c8d42b0 Add logrotate config for redis ad38aee54 Fix mariadb backup unable to create history table 8cc772c03 Fix health checks for neutron_ovn_agent and neutron_ovn_metadata_agent 865d041bc Fix Octavia service upgrade failure from 2023.1 68036c19b ovn: Fix FQDN-based deployments 27b41acb5 Add configuration for NTP server in Ironic Inspector DHCP server cb0c675de [CI] Fix OVN jobs - add required neutron_dns_domain f6a918783 Fixing typo in etc/kolla/globals.yml 05eb87dd0 Add a precheck to catch RMQ SLURP upgrades 0a070bf71 Fix octavia-interface timeout a65cdd95f Be clear that rabbitmq-upgrade is not idempotent 683ab0b70 Docs: point to RMQ SLURP handing in upgrade guide 8085144e5 Fix typo in RabbitMQ versions pinning c2fbc36c2 Fix os-brick multipathd del map fails for SAN multipath devices 30e893edb CI: Mark aarch64 non-voting c7e9dbc73 Add NET_RAW to dnsmasq container ab4829db9 systemd: Add Wants=docker.service for docker 9e8d8b6f8 Separate outputs of kolla_toolbox inner module 85a3d5c7b Revert "Allow setting any_errors_fatal true for gather-facts" 33ab87aad Fix links in docs for unmaintained releases 3a0856be2 CI: improve get_logs.sh 60b94d5b6 Avoid unnecessary secondary fact gathering failure c8c94b85c fact gathering: Group hosts before gathering facts b9f72a0a4 fact gathering: Remove gathering of package facts b0407a2ad Fix keystone configuration for haproxy. e486770b9 Fix mariadb recovery 5dae44719 Support mode in named volumes when using podman Diffstat (except docs and test files) ------------------------------------- ansible/gather-facts.yml | 35 ++++--------- ansible/group_vars/all.yml | 8 --- ansible/library/kolla_toolbox.py | 4 +- ansible/module_utils/kolla_podman_worker.py | 8 ++- ansible/module_utils/kolla_systemd_worker.py | 1 + ansible/roles/common/tasks/config.yml | 1 + .../common/templates/cron-logrotate-redis.conf.j2 | 3 ++ ansible/roles/destroy/tasks/cleanup_host.yml | 1 + ansible/roles/ironic/defaults/main.yml | 1 + .../roles/ironic/templates/ironic-dnsmasq.conf.j2 | 5 +- ansible/roles/keystone/defaults/main.yml | 6 ++- .../templates/proxysql/proxysql.yaml.j2 | 6 +-- ansible/roles/mariadb/defaults/main.yml | 2 +- ansible/roles/mariadb/tasks/recover_cluster.yml | 3 ++ ansible/roles/mariadb/tasks/register.yml | 17 +------ .../roles/multipathd/templates/multipath.conf.j2 | 1 + ansible/roles/neutron/defaults/main.yml | 4 +- ansible/roles/octavia/tasks/upgrade.yml | 37 ++++++++++++++ .../octavia/templates/octavia-interface.service.j2 | 4 ++ ansible/roles/openvswitch/defaults/main.yml | 2 +- ansible/roles/rabbitmq/tasks/upgrade.yml | 2 + ansible/roles/rabbitmq/tasks/version-check.yml | 59 ++++++++++++++++++++++ etc/kolla/globals.yml | 10 +--- ...ability-to-ironic-dnsmasq-40f5894c5180b12d.yaml | 6 +++ .../notes/bug-2052706-dfbbc75fc72c74d1.yaml | 7 +++ .../notes/bug-2058656-ad68bb260327a267.yaml | 5 ++ .../notes/bug-2061889-f54e356f43c0fae3.yaml | 6 +++ .../notes/bug-2073370-268e9a76be9f2ae9.yaml | 5 ++ .../notes/bug-2080552-714078144170a5bd.yaml | 8 +++ .../notes/bug-2081106-ef0df790780c612d.yaml | 6 +++ .../notes/bug-2084523-a02f38eecf6c957a.yaml | 5 ++ ...-gathering-double-failure-4662ef2f54d58291.yaml | 6 +++ ...multipathd-kpartx-disable-44732c1378ae2291.yaml | 7 +++ ...octavia-interface-timeout-5e87ea2501d5ab3c.yaml | 10 ++++ ...x-octavia-service-upgrade-9610e35cfdd512f6.yaml | 6 +++ .../notes/fix_ovn_agents_hc-f6e4a39b9d64e9f1.yaml | 8 +++ ...me-issues-when-using-mode-36b9862321eb9e68.yaml | 6 +++ ...ector-multiple-ranges-ntp-32568dcf640a7fc1.yaml | 5 ++ .../kolla-toolbox-demux-c5e8d27bc7214069.yaml | 6 +++ ...sql-template-mariadb-port-cf8f2d88c0962b75.yaml | 5 ++ .../remove-any-errors-fatal-664fc2207074f0ef.yaml | 14 +++++ tools/cleanup-host | 17 ++++++- tools/kolla-ansible | 8 +++ zuul.d/jobs.yaml | 12 ++--- zuul.d/nodesets.yaml | 6 --- zuul.d/project.yaml | 1 - 54 files changed, 374 insertions(+), 115 deletions(-)

1 0

kayobe 17.1.0 (dalmatian)
by no-reply＠openstack.org 05 Dec '24

05 Dec '24

We are stoked to announce the release of: kayobe 17.1.0 This release is part of the dalmatian release series. The source is available from: https://opendev.org/openstack/kayobe Download the package from: https://tarballs.openstack.org/kayobe/ Please report issues through: https://bugs.launchpad.net/kayobe/+bugs For more details, please see below. 17.1.0 ^^^^^^ Bug Fixes * Pin requirements for IPA image build to ensure that the "ironic- lib" version matches "ironic-python-agent". LP#2089263 <https://bugs.launchpad.net/kayobe/+bug/2089263>`__ Changes in kayobe 17.0.0..17.1.0 -------------------------------- 6c42631e CI: use quay.io/podman/hello due too dockerhub rate limits b4a79437 Ensure ironic-python-agent matches ironic-lib Diffstat (except docs and test files) ------------------------------------- ansible/inventory/group_vars/all/ipa | 1 + .../configuration/reference/ironic-python-agent.rst | 17 ++++++++--------- .../notes/pin-ipa-requirements-f9566011b2400e6c.yaml | 6 ++++++ 4 files changed, 17 insertions(+), 11 deletions(-)

1 0

kolla-ansible 19.1.0 (dalmatian)
by no-reply＠openstack.org 05 Dec '24

05 Dec '24

We are satisfied to announce the release of: kolla-ansible 19.1.0 This release is part of the dalmatian release series. The source is available from: https://opendev.org/openstack/kolla-ansible Download the package from: https://tarballs.openstack.org/kolla-ansible/ Please report issues through: https://bugs.launchpad.net/kolla-ansible/+bugs For more details, please see below. 19.1.0 ^^^^^^ Bug Fixes * Fixes external ceph cinder keyring is not imported into libvirt if templated. Per now, ansible/roles/nova-cell/tasks/external_ceph.yml looks cinder_cephx_raw_key up as file from cinder_cephx_keyring_file.stat.path To allow templated cinderkeyrings, the lookup is changed to "template" Fixes LP#2089229 Changes in kolla-ansible 19.0.0..19.1.0 --------------------------------------- 0f2f02274 CI: skip Cinder HA precheck for zun scenario d2331b1c6 Fix hyperlink syntax in release notes ce4ff5a0b CI: Use debian/ubuntu mirrored images on build 22bfa3827 Fix external ceph cinder keyring 6986343ed update openstack_previous_release_name var to 2024.1 e39c325fd CI: Use libpod/registry for registry 74be26925 cli: Add check=True to catch Ansible failures 95166909e Add removal of --key parameter to CLI rewrite note 6c2d911fd Fix Octavia cert generation Diffstat (except docs and test files) ------------------------------------- ansible/group_vars/all.yml | 2 +- ansible/roles/nova-cell/tasks/external_ceph.yml | 2 +- kolla_ansible/cli/commands.py | 3 ++- kolla_ansible/utils.py | 4 ++-- ...de-exporter-targets-extra-c037d4755d1002e8.yaml | 6 +++--- .../external-ceph-cinder_key-1a4c38fff3e2ab3c.yaml | 10 ++++++++++ .../notes/python-cli-3e568065b8706e73.yaml | 22 +++++++++++----------- ...cert-copy-without-haproxy-85d45834469aa9e8.yaml | 6 +++--- 12 files changed, 45 insertions(+), 25 deletions(-)

1 0

kayobe 15.6.0 (bobcat)
by no-reply＠openstack.org 05 Dec '24

05 Dec '24

We are overjoyed to announce the release of: kayobe 15.6.0 This release is part of the bobcat release series. The source is available from: https://opendev.org/openstack/kayobe Download the package from: https://tarballs.openstack.org/kayobe/ Please report issues through: https://storyboard.openstack.org/#!/project/openstack/kayobe For more details, please see below. 15.6.0 ^^^^^^ New Features ************ * Adds the internal VIP to the NOPROXY/noproxy environment variables. * Adds support for using Cumulus switches (NCLU and NVUE) with Networking Generic Switch. Security Issues *************** * When running API requests from a host configured with kayobe, traffic destined for the internal VIP is sent via the default proxy. This can be a security issue if not using TLS as the proxy will be able to intercept the traffic. If using an untrusted proxy, with TLS disabled on the internal VIP, it is recommended that you run "kayobe overcloud host configure -t proxy", "kayobe seed hypervisor host configure -t proxy", "kayobe seed host configure -t proxy", and "kayobe infra vm host configure -t proxy", to add the internal VIP to the no proxy configuration. This is considered a minor issue as traffic between containers will not use the proxy by default. LP#2087556 Bug Fixes ********* * The "proxysql" image is now built when "kolla_enable_proxysql" is set to "true". * Pin requirements for IPA image build to ensure that the "ironic- lib" version matches "ironic-python-agent". LP#2089263 <https://bugs.launchpad.net/kayobe/+bug/2089263>`__ * Changes the default cloud image for seed and infra VMs to use Rocky Linux 9.3 when using "bios" boot mode, to fix boot failures with newer cloud images. When deploying new VMs, it is recommended to set "infra_vm_boot_firmware" and "seed_vm_boot_firmware" to "efi". Changes in kayobe 15.5.0..15.6.0 -------------------------------- 40779aa4 CI: use quay.io/podman/hello due too dockerhub rate limits fb5856cd Ensure ironic-python-agent matches ironic-lib 715b4b93 Add internal VIP address to no_proxy 14259a03 CI: Replace deprecated distro.linux_distribution 9629a40e Add support for building the proxysql image e2f0f4a8 Adds support for using Cumulus switches with NGS 09063d14 Use Rocky Linux 9.3 images unless in efi boot mode Diffstat (except docs and test files) ------------------------------------- ansible/inventory/group_vars/all/infra-vms | 14 ++++++++++---- ansible/inventory/group_vars/all/ipa | 1 + ansible/inventory/group_vars/all/kolla | 3 +++ ansible/inventory/group_vars/all/proxy | 1 + ansible/inventory/group_vars/all/seed-vm | 12 +++++++++--- ansible/kolla-openstack.yml | 2 ++ .../configuration/reference/ironic-python-agent.rst | 17 ++++++++--------- etc/kayobe/infra-vms.yml | 10 ++++++---- etc/kayobe/proxy.yml | 5 +++-- etc/kayobe/seed-vm.yml | 8 +++++--- .../adds-internal-vip-to-no-proxy-cbb4db4ea3909185.yaml | 17 +++++++++++++++++ .../notes/build-proxysql-image-ec09332ef0b7dae0.yaml | 5 +++++ .../notes/cumulus-support-ngs-c4a6e6f3d45f5783.yaml | 5 +++++ .../notes/pin-ipa-requirements-f9566011b2400e6c.yaml | 6 ++++++ ...pin-rl9-vm-image-bios-firmware-b025ac853f68a91b.yaml | 7 +++++++ 16 files changed, 92 insertions(+), 29 deletions(-)

1 0

kolla 18.3.0 (caracal)
by no-reply＠openstack.org 05 Dec '24

05 Dec '24

We are overjoyed to announce the release of: kolla 18.3.0 This release is part of the caracal release series. The source is available from: https://opendev.org/openstack/kolla Download the package from: https://tarballs.openstack.org/kolla/ Please report issues through: https://bugs.launchpad.net/kolla/+bugs For more details, please see below. 18.3.0 ^^^^^^ Upgrade Notes ************* * "Erlang" RPMs on "aarch64" architecture are now installed from a new location - OpenStack Kolla's COPR (https://copr.fedorainfracloud.org/coprs/g/openstack-kolla/rabbitmq- erlang/) compared to Hrw's COPR (https://copr.fedorainfracloud.org/coprs/hrw/erlang-for-rabbitmq/) * RabbitMQ and Erlang packages are now all installed from the Cloudsmith "rabbitmq.com" mirrors since the RabbitMQ "packagecloud.io" is getting shut down August 18st, 2024: https://www.rabbitmq.com/blog/2024/08/11/package-repository-updates #packagecloud-will-be-discontinued-on-aug-18th-2024 Bug Fixes ********* * Fixes the inconsistency issue between config.json and real state in the container. LP#2060855 * Fixes MariaDB backup failure when ProxySQL is used LP#2080818 * Fixes missing tpm user for nova-compute and nova-libvirt containers by adding tpm2-tools package to Ubuntu/Debian nova containers. LP#2067050 * Fixed ironic-conductor missing packages genisoimage and syslinux/isolinux. Changes in kolla 18.2.0..18.3.0 ------------------------------- 0a8d76e86 CI: Use debian/ubuntu images from quay mirror 68e96e72f Add way to backup from MariaDB replica server 648be98c9 Fix handling configs in base image af464eeb3 Fix missing tss user in Ubuntu/Debian nova containers 97a6d193b aarch64: Exclude syslinux from ironic conductor packages 4537f2b53 aarch64: fix name of rabbitmq copr repo 9a0914d10 erlang/aarch64: Move to openstack-kolla owned COPR d9639f05c Revert "Pin OpenSearch Dashboards to 2.15" abf7a4cf8 Add missing iso packages to ironic-conductor b9584882e Fix cinder-backup: add missing sysfsutils,lsscsi package 6f63211cf rabbitmq: Switch to Cloudsmith mirrors a58a7f88d Pin OpenSearch Dashboards to 2.15 Diffstat (except docs and test files) ------------------------------------- kolla/template/repos.yaml | 12 +- .../notes/bug-2060855-77516da722d04761.yaml | 6 + .../notes/bug-2080818-9eacce36a8c18f8f.yaml | 5 + releasenotes/notes/copr-move-5d0464c50dc85ccf.yaml | 6 + .../notes/fix_nova_tpm_user-98f56190196a00d2.yaml | 6 + .../notes/ironic-packages-009b388b10fab6f0.yaml | 4 + ...migrate-from-packagecloud-59d7e9e0a10e1da0.yaml | 7 + 23 files changed, 849 insertions(+), 37 deletions(-)

1 0

kolla 19.1.0 (dalmatian)
by no-reply＠openstack.org 05 Dec '24

05 Dec '24

We are gleeful to announce the release of: kolla 19.1.0 This release is part of the dalmatian release series. The source is available from: https://opendev.org/openstack/kolla Download the package from: https://tarballs.openstack.org/kolla/ Please report issues through: https://bugs.launchpad.net/kolla/+bugs For more details, please see below. 19.1.0 ^^^^^^ Bug Fixes * Fixes the inconsistency issue between config.json and real state in the container. LP#2060855 Changes in kolla 19.0.0..19.1.0 ------------------------------- 890568ba9 CI: Use debian/ubuntu images from quay mirror e49ba16fc Fix handling configs in base image Diffstat (except docs and test files) ------------------------------------- .../notes/bug-2060855-77516da722d04761.yaml | 6 + 4 files changed, 626 insertions(+)

1 0

kolla-ansible 17.6.0 (bobcat)
by no-reply＠openstack.org 05 Dec '24

05 Dec '24

We are jazzed to announce the release of: kolla-ansible 17.6.0 This release is part of the bobcat release series. The source is available from: https://opendev.org/openstack/kolla-ansible Download the package from: https://tarballs.openstack.org/kolla-ansible/ Please report issues through: https://bugs.launchpad.net/kolla-ansible/+bugs For more details, please see below. 17.6.0 ^^^^^^ New Features ************ * Adds the ability to provide the NTP (time source) server for multiple DHCP ranges in the Ironic Inspector DHCP server. * Added a command to upgrade to a target version of RabbitMQ. This is required before a SLURP upgrade. See the docs for more details: https://docs.openstack.org/kolla-ansible/latest/reference/message- queues/rabbitmq.html#slurp Upgrade Notes ************* * Support for failing execution early if fact collection fails on any of the hosts by setting "kolla_ansible_setup_any_errors_fatal" to "true" has been removed. This is due to Ansible's "any_errors_fatal" parameter not being templated, resulting in the value always being interpreted as "true", even though the default value of "kolla_ansible_setup_any_errors_fatal" is "false". Equivalent behaviour is possible by setting the maximum failure percentage to 0. This may be done specifically for fact gathering using "gather_facts_max_fail_percentage" or globally using "kolla_max_fail_percentage". Bug Fixes ********* * Fixes an issue with ironic dnsmasq failing to start in deployments using podman because it requires the NET_RAW capability. See LP#2055282. * Fixes keystone service configuration for haproxy when using federation. LP#2058656 * Fixes mariadb's backup failure due to missing *CREATE* privileges on the *mariadb_backup_history* table. LP#2061889 * Fixes the MariaDB recovery issue when kolla-ansible is running from a docker container. LP#2073370 * Fix ProxySQL unable to bind due to incorrect format of IPv6 addresses in the *mysql_ifaces* configuration. LP#2081106 * Fixes an issue during fact gathering when using the "--limit" argument where a host that fails to gather facts could cause another host to fail during delegated fact gathering. * Add "skip_kpartx yes" to multipath.conf "defaults" section to prevent kpartx scanning multipath devices and unlock "multipathd del map" operation of os-brick for volume detaching oprtaions. *LP#2078973 <https://launchpad.net/bugs/2078973>`__* * Fixes 2067036. Added "octavia_interface_wait_timeout" to control octavia-interface.service timeout to be able wait openvswitch agent sync has been finished and octavia-lb-net is reachable from the host. Also set restart policy for this unit to on-failure LP#2067036 * Fixes Octavia service upgrade issue where it can fail when Octavia persistence database user is missing. LP#2065591 * Fixes unreliable health checks for neutron_ovn_agent and neutron_ovn_metadata_agent bug. Changed to check OVS DB connection instead of OVN southbound DB connection. LP#2084128 * Fixes an issue, when using podman, with named volumes that use a mode specifier. See LP#2054834 (https://bugs.launchpad.net/kolla- ansible/+bug/2054834) for more details. * Fixes parsing of JSON output of inner modules called by "kolla- toolbox" when data was returned on standard error. LP#2080544 Changes in kolla-ansible 17.5.0..17.6.0 --------------------------------------- f98d3d83d CI: Use debian/ubuntu mirrored images on build c8f81f122 Fix IPv6 address format in ProxySQL configuration 13427c2ee CI: Use libpod/registry for registry 8fff0b68e Change from PERCONA_SCHEMA to mysql for mariabackup a32676b06 Fix mariadb backup unable to create history table 74fdbecf1 Fix Octavia service upgrade failure from 2023.1 56ccf0119 Fix health checks for neutron_ovn_agent and neutron_ovn_metadata_agent 5dcfa09eb Add configuration for NTP server in Ironic Inspector DHCP server 8d52404ac Fixing typo in etc/kolla/globals.yml d83142fc1 Fix octavia-interface timeout bb8289fdf Be clear that rabbitmq-upgrade is not idempotent 1e3c16743 Docs: point to RMQ SLURP handing in upgrade guide 7b8944688 Fix typo in RabbitMQ versions pinning 6a4328d64 Fix os-brick multipathd del map fails for SAN multipath devices 37e9b4abc Add NET_RAW to dnsmasq container e0cc7aba1 systemd: Add Wants=docker.service for docker 20eaafccd Separate outputs of kolla_toolbox inner module bd6ccf841 Revert "Allow setting any_errors_fatal true for gather-facts" 4c4ca0d66 Fix links in docs for unmaintained releases 0a28b9469 CI: improve get_logs.sh fe27c9744 Add command to upgrade to a target version of RMQ 5863402e8 Avoid unnecessary secondary fact gathering failure d9efcbf08 fact gathering: Group hosts before gathering facts 33d8f0c1a fact gathering: Remove gathering of package facts 1350b5cfa Fix keystone configuration for haproxy. 817b14d10 Fix mariadb recovery a29656b76 Support mode in named volumes when using podman Diffstat (except docs and test files) ------------------------------------- ansible/gather-facts.yml | 35 +++++----------- ansible/group_vars/all.yml | 8 ---- ansible/library/kolla_toolbox.py | 4 +- ansible/module_utils/kolla_podman_worker.py | 8 +++- ansible/module_utils/kolla_systemd_worker.py | 1 + ansible/rabbitmq-upgrade.yml | 21 ++++++++++ ansible/roles/ironic/defaults/main.yml | 1 + .../roles/ironic/templates/ironic-dnsmasq.conf.j2 | 5 +-- ansible/roles/keystone/defaults/main.yml | 6 ++- .../templates/proxysql/proxysql.yaml.j2 | 4 +- ansible/roles/mariadb/defaults/main.yml | 2 +- ansible/roles/mariadb/tasks/recover_cluster.yml | 3 ++ ansible/roles/mariadb/tasks/register.yml | 17 +------- .../roles/multipathd/templates/multipath.conf.j2 | 1 + ansible/roles/neutron/defaults/main.yml | 4 +- ansible/roles/octavia/tasks/upgrade.yml | 37 +++++++++++++++++ .../octavia/templates/octavia-interface.service.j2 | 4 ++ ansible/roles/rabbitmq/defaults/main.yml | 2 + etc/kolla/globals.yml | 10 +---- ...ability-to-ironic-dnsmasq-40f5894c5180b12d.yaml | 6 +++ .../notes/bug-2058656-ad68bb260327a267.yaml | 5 +++ .../notes/bug-2061889-f54e356f43c0fae3.yaml | 6 +++ .../notes/bug-2073370-268e9a76be9f2ae9.yaml | 5 +++ .../notes/bug-2081106-ef0df790780c612d.yaml | 6 +++ ...-gathering-double-failure-4662ef2f54d58291.yaml | 6 +++ ...multipathd-kpartx-disable-44732c1378ae2291.yaml | 7 ++++ ...octavia-interface-timeout-5e87ea2501d5ab3c.yaml | 10 +++++ ...x-octavia-service-upgrade-9610e35cfdd512f6.yaml | 6 +++ .../notes/fix_ovn_agents_hc-f6e4a39b9d64e9f1.yaml | 8 ++++ ...me-issues-when-using-mode-36b9862321eb9e68.yaml | 6 +++ ...ector-multiple-ranges-ntp-32568dcf640a7fc1.yaml | 5 +++ .../kolla-toolbox-demux-c5e8d27bc7214069.yaml | 6 +++ ...mq-target-upgrade-command-d5f9d9fc27fa28f8.yaml | 6 +++ .../remove-any-errors-fatal-664fc2207074f0ef.yaml | 14 +++++++ tools/kolla-ansible | 8 ++++ 43 files changed, 332 insertions(+), 93 deletions(-)

1 0

kayobe 16.3.0 (caracal)
by no-reply＠openstack.org 05 Dec '24

05 Dec '24

We are gleeful to announce the release of: kayobe 16.3.0 This release is part of the caracal release series. The source is available from: https://opendev.org/openstack/kayobe Download the package from: https://tarballs.openstack.org/kayobe/ Please report issues through: https://bugs.launchpad.net/kayobe/+bugs For more details, please see below. 16.3.0 ^^^^^^ New Features ************ * Adds the internal VIP to the NOPROXY/noproxy environment variables. * Adds support for using Cumulus switches (NCLU and NVUE) with Networking Generic Switch. Upgrade Notes ************* * Bumps the "stackhpc.linux" collection to 1.3.0. Note this version uses systemd to activate virtual functions. This change is restricted to the "stackhpc.linux.sriov" role, which is not used by Kayobe. If a custom playbook uses this role, you can retain existing behaviour by setting "sriov_numvfs_driver" to "udev". Security Issues *************** * When running API requests from a host configured with kayobe, traffic destined for the internal VIP is sent via the default proxy. This can be a security issue if not using TLS as the proxy will be able to intercept the traffic. If using an untrusted proxy, with TLS disabled on the internal VIP, it is recommended that you run "kayobe overcloud host configure -t proxy", "kayobe seed hypervisor host configure -t proxy", "kayobe seed host configure -t proxy", and "kayobe infra vm host configure -t proxy", to add the internal VIP to the no proxy configuration. This is considered a minor issue as traffic between containers will not use the proxy by default. LP#2087556 Bug Fixes ********* * Fixes IPA and host image build failures when Git was not installed on the build host. LP#2058922 * The "proxysql" image is now built when "kolla_enable_proxysql" is set to "true". * Updates the group and mode set on the "/var/log/journal" directory to match default ownership and permissions used by "systemd- journald". LP#2083494 * Fixes generation of kernel parameters when the GRUB_CMDLINE_LINUX_DEFAULT variable is absent from "/etc/default/grub". LP#2083874. * Pin requirements for IPA image build to ensure that the "ironic- lib" version matches "ironic-python-agent". LP#2089263 <https://bugs.launchpad.net/kayobe/+bug/2089263>`__ * Changes the default cloud image for seed and infra VMs to use Rocky Linux 9.3 when using "bios" boot mode, to fix boot failures with newer cloud images. When deploying new VMs, it is recommended to set "infra_vm_boot_firmware" and "seed_vm_boot_firmware" to "efi". * Fixes an issue when using overcloud Ironic with a shared Ansible control host. The use of a shared cache directory could lead to a failure to download Ironic Python Agent (IPA) images. LP#2069845 Changes in kayobe 16.2.0..16.3.0 -------------------------------- 1ed7724d CI: use quay.io/podman/hello due too dockerhub rate limits b5719257 Ensure ironic-python-agent matches ironic-lib 4e07e042 Add internal VIP address to no_proxy f6992fdd CI: Replace deprecated distro.linux_distribution 3c1ff0c3 CI: Fix Ubuntu 24.04 version check 77c1ad12 Add support for building the proxysql image dec71144 CI: Skip test_ntp_clock_synchronized on Ubuntu 24.04 bd47742c Fix group and mode of /var/log/journal b3c03627 Bump stackhpc.openstack collection to 0.2.2 27845067 Bump stackhpc.linux to v1.3.0 6720a227 Adds support for using Cumulus switches with NGS d888e881 CI: rework RabbitMQ handling in upgrades c0cf61db Remove duplicate description of filename key 324da76e Avoid shared IPA image cache on Ansible control host 5274c4e6 Use Rocky Linux 9.3 images unless in efi boot mode Diffstat (except docs and test files) ------------------------------------- ansible/inventory/group_vars/all/infra-vms | 14 +++++--- ansible/inventory/group_vars/all/ipa | 1 + ansible/inventory/group_vars/all/kolla | 3 ++ ansible/inventory/group_vars/all/proxy | 1 + ansible/inventory/group_vars/all/seed-vm | 12 +++++-- ansible/kolla-openstack.yml | 40 ++++------------------ ansible/logging.yml | 4 +-- ansible/roles/image-download/defaults/main.yml | 4 +++ ansible/roles/image-download/tasks/main.yml | 40 ++++++++++++++-------- ansible/roles/kolla-openstack/defaults/main.yml | 5 +++ ansible/roles/kolla-openstack/tasks/config.yml | 1 + dev/functions | 24 ------------- .../reference/ironic-python-agent.rst | 17 +++++---- etc/kayobe/apt.yml | 2 -- etc/kayobe/infra-vms.yml | 10 +++--- etc/kayobe/proxy.yml | 5 +-- etc/kayobe/seed-vm.yml | 8 +++-- playbooks/kayobe-overcloud-upgrade-base/run.yml | 20 +++++++++++ ...-internal-vip-to-no-proxy-cbb4db4ea3909185.yaml | 17 +++++++++ .../notes/bug-2058922-c16426f013ddf3ca.yaml | 5 +++ .../build-proxysql-image-ec09332ef0b7dae0.yaml | 5 +++ ...bump-stackhpc-linux-1.3.0-892bc5ae7574508b.yaml | 9 +++++ .../cumulus-support-ngs-c4a6e6f3d45f5783.yaml | 5 +++ ...ar-log-journal-group-mode-3e7c4c822d050c8f.yaml | 6 ++++ ...rub-cmdline-linux-default-f4079def0b1357e7.yaml | 6 ++++ .../pin-ipa-requirements-f9566011b2400e6c.yaml | 6 ++++ ...l9-vm-image-bios-firmware-b025ac853f68a91b.yaml | 7 ++++ .../remove-local-ipa-cache-1fe125360f5d3385.yaml | 7 ++++ requirements.yml | 4 +-- 30 files changed, 199 insertions(+), 106 deletions(-)

1 0

kolla 17.6.0 (bobcat)
by no-reply＠openstack.org 05 Dec '24

05 Dec '24

We are jazzed to announce the release of: kolla 17.6.0 This release is part of the bobcat release series. The source is available from: https://opendev.org/openstack/kolla Download the package from: https://tarballs.openstack.org/kolla/ Please report issues through: https://bugs.launchpad.net/kolla/+bugs For more details, please see below. 17.6.0 ^^^^^^ Upgrade Notes ************* * "Erlang" RPMs on "aarch64" architecture are now installed from a new location - OpenStack Kolla's COPR (https://copr.fedorainfracloud.org/coprs/g/openstack-kolla/rabbitmq- erlang/) compared to Hrw's COPR (https://copr.fedorainfracloud.org/coprs/hrw/erlang-for-rabbitmq/) * RabbitMQ and Erlang packages are now all installed from the Cloudsmith "rabbitmq.com" mirrors since the RabbitMQ "packagecloud.io" is getting shut down August 18st, 2024: https://www.rabbitmq.com/blog/2024/08/11/package-repository-updates #packagecloud-will-be-discontinued-on-aug-18th-2024 Bug Fixes ********* * Fixes the inconsistency issue between config.json and real state in the container. LP#2060855 * Fixes incompatibility between "ansible.posix" 1.6.0 and "ansible- core" versions below 2.15 by capping "ansible.posix" to 1.5.x. LP#2080609 * Fixes missing tpm user for nova-compute and nova-libvirt containers by adding tpm2-tools package to Ubuntu/Debian nova containers. LP#2067050 * Fixed ironic-conductor missing packages genisoimage and syslinux/isolinux. Changes in kolla 17.5.0..17.6.0 ------------------------------- 96bf08833 CI: Use debian/ubuntu images from quay mirror b3b7db854 Fix handling configs in base image 5a2189c4e Fix missing tss user in Ubuntu/Debian nova containers fda0d0c3c aarch64: Exclude syslinux from ironic conductor packages c913df4be aarch64: fix name of rabbitmq copr repo 56e773e5c erlang/aarch64: Move to openstack-kolla owned COPR 10291ab3e Revert "Pin OpenSearch Dashboards to 2.15" 7b1fc549f Add missing iso packages to ironic-conductor daa559448 Fix cinder-backup: add missing sysfsutils,lsscsi package 73051ccde rabbitmq: Switch to Cloudsmith mirrors c1cbbd0b2 Cap ansible.posix below 1.6.0 9dc0371b5 Pin OpenSearch Dashboards to 2.15 Diffstat (except docs and test files) ------------------------------------- kolla/template/repos.yaml | 12 +- .../notes/bug-2060855-77516da722d04761.yaml | 6 + .../notes/bug-2080609-51f216ad1ba47d20.yaml | 6 + releasenotes/notes/copr-move-5d0464c50dc85ccf.yaml | 6 + .../notes/fix_nova_tpm_user-98f56190196a00d2.yaml | 6 + .../notes/ironic-packages-009b388b10fab6f0.yaml | 4 + ...migrate-from-packagecloud-59d7e9e0a10e1da0.yaml | 7 + 22 files changed, 713 insertions(+), 37 deletions(-)

1 0

openstack-ansible 30.0.0 (dalmatian)
by no-reply＠openstack.org 05 Dec '24

05 Dec '24

We exuberantly announce the release of: openstack-ansible 30.0.0 This release is part of the dalmatian release series. The source is available from: https://opendev.org/openstack/openstack-ansible Download the package from: https://tarballs.openstack.org/openstack-ansible/ Please report issues through: https://bugs.launchpad.net/openstack-ansible/+bugs For more details, please see below. 30.0.0 ^^^^^^ Prelude ******* Behavior of "rabbitmq_upgrade" variable has changed. It no longer can be used to reset the cluster state. It now acts solely as a flag to perform a rolling-upgrade of the existing cluster. New Features ************ * Added a variable "rabbitmq_erlang_package_version" that can be used to define an erlang version being used when "external_repo" is used as package source. * The neutron firewall-as-a-servie dashboard will be automatically deployed if the FWaaS service is enabled. FWaaS is now an active deliverable again fron the Neutron project. * RabbitMQ version is upgraded to a new major version 4.0 Upgrade Notes ************* * uWSGI has been re-enabled by default for Neutron one more time. With that new services are introduced which should ensure adequate functionality of Neutron when uWSGI is being used. * "neutron-periodic-workers" service is enabled for all drivers when WSGI is being used. It runs along with previously existing "neutron-rpc-server" * "neutron-ovn-maintenance-worker" service is added only if *ml2.ovn* is being used as "neutron_plugin_type". The service will be enabled and running only when WSGI is used for Neutron "neutron_use_uwsgi" is set to *True* * If you are using Ubuntu 22.04 Jammy Jellyfish and "install_method: distro" please make sure to disable "neutron_use_uwsgi" as required binaries for this mode to work are missing from packages for this distro. * Please, make sure you are running RabbitMQ version of 3.13 before proceeding with the upgrade. In case you RabbitMQ version is lower then 3.13 upgrade to 4.0 will fail. You can run upgrade to 3.13 with same version of role by supplying variable "rabbitmq_package_version" during runtime, for example: "openstack- ansible openstack.osa.rabbitmq_server -e rabbitmq_upgrade=true -e rabbitmq_package_version=3.13.7-1" and then re-running upgrade normally to 4.0. Deprecation Notes ***************** * Following deprecated variables were removed and have no effect: * *cinder_service_v2_name* * *cinder_service_v2_port* * *cinder_service_v2_proto* * *cinder_service_v2_type* * *cinder_service_v2_description* * *cinder_service_v2_publicuri* * *cinder_service_v2_publicurl* * *cinder_service_v2_adminuri* * *cinder_service_v2_adminurl* * *cinder_service_v2_internaluri* * *cinder_service_v2_internalurl* * Following variables were deprecated and removed in favor of their analogues * *cinder_service_description* -> *cinder_service_v3_description* * *cinder_service_publicuri_proto* -> *cinder_service_v3_publicuri_proto* * *cinder_service_adminuri_proto* -> *cinder_service_v3_adminuri_proto* * *cinder_service_internaluri_proto* -> *cinder_service_v3_internaluri_proto* * *cinder_service_type* -> *cinder_service_v3_type* * *cinder_service_publicuri* -> *cinder_service_v3_publicurl* * *cinder_service_adminuri* -> *cinder_service_v3_adminurl* * *cinder_service_internaluri* -> *cinder_service_v3_internalurl* * *cinder_service_v3_port* -> *cinder_service_port* * *cinder_service_v3_proto* -> *cinder_service_proto* * Variable "rabbitmq_erlang_version_spec" has been deprecated and does not have any effect anymore. Please, use "rabbitmq_erlang_package_version" instead. * Variable "haproxy_tls_vip_binds" has been renamed to "haproxy_vip_binds" to better reflect variable purpose. Old variable name is still respected but it's usage is descouraged and old naming will be removed in the future. Bug Fixes ********* * The format of kernel and ramdisk images for Ironic is now raw in order to conform to upstream expectations. See https://bugs.launchpad.net/ironic/+bug/2074090 * Issues with uWSGI mode for Neutron has been addressed and uWSGI be used for the service. Other Notes *********** * Supplying "rabbitmq_upgrade=true" no longer re-initialize cluster and will perform regular rolling upgrade of the RabbitMQ cluster. Changes in openstack-ansible 29.0.0.0rc1..30.0.0 ------------------------------------------------ 7c3639cf0 [doc] Doc index page to contain only release-specific data d51c8dbed Switch plugins repo to 2024.2 branch 37aadd383 Update TOX_CONSTRAINTS_FILE for stable/2024.2 94b78b37a Update .gitreview for stable/2024.2 1abf903e4 Produce 2024.2 RC1 for OpenStack-Ansible 17eccd5c8 Add fwaas to neutron source_git file ef192b73d Add neutron fwaas and vpnaas git and zuul repo definitions 44ad51c2b Update step-ca version ea01c7e60 Retire murano/senlin/sahara 1a6da4268 Switch Ubuntu distro jobs to 24.04 3486f2dbf Move healthcheck playbooks to the collection 742d933dc Replace usage of mirrorlist with an official Rocky mirror 73fdd751f [doc] Document requirement for RabbitMQ upgrade 8964d4319 Fix encoded url bypass edae05a8a Add variables to control HSTS records 7603b5314 Deny access to any paths including /. for console proxies. 87cf8b64c Use mariadb-admin instead of mysqladmin fb7de5866 Remove usage of mariadb.com infra mirror 59a149ba4 Move all ancilliary zuul jobs to ubuntu noble ce98ae273 Remove HA queues defenition 71dd03dd8 Unfreeze roles after milestone release 80e6a1a44 Reference keepalived scripts through integrated repo path 4115c6ac2 [reno] Add a release note for haproxy_limit_hosts key implementation aecaefa15 Freeze roles for 30.0.0.0b1 release 0461ec98c Add autocomplete script for playbooks a18973964 Ensure that the inventory tox job runs on an ubuntu-jammy node 3c9465d19 Bump ansible version to 2.17.5 700e59186 Fix upgrade job on master to upgrade from 2024.1 to master 71bc8edf8 Update docs for playbooks collectification 394c840dc Move OpenStack playbooks to collection e1e1b861b Bump SHAs and pinned versions 08a722730 Add Ceph test for Rocky Linux 367fe8eb8 Convert Skyline HAProxy httpcheck 59ec4725d Increase MPM thread limits for Apache d70218855 Use node FQDN for nova-restore-compute-id e16d741a7 Add global release note for Apache MPM alignment ce0c26bd8 Use mariadb client instead of mysql for healthcheck 09d805bc2 Use hosts setup playbooks from openstack-ansible-plugins repo ff7b294b9 Use infrastructure playbooks from openstack-ansible-plugins repo 50f16d1e1 Remove ceph-server common tasks 1b470d16c [doc] Add support for Ubuntu 24.04 to docs 1c5e45648 Test on Ubuntu Noble 62d53b971 Add Ubuntu Noble to the list of supported LXC operating systems a9a8718b7 Verify OS for containers installation e175b4aa6 Use haproxy_install playbook from openstack-ansible-plugins repo af8adb377 Remove extra slash character from horizon haproxy healthcheck url. a0714bf9a Simplify handling of 'telemetry' scenario in CI tests e1964865e Do not install Skyline with os-infra_hosts 120c942fd Enchance reference_group logic for inventory 055e69eef [doc] Add documentation on spawning HAProxy inside LXC e97192fc3 Bump SHAs for master f55df9f33 Use the 'generated' apparmor profile for all containers ad73fda3b Permit Ubuntu Noble for deploy host and targets in requirements checks b30628cd4 Remove the get_md5 parameter from ansible stat tasks fc558a06f Use unbound_clients role from plugins collection efbea346b Delete glusterd data along with container data 0053e7c38 Properly apply `always` tag to install_defaults 8147225bd Rename Container Network to Management cdcb7240f [doc] Fix Typo 099ac08a9 Skip repo verification for distro install c5fbcbfbb Rename haproxy_hosts to load_balancer_hosts 0877eaf8a Skip importing haproxy_service_config with no haproxy hosts dec6ed220 Properly apply `always` tag to haproxy_endpoint_manage 6f32d3562 Update ssh service name for modern debian based systems. 64fb3b0b9 Improve regex matching for infra_lxc_validate job fec9108ed Update repo server service user ae0450b26 Remove incorrect ' releasenotes' directory 9eea5ec38 reno: Update master for unmaintained/zed 827a7e340 Use haproxy_endpoint_manage role from osa collection rather than common-tasks eccd6c50e Remove dynamic-grouping common task file 4c40bcb9d Remove remove_container_journal common task file 792f1c6a4 Use openstack.osa.install_defaults role instead of vars_files 18cb6d1ea Bump ansible collection versions d21b0fbbc Collect letsencrypt logs 87a051e24 Collect step-ca logs 47c57267e Use UCA mirror in CI for ubuntu 120d6be99 Switch to ceph-ansible stable-8.0 9a37e1fd0 Use gather_extra_facts role from plugins collection 5bb361685 [doc] Add Code Review policies to contributor documentation d8097f08c [doc] Update role maturity matrix a1eca36d9 Update SHAs for master 4d1ce1b31 Use dynamic_address_fact role from plugins collection df8f3af39 Remove os-log-dir-setup common playbook fbc66e909 Add nfs server exports file to log collection 348f776bd Remove use of deprecated ANSIBLE_COLLECTIONS_PATHS 736d43270 Update pip/wheel/setuptools/uwsgi versions to latest 808301144 Update ansible to 2.17.1 a9ec85685 [doc] Override pdf filename for the deploy guide c8c33b211 Collect iscsid config for CI jobs a769a7356 Grammar and OS corrections a6c488c82 Revert "Enable oslomsg_rabbit_queue_manager by default" 6254dff44 Ensure link to PDF appears for deploy guide 7808a2c0b Drop support for Debian 11 (bullseye) 73cdcc65b Switch services SHAs to track master 4e6c09fbe Start 2024.2 (Dalmatian) development 31e2e91a3 Update master for stable/2024.1 1285a5ab9 [doc] Remove empty pages around ToC in PDF 30b43800c [doc] Properly promote deploy guide Diffstat (except docs and test files) ------------------------------------- .gitreview | 2 +- ansible-collection-requirements.yml | 16 +- ansible-role-requirements.yml | 320 ++++++------- deploy-guide/source/conf.py | 6 +- deploy-guide/source/deploymenthost.rst | 2 +- deploy-guide/source/index.rst | 6 +- deploy-guide/source/overview-requirements.rst | 7 +- deploy-guide/source/run-playbooks.rst | 26 +- deploy-guide/source/targethosts-prepare.rst | 2 +- .../admin/maintenance-tasks/rabbitmq-maintain.rst | 4 +- .../admin/upgrades/distribution-upgrades.rst | 34 +- .../admin/upgrades/os-compatibility-matrix.html | 32 +- .../inventory/understanding-inventory.rst | 2 +- etc/openstack_deploy/conf.d/haproxy.yml.aio | 2 +- etc/openstack_deploy/conf.d/haproxy.yml.example | 2 +- etc/openstack_deploy/openstack_user_config.yml.aio | 2 +- .../openstack_user_config.yml.example | 8 +- .../openstack_user_config.yml.multibond.example | 2 +- .../openstack_user_config.yml.pod.example | 2 +- .../openstack_user_config.yml.prod-ceph.example | 2 +- .../openstack_user_config.yml.prod.example | 2 +- ...openstack_user_config.yml.provnet-group.example | 2 +- .../openstack_user_config.yml.singlebond.example | 2 +- .../openstack_user_config.yml.test.example | 2 +- global-requirement-pins.txt | 8 +- inventory/env.d/haproxy.yml | 7 + inventory/env.d/skyline.yml | 1 - inventory/group_vars/adjutant_all/source_git.yml | 6 +- inventory/group_vars/all/all.yml | 2 +- inventory/group_vars/all/infra.yml | 8 +- inventory/group_vars/all/oslo-messaging.yml | 3 + inventory/group_vars/all/source_git.yml | 6 +- inventory/group_vars/all_containers.yml | 5 - inventory/group_vars/aodh_all/source_git.yml | 6 +- inventory/group_vars/barbican_all/source_git.yml | 6 +- inventory/group_vars/blazar_all/source_git.yml | 10 +- inventory/group_vars/ceilometer_all/source_git.yml | 6 +- inventory/group_vars/ceph-rgw.yml | 3 +- inventory/group_vars/ceph_all.yml | 30 ++ inventory/group_vars/cinder_all/source_git.yml | 6 +- inventory/group_vars/cloudkitty_all/source_git.yml | 6 +- inventory/group_vars/designate_all/source_git.yml | 6 +- inventory/group_vars/glance_all/source_git.yml | 6 +- inventory/group_vars/gnocchi_all/source_git.yml | 4 +- inventory/group_vars/haproxy/haproxy.yml | 17 +- inventory/group_vars/haproxy/keepalived.yml | 6 +- inventory/group_vars/heat_all/source_git.yml | 6 +- .../group_vars/horizon_all/haproxy_service.yml | 2 +- inventory/group_vars/horizon_all/source_git.yml | 62 +-- inventory/group_vars/ironic_all/source_git.yml | 10 +- inventory/group_vars/keystone_all/source_git.yml | 6 +- inventory/group_vars/magnum_all/source_git.yml | 6 +- inventory/group_vars/manila_all/source_git.yml | 6 +- inventory/group_vars/masakari_all/source_git.yml | 10 +- inventory/group_vars/mistral_all/source_git.yml | 10 +- inventory/group_vars/neutron_all/source_git.yml | 40 +- inventory/group_vars/nova_all/haproxy_service.yml | 6 + inventory/group_vars/nova_all/source_git.yml | 8 +- inventory/group_vars/octavia_all/source_git.yml | 10 +- inventory/group_vars/placement_all/source_git.yml | 6 +- .../group_vars/skyline_all/haproxy_service.yml | 4 +- inventory/group_vars/skyline_all/source_git.yml | 8 +- inventory/group_vars/swift_all/source_git.yml | 6 +- inventory/group_vars/tacker_all/source_git.yml | 6 +- inventory/group_vars/trove_all/source_git.yml | 6 +- inventory/group_vars/utility_all/source_git.yml | 44 +- inventory/group_vars/zun_all/source_git.yml | 14 +- osa_toolkit/generate.py | 18 +- playbooks/ceph-install.yml | 217 +-------- playbooks/ceph-nfs-install.yml | 53 +-- .../gather-hardware-facts.yml => ceph-pools.yml} | 8 +- playbooks/ceph-rgw-install.yml | 82 +--- playbooks/ceph-rgw-keystone-setup.yml | 97 +--- playbooks/certificate-authority.yml | 17 +- playbooks/certificate-generate.yml | 20 +- playbooks/certificate-ssh-authority.yml | 18 +- playbooks/common-playbooks/cinder.yml | 122 ----- playbooks/common-playbooks/neutron.yml | 95 ---- playbooks/common-tasks/ceph-server.yml | 49 -- playbooks/common-tasks/dynamic-address-fact.yml | 38 -- playbooks/common-tasks/dynamic-grouping.yml | 24 - playbooks/common-tasks/haproxy-endpoint-manage.yml | 31 -- playbooks/common-tasks/os-log-dir-setup.yml | 44 -- .../common-tasks/remove_container_journal.yml | 23 - playbooks/common-tasks/unbound-clients.yml | 65 --- playbooks/containers-deploy.yml | 6 +- playbooks/containers-lxc-create.yml | 64 +-- playbooks/containers-lxc-destroy.yml | 76 +-- playbooks/containers-lxc-host.yml | 45 +- playbooks/defaults/distro_install.yml | 37 -- playbooks/defaults/source_install.yml | 38 -- playbooks/galera-install.yml | 68 +-- playbooks/haproxy-install.yml | 53 +-- playbooks/healthcheck-hosts.yml | 115 +---- playbooks/healthcheck-infrastructure.yml | 395 +--------------- playbooks/healthcheck-openstack.yml | 516 +-------------------- playbooks/memcached-install.yml | 30 +- playbooks/openstack-hosts-setup.yml | 59 +-- playbooks/openstack-resources.yml | 13 +- playbooks/os-adjutant-install.yml | 67 +-- playbooks/os-aodh-install.yml | 72 +-- playbooks/os-barbican-install.yml | 71 +-- playbooks/os-blazar-install.yml | 75 +-- playbooks/os-ceilometer-install.yml | 33 +- playbooks/os-cinder-install.yml | 53 +-- playbooks/os-cloudkitty-install.yml | 68 +-- playbooks/os-designate-install.yml | 71 +-- playbooks/os-glance-install.yml | 87 +--- playbooks/os-gnocchi-install.yml | 75 +-- playbooks/os-heat-install.yml | 74 +-- playbooks/os-horizon-install.yml | 73 +-- playbooks/os-ironic-install.yml | 74 +-- playbooks/os-keystone-install.yml | 186 +------- playbooks/os-magnum-install.yml | 72 +-- playbooks/os-manila-install.yml | 92 +--- playbooks/os-masakari-install.yml | 103 +--- playbooks/os-mistral-install.yml | 75 +-- playbooks/os-neutron-install.yml | 58 +-- playbooks/os-nova-install.yml | 236 +--------- playbooks/os-octavia-install.yml | 74 +-- playbooks/os-placement-install.yml | 74 +-- playbooks/os-rally-install.yml | 26 +- playbooks/os-skyline-install.yml | 45 +- playbooks/os-swift-install.yml | 56 +-- playbooks/os-swift-sync.yml | 13 +- playbooks/os-tacker-install.yml | 63 +-- playbooks/os-tempest-install.yml | 31 +- playbooks/os-trove-install.yml | 71 +-- playbooks/os-zun-install.yml | 90 +--- playbooks/qdrouterd-install.yml | 3 +- playbooks/rabbitmq-install.yml | 95 +--- playbooks/repo-install.yml | 68 +-- playbooks/security-hardening.yml | 32 +- playbooks/setup-hosts.yml | 27 +- playbooks/setup-infrastructure.yml | 47 +- playbooks/setup-openstack.yml | 99 +--- playbooks/unbound-install.yml | 39 +- playbooks/utility-install.yml | 161 +------ playbooks/zookeeper-install.yml | 32 +- ...urity-group-rules-support-99470d209ffa97c4.yaml | 5 + .../add-magnum-integration-a7a21c4feae9cbeb.yaml | 6 + .../align_ceph_repo_vars-222f6af6a7d349a2.yaml | 18 + .../notes/amphora_bfv_quota-8adc0a3c886921ba.yaml | 17 + .../apache_mpm_alignment-41063895f0f9c024.yaml | 11 + .../bash_autocompletion-f44059352827c3a6.yaml | 10 + .../notes/ceph-ansible-8-3923428844537c1b.yaml | 19 + ...r_v2_endpoint_deprecation-869f74090121154e.yaml | 31 ++ ...cloudkitty_storage_config-48e154cc2b549238.yaml | 5 + .../notes/custom_ssh_config-46c443e077b3386b.yaml | 7 + ...ble_neutron_uwsgi_default-1763a0cbc17f23c8.yaml | 13 + .../drop_debian_bullseye-c93d0e7e52170780.yaml | 4 + .../erlang_version_spec-ee21ffe0a1d34576.yaml | 12 + .../federated_domain_names-4e169b8b9a947940.yaml | 13 + .../notes/fwaas-dashboard-4bc47b7c284dad68.yaml | 6 + .../notes/ha_queues_removed-4e4d3fe5ed74a242.yaml | 16 + ...aproxy_hosts_envd_renamed-56edb1aa3f56539b.yaml | 16 + .../haproxy_limit_hosts-0f529297c9748eb7.yaml | 20 + ...tbeat_in_pthread_to_false-4bde8fca9a332805.yaml | 8 + .../notes/horizon_apache_mpm-2a34436635f1bef9.yaml | 8 + ...zon_extend_local_settings-9e062b515de94b24.yaml | 7 + ...rnel-ramdisk-image-format-3edd5c7479ebd32a.yaml | 7 + ...tone_external_ssl-removal-5d972299f98dcc32.yaml | 8 + .../l3_agent_extensions_var-79150960642ce551.yaml | 5 + ...akari_service_type_rename-4a86255372f8a3b5.yaml | 5 + .../notes/neutron_default_az-51715b4d836b5802.yaml | 8 + .../neutron_uwsgi_re-enabled-d75d0362aaf32278.yaml | 24 + .../octavia-dhcp-disable-d575d932a1959652.yaml | 6 + ...tavia_ssh_keypair_options-a6f9cfeb51bdfefa.yaml | 16 + .../playbooks_to_collections-c252770d24be9bb7.yaml | 26 ++ .../quorum_queues_default-2f633cd0d5ee2037.yaml | 5 +- .../notes/rabbitmq_4-0d92471180caa8ea.yaml | 16 + .../rabbitmq_repo_deb822-b47ef07ff462193f.yaml | 16 + ...rabbitmq_upgrade_refactor-4dfd860f76610a28.yaml | 9 + .../rename_haproxy_vip_binds-dda8197aaf607b53.yaml | 7 + .../replace_nginx_apache-f62e453f44acf790.yaml | 8 + .../return_amphora_provider-05deae1d173dbb1f.yaml | 5 + .../skyline_not_infra_hosts-58190dad1c43ed9a.yaml | 11 + .../switch-to-rabbitmq-ppa-671004eb2092aa3b.yaml | 12 + .../ubuntu_noble_support-d4d741bdfdf1d4ef.yaml | 4 + ...r_policy_location_gnocchi-6cc4bb4018456c39.yaml | 6 + ...env_build_facts_gathering-9a85f72324d6e7e0.yaml | 6 + releasenotes/source/2024.1.rst | 6 + releasenotes/source/index.rst | 1 + releasenotes/source/zed.rst | 2 +- scripts/bash-completion | 93 ++++ scripts/bootstrap-ansible.sh | 14 +- scripts/gate-check-commit.sh | 16 +- scripts/log-collect.sh | 4 + scripts/openstack-ansible.rc | 1 - scripts/rabbitmq-test.py | 47 -- scripts/run-upgrade.sh | 4 +- .../galera-cluster-rolling-restart.yml | 2 +- .../upgrade-utilities/nova-restore-compute-id.yml | 3 +- .../bootstrap-host/tasks/check-requirements.yml | 8 +- .../bootstrap-host/tasks/prepare_aio_config.yml | 8 +- .../templates/user_variables.aio.yml.j2 | 17 +- .../templates/user_variables_ceph.yml.j2 | 2 +- tox.ini | 2 +- zuul.d/jobs.yaml | 299 ++++++------ zuul.d/playbooks/post.yml | 1 - zuul.d/playbooks/pre-gate-cleanup.yml | 26 ++ zuul.d/playbooks/pre-gate-scenario.yml | 10 +- zuul.d/project-templates.yaml | 93 ++-- 219 files changed, 1893 insertions(+), 6222 deletions(-)

1 0